Input: ALPS - add support for "Dolphin" devices

This adds support for another flavor of ALPS protocol used in newer
"Dolphin" devices.
Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

drivers/input/mouse/alps.c

@@ -276,6 +276,57 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse)
 	input_sync(dev);
 }
 
+/*
+ * Process bitmap data for V5 protocols. Return value is null.
+ *
+ * The bitmaps don't have enough data to track fingers, so this function
+ * only generates points representing a bounding box of at most two contacts.
+ * These two points are returned in x1, y1, x2, and y2.
+ */
+static void alps_process_bitmap_dolphin(struct alps_data *priv,
+					struct alps_fields *fields,
+					int *x1, int *y1, int *x2, int *y2)
+{
+	int box_middle_x, box_middle_y;
+	unsigned int x_map, y_map;
+	unsigned char start_bit, end_bit;
+	unsigned char x_msb, x_lsb, y_msb, y_lsb;
+
+	x_map = fields->x_map;
+	y_map = fields->y_map;
+
+	if (!x_map || !y_map)
+		return;
+
+	/* Get Most-significant and Least-significant bit */
+	x_msb = fls(x_map);
+	x_lsb = ffs(x_map);
+	y_msb = fls(y_map);
+	y_lsb = ffs(y_map);
+
+	/* Most-significant bit should never exceed max sensor line number */
+	if (x_msb > priv->x_bits || y_msb > priv->y_bits)
+		return;
+
+	*x1 = *y1 = *x2 = *y2 = 0;
+
+	if (fields->fingers > 1) {
+		start_bit = priv->x_bits - x_msb;
+		end_bit = priv->x_bits - x_lsb;
+		box_middle_x = (priv->x_max * (start_bit + end_bit)) /
+				(2 * (priv->x_bits - 1));
+
+		start_bit = y_lsb - 1;
+		end_bit = y_msb - 1;
+		box_middle_y = (priv->y_max * (start_bit + end_bit)) /
+				(2 * (priv->y_bits - 1));
+		*x1 = fields->x;
+		*y1 = fields->y;
+		*x2 = 2 * box_middle_x - *x1;
+		*y2 = 2 * box_middle_y - *y1;
+	}
+}
+
 /*
  * Process bitmap data from v3 and v4 protocols. Returns the number of
  * fingers detected. A return value of 0 means at least one of the
@@ -481,7 +532,8 @@ static void alps_decode_buttons_v3(struct alps_fields *f, unsigned char *p)
 	f->ts_middle = !!(p[3] & 0x40);
 }
 
-static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p)
+static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p,
+				 struct psmouse *psmouse)
 {
 	f->first_mp = !!(p[4] & 0x40);
 	f->is_mp = !!(p[0] & 0x40);
@@ -502,48 +554,61 @@ static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p)
 	alps_decode_buttons_v3(f, p);
 }
 
-static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p)
+static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p,
+				 struct psmouse *psmouse)
 {
-	alps_decode_pinnacle(f, p);
+	alps_decode_pinnacle(f, p, psmouse);
 
 	f->x_map |= (p[5] & 0x10) << 11;
 	f->y_map |= (p[5] & 0x20) << 6;
 }
 
-static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p)
+static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p,
+				struct psmouse *psmouse)
 {
+	u64 palm_data = 0;
+	struct alps_data *priv = psmouse->private;
+
 	f->first_mp = !!(p[0] & 0x02);
 	f->is_mp = !!(p[0] & 0x20);
 
