Commit ee905d0c authored by Ville Syrjala's avatar Ville Syrjala Committed by Linus Torvalds

atyfb: fix alignment for block writes

Block writes require 64 byte alignment.  Since block writes could be used
with SGRAM or WRAM also refine the memory type detection to check for
either type before deciding to use the 64 byte alignment.
Signed-off-by: default avatarVille Syrjala <syrjala@sci.fi>
Tested-by: default avatarMikulas Patocka <mpatocka@redhat.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent eafad22a
......@@ -219,6 +219,7 @@ struct atyfb_par {
#define M64F_XL_DLL 0x00080000
#define M64F_MFB_FORCE_4 0x00100000
#define M64F_HW_TRIPLE 0x00200000
#define M64F_XL_MEM 0x00400000
/*
* Register access
*/
......
......@@ -363,8 +363,8 @@ static unsigned long phys_guiregbase[FB_MAX] __devinitdata = { 0, };
#define ATI_CHIP_264GTPRO (ATI_MODERN_SET | M64F_SDRAM_MAGIC_PLL | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D)
#define ATI_CHIP_264LTPRO (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D)
#define ATI_CHIP_264XL (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4)
#define ATI_CHIP_MOBILITY (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_MOBIL_BUS)
#define ATI_CHIP_264XL (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_XL_MEM)
#define ATI_CHIP_MOBILITY (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_XL_MEM | M64F_MOBIL_BUS)
static struct {
u16 pci_id;
......@@ -541,6 +541,7 @@ static char ram_edo[] __devinitdata = "EDO";
static char ram_sdram[] __devinitdata = "SDRAM (1:1)";
static char ram_sgram[] __devinitdata = "SGRAM (1:1)";
static char ram_sdram32[] __devinitdata = "SDRAM (2:1) (32-bit)";
static char ram_wram[] __devinitdata = "WRAM";
static char ram_off[] __devinitdata = "OFF";
#endif /* CONFIG_FB_ATY_CT */
......@@ -554,6 +555,10 @@ static char *aty_gx_ram[8] __devinitdata = {
#ifdef CONFIG_FB_ATY_CT
static char *aty_ct_ram[8] __devinitdata = {
ram_off, ram_dram, ram_edo, ram_edo,
ram_sdram, ram_sgram, ram_wram, ram_resv
};
static char *aty_xl_ram[8] __devinitdata = {
ram_off, ram_dram, ram_edo, ram_edo,
ram_sdram, ram_sgram, ram_sdram32, ram_resv
};
......@@ -762,6 +767,17 @@ static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc)
#endif /* CONFIG_FB_ATY_GENERIC_LCD */
}
static u32 calc_line_length(struct atyfb_par *par, u32 vxres, u32 bpp)
{
u32 line_length = vxres * bpp / 8;
if (par->ram_type == SGRAM ||
(!M64_HAS(XL_MEM) && par->ram_type == WRAM))
line_length = (line_length + 63) & ~63;
return line_length;
}
static int aty_var_to_crtc(const struct fb_info *info,
const struct fb_var_screeninfo *var, struct crtc *crtc)
{
......@@ -771,13 +787,14 @@ static int aty_var_to_crtc(const struct fb_info *info,
u32 h_total, h_disp, h_sync_strt, h_sync_end, h_sync_dly, h_sync_wid, h_sync_pol;
u32 v_total, v_disp, v_sync_strt, v_sync_end, v_sync_wid, v_sync_pol, c_sync;
u32 pix_width, dp_pix_width, dp_chain_mask;
u32 line_length;
/* input */
xres = var->xres;
xres = (var->xres + 7) & ~7;
yres = var->yres;
vxres = var->xres_virtual;
vxres = (var->xres_virtual + 7) & ~7;
vyres = var->yres_virtual;
xoffset = var->xoffset;
xoffset = (var->xoffset + 7) & ~7;
yoffset = var->yoffset;
bpp = var->bits_per_pixel;
if (bpp == 16)
......@@ -829,7 +846,9 @@ static int aty_var_to_crtc(const struct fb_info *info,
} else
FAIL("invalid bpp");
if (vxres * vyres * bpp / 8 > info->fix.smem_len)
line_length = calc_line_length(par, vxres, bpp);
if (vyres * line_length > info->fix.smem_len)
FAIL("not enough video RAM");
h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1;
......@@ -971,7 +990,9 @@ static int aty_var_to_crtc(const struct fb_info *info,
crtc->xoffset = xoffset;
crtc->yoffset = yoffset;
crtc->bpp = bpp;
crtc->off_pitch = ((yoffset*vxres+xoffset)*bpp/64) | (vxres<<19);
crtc->off_pitch =
((yoffset * line_length + xoffset * bpp / 8) / 8) |
((line_length / bpp) << 22);
crtc->vline_crnt_vline = 0;
crtc->h_tot_disp = h_total | (h_disp<<16);
......@@ -1396,7 +1417,9 @@ static int atyfb_set_par(struct fb_info *info)
}
aty_st_8(DAC_MASK, 0xff, par);
info->fix.line_length = var->xres_virtual * var->bits_per_pixel/8;
info->fix.line_length = calc_line_length(par, var->xres_virtual,
var->bits_per_pixel);
info->fix.visual = var->bits_per_pixel <= 8 ?
FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
......@@ -1507,10 +1530,12 @@ static void set_off_pitch(struct atyfb_par *par, const struct fb_info *info)
{
u32 xoffset = info->var.xoffset;
u32 yoffset = info->var.yoffset;
u32 vxres = par->crtc.vxres;
u32 line_length = info->fix.line_length;
u32 bpp = info->var.bits_per_pixel;
par->crtc.off_pitch = ((yoffset * vxres + xoffset) * bpp / 64) | (vxres << 19);
par->crtc.off_pitch =
((yoffset * line_length + xoffset * bpp / 8) / 8) |
((line_length / bpp) << 22);
}
......@@ -2203,7 +2228,7 @@ static void __devinit aty_calc_mem_refresh(struct atyfb_par *par, int xclk)
const int *refresh_tbl;
int i, size;
if (IS_XL(par->pci_id) || IS_MOBILITY(par->pci_id)) {
if (M64_HAS(XL_MEM)) {
refresh_tbl = ragexl_tbl;
size = ARRAY_SIZE(ragexl_tbl);
} else {
......@@ -2337,6 +2362,9 @@ static int __devinit aty_init(struct fb_info *info)
par->pll_ops = &aty_pll_ct;
par->bus_type = PCI;
par->ram_type = (aty_ld_le32(CNFG_STAT0, par) & 0x07);
if (M64_HAS(XL_MEM))
ramname = aty_xl_ram[par->ram_type];
else
ramname = aty_ct_ram[par->ram_type];
/* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */
if (par->pll_limits.mclk == 67 && par->ram_type < SDRAM)
......
......@@ -63,14 +63,17 @@ static void reset_GTC_3D_engine(const struct atyfb_par *par)
void aty_init_engine(struct atyfb_par *par, struct fb_info *info)
{
u32 pitch_value;
u32 vxres;
/* determine modal information from global mode structure */
pitch_value = info->var.xres_virtual;
pitch_value = info->fix.line_length / (info->var.bits_per_pixel / 8);
vxres = info->var.xres_virtual;
if (info->var.bits_per_pixel == 24) {
/* In 24 bpp, the engine is in 8 bpp - this requires that all */
/* horizontal coordinates and widths must be adjusted */
pitch_value *= 3;
vxres *= 3;
}
/* On GTC (RagePro), we need to reset the 3D engine before */
......@@ -133,7 +136,7 @@ void aty_init_engine(struct atyfb_par *par, struct fb_info *info)
aty_st_le32(SC_LEFT, 0, par);
aty_st_le32(SC_TOP, 0, par);
aty_st_le32(SC_BOTTOM, par->crtc.vyres - 1, par);
aty_st_le32(SC_RIGHT, pitch_value - 1, par);
aty_st_le32(SC_RIGHT, vxres - 1, par);
/* set background color to minimum value (usually BLACK) */
aty_st_le32(DP_BKGD_CLR, 0, par);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment