Merge remote-tracking branches 'asoc/topic/stm32', 'asoc/topic/sunxi',...

Merge remote-tracking branches 'asoc/topic/stm32', 'asoc/topic/sunxi', 'asoc/topic/tlv320dac31xx', 'asoc/topic/topology' and 'asoc/topic/wm-adsp' into asoc-next

Documentation/devicetree/bindings/sound/st,stm32-i2s.txt

+STMicroelectronics STM32 SPI/I2S Controller
+
+The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
+Only some SPI instances support I2S.
+
+Required properties:
+  - compatible: Must be "st,stm32h7-i2s"
+  - reg: Offset and length of the device's register set.
+  - interrupts: Must contain the interrupt line id.
+  - clocks: Must contain phandle and clock specifier pairs for each entry
+	in clock-names.
+  - clock-names: Must contain "i2sclk", "pclk", "x8k" and "x11k".
+	"i2sclk": clock which feeds the internal clock generator
+	"pclk": clock which feeds the peripheral bus interface
+	"x8k": I2S parent clock for sampling rates multiple of 8kHz.
+	"x11k": I2S parent clock for sampling rates multiple of 11.025kHz.
+  - dmas: DMA specifiers for tx and rx dma.
+    See Documentation/devicetree/bindings/dma/stm32-dma.txt.
+  - dma-names: Identifier for each DMA request line. Must be "tx" and "rx".
+  - pinctrl-names: should contain only value "default"
+  - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt
+
+Optional properties:
+  - resets: Reference to a reset controller asserting the reset controller
+
+The device node should contain one 'port' child node with one child 'endpoint'
+node, according to the bindings defined in Documentation/devicetree/bindings/
+graph.txt.
+
+Example:
+sound_card {
+	compatible = "audio-graph-card";
+	dais = <&i2s2_port>;
+};
+
+i2s2: audio-controller@40003800 {
+	compatible = "st,stm32h7-i2s";
+	reg = <0x40003800 0x400>;
+	interrupts = <36>;
+	clocks = <&rcc PCLK1>, <&rcc SPI2_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
+	clock-names = "pclk", "i2sclk",  "x8k", "x11k";
+	dmas = <&dmamux2 2 39 0x400 0x1>,
+           <&dmamux2 3 40 0x400 0x1>;
+	dma-names = "rx", "tx";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s2>;
+
+	i2s2_port: port@0 {
+		cpu_endpoint: endpoint {
+			remote-endpoint = <&codec_endpoint>;
+			format = "i2s";
+		};
+	};
+};
+
+audio-codec {
+	codec_port: port@0 {
+		codec_endpoint: endpoint {
+			remote-endpoint = <&cpu_endpoint>;
+		};
+	};
+};

Documentation/devicetree/bindings/sound/st,stm32-sai.txt

@@ -6,7 +6,7 @@ The SAI contains two independent audio sub-blocks. Each sub-block has
 its own clock generator and I/O lines controller.
 
 Required properties:
-  - compatible: Should be "st,stm32f4-sai"
+  - compatible: Should be "st,stm32f4-sai" or "st,stm32h7-sai"
   - reg: Base address and size of SAI common register set.
   - clocks: Must contain phandle and clock specifier pairs for each entry
 	in clock-names.
@@ -36,6 +36,10 @@ SAI subnodes required properties:
   - pinctrl-names: should contain only value "default"
   - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt
 
+The device node should contain one 'port' child node with one child 'endpoint'
+node, according to the bindings defined in Documentation/devicetree/bindings/
+graph.txt.
+
 Example:
 sound_card {
 	compatible = "audio-graph-card";
@@ -43,38 +47,29 @@ sound_card {
 };
 
 sai1: sai1@40015800 {
-	compatible = "st,stm32f4-sai";
+	compatible = "st,stm32h7-sai";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	ranges;
+	ranges = <0 0x40015800 0x400>;
 	reg = <0x40015800 0x4>;
-	clocks = <&rcc 1 CLK_SAIQ_PDIV>, <&rcc 1 CLK_I2SQ_PDIV>;
+	clocks = <&rcc PLL1_Q>, <&rcc PLL2_P>;
 	clock-names = "x8k", "x11k";
 	interrupts = <87>;
 
-	sai1b: audio-controller@40015824 {
-		#sound-dai-cells = <0>;
-		compatible = "st,stm32-sai-sub-b";
-		reg = <0x40015824 0x1C>;
-		clocks = <&rcc 1 CLK_SAI2>;
+	sai1a: audio-controller@40015804 {
+		compatible = "st,stm32-sai-sub-a";
+		reg = <0x4 0x1C>;
+		clocks = <&rcc SAI1_CK>;
 		clock-names = "sai_ck";
-		dmas = <&dma2 5 0 0x400 0x0>;
+		dmas = <&dmamux1 1 87 0x400 0x0>;
 		dma-names = "tx";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sai1b>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		pinctrl-0 = <&pinctrl_sai1a>;
 
-			sai1b_port: port@0 {
-				reg = <0>;
+		sai1b_port: port {
 			cpu_endpoint: endpoint {
 				remote-endpoint = <&codec_endpoint>;
-					audio-graph-card,format = "i2s";
-					audio-graph-card,bitclock-master = <&codec_endpoint>;
-					audio-graph-card,frame-master = <&codec_endpoint>;
-				};
+				format = "i2s";
 			};
 		};
 	};

Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt

+STMicroelectronics STM32 S/PDIF receiver (SPDIFRX).
+
+The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
+IEC-60958 and IEC-61937.
+
+Required properties:
+  - compatible: should be "st,stm32h7-spdifrx"
+  - reg: cpu DAI IP base address and size
+  - clocks: must contain an entry for kclk (used as S/PDIF signal reference)
+  - clock-names: must contain "kclk"
+  - interrupts: cpu DAI interrupt line
+  - dmas: DMA specifiers for audio data DMA and iec control flow DMA
+    See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt
+  - dma-names: two dmas have to be defined, "rx" and "rx-ctrl"
+
+Optional properties:
+  - resets: Reference to a reset controller asserting the SPDIFRX
+
+The device node should contain one 'port' child node with one child 'endpoint'
+node, according to the bindings defined in Documentation/devicetree/bindings/
+graph.txt.
+
+Example:
+spdifrx: spdifrx@40004000 {
+	compatible = "st,stm32h7-spdifrx";
+	reg = <0x40004000 0x400>;
+	clocks = <&rcc SPDIFRX_CK>;
+	clock-names = "kclk";
+	interrupts = <97>;
+	dmas = <&dmamux1 2 93 0x400 0x0>,
+	       <&dmamux1 3 94 0x400 0x0>;
+	dma-names = "rx", "rx-ctrl";
+	pinctrl-0 = <&spdifrx_pins>;
+	pinctrl-names = "default";
+
+	spdifrx_port: port {
+		cpu_endpoint: endpoint {
+			remote-endpoint = <&codec_endpoint>;
+		};
+	};
+};
+
+spdif_in: spdif-in {
+	compatible = "linux,spdif-dir";
+
+	codec_port: port {
+		codec_endpoint: endpoint {
+			remote-endpoint = <&cpu_endpoint>;
+		};
+	};
+};
+
+soundcard {
+	compatible = "audio-graph-card";
+	dais = <&spdifrx_port>;
+};

Documentation/devicetree/bindings/sound/sun4i-codec.txt

@@ -7,6 +7,7 @@ Required properties:
 		- "allwinner,sun7i-a20-codec"
 		- "allwinner,sun8i-a23-codec"
 		- "allwinner,sun8i-h3-codec"
+		- "allwinner,sun8i-v3s-codec"
 - reg: must contain the registers location and length
 - interrupts: must contain the codec interrupt
 - dmas: DMA channels for tx and rx dma. See the DMA client binding,
@@ -25,6 +26,7 @@ Required properties for the following compatibles:
 		- "allwinner,sun6i-a31-codec"
 		- "allwinner,sun8i-a23-codec"
 		- "allwinner,sun8i-h3-codec"
+		- "allwinner,sun8i-v3s-codec"
 - resets: phandle to the reset control for this device
 - allwinner,audio-routing: A list of the connections between audio components.
 			   Each entry is a pair of strings, the first being the
@@ -34,15 +36,15 @@ Required properties for the following compatibles:
 			   Audio pins on the SoC:
 			   "HP"
 			   "HPCOM"
-			   "LINEIN"
-			   "LINEOUT"	(not on sun8i-a23)
+			   "LINEIN"	(not on sun8i-v3s)
+			   "LINEOUT"	(not on sun8i-a23 or sun8i-v3s)
 			   "MIC1"
-			   "MIC2"
+			   "MIC2"	(not on sun8i-v3s)
 			   "MIC3"	(sun6i-a31 only)
 
 			   Microphone biases from the SoC:
 			   "HBIAS"
-			   "MBIAS"
+			   "MBIAS"	(not on sun8i-v3s)
 
 			   Board connectors:
 			   "Headphone"
@@ -55,6 +57,7 @@ Required properties for the following compatibles:
 Required properties for the following compatibles:
 		- "allwinner,sun8i-a23-codec"
 		- "allwinner,sun8i-h3-codec"
+		- "allwinner,sun8i-v3s-codec"
 - allwinner,codec-analog-controls: A phandle to the codec analog controls
 				   block in the PRCM.
 

Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt

@@ -4,6 +4,7 @@ Required properties:
 - compatible: must be one of the following compatibles:
 		- "allwinner,sun8i-a23-codec-analog"
 		- "allwinner,sun8i-h3-codec-analog"
+		- "allwinner,sun8i-v3s-codec-analog"
 
 Required properties if not a sub-node of the PRCM node:
 - reg: must contain the registers location and length

include/sound/soc-topology.h

@@ -28,6 +28,8 @@ struct snd_soc_component;
 struct snd_soc_tplg_pcm_fe;
 struct snd_soc_dapm_context;
 struct snd_soc_card;
+struct snd_kcontrol_new;
+struct snd_soc_dai_link;
 
