Commit f0ef6748 authored by Amitkumar Karwar's avatar Amitkumar Karwar Committed by Marcel Holtmann

Bluetooth: btmrvl: add sd8997 chipset support

This patch adds support for Marvell's new chipset SD8997.
Register offsets and supported feature flags are updated.
Signed-off-by: default avatarZhaoyang Liu <liuzy@marvell.com>
Signed-off-by: default avatarCathy Luo <cluo@marvell.com>
Signed-off-by: default avatarAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
parent 53d6cfa5
......@@ -275,7 +275,7 @@ config BT_MRVL
The core driver to support Marvell Bluetooth devices.
This driver is required if you want to support
Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897.
Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8997.
Say Y here to compile Marvell Bluetooth driver
into the kernel or say M to compile it as module.
......@@ -289,7 +289,7 @@ config BT_MRVL_SDIO
The driver for Marvell Bluetooth chipsets with SDIO interface.
This driver is required if you want to use Marvell Bluetooth
devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897
devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8997
chipsets are supported.
Say Y here to compile support for Marvell BT-over-SDIO driver
......
......@@ -146,6 +146,29 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8897 = {
.fw_dump_end = 0xea,
};
static const struct btmrvl_sdio_card_reg btmrvl_reg_8997 = {
.cfg = 0x00,
.host_int_mask = 0x08,
.host_intstatus = 0x0c,
.card_status = 0x5c,
.sq_read_base_addr_a0 = 0xf8,
.sq_read_base_addr_a1 = 0xf9,
.card_revision = 0xc8,
.card_fw_status0 = 0xe8,
.card_fw_status1 = 0xe9,
.card_rx_len = 0xea,
.card_rx_unit = 0xeb,
.io_port_0 = 0xe4,
.io_port_1 = 0xe5,
.io_port_2 = 0xe6,
.int_read_to_clear = true,
.host_int_rsr = 0x04,
.card_misc_cfg = 0xD8,
.fw_dump_ctrl = 0xf0,
.fw_dump_start = 0xf1,
.fw_dump_end = 0xf8,
};
static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
.helper = "mrvl/sd8688_helper.bin",
.firmware = "mrvl/sd8688.bin",
......@@ -191,6 +214,15 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
.supports_fw_dump = true,
};
static const struct btmrvl_sdio_device btmrvl_sdio_sd8997 = {
.helper = NULL,
.firmware = "mrvl/sd8997_uapsta.bin",
.reg = &btmrvl_reg_8997,
.support_pscan_win_report = true,
.sd_blksz_fw_dl = 256,
.supports_fw_dump = true,
};
static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8688 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
......@@ -210,6 +242,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8897 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E),
.driver_data = (unsigned long)&btmrvl_sdio_sd8897 },
/* Marvell SD8997 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9142),
.driver_data = (unsigned long)&btmrvl_sdio_sd8997 },
{ } /* Terminating entry */
};
......@@ -1622,3 +1657,4 @@ MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8887_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8997_uapsta.bin");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment