Skip to content

L
linux
Commit f1dd6ad5 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus 

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (141 commits)
  MIPS: Alchemy: defconfig updates
  MIPS: Alchemy: Fix Au1100 ethernet build failure
  MIPS: Alchemy: Repair db1500/bosporus builds
  MIPS: ARC: Cleanup unused definitions from sgialib.h
  MIPS: Cobalt: convert legacy port addresses to GT-64111 bus addresses
  MIPS: Alchemy: use 36bit addresses for PCMCIA resources.
  MIPS: Cobalt: Fix theoretical port aliasing issue
  MIPS: Use ALIGN(x, bytes) instead of __ALIGN_MASK(x, bytes - 1)
  MIPS: Crazy spinlock speed test.
  MIPS: Optimize spinlocks.
  MIPS: Alchemy: devboard PM needs to save CPLD registers.
  MIPS: PowerTV: Eliminate duplicate opcode definition macros
  MIPS: Lemote 2F: Move printks out of port_access_lock.
  MIPS: PNX833x: Convert IRQ controller locks to raw spinlocks.
  MIPS: Octeon: Replace spinlock with raw_spinlocks in dma-octeon.c.
  MIPS: Octeon: Replace rwlocks in irq_chip handlers with raw_spinlocks.
  MIPS: Octeon: Convert octeon_irq_msi_lock to raw spinlock.
  MIPS: Loongson: Remove pointless sample_lock from oprofile code.
  MIPS: SNI: Convert sni_rm200_i8259A_lock to raw spinlock.
  MIPS: i8259: Convert IRQ controller lock to raw spinlock.
  ...
parents 8d37a371 e10b234b
Expand all Show whitespace changes
Inline Side-by-side
Showing with 15899 additions and 11205 deletions
arch/mips/Kconfig
View file @ f1dd6ad5
......@@ -41,7 +41,7 @@ config AR7
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_ZBOOT_UART16550
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select GCD
select VLYNQ
help
......@@ -180,7 +180,7 @@ config LASAT
config MACH_LOONGSON
bool "Loongson family of machines"
select SYS_SUPPORTS_ZBOOT_UART16550
select SYS_SUPPORTS_ZBOOT
help
This enables the support of Loongson family of machines.
......@@ -1295,7 +1295,6 @@ config CPU_CAVIUM_OCTEON
select SYS_SUPPORTS_SMP
select NR_CPUS_DEFAULT_16
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
help
......@@ -1726,6 +1725,9 @@ config SB1_PASS_2_1_WORKAROUNDS
config 64BIT_PHYS_ADDR
bool
config ARCH_PHYS_ADDR_T_64BIT
def_bool 64BIT_PHYS_ADDR
config CPU_HAS_SMARTMIPS
depends on SYS_SUPPORTS_SMARTMIPS
bool "Support for the SmartMIPS ASE"
......
arch/mips/Kconfig.debug
View file @ f1dd6ad5
......@@ -102,4 +102,30 @@ config RUNTIME_DEBUG
arch/mips/include/asm/debug.h for debugging macros.
If unsure, say N.
config DEBUG_ZBOOT
bool "Enable compressed kernel support debugging"
depends on DEBUG_KERNEL && SYS_SUPPORTS_ZBOOT
default n
help
If you want to add compressed kernel support to a new board, and the
board supports uart16550 compatible serial port, please select
SYS_SUPPORTS_ZBOOT_UART16550 for your board and enable this option to
debug it.
If your board doesn't support uart16550 compatible serial port, you
can try to select SYS_SUPPORTS_ZBOOT and use the other methods to
debug it. for example, add a new serial port support just as
arch/mips/boot/compressed/uart-16550.c does.
After the compressed kernel support works, please disable this option
to reduce the kernel image size and speed up the booting procedure a
little.
config SPINLOCK_TEST
bool "Enable spinlock timing tests in debugfs"
depends on DEBUG_FS
default n
help
Add several files to the debugfs to test spinlock speed.
endmenu
arch/mips/Makefile
View file @ f1dd6ad5
......@@ -184,6 +184,15 @@ libs-$(CONFIG_CFE) += arch/mips/fw/cfe/
libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/
libs-y += arch/mips/fw/lib/
#
# Kernel compression
#
ifdef SYS_SUPPORTS_ZBOOT
COMPRESSION_FNAME = vmlinuz
else
COMPRESSION_FNAME = vmlinux
endif
#
# Board-dependent options and extra files
#
......@@ -332,11 +341,11 @@ load-$(CONFIG_WR_PPMC) += 0xffffffff80100000
#
# Loongson family
#
core-$(CONFIG_MACH_LOONGSON) +=arch/mips/loongson/
core-$(CONFIG_MACH_LOONGSON) += arch/mips/loongson/
cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson \
-mno-branch-likely
load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000
load-$(CONFIG_LEMOTE_MACH2F) +=0xffffffff80200000
load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000
load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000
#
# MIPS Malta board
......@@ -344,7 +353,7 @@ load-$(CONFIG_LEMOTE_MACH2F) +=0xffffffff80200000
core-$(CONFIG_MIPS_MALTA) += arch/mips/mti-malta/
cflags-$(CONFIG_MIPS_MALTA) += -I$(srctree)/arch/mips/include/asm/mach-malta
load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000
all-$(CONFIG_MIPS_MALTA) := vmlinuz.bin
all-$(CONFIG_MIPS_MALTA) := $(COMPRESSION_FNAME).bin
#
# MIPS SIM
......@@ -594,7 +603,7 @@ load-$(CONFIG_SNI_RM) += 0xffffffff80600000
else
load-$(CONFIG_SNI_RM) += 0xffffffff80030000
endif
all-$(CONFIG_SNI_RM) := vmlinuz.ecoff
all-$(CONFIG_SNI_RM) := $(COMPRESSION_FNAME).ecoff
#
# Common TXx9
......
arch/mips/alchemy/Kconfig
View file @ f1dd6ad5
# au1000-style gpio
config ALCHEMY_GPIO_AU1000
# au1000-style gpio and interrupt controllers
config ALCHEMY_GPIOINT_AU1000
bool
# select this in your board config if you don't want to use the gpio
......@@ -20,12 +20,14 @@ config MIPS_MTX1
select HW_HAS_PCI
select SOC_AU1500
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_BOSPORUS
bool "Alchemy Bosporus board"
select SOC_AU1500
select DMA_NONCOHERENT
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_DB1000
bool "Alchemy DB1000 board"
......@@ -33,12 +35,14 @@ config MIPS_DB1000
select DMA_NONCOHERENT
select HW_HAS_PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_DB1100
bool "Alchemy DB1100 board"
select SOC_AU1100
select DMA_NONCOHERENT
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_DB1200
bool "Alchemy DB1200 board"
......@@ -46,6 +50,7 @@ config MIPS_DB1200
select DMA_COHERENT
select MIPS_DISABLE_OBSOLETE_IDE
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_DB1500
bool "Alchemy DB1500 board"
......@@ -55,6 +60,7 @@ config MIPS_DB1500
select MIPS_DISABLE_OBSOLETE_IDE
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_DB1550
bool "Alchemy DB1550 board"
......@@ -63,12 +69,14 @@ config MIPS_DB1550
select DMA_NONCOHERENT
select MIPS_DISABLE_OBSOLETE_IDE
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_MIRAGE
bool "Alchemy Mirage board"
select DMA_NONCOHERENT
select SOC_AU1500
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_PB1000
bool "Alchemy PB1000 board"
......@@ -77,6 +85,7 @@ config MIPS_PB1000
select HW_HAS_PCI
select SWAP_IO_SPACE
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_PB1100
bool "Alchemy PB1100 board"
......@@ -85,6 +94,7 @@ config MIPS_PB1100
select HW_HAS_PCI
select SWAP_IO_SPACE
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_PB1200
bool "Alchemy PB1200 board"
......@@ -92,6 +102,7 @@ config MIPS_PB1200
select DMA_NONCOHERENT
select MIPS_DISABLE_OBSOLETE_IDE
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_PB1500
bool "Alchemy PB1500 board"
......@@ -99,6 +110,7 @@ config MIPS_PB1500
select DMA_NONCOHERENT
select HW_HAS_PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_PB1550
bool "Alchemy PB1550 board"
......@@ -107,39 +119,41 @@ config MIPS_PB1550
select HW_HAS_PCI
select MIPS_DISABLE_OBSOLETE_IDE
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_XXS1500
bool "MyCable XXS1500 board"
select DMA_NONCOHERENT
select SOC_AU1500
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
endchoice
config SOC_AU1000
bool
select SOC_AU1X00
select ALCHEMY_GPIO_AU1000
select ALCHEMY_GPIOINT_AU1000
config SOC_AU1100
bool
select SOC_AU1X00
select ALCHEMY_GPIO_AU1000
select ALCHEMY_GPIOINT_AU1000
config SOC_AU1500
bool
select SOC_AU1X00
select ALCHEMY_GPIO_AU1000
select ALCHEMY_GPIOINT_AU1000
config SOC_AU1550
bool
select SOC_AU1X00
select ALCHEMY_GPIO_AU1000
select ALCHEMY_GPIOINT_AU1000
config SOC_AU1200
bool
select SOC_AU1X00
select ALCHEMY_GPIO_AU1000
select ALCHEMY_GPIOINT_AU1000
config SOC_AU1X00
bool
......
arch/mips/alchemy/common/Makefile
View file @ f1dd6ad5
......@@ -5,14 +5,15 @@
# Makefile for the Alchemy Au1xx0 CPUs, generic files.
#
obj-y += prom.o irq.o puts.o time.o reset.o \
clocks.o platform.o power.o setup.o \
obj-y += prom.o time.o clocks.o platform.o power.o setup.o \
sleeper.o dma.o dbdma.o
obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o
# optional gpiolib support
ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)
ifeq ($(CONFIG_GPIOLIB),y)
obj-$(CONFIG_ALCHEMY_GPIO_AU1000) += gpiolib-au1000.o
obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += gpiolib-au1000.o
endif
endif
......
arch/mips/alchemy/common/clocks.c
View file @ f1dd6ad5
......@@ -40,8 +40,6 @@
static unsigned int au1x00_clock; /* Hz */
static unsigned long uart_baud_base;
static DEFINE_SPINLOCK(time_lock);
/*
* Set the au1000_clock
*/
......@@ -84,9 +82,6 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base)
unsigned long au1xxx_calc_clock(void)
{
unsigned long cpu_speed;
unsigned long flags;
spin_lock_irqsave(&time_lock, flags);
/*
* On early Au1000, sys_cpupll was write-only. Since these
......@@ -108,8 +103,6 @@ unsigned long au1xxx_calc_clock(void)
set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
& 0x03) + 2) * 16));
spin_unlock_irqrestore(&time_lock, flags);
set_au1x00_speed(cpu_speed);
return cpu_speed;
......
arch/mips/alchemy/common/dbdma.c
View file @ f1dd6ad5
......@@ -30,6 +30,7 @@
*
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
......@@ -58,7 +59,6 @@ static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
static int dbdma_initialized;
static void au1xxx_dbdma_init(void);
static dbdev_tab_t dbdev_tab[] = {
#ifdef CONFIG_SOC_AU1550
......@@ -237,7 +237,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
void (*callback)(int, void *), void *callparam)
{
unsigned long flags;
u32 used, chan, rv;
u32 used, chan;
u32 dcp;
int i;
dbdev_tab_t *stp, *dtp;
......@@ -250,8 +250,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
* which can't be done successfully during board set up.
*/
if (!dbdma_initialized)
au1xxx_dbdma_init();
dbdma_initialized = 1;
return 0;
stp = find_dbdev_id(srcid);
if (stp == NULL)
......@@ -261,7 +260,6 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
return 0;
used = 0;
rv = 0;
/* Check to see if we can get both channels. */
spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
......@@ -282,7 +280,9 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
used++;
spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
if (!used) {
if (used)
return 0;
/* Let's see if we can allocate a channel for it. */
ctp = NULL;
chan = 0;
......@@ -327,18 +327,18 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
cp->ddma_cfg = i;
au_sync();
/* Return a non-zero value that can be used to
* find the channel information in subsequent
* operations.
/*
* Return a non-zero value that can be used to find the channel
* information in subsequent operations.
*/
rv = (u32)(&chan_tab_ptr[chan]);
} else {
return (u32)(&chan_tab_ptr[chan]);
}
/* Release devices */
stp->dev_flags &= ~DEV_FLAGS_INUSE;
dtp->dev_flags &= ~DEV_FLAGS_INUSE;
}
}
return rv;
return 0;
}
EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
......@@ -572,7 +572,7 @@ EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
* This updates the source pointer and byte count. Normally used
* for memory to fifo transfers.
*/
u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
......@@ -598,7 +598,7 @@ u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
return 0;
/* Load up buffer address and byte count. */
dp->dscr_source0 = virt_to_phys(buf);
dp->dscr_source0 = buf & ~0UL;
dp->dscr_cmd1 = nbytes;
/* Check flags */
if (flags & DDMA_FLAGS_IE)
......@@ -625,14 +625,13 @@ u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
/* Return something non-zero. */
return nbytes;
}
EXPORT_SYMBOL(_au1xxx_dbdma_put_source);
EXPORT_SYMBOL(au1xxx_dbdma_put_source);
/* Put a destination buffer into the DMA ring.
* This updates the destination pointer and byte count. Normally used
* to place an empty buffer into the ring for fifo to memory transfers.
*/
u32
_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
......@@ -662,7 +661,7 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
if (flags & DDMA_FLAGS_NOIE)
dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
dp->dscr_dest0 = virt_to_phys(buf);
dp->dscr_dest0 = buf & ~0UL;
dp->dscr_cmd1 = nbytes;
#if 0
printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
......@@ -688,7 +687,7 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
/* Return something non-zero. */
return nbytes;
}
EXPORT_SYMBOL(_au1xxx_dbdma_put_dest);
EXPORT_SYMBOL(au1xxx_dbdma_put_dest);
/*
* Get a destination buffer into the DMA ring.
......@@ -871,28 +870,6 @@ static irqreturn_t dbdma_interrupt(int irq, void *dev_id)
return IRQ_RETVAL(1);
}
static void au1xxx_dbdma_init(void)
{
int irq_nr;
dbdma_gptr->ddma_config = 0;
dbdma_gptr->ddma_throttle = 0;
dbdma_gptr->ddma_inten = 0xffff;
au_sync();
#if defined(CONFIG_SOC_AU1550)
irq_nr = AU1550_DDMA_INT;
#elif defined(CONFIG_SOC_AU1200)
irq_nr = AU1200_DDMA_INT;
#else
#error Unknown Au1x00 SOC
#endif
if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
"Au1xxx dbdma", (void *)dbdma_gptr))
printk(KERN_ERR "Can't get 1550 dbdma irq");
}
void au1xxx_dbdma_dump(u32 chanid)
{
chan_tab_t *ctp;
......@@ -906,7 +883,7 @@ void au1xxx_dbdma_dump(u32 chanid)
dtp = ctp->chan_dest;
cp = ctp->chan_ptr;
printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d) \n",
printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d)\n",
(u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp,
dtp - dbdev_tab);
printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n",
......@@ -1041,4 +1018,38 @@ void au1xxx_dbdma_resume(void)
}
}
#endif /* CONFIG_PM */
static int __init au1xxx_dbdma_init(void)
{
int irq_nr, ret;
dbdma_gptr->ddma_config = 0;
dbdma_gptr->ddma_throttle = 0;
dbdma_gptr->ddma_inten = 0xffff;
au_sync();
switch (alchemy_get_cputype()) {
case ALCHEMY_CPU_AU1550:
irq_nr = AU1550_DDMA_INT;
break;
case ALCHEMY_CPU_AU1200:
irq_nr = AU1200_DDMA_INT;
break;
default:
return -ENODEV;
}
ret = request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
"Au1xxx dbdma", (void *)dbdma_gptr);
if (ret)
printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
else {
dbdma_initialized = 1;
printk(KERN_INFO "Alchemy DBDMA initialized\n");
}
return ret;
}
subsys_initcall(au1xxx_dbdma_init);
#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
arch/mips/alchemy/common/dma.c
View file @ f1dd6ad5
......@@ -29,6 +29,8 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
......@@ -188,17 +190,14 @@ int request_au1000_dma(int dev_id, const char *dev_str,
dev = &dma_dev_table[dev_id];
if (irqhandler) {
chan->irq = AU1000_DMA_INT_BASE + i;
chan->irq_dev = irq_dev_id;
ret = request_irq(chan->irq, irqhandler, irqflags, dev_str,
chan->irq_dev);
if (ret) {
chan->irq = 0;
chan->irq_dev = NULL;
return ret;
}
} else {
chan->irq = 0;
chan->irq_dev = NULL;
}
......@@ -226,13 +225,40 @@ void free_au1000_dma(unsigned int dmanr)
}
disable_dma(dmanr);
if (chan->irq)
if (chan->irq_dev)
free_irq(chan->irq, chan->irq_dev);
chan->irq = 0;
chan->irq_dev = NULL;
chan->dev_id = -1;
}
EXPORT_SYMBOL(free_au1000_dma);
static int __init au1000_dma_init(void)
{
int base, i;
switch (alchemy_get_cputype()) {
case ALCHEMY_CPU_AU1000:
base = AU1000_DMA_INT_BASE;
break;
case ALCHEMY_CPU_AU1500:
base = AU1500_DMA_INT_BASE;
break;
case ALCHEMY_CPU_AU1100:
base = AU1100_DMA_INT_BASE;
break;
default:
goto out;
}
for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
au1000_dma_table[i].irq = base + i;
printk(KERN_INFO "Alchemy DMA initialized\n");
out:
return 0;
}
arch_initcall(au1000_dma_init);
#endif /* AU1000 AU1500 AU1100 */
arch/mips/alchemy/common/gpiolib-au1000.c
View file @ f1dd6ad5
......@@ -36,7 +36,6 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/gpio.h>
#if !defined(CONFIG_SOC_AU1000)
static int gpio2_get(struct gpio_chip *chip, unsigned offset)
{
return alchemy_gpio2_get_value(offset + ALCHEMY_GPIO2_BASE);
......@@ -63,7 +62,7 @@ static int gpio2_to_irq(struct gpio_chip *chip, unsigned offset)
{
return alchemy_gpio2_to_irq(offset + ALCHEMY_GPIO2_BASE);
}
#endif /* !defined(CONFIG_SOC_AU1000) */
static int gpio1_get(struct gpio_chip *chip, unsigned offset)
{
......@@ -104,7 +103,6 @@ struct gpio_chip alchemy_gpio_chip[] = {
.base = ALCHEMY_GPIO1_BASE,
.ngpio = ALCHEMY_GPIO1_NUM,
},
#if !defined(CONFIG_SOC_AU1000)
[1] = {
.label = "alchemy-gpio2",
.direction_input = gpio2_direction_input,
......@@ -115,15 +113,13 @@ struct gpio_chip alchemy_gpio_chip[] = {
.base = ALCHEMY_GPIO2_BASE,
.ngpio = ALCHEMY_GPIO2_NUM,
},
#endif
};
static int __init alchemy_gpiolib_init(void)
{
gpiochip_add(&alchemy_gpio_chip[0]);
#if !defined(CONFIG_SOC_AU1000)
if (alchemy_get_cputype() != ALCHEMY_CPU_AU1000)
gpiochip_add(&alchemy_gpio_chip[1]);
#endif
return 0;
}
......
arch/mips/alchemy/common/irq.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/alchemy/common/platform.c
View file @ f1dd6ad5
......@@ -19,39 +19,40 @@
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-au1x00/au1100_mmc.h>
#include <asm/mach-au1x00/au1xxx_eth.h>
#define PORT(_base, _irq) \
{ \
.iobase = _base, \
.membase = (void __iomem *)_base,\
.mapbase = CPHYSADDR(_base), \
.mapbase = _base, \
.irq = _irq, \
.regshift = 2, \
.iotype = UPIO_AU, \
.flags = UPF_SKIP_TEST \
.flags = UPF_SKIP_TEST | UPF_IOREMAP | \
UPF_FIXED_TYPE, \
.type = PORT_16550A, \
}
static struct plat_serial8250_port au1x00_uart_data[] = {
#if defined(CONFIG_SERIAL_8250_AU1X00)
#if defined(CONFIG_SOC_AU1000)
PORT(UART0_ADDR, AU1000_UART0_INT),
PORT(UART1_ADDR, AU1000_UART1_INT),
PORT(UART2_ADDR, AU1000_UART2_INT),
PORT(UART3_ADDR, AU1000_UART3_INT),
PORT(UART0_PHYS_ADDR, AU1000_UART0_INT),
PORT(UART1_PHYS_ADDR, AU1000_UART1_INT),
PORT(UART2_PHYS_ADDR, AU1000_UART2_INT),
PORT(UART3_PHYS_ADDR, AU1000_UART3_INT),
#elif defined(CONFIG_SOC_AU1500)
PORT(UART0_ADDR, AU1500_UART0_INT),
PORT(UART3_ADDR, AU1500_UART3_INT),
PORT(UART0_PHYS_ADDR, AU1500_UART0_INT),
PORT(UART3_PHYS_ADDR, AU1500_UART3_INT),
#elif defined(CONFIG_SOC_AU1100)
PORT(UART0_ADDR, AU1100_UART0_INT),
PORT(UART1_ADDR, AU1100_UART1_INT),
PORT(UART3_ADDR, AU1100_UART3_INT),
PORT(UART0_PHYS_ADDR, AU1100_UART0_INT),
PORT(UART1_PHYS_ADDR, AU1100_UART1_INT),
PORT(UART3_PHYS_ADDR, AU1100_UART3_INT),
#elif defined(CONFIG_SOC_AU1550)
PORT(UART0_ADDR, AU1550_UART0_INT),
PORT(UART1_ADDR, AU1550_UART1_INT),
PORT(UART3_ADDR, AU1550_UART3_INT),
PORT(UART0_PHYS_ADDR, AU1550_UART0_INT),
PORT(UART1_PHYS_ADDR, AU1550_UART1_INT),
PORT(UART3_PHYS_ADDR, AU1550_UART3_INT),
#elif defined(CONFIG_SOC_AU1200)
PORT(UART0_ADDR, AU1200_UART0_INT),
PORT(UART1_ADDR, AU1200_UART1_INT),
PORT(UART0_PHYS_ADDR, AU1200_UART0_INT),
PORT(UART1_PHYS_ADDR, AU1200_UART1_INT),
#endif
#endif /* CONFIG_SERIAL_8250_AU1X00 */
{ },
......@@ -73,8 +74,8 @@ static struct resource au1xxx_usb_ohci_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AU1000_USB_HOST_INT,
.end = AU1000_USB_HOST_INT,
.start = FOR_PLATFORM_C_USB_HOST_INT,
.end = FOR_PLATFORM_C_USB_HOST_INT,
.flags = IORESOURCE_IRQ,
},
};
......@@ -132,8 +133,8 @@ static struct resource au1xxx_usb_ehci_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AU1000_USB_HOST_INT,
.end = AU1000_USB_HOST_INT,
.start = AU1200_USB_INT,
.end = AU1200_USB_INT,
.flags = IORESOURCE_IRQ,
},
};
......@@ -308,11 +309,6 @@ static struct platform_device au1200_mmc1_device = {
#endif /* #ifndef CONFIG_MIPS_DB1200 */
#endif /* #ifdef CONFIG_SOC_AU1200 */
static struct platform_device au1x00_pcmcia_device = {
.name = "au1x00-pcmcia",
.id = 0,
};
/* All Alchemy demoboards with I2C have this #define in their headers */
#ifdef SMBUS_PSC_BASE
static struct resource pbdb_smbus_resources[] = {
......@@ -331,10 +327,92 @@ static struct platform_device pbdb_smbus_device = {
};
#endif
/* Macro to help defining the Ethernet MAC resources */
#define MAC_RES(_base, _enable, _irq) \
{ \
.start = CPHYSADDR(_base), \
.end = CPHYSADDR(_base + 0xffff), \
.flags = IORESOURCE_MEM, \
}, \
{ \
.start = CPHYSADDR(_enable), \
.end = CPHYSADDR(_enable + 0x3), \
.flags = IORESOURCE_MEM, \
}, \
{ \
.start = _irq, \
.end = _irq, \
.flags = IORESOURCE_IRQ \
}
static struct resource au1xxx_eth0_resources[] = {
#if defined(CONFIG_SOC_AU1000)
MAC_RES(AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT),
#elif defined(CONFIG_SOC_AU1100)
MAC_RES(AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT),
#elif defined(CONFIG_SOC_AU1550)
MAC_RES(AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT),
#elif defined(CONFIG_SOC_AU1500)
MAC_RES(AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT),
#endif
};
static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
.phy1_search_mac0 = 1,
};
static struct platform_device au1xxx_eth0_device = {
.name = "au1000-eth",
.id = 0,
.num_resources = ARRAY_SIZE(au1xxx_eth0_resources),
.resource = au1xxx_eth0_resources,
.dev.platform_data = &au1xxx_eth0_platform_data,
};
#ifndef CONFIG_SOC_AU1100
static struct resource au1xxx_eth1_resources[] = {
#if defined(CONFIG_SOC_AU1000)
MAC_RES(AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT),
#elif defined(CONFIG_SOC_AU1550)
MAC_RES(AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT),
#elif defined(CONFIG_SOC_AU1500)
MAC_RES(AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT),
#endif
};
static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
.phy1_search_mac0 = 1,
};
static struct platform_device au1xxx_eth1_device = {
.name = "au1000-eth",
.id = 1,
.num_resources = ARRAY_SIZE(au1xxx_eth1_resources),
.resource = au1xxx_eth1_resources,
.dev.platform_data = &au1xxx_eth1_platform_data,
};
#endif
void __init au1xxx_override_eth_cfg(unsigned int port,
struct au1000_eth_platform_data *eth_data)
{
if (!eth_data || port > 1)
return;
if (port == 0)
memcpy(&au1xxx_eth0_platform_data, eth_data,
sizeof(struct au1000_eth_platform_data));
#ifndef CONFIG_SOC_AU1100
else
memcpy(&au1xxx_eth1_platform_data, eth_data,
sizeof(struct au1000_eth_platform_data));
#endif
}
static struct platform_device *au1xxx_platform_devices[] __initdata = {
&au1xx0_uart_device,
&au1xxx_usb_ohci_device,
&au1x00_pcmcia_device,
#ifdef CONFIG_FB_AU1100
&au1100_lcd_device,
#endif
......@@ -351,6 +429,7 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
#ifdef SMBUS_PSC_BASE
&pbdb_smbus_device,
#endif
&au1xxx_eth0_device,
};
static int __init au1xxx_platform_init(void)
......@@ -362,6 +441,12 @@ static int __init au1xxx_platform_init(void)
for (i = 0; au1x00_uart_data[i].flags; i++)
au1x00_uart_data[i].uartclk = uartclk;
#ifndef CONFIG_SOC_AU1100
/* Register second MAC if enabled in pinfunc */
if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
platform_device_register(&au1xxx_eth1_device);
#endif
return platform_add_devices(au1xxx_platform_devices,
ARRAY_SIZE(au1xxx_platform_devices));
}
......
arch/mips/alchemy/common/prom.c
View file @ f1dd6ad5
......@@ -43,29 +43,15 @@ int prom_argc;
char **prom_argv;
char **prom_envp;
char * __init_or_module prom_getcmdline(void)
{
return &(arcs_cmdline[0]);
}
void prom_init_cmdline(void)
{
char *cp;
int actr;
actr = 1; /* Always ignore argv[0] */
int i;
cp = &(arcs_cmdline[0]);
while (actr < prom_argc) {
strcpy(cp, prom_argv[actr]);
cp += strlen(prom_argv[actr]);
*cp++ = ' ';
actr++;
for (i = 1; i < prom_argc; i++) {
strlcat(arcs_cmdline, prom_argv[i], COMMAND_LINE_SIZE);
if (i < (prom_argc - 1))
strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
}
if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
--cp;
if (prom_argc > 1)
*cp = '\0';
}
char *prom_getenv(char *envname)
......@@ -121,14 +107,12 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str)
int prom_get_ethernet_addr(char *ethernet_addr)
{
char *ethaddr_str;
char *argptr;
/* Check the environment variables first */
ethaddr_str = prom_getenv("ethaddr");
if (!ethaddr_str) {
/* Check command line */
argptr = prom_getcmdline();
ethaddr_str = strstr(argptr, "ethaddr=");
ethaddr_str = strstr(arcs_cmdline, "ethaddr=");
if (!ethaddr_str)
return -1;
......
arch/mips/alchemy/common/puts.c deleted 100644 → 0
View file @ 8d37a371
/*
*
* BRIEF MODULE DESCRIPTION
* Low level UART routines to directly access Alchemy UART.
*
* Copyright 2001, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <asm/mach-au1x00/au1000.h>
#define SERIAL_BASE UART_BASE
#define SER_CMD 0x7
#define SER_DATA 0x1
#define TX_BUSY 0x20
#define TIMEOUT 0xffffff
#define SLOW_DOWN
static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE;
#ifdef SLOW_DOWN
static inline void slow_down(void)
{
int k;
for (k = 0; k < 10000; k++);
}
#else
#define slow_down()
#endif
void
prom_putchar(const unsigned char c)
{
unsigned char ch;
int i = 0;
do {
ch = com1[SER_CMD];
slow_down();
i++;
if (i > TIMEOUT)
break;
} while (0 == (ch & TX_BUSY));
com1[SER_DATA] = c;
}
arch/mips/alchemy/common/reset.c deleted 100644 → 0
View file @ 8d37a371
/*
*
* BRIEF MODULE DESCRIPTION
* Au1xx0 reset routines.
*
* Copyright 2001, 2006, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/gpio.h>
#include <asm/cacheflush.h>
#include <asm/mach-au1x00/au1000.h>
void au1000_restart(char *command)
{
/* Set all integrated peripherals to disabled states */
extern void board_reset(void);
u32 prid = read_c0_prid();
printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n");
switch (prid & 0xFF000000) {
case 0x00000000: /* Au1000 */
au_writel(0x02, 0xb0000010); /* ac97_enable */
au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
asm("sync");
au_writel(0x00, 0xb017fffc); /* usbh_enable */
au_writel(0x00, 0xb0200058); /* usbd_enable */
au_writel(0x00, 0xb0300040); /* ir_enable */
au_writel(0x00, 0xb4004104); /* mac dma */
au_writel(0x00, 0xb4004114); /* mac dma */
au_writel(0x00, 0xb4004124); /* mac dma */
au_writel(0x00, 0xb4004134); /* mac dma */
au_writel(0x00, 0xb0520000); /* macen0 */
au_writel(0x00, 0xb0520004); /* macen1 */
au_writel(0x00, 0xb1000008); /* i2s_enable */
au_writel(0x00, 0xb1100100); /* uart0_enable */
au_writel(0x00, 0xb1200100); /* uart1_enable */
au_writel(0x00, 0xb1300100); /* uart2_enable */
au_writel(0x00, 0xb1400100); /* uart3_enable */
au_writel(0x02, 0xb1600100); /* ssi0_enable */
au_writel(0x02, 0xb1680100); /* ssi1_enable */
au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
au_writel(0x00, 0xb1900028); /* sys_clksrc */
au_writel(0x10, 0xb1900060); /* sys_cpupll */
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */
break;
case 0x01000000: /* Au1500 */
au_writel(0x02, 0xb0000010); /* ac97_enable */
au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
asm("sync");
au_writel(0x00, 0xb017fffc); /* usbh_enable */
au_writel(0x00, 0xb0200058); /* usbd_enable */
au_writel(0x00, 0xb4004104); /* mac dma */
au_writel(0x00, 0xb4004114); /* mac dma */
au_writel(0x00, 0xb4004124); /* mac dma */
au_writel(0x00, 0xb4004134); /* mac dma */
au_writel(0x00, 0xb1520000); /* macen0 */
au_writel(0x00, 0xb1520004); /* macen1 */
au_writel(0x00, 0xb1100100); /* uart0_enable */
au_writel(0x00, 0xb1400100); /* uart3_enable */
au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
au_writel(0x00, 0xb1900028); /* sys_clksrc */
au_writel(0x10, 0xb1900060); /* sys_cpupll */
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */
break;
case 0x02000000: /* Au1100 */
au_writel(0x02, 0xb0000010); /* ac97_enable */
au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
asm("sync");
au_writel(0x00, 0xb017fffc); /* usbh_enable */
au_writel(0x00, 0xb0200058); /* usbd_enable */
au_writel(0x00, 0xb0300040); /* ir_enable */
au_writel(0x00, 0xb4004104); /* mac dma */
au_writel(0x00, 0xb4004114); /* mac dma */
au_writel(0x00, 0xb4004124); /* mac dma */
au_writel(0x00, 0xb4004134); /* mac dma */
au_writel(0x00, 0xb0520000); /* macen0 */
au_writel(0x00, 0xb1000008); /* i2s_enable */
au_writel(0x00, 0xb1100100); /* uart0_enable */
au_writel(0x00, 0xb1200100); /* uart1_enable */
au_writel(0x00, 0xb1400100); /* uart3_enable */
au_writel(0x02, 0xb1600100); /* ssi0_enable */
au_writel(0x02, 0xb1680100); /* ssi1_enable */
au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
au_writel(0x00, 0xb1900028); /* sys_clksrc */
au_writel(0x10, 0xb1900060); /* sys_cpupll */
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */
break;
case 0x03000000: /* Au1550 */
au_writel(0x00, 0xb1a00004); /* psc 0 */
au_writel(0x00, 0xb1b00004); /* psc 1 */
au_writel(0x00, 0xb0a00004); /* psc 2 */
au_writel(0x00, 0xb0b00004); /* psc 3 */
au_writel(0x00, 0xb017fffc); /* usbh_enable */
au_writel(0x00, 0xb0200058); /* usbd_enable */
au_writel(0x00, 0xb4004104); /* mac dma */
au_writel(0x00, 0xb4004114); /* mac dma */
au_writel(0x00, 0xb4004124); /* mac dma */
au_writel(0x00, 0xb4004134); /* mac dma */
au_writel(0x00, 0xb1520000); /* macen0 */
au_writel(0x00, 0xb1520004); /* macen1 */
au_writel(0x00, 0xb1100100); /* uart0_enable */
au_writel(0x00, 0xb1200100); /* uart1_enable */
au_writel(0x00, 0xb1400100); /* uart3_enable */
au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
au_writel(0x00, 0xb1900028); /* sys_clksrc */
au_writel(0x10, 0xb1900060); /* sys_cpupll */
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */
break;
}
set_c0_status(ST0_BEV | ST0_ERL);
change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
flush_cache_all();
write_c0_wired(0);
/* Give board a chance to do a hardware reset */
board_reset();
/* Jump to the beggining in case board_reset() is empty */
__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
}
void au1000_halt(void)
{
#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
/* Power off system */
printk(KERN_NOTICE "\n** Powering off...\n");
au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C);
au_sync();
while (1); /* should not get here */
#else
printk(KERN_NOTICE "\n** You can safely turn off the power\n");
#ifdef CONFIG_MIPS_MIRAGE
gpio_direction_output(210, 1);
#endif
#ifdef CONFIG_MIPS_DB1200
au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C);
#endif
#ifdef CONFIG_PM
au_sleep();
/* Should not get here */
printk(KERN_ERR "Unable to put CPU in sleep mode\n");
while (1);
#else
while (1)
__asm__(".set\tmips3\n\t"
"wait\n\t"
".set\tmips0");
#endif
#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */
}
void au1000_power_off(void)
{
au1000_halt();
}
arch/mips/alchemy/common/setup.c
View file @ f1dd6ad5
......@@ -29,18 +29,13 @@
#include <linux/ioport.h>
#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/time.h>
#include <au1000.h>
extern void __init board_setup(void);
extern void au1000_restart(char *);
extern void au1000_halt(void);
extern void au1000_power_off(void);
extern void set_cpuspec(void);
void __init plat_mem_setup(void)
......@@ -57,10 +52,6 @@ void __init plat_mem_setup(void)
/* this is faster than wasting cycles trying to approximate it */
preset_lpj = (est_freq >> 1) / HZ;
_machine_restart = au1000_restart;
_machine_halt = au1000_halt;
pm_power_off = au1000_power_off;
board_setup(); /* board specific setup */
if (au1xxx_cpu_needs_config_od())
......@@ -78,37 +69,20 @@ void __init plat_mem_setup(void)
iomem_resource.end = IOMEM_RESOURCE_END;
}
#if defined(CONFIG_64BIT_PHYS_ADDR)
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_PCI)
/* This routine should be valid for all Au1x based boards */
phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
{
u32 start = (u32)Au1500_PCI_MEM_START;
u32 end = (u32)Au1500_PCI_MEM_END;
/* Don't fixup 36-bit addresses */
if ((phys_addr >> 32) != 0)
return phys_addr;
#ifdef CONFIG_PCI
{
u32 start = (u32)Au1500_PCI_MEM_START;
u32 end = (u32)Au1500_PCI_MEM_END;
/* Check for PCI memory window */
if (phys_addr >= start && (phys_addr + size - 1) <= end)
return (phys_t)
((phys_addr - start) + Au1500_PCI_MEM_START);
}
#endif
/*
* All Au1xx0 SOCs have a PCMCIA controller.
* We setup our 32-bit pseudo addresses to be equal to the
* 36-bit addr >> 4, to make it easier to check the address
* and fix it.
* The PCMCIA socket 0 physical attribute address is 0xF 4000 0000.
* The pseudo address we use is 0xF400 0000. Any address over
* 0xF400 0000 is a PCMCIA pseudo address.
*/
if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF))
return (phys_t)(phys_addr << 4);
return (phys_t)((phys_addr - start) + Au1500_PCI_MEM_START);
/* default nop */
return phys_addr;
......
arch/mips/alchemy/common/time.c
View file @ f1dd6ad5
/*
* Copyright (C) 2008 Manuel Lauss <mano@roarinelk.homelinux.net>
* Copyright (C) 2008-2009 Manuel Lauss <manuel.lauss@gmail.com>
*
* Previous incarnations were:
* Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com>
......@@ -85,7 +85,6 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = {
.name = "rtcmatch2",
.features = CLOCK_EVT_FEAT_ONESHOT,
.rating = 100,
.irq = AU1000_RTC_MATCH2_INT,
.set_next_event = au1x_rtcmatch2_set_next_event,
.set_mode = au1x_rtcmatch2_set_mode,
.cpumask = cpu_all_mask,
......@@ -98,11 +97,13 @@ static struct irqaction au1x_rtcmatch2_irqaction = {
.dev_id = &au1x_rtcmatch2_clockdev,
};
void __init plat_time_init(void)
static int __init alchemy_time_init(unsigned int m2int)
{
struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
unsigned long t;
au1x_rtcmatch2_clockdev.irq = m2int;
/* Check if firmware (YAMON, ...) has enabled 32kHz and clock
* has been detected. If so install the rtcmatch2 clocksource,
* otherwise don't bother. Note that both bits being set is by
......@@ -148,13 +149,18 @@ void __init plat_time_init(void)
cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
cd->min_delta_ns = clockevent_delta2ns(8, cd); /* ~0.25ms */
clockevents_register_device(cd);
setup_irq(AU1000_RTC_MATCH2_INT, &au1x_rtcmatch2_irqaction);
setup_irq(m2int, &au1x_rtcmatch2_irqaction);
printk(KERN_INFO "Alchemy clocksource installed\n");
return;
return 0;
cntr_err:
return -1;
}
static void __init alchemy_setup_c0timer(void)
{
/*
* MIPS kernel assigns 'au1k_wait' to 'cpu_wait' before this
* function is called. Because the Alchemy counters are unusable
......@@ -166,3 +172,22 @@ void __init plat_time_init(void)
r4k_clockevent_init();
init_r4k_clocksource();
}
static int alchemy_m2inttab[] __initdata = {
AU1000_RTC_MATCH2_INT,
AU1500_RTC_MATCH2_INT,
AU1100_RTC_MATCH2_INT,
AU1550_RTC_MATCH2_INT,
AU1200_RTC_MATCH2_INT,
};
void __init plat_time_init(void)
{
int t;
t = alchemy_get_cputype();
if (t == ALCHEMY_CPU_UNKNOWN)
alchemy_setup_c0timer();
else if (alchemy_time_init(alchemy_m2inttab[t]))
alchemy_setup_c0timer();
}
arch/mips/alchemy/devboards/Makefile
View file @ f1dd6ad5
......@@ -2,7 +2,7 @@
# Alchemy Develboards
#
obj-y += prom.o
obj-y += prom.o bcsr.o platform.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_MIPS_PB1000) += pb1000/
obj-$(CONFIG_MIPS_PB1100) += pb1100/
......@@ -11,8 +11,10 @@ obj-$(CONFIG_MIPS_PB1500) += pb1500/
obj-$(CONFIG_MIPS_PB1550) += pb1550/
obj-$(CONFIG_MIPS_DB1000) += db1x00/
obj-$(CONFIG_MIPS_DB1100) += db1x00/
obj-$(CONFIG_MIPS_DB1200) += pb1200/
obj-$(CONFIG_MIPS_DB1200) += db1200/
obj-$(CONFIG_MIPS_DB1500) += db1x00/
obj-$(CONFIG_MIPS_DB1550) += db1x00/
obj-$(CONFIG_MIPS_BOSPORUS) += db1x00/
obj-$(CONFIG_MIPS_MIRAGE) += db1x00/
EXTRA_CFLAGS += -Werror
arch/mips/alchemy/devboards/bcsr.c 0 → 100644
View file @ f1dd6ad5
/*
* bcsr.h -- Db1xxx/Pb1xxx Devboard CPLD registers ("BCSR") abstraction.
*
* All Alchemy development boards (except, of course, the weird PB1000)
* have a few registers in a CPLD with standardised layout; they mostly
* only differ in base address.
* All registers are 16bits wide with 32bit spacing.
*/
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <asm/addrspace.h>
#include <asm/io.h>
#include <asm/mach-db1x00/bcsr.h>
static struct bcsr_reg {
void __iomem *raddr;
spinlock_t lock;
} bcsr_regs[BCSR_CNT];
static void __iomem *bcsr_virt; /* KSEG1 addr of BCSR base */
static int bcsr_csc_base; /* linux-irq of first cascaded irq */
void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys)
{
int i;
bcsr1_phys = KSEG1ADDR(CPHYSADDR(bcsr1_phys));
bcsr2_phys = KSEG1ADDR(CPHYSADDR(bcsr2_phys));
bcsr_virt = (void __iomem *)bcsr1_phys;
for (i = 0; i < BCSR_CNT; i++) {
if (i >= BCSR_HEXLEDS)
bcsr_regs[i].raddr = (void __iomem *)bcsr2_phys +
(0x04 * (i - BCSR_HEXLEDS));
else
bcsr_regs[i].raddr = (void __iomem *)bcsr1_phys +
(0x04 * i);
spin_lock_init(&bcsr_regs[i].lock);
}
}
unsigned short bcsr_read(enum bcsr_id reg)
{
unsigned short r;
unsigned long flags;
spin_lock_irqsave(&bcsr_regs[reg].lock, flags);
r = __raw_readw(bcsr_regs[reg].raddr);
spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags);
return r;
}
EXPORT_SYMBOL_GPL(bcsr_read);
void bcsr_write(enum bcsr_id reg, unsigned short val)
{
unsigned long flags;
spin_lock_irqsave(&bcsr_regs[reg].lock, flags);
__raw_writew(val, bcsr_regs[reg].raddr);
wmb();
spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags);
}
EXPORT_SYMBOL_GPL(bcsr_write);
void bcsr_mod(enum bcsr_id reg, unsigned short clr, unsigned short set)
{
unsigned short r;
unsigned long flags;
spin_lock_irqsave(&bcsr_regs[reg].lock, flags);
r = __raw_readw(bcsr_regs[reg].raddr);
r &= ~clr;
r |= set;
__raw_writew(r, bcsr_regs[reg].raddr);
wmb();
spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags);
}
EXPORT_SYMBOL_GPL(bcsr_mod);
/*
* DB1200/PB1200 CPLD IRQ muxer
*/
static void bcsr_csc_handler(unsigned int irq, struct irq_desc *d)
{
unsigned short bisr = __raw_readw(bcsr_virt + BCSR_REG_INTSTAT);
for ( ; bisr; bisr &= bisr - 1)
generic_handle_irq(bcsr_csc_base + __ffs(bisr));
}
/* NOTE: both the enable and mask bits must be cleared, otherwise the
* CPLD generates tons of spurious interrupts (at least on my DB1200).
* -- mlau
*/
static void bcsr_irq_mask(unsigned int irq_nr)
{
unsigned short v = 1 << (irq_nr - bcsr_csc_base);
__raw_writew(v, bcsr_virt + BCSR_REG_INTCLR);
__raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR);
wmb();
}
static void bcsr_irq_maskack(unsigned int irq_nr)
{
unsigned short v = 1 << (irq_nr - bcsr_csc_base);
__raw_writew(v, bcsr_virt + BCSR_REG_INTCLR);
__raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR);
__raw_writew(v, bcsr_virt + BCSR_REG_INTSTAT); /* ack */
wmb();
}
static void bcsr_irq_unmask(unsigned int irq_nr)
{
unsigned short v = 1 << (irq_nr - bcsr_csc_base);
__raw_writew(v, bcsr_virt + BCSR_REG_INTSET);
__raw_writew(v, bcsr_virt + BCSR_REG_MASKSET);
wmb();
}
static struct irq_chip bcsr_irq_type = {
.name = "CPLD",
.mask = bcsr_irq_mask,
.mask_ack = bcsr_irq_maskack,
.unmask = bcsr_irq_unmask,
};
void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq)
{
unsigned int irq;
/* mask & disable & ack all */
__raw_writew(0xffff, bcsr_virt + BCSR_REG_INTCLR);
__raw_writew(0xffff, bcsr_virt + BCSR_REG_MASKCLR);
__raw_writew(0xffff, bcsr_virt + BCSR_REG_INTSTAT);
wmb();
bcsr_csc_base = csc_start;
for (irq = csc_start; irq <= csc_end; irq++)
set_irq_chip_and_handler_name(irq, &bcsr_irq_type,
handle_level_irq, "level");
set_irq_chained_handler(hook_irq, bcsr_csc_handler);
}
arch/mips/alchemy/devboards/db1200/platform.c 0 → 100644
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/alchemy/devboards/db1200/setup.c 0 → 100644
View file @ f1dd6ad5
/*
* Alchemy/AMD/RMI DB1200 board setup.
*
* Licensed under the terms outlined in the file COPYING in the root of
* this source archive.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h>
#include <asm/mach-db1x00/db1200.h>
const char *get_system_type(void)
{
return "Alchemy Db1200";
}
void __init board_setup(void)
{
unsigned long freq0, clksrc, div, pfc;
unsigned short whoami;
bcsr_init(DB1200_BCSR_PHYS_ADDR,
DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
whoami = bcsr_read(BCSR_WHOAMI);
printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d"
" Board-ID %d Daughtercard ID %d\n",
(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
/* SMBus/SPI on PSC0, Audio on PSC1 */
pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */
__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
wmb();
/* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from
* CPU clock; all other clock generators off/unused.
*/
div = (get_au1x00_speed() + 25000000) / 50000000;
if (div & 1)
div++;
div = ((div >> 1) - 1) & 0xff;
freq0 = div << SYS_FC_FRDIV0_BIT;
__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
wmb();
freq0 |= SYS_FC_FE0; /* enable F0 */
__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
wmb();
/* psc0_intclk comes 1:1 from F0 */
clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT;
__raw_writel(clksrc, (void __iomem *)SYS_CLKSRC);
wmb();
}
/* use the hexleds to count the number of times the cpu has entered
* wait, the dots to indicate whether the CPU is currently idle or
* active (dots off = sleeping, dots on = working) for cases where
* the number doesn't change for a long(er) period of time.
*/
static void db1200_wait(void)
{
__asm__(" .set push \n"
" .set mips3 \n"
" .set noreorder \n"
" cache 0x14, 0(%0) \n"
" cache 0x14, 32(%0) \n"
" cache 0x14, 64(%0) \n"
/* dots off: we're about to call wait */
" lui $26, 0xb980 \n"
" ori $27, $0, 3 \n"
" sb $27, 0x18($26) \n"
" sync \n"
" nop \n"
" wait \n"
" nop \n"
" nop \n"
" nop \n"
" nop \n"
" nop \n"
/* dots on: there's work to do, increment cntr */
" lui $26, 0xb980 \n"
" sb $0, 0x18($26) \n"
" lui $26, 0xb9c0 \n"
" lb $27, 0($26) \n"
" addiu $27, $27, 1 \n"
" sb $27, 0($26) \n"
" sync \n"
" .set pop \n"
: : "r" (db1200_wait));
}
static int __init db1200_arch_init(void)
{
/* GPIO7 is low-level triggered CPLD cascade */
set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
/* do not autoenable these: CPLD has broken edge int handling,
* and the CD handler setup requires manual enabling to work
* around that.
*/
irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN;
irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN;
if (cpu_wait)
cpu_wait = db1200_wait;
return 0;
}
arch_initcall(db1200_arch_init);
arch/mips/alchemy/devboards/db1x00/Makefile
View file @ f1dd6ad5
......@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
#
obj-y := board_setup.o irqmap.o
obj-y := board_setup.o platform.o
arch/mips/alchemy/devboards/db1x00/board_setup.c
View file @ f1dd6ad5
......@@ -29,59 +29,139 @@
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pm.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_eth.h>
#include <asm/mach-db1x00/db1x00.h>
#include <asm/mach-db1x00/bcsr.h>
#include <asm/reboot.h>
#include <prom.h>
#ifdef CONFIG_MIPS_DB1500
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371 */
[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
};
#endif
static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
#ifdef CONFIG_MIPS_DB1550
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, AU1550_PCI_INTC, 0xff, 0xff, 0xff }, /* IDSEL 11 - on-board HPT371 */
[12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */
[13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
#endif
#ifdef CONFIG_MIPS_BOSPORUS
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI */
[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - SN1741 */
[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
};
/*
* Micrel/Kendin 5 port switch attached to MAC0,
* MAC0 is associated with PHY address 5 (== WAN port)
* MAC1 is not associated with any PHY, since it's connected directly
* to the switch.
* no interrupts are used
*/
static struct au1000_eth_platform_data eth0_pdata = {
.phy_static_config = 1,
.phy_addr = 5,
};
static void bosporus_power_off(void)
{
printk(KERN_INFO "It's now safe to turn off power\n");
while (1)
asm volatile (".set mips3 ; wait ; .set mips0");
}
const char *get_system_type(void)
{
#ifdef CONFIG_MIPS_BOSPORUS
return "Alchemy Bosporus Gateway Reference";
#else
return "Alchemy Db1x00";
}
#endif
#ifdef CONFIG_MIPS_MIRAGE
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, AU1500_PCI_INTD, 0xff, 0xff, 0xff }, /* IDSEL 11 - SMI VGX */
[12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */
[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */
};
static void mirage_power_off(void)
{
alchemy_gpio_direction_output(210, 1);
}
const char *get_system_type(void)
{
return "Alchemy Mirage";
}
#endif
#if defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE)
static void mips_softreset(void)
{
asm volatile ("jr\t%0" : : "r"(0xbfc00000));
}
void board_reset(void)
#else
const char *get_system_type(void)
{
/* Hit BCSR.SW_RESET[RESET] */
bcsr->swreset = 0x0000;
return "Alchemy Db1x00";
}
#endif
void __init board_setup(void)
{
u32 pin_func = 0;
char *argptr;
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_8250_CONSOLE
argptr = strstr(argptr, "console=");
if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
unsigned long bcsr1, bcsr2;
u32 pin_func;
bcsr1 = DB1000_BCSR_PHYS_ADDR;
bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS;
pin_func = 0;
#ifdef CONFIG_MIPS_DB1000
printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1500
printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1100
printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
#endif
#ifdef CONFIG_MIPS_BOSPORUS
au1xxx_override_eth_cfg(0, &eth0_pdata);
#ifdef CONFIG_FB_AU1100
argptr = strstr(argptr, "video=");
if (argptr == NULL) {
argptr = prom_getcmdline();
/* default panel */
/*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
}
printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
#endif
#ifdef CONFIG_MIPS_MIRAGE
printk(KERN_INFO "AMD Alchemy Mirage Board\n");
#endif
#ifdef CONFIG_MIPS_DB1550
printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
/* au1000 does not support vra, au1500 and au1100 do */
strcat(argptr, " au1000_audio=vra");
argptr = prom_getcmdline();
bcsr1 = DB1550_BCSR_PHYS_ADDR;
bcsr2 = DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS;
#endif
/* initialize board register space */
bcsr_init(bcsr1, bcsr2);
/* Not valid for Au1550 */
#if defined(CONFIG_IRDA) && \
(defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
......@@ -89,11 +169,10 @@ void __init board_setup(void)
pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
au_writel(pin_func, SYS_PINFUNC);
/* Power off until the driver is in use */
bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
au_sync();
bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
BCSR_RESETS_IRDA_MODE_OFF);
#endif
bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */
/* Enable GPIO[31:0] inputs */
alchemy_gpio1_input_enable();
......@@ -120,26 +199,53 @@ void __init board_setup(void)
* be part of the audio driver.
*/
alchemy_gpio_direction_output(209, 1);
#endif
au_sync();
#ifdef CONFIG_MIPS_DB1000
printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1500
printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1100
printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
pm_power_off = mirage_power_off;
_machine_halt = mirage_power_off;
_machine_restart = (void(*)(char *))mips_softreset;
#endif
#ifdef CONFIG_MIPS_BOSPORUS
printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
pm_power_off = bosporus_power_off;
_machine_halt = bosporus_power_off;
_machine_restart = (void(*)(char *))mips_softreset;
#endif
#ifdef CONFIG_MIPS_MIRAGE
printk(KERN_INFO "AMD Alchemy Mirage Board\n");
#endif
#ifdef CONFIG_MIPS_DB1550
printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
au_sync();
}
static int __init db1x00_init_irq(void)
{
#if defined(CONFIG_MIPS_MIRAGE)
set_irq_type(AU1500_GPIO7_INT, IRQF_TRIGGER_RISING); /* TS pendown */
#elif defined(CONFIG_MIPS_DB1550)
set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); /* CD1# */
set_irq_type(AU1550_GPIO3_INT, IRQF_TRIGGER_LOW); /* CARD0# */
set_irq_type(AU1550_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
set_irq_type(AU1550_GPIO21_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
set_irq_type(AU1550_GPIO22_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
#elif defined(CONFIG_MIPS_DB1500)
set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
#elif defined(CONFIG_MIPS_DB1100)
set_irq_type(AU1100_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1100_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
set_irq_type(AU1100_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
set_irq_type(AU1100_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
set_irq_type(AU1100_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
set_irq_type(AU1100_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
#elif defined(CONFIG_MIPS_DB1000)
set_irq_type(AU1000_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1000_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
set_irq_type(AU1000_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
set_irq_type(AU1000_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
set_irq_type(AU1000_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
set_irq_type(AU1000_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
#endif
return 0;
}
arch_initcall(db1x00_init_irq);
arch/mips/alchemy/devboards/db1x00/irqmap.c deleted 100644 → 0
View file @ 8d37a371
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx irq map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_MIPS_DB1500
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_BOSPORUS
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_MIRAGE
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
[12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
[13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
};
#endif
#ifdef CONFIG_MIPS_DB1550
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
#endif
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
#ifndef CONFIG_MIPS_MIRAGE
#ifdef CONFIG_MIPS_DB1550
{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
#else
{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 Fully_Interted# */
{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 STSCHG# */
{ AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 Fully_Interted# */
{ AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 STSCHG# */
{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
#endif
#else
{ AU1000_GPIO_7, IRQF_TRIGGER_RISING, 0 }, /* touchscreen pen down */
#endif
};
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
arch/mips/alchemy/devboards/db1x00/platform.c 0 → 100644
View file @ f1dd6ad5
/*
* DBAu1xxx board platform device registration
*
* Copyright (C) 2009 Manuel Lauss
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
/* DB1xxx PCMCIA interrupt sources:
* CD0/1 GPIO0/3
* STSCHG0/1 GPIO1/4
* CARD0/1 GPIO2/5
* Db1550: 0/1, 21/22, 3/5
*/
#define DB1XXX_HAS_PCMCIA
#define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT)
#if defined(CONFIG_MIPS_DB1000)
#define DB1XXX_PCMCIA_CD0 AU1000_GPIO0_INT
#define DB1XXX_PCMCIA_STSCHG0 AU1000_GPIO1_INT
#define DB1XXX_PCMCIA_CARD0 AU1000_GPIO2_INT
#define DB1XXX_PCMCIA_CD1 AU1000_GPIO3_INT
#define DB1XXX_PCMCIA_STSCHG1 AU1000_GPIO4_INT
#define DB1XXX_PCMCIA_CARD1 AU1000_GPIO5_INT
#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#elif defined(CONFIG_MIPS_DB1100)
#define DB1XXX_PCMCIA_CD0 AU1100_GPIO0_INT
#define DB1XXX_PCMCIA_STSCHG0 AU1100_GPIO1_INT
#define DB1XXX_PCMCIA_CARD0 AU1100_GPIO2_INT
#define DB1XXX_PCMCIA_CD1 AU1100_GPIO3_INT
#define DB1XXX_PCMCIA_STSCHG1 AU1100_GPIO4_INT
#define DB1XXX_PCMCIA_CARD1 AU1100_GPIO5_INT
#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#elif defined(CONFIG_MIPS_DB1500)
#define DB1XXX_PCMCIA_CD0 AU1500_GPIO0_INT
#define DB1XXX_PCMCIA_STSCHG0 AU1500_GPIO1_INT
#define DB1XXX_PCMCIA_CARD0 AU1500_GPIO2_INT
#define DB1XXX_PCMCIA_CD1 AU1500_GPIO3_INT
#define DB1XXX_PCMCIA_STSCHG1 AU1500_GPIO4_INT
#define DB1XXX_PCMCIA_CARD1 AU1500_GPIO5_INT
#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#elif defined(CONFIG_MIPS_DB1550)
#define DB1XXX_PCMCIA_CD0 AU1550_GPIO0_INT
#define DB1XXX_PCMCIA_STSCHG0 AU1550_GPIO21_INT
#define DB1XXX_PCMCIA_CARD0 AU1550_GPIO3_INT
#define DB1XXX_PCMCIA_CD1 AU1550_GPIO1_INT
#define DB1XXX_PCMCIA_STSCHG1 AU1550_GPIO22_INT
#define DB1XXX_PCMCIA_CARD1 AU1550_GPIO5_INT
#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#else
/* other board: no PCMCIA */
#undef DB1XXX_HAS_PCMCIA
#undef F_SWAPPED
#define F_SWAPPED 0
#if defined(CONFIG_MIPS_BOSPORUS)
#define BOARD_FLASH_SIZE 0x01000000 /* 16MB */
#define BOARD_FLASH_WIDTH 2 /* 16-bits */
#elif defined(CONFIG_MIPS_MIRAGE)
#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#endif
#endif
static int __init db1xxx_dev_init(void)
{
#ifdef DB1XXX_HAS_PCMCIA
db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
PCMCIA_MEM_PHYS_ADDR,
PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
PCMCIA_IO_PHYS_ADDR,
PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
DB1XXX_PCMCIA_CARD0,
DB1XXX_PCMCIA_CD0,
/*DB1XXX_PCMCIA_STSCHG0*/0,
0,
0);
db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
PCMCIA_MEM_PHYS_ADDR + 0x004000000,
PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1,
PCMCIA_IO_PHYS_ADDR + 0x004000000,
PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1,
DB1XXX_PCMCIA_CARD1,
DB1XXX_PCMCIA_CD1,
/*DB1XXX_PCMCIA_STSCHG1*/0,
0,
1);
#endif
db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED);
return 0;
}
device_initcall(db1xxx_dev_init);
arch/mips/alchemy/devboards/pb1000/board_setup.c
View file @ f1dd6ad5
......@@ -31,11 +31,7 @@
#include <asm/mach-pb1x00/pb1000.h>
#include <prom.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_15, IRQF_TRIGGER_LOW, 0 },
};
#include "../platform.h"
const char *get_system_type(void)
{
......@@ -46,25 +42,14 @@ void board_reset(void)
{
}
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
void __init board_setup(void)
{
u32 pin_func, static_cfg0;
u32 sys_freqctrl, sys_clksrc;
u32 prid = read_c0_prid();
#ifdef CONFIG_SERIAL_8250_CONSOLE
char *argptr = prom_getcmdline();
argptr = strstr(argptr, "console=");
if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
sys_freqctrl = 0;
sys_clksrc = 0;
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
......@@ -193,3 +178,16 @@ void __init board_setup(void)
break;
}
}
static int __init pb1000_init_irq(void)
{
set_irq_type(AU1000_GPIO15_INT, IRQF_TRIGGER_LOW);
return 0;
}
arch_initcall(pb1000_init_irq);
static int __init pb1000_device_init(void)
{
return db1x_register_norflash(8 * 1024 * 1024, 4, 0);
}
device_initcall(pb1000_device_init);
arch/mips/alchemy/devboards/pb1100/Makefile
View file @ f1dd6ad5
......@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor Pb1100 board.