 /* object scan be loaded and unloaded in groups with identfying indexes */
 #define SND_SOC_TPLG_INDEX_ALL	0	/* ID that matches all FW objects */
@@ -116,6 +118,9 @@ struct snd_soc_tplg_ops {
 	int (*widget_load)(struct snd_soc_component *,
 		struct snd_soc_dapm_widget *,
 		struct snd_soc_tplg_dapm_widget *);
+	int (*widget_ready)(struct snd_soc_component *,
+		struct snd_soc_dapm_widget *,
+		struct snd_soc_tplg_dapm_widget *);
 	int (*widget_unload)(struct snd_soc_component *,
 		struct snd_soc_dobj *);
 

sound/soc/codecs/tlv320aic31xx.c

@@ -1210,7 +1210,7 @@ static const struct snd_soc_dai_ops aic31xx_dai_ops = {
 
 static struct snd_soc_dai_driver dac31xx_dai_driver[] = {
 	{
-		.name = "tlv32dac31xx-hifi",
+		.name = "tlv320dac31xx-hifi",
 		.playback = {
 			.stream_name	 = "Playback",
 			.channels_min	 = 2,

sound/soc/codecs/wm_adsp.c

@@ -482,8 +482,6 @@ struct wm_coeff_ctl_ops {
 		    struct snd_ctl_elem_value *ucontrol);
 	int (*xput)(struct snd_kcontrol *kcontrol,
 		    struct snd_ctl_elem_value *ucontrol);
-	int (*xinfo)(struct snd_kcontrol *kcontrol,
-		     struct snd_ctl_elem_info *uinfo);
 };
 
 struct wm_coeff_ctl {
@@ -1890,7 +1888,7 @@ static void *wm_adsp_read_algs(struct wm_adsp *dsp, size_t n_algs,
 	}
 
 	if (be32_to_cpu(val) != 0xbedead)
-		adsp_warn(dsp, "Algorithm list end %x 0x%x != 0xbeadead\n",
+		adsp_warn(dsp, "Algorithm list end %x 0x%x != 0xbedead\n",
 			  pos + len, be32_to_cpu(val));
 
 	alg = kzalloc(len * 2, GFP_KERNEL | GFP_DMA);
@@ -2654,7 +2652,7 @@ int wm_adsp2_preloader_put(struct snd_kcontrol *kcontrol,
 		(struct soc_mixer_control *)kcontrol->private_value;
 	char preload[32];
 
-	snprintf(preload, ARRAY_SIZE(preload), "DSP%d Preload", mc->shift);
+	snprintf(preload, ARRAY_SIZE(preload), "DSP%u Preload", mc->shift);
 
 	dsp->preloaded = ucontrol->value.integer.value[0];
 

sound/soc/soc-topology.c

@@ -352,6 +352,17 @@ static int soc_tplg_widget_load(struct soc_tplg *tplg,
 	return 0;
 }
 
+/* optionally pass new dynamic widget to component driver. This is mainly for
+ * external widgets where we can assign private data/ops */
+static int soc_tplg_widget_ready(struct soc_tplg *tplg,
+	struct snd_soc_dapm_widget *w, struct snd_soc_tplg_dapm_widget *tplg_w)
+{
+	if (tplg->comp && tplg->ops && tplg->ops->widget_ready)
+		return tplg->ops->widget_ready(tplg->comp, w, tplg_w);
+
+	return 0;
+}
+
 /* pass DAI configurations to component driver for extra initialization */
 static int soc_tplg_dai_load(struct soc_tplg *tplg,
 	struct snd_soc_dai_driver *dai_drv)
@@ -1160,7 +1171,8 @@ static int soc_tplg_dapm_graph_elems_load(struct soc_tplg *tplg,
 		return -EINVAL;
 	}
 
-	dev_dbg(tplg->dev, "ASoC: adding %d DAPM routes\n", count);
+	dev_dbg(tplg->dev, "ASoC: adding %d DAPM routes for index %d\n", count,
+		hdr->index);
 
 	for (i = 0; i < count; i++) {
 		elem = (struct snd_soc_tplg_dapm_graph_elem *)tplg->pos;
@@ -1473,6 +1485,7 @@ static int soc_tplg_dapm_widget_create(struct soc_tplg *tplg,
 	if (template.id < 0)
 		return template.id;
 
+	/* strings are allocated here, but used and freed by the widget */
 	template.name = kstrdup(w->name, GFP_KERNEL);
 	if (!template.name)
 		return -ENOMEM;
@@ -1585,11 +1598,17 @@ static int soc_tplg_dapm_widget_create(struct soc_tplg *tplg,
 	widget->dobj.widget.kcontrol_type = kcontrol_type;
 	widget->dobj.ops = tplg->ops;
 	widget->dobj.index = tplg->index;
-	kfree(template.sname);
-	kfree(template.name);
 	list_add(&widget->dobj.list, &tplg->comp->dobj_list);
+
+	ret = soc_tplg_widget_ready(tplg, widget, w);
+	if (ret < 0)
+		goto ready_err;
+
 	return 0;
 
+ready_err:
+	snd_soc_tplg_widget_remove(widget);
+	snd_soc_dapm_free_widget(widget);
 hdr_err:
 	kfree(template.sname);
 err:
@@ -1636,7 +1655,7 @@ static int soc_tplg_dapm_complete(struct soc_tplg *tplg)
 	*/
 	if (!card || !card->instantiated) {
 		dev_warn(tplg->dev, "ASoC: Parent card not yet available,"
-				"Do not add new widgets now\n");
+			" widget card binding deferred\n");
 		return 0;
 	}
 
@@ -2371,7 +2390,7 @@ static int soc_tplg_load_header(struct soc_tplg *tplg,
 
 	/* check for matching ID */
 	if (hdr->index != tplg->req_index &&
-		hdr->index != SND_SOC_TPLG_INDEX_ALL)
+		tplg->req_index != SND_SOC_TPLG_INDEX_ALL)
 		return 0;
 
 	tplg->index = hdr->index;

sound/soc/stm/Kconfig

-menuconfig SND_SOC_STM32
-	tristate "STMicroelectronics STM32 SOC audio support"
+menu "STMicroelectronics STM32 SOC audio support"
+
+config SND_SOC_STM32_SAI
+	tristate "STM32 SAI interface (Serial Audio Interface) support"
 	depends on ARCH_STM32 || COMPILE_TEST
 	depends on SND_SOC
 	select SND_SOC_GENERIC_DMAENGINE_PCM
 	select REGMAP_MMIO
 	help
-	  Say Y if you want to enable ASoC-support for STM32
+	  Say Y if you want to enable SAI for STM32
+
+config SND_SOC_STM32_I2S
+	tristate "STM32 I2S interface (SPI/I2S block) support"
+	depends on ARCH_STM32 || COMPILE_TEST
+	depends on SND_SOC
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	select REGMAP_MMIO
+	help
+	  Say Y if you want to enable I2S for STM32
+
+config SND_SOC_STM32_SPDIFRX
+	tristate "STM32 S/PDIF receiver (SPDIFRX) support"
+	depends on ARCH_STM32 || COMPILE_TEST
+	depends on SND_SOC
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	select REGMAP_MMIO
+	select SND_SOC_SPDIF
+	help
+	  Say Y if you want to enable S/PDIF capture for STM32
+
+endmenu

sound/soc/stm/Makefile

 # SAI
 snd-soc-stm32-sai-sub-objs := stm32_sai_sub.o
-obj-$(CONFIG_SND_SOC_STM32) += snd-soc-stm32-sai-sub.o
+obj-$(CONFIG_SND_SOC_STM32_SAI) += snd-soc-stm32-sai-sub.o
 
 snd-soc-stm32-sai-objs := stm32_sai.o
-obj-$(CONFIG_SND_SOC_STM32) += snd-soc-stm32-sai.o
+obj-$(CONFIG_SND_SOC_STM32_SAI) += snd-soc-stm32-sai.o
+
+# I2S
+snd-soc-stm32-i2s-objs := stm32_i2s.o
+obj-$(CONFIG_SND_SOC_STM32_I2S) += snd-soc-stm32-i2s.o
+
+# SPDIFRX
+snd-soc-stm32-spdifrx-objs := stm32_spdifrx.o
+obj-$(CONFIG_SND_SOC_STM32_SPDIFRX) += snd-soc-stm32-spdifrx.o

sound/soc/stm/stm32_sai.c

@@ -27,8 +27,17 @@
 
 #include "stm32_sai.h"
 
+static const struct stm32_sai_conf stm32_sai_conf_f4 = {
+	.version = SAI_STM32F4,
+};
+
+static const struct stm32_sai_conf stm32_sai_conf_h7 = {
+	.version = SAI_STM32H7,
+};
+
 static const struct of_device_id stm32_sai_ids[] = {
-	{ .compatible = "st,stm32f4-sai", .data = (void *)SAI_STM32F4 },
+	{ .compatible = "st,stm32f4-sai", .data = (void *)&stm32_sai_conf_f4 },
+	{ .compatible = "st,stm32h7-sai", .data = (void *)&stm32_sai_conf_h7 },
 	{}
 };
 
@@ -52,7 +61,7 @@ static int stm32_sai_probe(struct platform_device *pdev)
 
 	of_id = of_match_device(stm32_sai_ids, &pdev->dev);
 	if (of_id)
-		sai->version = (enum stm32_sai_version)of_id->data;
+		sai->conf = (struct stm32_sai_conf *)of_id->data;
 	else
 		return -EINVAL;
 
@@ -110,6 +119,6 @@ static struct platform_driver stm32_sai_driver = {
 module_platform_driver(stm32_sai_driver);
 
 MODULE_DESCRIPTION("STM32 Soc SAI Interface");
-MODULE_AUTHOR("Olivier Moysan, <olivier.moysan@st.com>");
+MODULE_AUTHOR("Olivier Moysan <olivier.moysan@st.com>");
 MODULE_ALIAS("platform:st,stm32-sai");
 MODULE_LICENSE("GPL v2");

sound/soc/stm/stm32_sai.h

@@ -31,6 +31,10 @@
 #define STM_SAI_CLRFR_REGX	0x18
 #define STM_SAI_DR_REGX		0x1C
 
+/* Sub-block A registers, relative to sub-block A address */
+#define STM_SAI_PDMCR_REGX	0x40
+#define STM_SAI_PDMLY_REGX	0x44
+
 /******************** Bit definition for SAI_GCR register *******************/
 #define SAI_GCR_SYNCIN_SHIFT	0
 #define SAI_GCR_SYNCIN_MASK	GENMASK(1, SAI_GCR_SYNCIN_SHIFT)
@@ -75,10 +79,11 @@
 #define SAI_XCR1_NODIV		BIT(SAI_XCR1_NODIV_SHIFT)
 
 #define SAI_XCR1_MCKDIV_SHIFT	20
-#define SAI_XCR1_MCKDIV_WIDTH	4
-#define SAI_XCR1_MCKDIV_MASK	GENMASK(24, SAI_XCR1_MCKDIV_SHIFT)
+#define SAI_XCR1_MCKDIV_WIDTH(x)	(((x) == SAI_STM32F4) ? 4 : 6)
+#define SAI_XCR1_MCKDIV_MASK(x) GENMASK((SAI_XCR1_MCKDIV_SHIFT + (x) - 1),\
+				SAI_XCR1_MCKDIV_SHIFT)
 #define SAI_XCR1_MCKDIV_SET(x)	((x) << SAI_XCR1_MCKDIV_SHIFT)
-#define SAI_XCR1_MCKDIV_MAX	((1 << SAI_XCR1_MCKDIV_WIDTH) - 1)
+#define SAI_XCR1_MCKDIV_MAX(x)	((1 << SAI_XCR1_MCKDIV_WIDTH(x)) - 1)
 
 #define SAI_XCR1_OSR_SHIFT	26
 #define SAI_XCR1_OSR		BIT(SAI_XCR1_OSR_SHIFT)
@@ -125,7 +130,6 @@
 #define SAI_XFRCR_FSOFF		BIT(SAI_XFRCR_FSOFF_SHIFT)
 
 /****************** Bit definition for SAI_XSLOTR register ******************/
-
 #define SAI_XSLOTR_FBOFF_SHIFT	0
 #define SAI_XSLOTR_FBOFF_MASK	GENMASK(4, SAI_XSLOTR_FBOFF_SHIFT)
 #define SAI_XSLOTR_FBOFF_SET(x)	((x) << SAI_XSLOTR_FBOFF_SHIFT)
@@ -179,8 +183,65 @@
 #define SAI_XCLRFR_SHIFT	0
 #define SAI_XCLRFR_MASK		GENMASK(6, SAI_XCLRFR_SHIFT)
 
+/****************** Bit definition for SAI_PDMCR register ******************/
+#define SAI_PDMCR_PDMEN		BIT(0)
+
+#define SAI_PDMCR_MICNBR_SHIFT	4
+#define SAI_PDMCR_MICNBR_MASK	GENMASK(5, SAI_PDMCR_MICNBR_SHIFT)
+#define SAI_PDMCR_MICNBR_SET(x)	((x) << SAI_PDMCR_MICNBR_SHIFT)
+
+#define SAI_PDMCR_CKEN1		BIT(8)
+#define SAI_PDMCR_CKEN2		BIT(9)
+#define SAI_PDMCR_CKEN3		BIT(10)
+#define SAI_PDMCR_CKEN4		BIT(11)
+
+/****************** Bit definition for (SAI_PDMDLY register ****************/
+#define SAI_PDMDLY_1L_SHIFT	0
+#define SAI_PDMDLY_1L_MASK	GENMASK(2, SAI_PDMDLY_1L_SHIFT)
+#define SAI_PDMDLY_1L_WIDTH	3
+
+#define SAI_PDMDLY_1R_SHIFT	4
+#define SAI_PDMDLY_1R_MASK	GENMASK(6, SAI_PDMDLY_1R_SHIFT)
+#define SAI_PDMDLY_1R_WIDTH	3
+
+#define SAI_PDMDLY_2L_SHIFT	8
+#define SAI_PDMDLY_2L_MASK	GENMASK(10, SAI_PDMDLY_2L_SHIFT)
+#define SAI_PDMDLY_2L_WIDTH	3
+
+#define SAI_PDMDLY_2R_SHIFT	12
+#define SAI_PDMDLY_2R_MASK	GENMASK(14, SAI_PDMDLY_2R_SHIFT)
+#define SAI_PDMDLY_2R_WIDTH	3
+
+#define SAI_PDMDLY_3L_SHIFT	16
+#define SAI_PDMDLY_3L_MASK	GENMASK(18, SAI_PDMDLY_3L_SHIFT)
+#define SAI_PDMDLY_3L_WIDTH	3
+
+#define SAI_PDMDLY_3R_SHIFT	20
+#define SAI_PDMDLY_3R_MASK	GENMASK(22, SAI_PDMDLY_3R_SHIFT)
+#define SAI_PDMDLY_3R_WIDTH	3
+
+#define SAI_PDMDLY_4L_SHIFT	24
+#define SAI_PDMDLY_4L_MASK	GENMASK(26, SAI_PDMDLY_4L_SHIFT)
+#define SAI_PDMDLY_4L_WIDTH	3
+
+#define SAI_PDMDLY_4R_SHIFT	28
+#define SAI_PDMDLY_4R_MASK	GENMASK(30, SAI_PDMDLY_4R_SHIFT)
+#define SAI_PDMDLY_4R_WIDTH	3
+
+#define STM_SAI_IS_F4(ip)	((ip)->conf->version == SAI_STM32F4)
+#define STM_SAI_IS_H7(ip)	((ip)->conf->version == SAI_STM32H7)
+
 enum stm32_sai_version {
-	SAI_STM32F4
+	SAI_STM32F4,
+	SAI_STM32H7
+};
+
+/**
+ * struct stm32_sai_conf - SAI configuration
+ * @version: SAI version
+ */
+struct stm32_sai_conf {
+	int version;
 };
 