-	f->fingers = ((p[0] & 0x6) >> 1 |
-		     (p[0] & 0x10) >> 2);
-	f->x_map = ((p[2] & 0x60) >> 5) |
-		   ((p[4] & 0x7f) << 2) |
-		   ((p[5] & 0x7f) << 9) |
-		   ((p[3] & 0x07) << 16) |
-		   ((p[3] & 0x70) << 15) |
-		   ((p[0] & 0x01) << 22);
-	f->y_map = (p[1] & 0x7f) |
-		   ((p[2] & 0x1f) << 7);
-
+	if (!f->is_mp) {
 		f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
 		f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
 		f->z = (p[0] & 4) ? 0 : p[5] & 0x7f;
-
 		alps_decode_buttons_v3(f, p);
+	} else {
+		f->fingers = ((p[0] & 0x6) >> 1 |
+		     (p[0] & 0x10) >> 2);
+
+		palm_data = (p[1] & 0x7f) |
+			    ((p[2] & 0x7f) << 7) |
+			    ((p[4] & 0x7f) << 14) |
+			    ((p[5] & 0x7f) << 21) |
+			    ((p[3] & 0x07) << 28) |
+			    (((u64)p[3] & 0x70) << 27) |
+			    (((u64)p[0] & 0x01) << 34);
+
+		/* Y-profile is stored in P(0) to p(n-1), n = y_bits; */
+		f->y_map = palm_data & (BIT(priv->y_bits) - 1);
+
+		/* X-profile is stored in p(n) to p(n+m-1), m = x_bits; */
+		f->x_map = (palm_data >> priv->y_bits) &
+			   (BIT(priv->x_bits) - 1);
+	}
 }
 
-static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
+static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
 {
 	struct alps_data *priv = psmouse->private;
 	unsigned char *packet = psmouse->packet;
 	struct input_dev *dev = psmouse->dev;
 	struct input_dev *dev2 = priv->dev2;
 	int x1 = 0, y1 = 0, x2 = 0, y2 = 0;
-	int fingers = 0, bmap_fingers;
-	struct alps_fields f;
+	int fingers = 0, bmap_fn;
+	struct alps_fields f = {0};
 
-	priv->decode_fields(&f, packet);
+	priv->decode_fields(&f, packet, psmouse);
 
 	/*
 	 * There's no single feature of touchpad position and bitmap packets
@@ -560,19 +625,38 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
 		 */
 		if (f.is_mp) {
 			fingers = f.fingers;
-			bmap_fingers = alps_process_bitmap(priv,
-							   f.x_map, f.y_map,
-							   &x1, &y1, &x2, &y2);
+			if (priv->proto_version == ALPS_PROTO_V3) {
+				bmap_fn = alps_process_bitmap(priv, f.x_map,
+							      f.y_map, &x1, &y1,
+							      &x2, &y2);
 
 				/*
 				 * We shouldn't report more than one finger if
 				 * we don't have two coordinates.
 				 */
-			if (fingers > 1 && bmap_fingers < 2)
-				fingers = bmap_fingers;
+				if (fingers > 1 && bmap_fn < 2)
+					fingers = bmap_fn;
 
 				/* Now process position packet */
-			priv->decode_fields(&f, priv->multi_data);
+				priv->decode_fields(&f, priv->multi_data,
+						    psmouse);
+			} else {
+				/*
+				 * Because Dolphin uses position packet's
+				 * coordinate data as Pt1 and uses it to
+				 * calculate Pt2, so we need to do position
+				 * packet decode first.
+				 */
+				priv->decode_fields(&f, priv->multi_data,
+						    psmouse);
+
+				/*
+				 * Since Dolphin's finger number is reliable,
+				 * there is no need to compare with bmap_fn.
+				 */
+				alps_process_bitmap_dolphin(priv, &f, &x1, &y1,
+							    &x2, &y2);
+			}
 		} else {
 			priv->multi_packet = 0;
 		}
@@ -662,7 +746,7 @@ static void alps_process_packet_v3(struct psmouse *psmouse)
 		return;
 	}
 
-	alps_process_touchpad_packet_v3(psmouse);
+	alps_process_touchpad_packet_v3_v5(psmouse);
 }
 
 static void alps_process_packet_v6(struct psmouse *psmouse)
@@ -1709,6 +1793,52 @@ static int alps_hw_init_v4(struct psmouse *psmouse)
 	return -1;
 }
 