 /**
@@ -195,6 +256,6 @@ struct stm32_sai_data {
 	struct platform_device *pdev;
 	struct clk *clk_x8k;
 	struct clk *clk_x11k;
-	int version;
+	struct stm32_sai_conf *conf;
 	int irq;
 };

sound/soc/sunxi/sun4i-codec.c

@@ -1339,6 +1339,44 @@ static struct snd_soc_card *sun8i_h3_codec_create_card(struct device *dev)
 	return card;
 };
 
+static struct snd_soc_card *sun8i_v3s_codec_create_card(struct device *dev)
+{
+	struct snd_soc_card *card;
+	int ret;
+
+	card = devm_kzalloc(dev, sizeof(*card), GFP_KERNEL);
+	if (!card)
+		return ERR_PTR(-ENOMEM);
+
+	aux_dev.codec_of_node = of_parse_phandle(dev->of_node,
+						 "allwinner,codec-analog-controls",
+						 0);
+	if (!aux_dev.codec_of_node) {
+		dev_err(dev, "Can't find analog controls for codec.\n");
+		return ERR_PTR(-EINVAL);
+	};
+
+	card->dai_link = sun4i_codec_create_link(dev, &card->num_links);
+	if (!card->dai_link)
+		return ERR_PTR(-ENOMEM);
+
+	card->dev		= dev;
+	card->name		= "V3s Audio Codec";
+	card->dapm_widgets	= sun6i_codec_card_dapm_widgets;
+	card->num_dapm_widgets	= ARRAY_SIZE(sun6i_codec_card_dapm_widgets);
+	card->dapm_routes	= sun8i_codec_card_routes;
+	card->num_dapm_routes	= ARRAY_SIZE(sun8i_codec_card_routes);
+	card->aux_dev		= &aux_dev;
+	card->num_aux_devs	= 1;
+	card->fully_routed	= true;
+
+	ret = snd_soc_of_parse_audio_routing(card, "allwinner,audio-routing");
+	if (ret)
+		dev_warn(dev, "failed to parse audio-routing: %d\n", ret);
+
+	return card;
+};
+
 static const struct regmap_config sun4i_codec_regmap_config = {
 	.reg_bits	= 32,
 	.reg_stride	= 4,
@@ -1374,6 +1412,13 @@ static const struct regmap_config sun8i_h3_codec_regmap_config = {
 	.max_register	= SUN8I_H3_CODEC_ADC_DBG,
 };
 
+static const struct regmap_config sun8i_v3s_codec_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.max_register	= SUN8I_H3_CODEC_ADC_DBG,
+};
+
 struct sun4i_codec_quirks {
 	const struct regmap_config *regmap_config;
 	const struct snd_soc_codec_driver *codec;
@@ -1437,6 +1482,20 @@ static const struct sun4i_codec_quirks sun8i_h3_codec_quirks = {
 	.has_reset	= true,
 };
 
+static const struct sun4i_codec_quirks sun8i_v3s_codec_quirks = {
+	.regmap_config	= &sun8i_v3s_codec_regmap_config,
+	/*
+	 * TODO The codec structure should be split out, like
+	 * H3, when adding digital audio processing support.
+	 */
+	.codec		= &sun8i_a23_codec_codec,
+	.create_card	= sun8i_v3s_codec_create_card,
+	.reg_adc_fifoc	= REG_FIELD(SUN6I_CODEC_ADC_FIFOC, 0, 31),
+	.reg_dac_txdata	= SUN8I_H3_CODEC_DAC_TXDATA,
+	.reg_adc_rxdata	= SUN6I_CODEC_ADC_RXDATA,
+	.has_reset	= true,
+};
+
 static const struct of_device_id sun4i_codec_of_match[] = {
 	{
 		.compatible = "allwinner,sun4i-a10-codec",
@@ -1458,6 +1517,10 @@ static const struct of_device_id sun4i_codec_of_match[] = {
 		.compatible = "allwinner,sun8i-h3-codec",
 		.data = &sun8i_h3_codec_quirks,
 	},
+	{
+		.compatible = "allwinner,sun8i-v3s-codec",
+		.data = &sun8i_v3s_codec_quirks,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, sun4i_codec_of_match);

sound/soc/sunxi/sun8i-codec-analog.c

@@ -219,6 +219,22 @@ static const struct snd_kcontrol_new sun8i_codec_mixer_controls[] = {
 			  SUN8I_ADDA_LOMIXSC_MIC2, 1, 0),
 };
 
+/* mixer controls */
+static const struct snd_kcontrol_new sun8i_v3s_codec_mixer_controls[] = {
+	SOC_DAPM_DOUBLE_R("DAC Playback Switch",
+			  SUN8I_ADDA_LOMIXSC,
+			  SUN8I_ADDA_ROMIXSC,
+			  SUN8I_ADDA_LOMIXSC_DACL, 1, 0),
+	SOC_DAPM_DOUBLE_R("DAC Reversed Playback Switch",
+			  SUN8I_ADDA_LOMIXSC,
+			  SUN8I_ADDA_ROMIXSC,
+			  SUN8I_ADDA_LOMIXSC_DACR, 1, 0),
+	SOC_DAPM_DOUBLE_R("Mic1 Playback Switch",
+			  SUN8I_ADDA_LOMIXSC,
+			  SUN8I_ADDA_ROMIXSC,
+			  SUN8I_ADDA_LOMIXSC_MIC1, 1, 0),
+};
+
 /* ADC mixer controls */
 static const struct snd_kcontrol_new sun8i_codec_adc_mixer_controls[] = {
 	SOC_DAPM_DOUBLE_R("Mixer Capture Switch",
@@ -243,6 +259,22 @@ static const struct snd_kcontrol_new sun8i_codec_adc_mixer_controls[] = {
 			  SUN8I_ADDA_LADCMIXSC_MIC2, 1, 0),
 };
 