+static int alps_dolphin_get_device_area(struct psmouse *psmouse,
+					struct alps_data *priv)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	unsigned char param[4] = {0};
+	int num_x_electrode, num_y_electrode;
+
+	if (alps_enter_command_mode(psmouse))
+		return -1;
+
+	param[0] = 0x0a;
+	if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
+	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) ||
+	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) ||
+	    ps2_command(ps2dev, &param[0], PSMOUSE_CMD_SETRATE) ||
+	    ps2_command(ps2dev, &param[0], PSMOUSE_CMD_SETRATE))
+		return -1;
+
+	if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
+		return -1;
+
+	/*
+	 * Dolphin's sensor line number is not fixed. It can be calculated
+	 * by adding the device's register value with DOLPHIN_PROFILE_X/YOFFSET.
+	 * Further more, we can get device's x_max and y_max by multiplying
+	 * sensor line number with DOLPHIN_COUNT_PER_ELECTRODE.
+	 *
+	 * e.g. When we get register's sensor_x = 11 & sensor_y = 8,
+	 *	real sensor line number X = 11 + 8 = 19, and
+	 *	real sensor line number Y = 8 + 1 = 9.
+	 *	So, x_max = (19 - 1) * 64 = 1152, and
+	 *	    y_max = (9 - 1) * 64 = 512.
+	 */
+	num_x_electrode = DOLPHIN_PROFILE_XOFFSET + (param[2] & 0x0F);
+	num_y_electrode = DOLPHIN_PROFILE_YOFFSET + ((param[2] >> 4) & 0x0F);
+	priv->x_bits = num_x_electrode;
+	priv->y_bits = num_y_electrode;
+	priv->x_max = (num_x_electrode - 1) * DOLPHIN_COUNT_PER_ELECTRODE;
+	priv->y_max = (num_y_electrode - 1) * DOLPHIN_COUNT_PER_ELECTRODE;
+
+	if (alps_exit_command_mode(psmouse))
+		return -1;
+
+	return 0;
+}
+
 static int alps_hw_init_dolphin_v1(struct psmouse *psmouse)
 {
 	struct ps2dev *ps2dev = &psmouse->ps2dev;
@@ -1763,13 +1893,13 @@ static void alps_set_defaults(struct alps_data *priv)
 		break;
 	case ALPS_PROTO_V5:
 		priv->hw_init = alps_hw_init_dolphin_v1;
-		priv->process_packet = alps_process_packet_v3;
+		priv->process_packet = alps_process_touchpad_packet_v3_v5;
 		priv->decode_fields = alps_decode_dolphin;
 		priv->set_abs_params = alps_set_abs_params_mt;
 		priv->nibble_commands = alps_v3_nibble_commands;
 		priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
 		priv->byte0 = 0xc8;
-		priv->mask0 = 0xc8;
+		priv->mask0 = 0xd8;
 		priv->flags = 0;
 		priv->x_max = 1360;
 		priv->y_max = 660;
@@ -1845,10 +1975,12 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
 	if (alps_match_table(psmouse, priv, e7, ec) == 0) {
 		return 0;
 	} else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 &&
-		   ec[0] == 0x73 && ec[1] == 0x01) {
+		   ec[0] == 0x73 && (ec[1] == 0x01 || ec[1] == 0x02)) {
 		priv->proto_version = ALPS_PROTO_V5;
 		alps_set_defaults(priv);
-
+		if (alps_dolphin_get_device_area(psmouse, priv))
+			return -EIO;
+		else
 			return 0;
 	} else if (ec[0] == 0x88 && ec[1] == 0x08) {
 		priv->proto_version = ALPS_PROTO_V3;

drivers/input/mouse/alps.h

@@ -19,6 +19,10 @@
 #define ALPS_PROTO_V5	5
 #define ALPS_PROTO_V6	6
 
+#define DOLPHIN_COUNT_PER_ELECTRODE	64
+#define DOLPHIN_PROFILE_XOFFSET		8	/* x-electrode offset */
+#define DOLPHIN_PROFILE_YOFFSET		1	/* y-electrode offset */
+
 /**
  * struct alps_model_info - touchpad ID table
  * @signature: E7 response string to match.
@@ -146,7 +150,8 @@ struct alps_data {
 
 	int (*hw_init)(struct psmouse *psmouse);
 	void (*process_packet)(struct psmouse *psmouse);
-	void (*decode_fields)(struct alps_fields *f, unsigned char *p);
+	void (*decode_fields)(struct alps_fields *f, unsigned char *p,
+			      struct psmouse *psmouse);
 	void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1);
 
 	int prev_fin;