+/* ADC mixer controls */
+static const struct snd_kcontrol_new sun8i_v3s_codec_adc_mixer_controls[] = {
+	SOC_DAPM_DOUBLE_R("Mixer Capture Switch",
+			  SUN8I_ADDA_LADCMIXSC,
+			  SUN8I_ADDA_RADCMIXSC,
+			  SUN8I_ADDA_LADCMIXSC_OMIXRL, 1, 0),
+	SOC_DAPM_DOUBLE_R("Mixer Reversed Capture Switch",
+			  SUN8I_ADDA_LADCMIXSC,
+			  SUN8I_ADDA_RADCMIXSC,
+			  SUN8I_ADDA_LADCMIXSC_OMIXRR, 1, 0),
+	SOC_DAPM_DOUBLE_R("Mic1 Capture Switch",
+			  SUN8I_ADDA_LADCMIXSC,
+			  SUN8I_ADDA_RADCMIXSC,
+			  SUN8I_ADDA_LADCMIXSC_MIC1, 1, 0),
+};
+
 /* volume / mute controls */
 static const DECLARE_TLV_DB_SCALE(sun8i_codec_out_mixer_pregain_scale,
 				  -450, 150, 0);
@@ -289,16 +321,12 @@ static const struct snd_soc_dapm_widget sun8i_codec_common_widgets[] = {
 	/* Microphone input */
 	SND_SOC_DAPM_INPUT("MIC1"),
 
-	/* Microphone Bias */
-	SND_SOC_DAPM_SUPPLY("MBIAS", SUN8I_ADDA_MIC1G_MICBIAS_CTRL,
-			    SUN8I_ADDA_MIC1G_MICBIAS_CTRL_MMICBIASEN,
-			    0, NULL, 0),
-
 	/* Mic input path */
 	SND_SOC_DAPM_PGA("Mic1 Amplifier", SUN8I_ADDA_MIC1G_MICBIAS_CTRL,
 			 SUN8I_ADDA_MIC1G_MICBIAS_CTRL_MIC1AMPEN, 0, NULL, 0),
+};
 
-	/* Mixers */
+static const struct snd_soc_dapm_widget sun8i_codec_mixer_widgets[] = {
 	SND_SOC_DAPM_MIXER("Left Mixer", SUN8I_ADDA_DAC_PA_SRC,
 			   SUN8I_ADDA_DAC_PA_SRC_LMIXEN, 0,
 			   sun8i_codec_mixer_controls,
@@ -317,10 +345,31 @@ static const struct snd_soc_dapm_widget sun8i_codec_common_widgets[] = {
 			   ARRAY_SIZE(sun8i_codec_adc_mixer_controls)),
 };
 
+static const struct snd_soc_dapm_widget sun8i_v3s_codec_mixer_widgets[] = {
+	SND_SOC_DAPM_MIXER("Left Mixer", SUN8I_ADDA_DAC_PA_SRC,
+			   SUN8I_ADDA_DAC_PA_SRC_LMIXEN, 0,
+			   sun8i_v3s_codec_mixer_controls,
+			   ARRAY_SIZE(sun8i_v3s_codec_mixer_controls)),
+	SND_SOC_DAPM_MIXER("Right Mixer", SUN8I_ADDA_DAC_PA_SRC,
+			   SUN8I_ADDA_DAC_PA_SRC_RMIXEN, 0,
+			   sun8i_v3s_codec_mixer_controls,
+			   ARRAY_SIZE(sun8i_v3s_codec_mixer_controls)),
+	SND_SOC_DAPM_MIXER("Left ADC Mixer", SUN8I_ADDA_ADC_AP_EN,
+			   SUN8I_ADDA_ADC_AP_EN_ADCLEN, 0,
+			   sun8i_v3s_codec_adc_mixer_controls,
+			   ARRAY_SIZE(sun8i_v3s_codec_adc_mixer_controls)),
+	SND_SOC_DAPM_MIXER("Right ADC Mixer", SUN8I_ADDA_ADC_AP_EN,
+			   SUN8I_ADDA_ADC_AP_EN_ADCREN, 0,
+			   sun8i_v3s_codec_adc_mixer_controls,
+			   ARRAY_SIZE(sun8i_v3s_codec_adc_mixer_controls)),
+};
+
 static const struct snd_soc_dapm_route sun8i_codec_common_routes[] = {
 	/* Microphone Routes */
 	{ "Mic1 Amplifier", NULL, "MIC1"},
+};
 
+static const struct snd_soc_dapm_route sun8i_codec_mixer_routes[] = {
 	/* Left Mixer Routes */
 	{ "Left Mixer", "DAC Playback Switch", "Left DAC" },
 	{ "Left Mixer", "DAC Reversed Playback Switch", "Right DAC" },
@@ -453,6 +502,27 @@ static int sun8i_codec_add_headphone(struct snd_soc_component *cmpnt)
 	return 0;
 }
 
+/* mbias specific widget */
+static const struct snd_soc_dapm_widget sun8i_codec_mbias_widgets[] = {
+	SND_SOC_DAPM_SUPPLY("MBIAS", SUN8I_ADDA_MIC1G_MICBIAS_CTRL,
+			    SUN8I_ADDA_MIC1G_MICBIAS_CTRL_MMICBIASEN,
+			    0, NULL, 0),
+};
+
+static int sun8i_codec_add_mbias(struct snd_soc_component *cmpnt)
+{
+	struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(cmpnt);
+	struct device *dev = cmpnt->dev;
+	int ret;
+
+	ret = snd_soc_dapm_new_controls(dapm, sun8i_codec_mbias_widgets,
+					ARRAY_SIZE(sun8i_codec_mbias_widgets));
+	if (ret)
+		dev_err(dev, "Failed to add MBIAS DAPM widgets: %d\n", ret);
+
+	return ret;
+}
+
 /* hmic specific widget */
 static const struct snd_soc_dapm_widget sun8i_codec_hmic_widgets[] = {
 	SND_SOC_DAPM_SUPPLY("HBIAS", SUN8I_ADDA_MIC1G_MICBIAS_CTRL,
@@ -679,6 +749,7 @@ struct sun8i_codec_analog_quirks {
 	bool has_hmic;
 	bool has_linein;
 	bool has_lineout;
+	bool has_mbias;
 	bool has_mic2;
 };
 
@@ -686,15 +757,64 @@ static const struct sun8i_codec_analog_quirks sun8i_a23_quirks = {
 	.has_headphone	= true,
 	.has_hmic	= true,
 	.has_linein	= true,
+	.has_mbias	= true,
 	.has_mic2	= true,
 };
 
 static const struct sun8i_codec_analog_quirks sun8i_h3_quirks = {
 	.has_linein	= true,
 	.has_lineout	= true,
+	.has_mbias	= true,
 	.has_mic2	= true,
 };
 
+static int sun8i_codec_analog_add_mixer(struct snd_soc_component *cmpnt,
+					const struct sun8i_codec_analog_quirks *quirks)
+{
+	struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(cmpnt);
+	struct device *dev = cmpnt->dev;
+	int ret;
+
+	if (!quirks->has_mic2 && !quirks->has_linein) {
+		/*
+		 * Apply the special widget set which has uses a control
+		 * without MIC2 and Line In, for SoCs without these.
+		 * TODO: not all special cases are supported now, this case
+		 * is present because it's the case of V3s.
+		 */
+		ret = snd_soc_dapm_new_controls(dapm,
+						sun8i_v3s_codec_mixer_widgets,
+						ARRAY_SIZE(sun8i_v3s_codec_mixer_widgets));
+		if (ret) {
+			dev_err(dev, "Failed to add V3s Mixer DAPM widgets: %d\n", ret);
+			return ret;
+		}
+	} else {
+		/* Apply the generic mixer widget set. */
+		ret = snd_soc_dapm_new_controls(dapm,
+						sun8i_codec_mixer_widgets,
+						ARRAY_SIZE(sun8i_codec_mixer_widgets));
+		if (ret) {
+			dev_err(dev, "Failed to add Mixer DAPM widgets: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = snd_soc_dapm_add_routes(dapm, sun8i_codec_mixer_routes,
+				      ARRAY_SIZE(sun8i_codec_mixer_routes));
+	if (ret) {
+		dev_err(dev, "Failed to add Mixer DAPM routes: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct sun8i_codec_analog_quirks sun8i_v3s_quirks = {
+	.has_headphone	= true,
+	.has_hmic	= true,
+};
+
 static int sun8i_codec_analog_cmpnt_probe(struct snd_soc_component *cmpnt)
 {
 	struct device *dev = cmpnt->dev;
@@ -709,6 +829,9 @@ static int sun8i_codec_analog_cmpnt_probe(struct snd_soc_component *cmpnt)
 	quirks = of_device_get_match_data(dev);
 
 	/* Add controls, widgets, and routes for individual features */
+	ret = sun8i_codec_analog_add_mixer(cmpnt, quirks);
+	if (ret)
+		return ret;
 
 	if (quirks->has_headphone) {
 		ret = sun8i_codec_add_headphone(cmpnt);
@@ -734,6 +857,12 @@ static int sun8i_codec_analog_cmpnt_probe(struct snd_soc_component *cmpnt)
 			return ret;
 	}
 
+	if (quirks->has_mbias) {
+		ret = sun8i_codec_add_mbias(cmpnt);
+		if (ret)
+			return ret;
+	}
+
 	if (quirks->has_mic2) {
 		ret = sun8i_codec_add_mic2(cmpnt);
 		if (ret)
@@ -762,6 +891,10 @@ static const struct of_device_id sun8i_codec_analog_of_match[] = {
 		.compatible = "allwinner,sun8i-h3-codec-analog",
 		.data = &sun8i_h3_quirks,
 	},
+	{
+		.compatible = "allwinner,sun8i-v3s-codec-analog",
+		.data = &sun8i_v3s_quirks,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, sun8i_codec_analog_of_match);