#
obj-y := board_setup.o
obj-y := board_setup.o platform.o
arch/mips/alchemy/devboards/pb1100/board_setup.c
View file @ f1dd6ad5
......@@ -29,19 +29,11 @@
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1100.h>
#include <asm/mach-db1x00/bcsr.h>
#include <prom.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_9, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card Fully_Inserted# */
{ AU1000_GPIO_10, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card STSCHG# */
{ AU1000_GPIO_11, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card IRQ# */
{ AU1000_GPIO_13, IRQF_TRIGGER_LOW, 0 }, /* DC_IRQ# */
};
const char *get_system_type(void)
{
return "Alchemy Pb1100";
......@@ -49,43 +41,15 @@ const char *get_system_type(void)
void board_reset(void)
{
/* Hit BCSR.RST_VDDI[SOFT_RESET] */
au_writel(0x00000000, PB1100_RST_VDDI);
}
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
bcsr_write(BCSR_SYSTEM, 0);
}
void __init board_setup(void)
{
volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
char *argptr;
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_8250_CONSOLE
argptr = strstr(argptr, "console=");
if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
#ifdef CONFIG_FB_AU1100
argptr = strstr(argptr, "video=");
if (argptr == NULL) {
argptr = prom_getcmdline();
/* default panel */
/*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
}
#endif
#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
/* au1000 does not support vra, au1500 and au1100 do */
strcat(argptr, " au1000_audio=vra");
argptr = prom_getcmdline();
#endif
bcsr_init(DB1000_BCSR_PHYS_ADDR,
DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
......@@ -155,3 +119,14 @@ void __init board_setup(void)
au_sync();
}
}
static int __init pb1100_init_irq(void)
{
set_irq_type(AU1100_GPIO9_INT, IRQF_TRIGGER_LOW); /* PCCD# */
set_irq_type(AU1100_GPIO10_INT, IRQF_TRIGGER_LOW); /* PCSTSCHG# */
set_irq_type(AU1100_GPIO11_INT, IRQF_TRIGGER_LOW); /* PCCard# */
set_irq_type(AU1100_GPIO13_INT, IRQF_TRIGGER_LOW); /* DC_IRQ# */
return 0;
}
arch_initcall(pb1100_init_irq);
arch/mips/alchemy/devboards/pb1100/platform.c 0 → 100644
View file @ f1dd6ad5
/*
* Pb1100 board platform device registration
*
* Copyright (C) 2009 Manuel Lauss
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
static int __init pb1100_dev_init(void)
{
int swapped;
/* PCMCIA. single socket, identical to Pb1500 */
db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
PCMCIA_MEM_PHYS_ADDR,
PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
PCMCIA_IO_PHYS_ADDR,
PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
AU1100_GPIO11_INT, /* card */
AU1100_GPIO9_INT, /* insert */
/*AU1100_GPIO10_INT*/0, /* stschg */
0, /* eject */
0); /* id */
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT;
db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
return 0;
}
device_initcall(pb1100_dev_init);
arch/mips/alchemy/devboards/pb1200/Makefile
View file @ f1dd6ad5
......@@ -2,6 +2,6 @@
# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
#
obj-y := board_setup.o irqmap.o platform.o
obj-y := board_setup.o platform.o
EXTRA_CFLAGS += -Werror
arch/mips/alchemy/devboards/pb1200/board_setup.c
View file @ f1dd6ad5
......@@ -25,11 +25,23 @@
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <prom.h>
#include <au1xxx.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h>
#ifdef CONFIG_MIPS_PB1200
#include <asm/mach-pb1x00/pb1200.h>
#endif
#ifdef CONFIG_MIPS_DB1200
#include <asm/mach-db1x00/db1200.h>
#define PB1200_INT_BEGIN DB1200_INT_BEGIN
#define PB1200_INT_END DB1200_INT_END
#endif
#include <prom.h>
const char *get_system_type(void)
{
......@@ -38,25 +50,15 @@ const char *get_system_type(void)
void board_reset(void)
{
bcsr->resets = 0;
bcsr->system = 0;
bcsr_write(BCSR_RESETS, 0);
bcsr_write(BCSR_SYSTEM, 0);
}
void __init board_setup(void)
{
char *argptr;
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_8250_CONSOLE
argptr = strstr(argptr, "console=");
if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
#ifdef CONFIG_FB_AU1200
strcat(argptr, " video=au1200fb:panel:bs");
#endif
printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
bcsr_init(PB1200_BCSR_PHYS_ADDR,
PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
#if 0
{
......@@ -82,7 +84,7 @@ void __init board_setup(void)
u32 pin_func;
/* Select SMBus in CPLD */
bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
pin_func = au_readl(SYS_PINFUNC);
au_sync();
......@@ -116,38 +118,54 @@ void __init board_setup(void)
/*
* The Pb1200 development board uses external MUX for PSC0 to
* support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
* support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI
*/
#ifdef CONFIG_I2C_AU1550
bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
#endif
au_sync();
}
#ifdef CONFIG_MIPS_PB1200
printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1200
printk(KERN_INFO "AMD Alchemy Db1200 Board\n");
#endif
static int __init pb1200_init_irq(void)
{
/* We have a problem with CPLD rev 3. */
if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
printk(KERN_ERR "updated to latest revision. This software will\n");
printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
panic("Game over. Your score is 0.");
}
set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT);
return 0;
}
arch_initcall(pb1200_init_irq);
int board_au1200fb_panel(void)
{
BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
int p;
p = bcsr->switches;
p >>= 8;
p &= 0x0F;
return p;
return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
}
int board_au1200fb_panel_init(void)
{
/* Apply power */
BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL;
bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
BCSR_BOARD_LCDBL);
/* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */
return 0;
}
......@@ -155,10 +173,8 @@ int board_au1200fb_panel_init(void)
int board_au1200fb_panel_shutdown(void)
{
/* Remove power */
BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
BCSR_BOARD_LCDBL);
bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
BCSR_BOARD_LCDBL, 0);
/* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */
return 0;
}
arch/mips/alchemy/devboards/pb1200/irqmap.c deleted 100644 → 0
View file @ 8d37a371
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx irq map table
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_MIPS_PB1200
#include <asm/mach-pb1x00/pb1200.h>
#endif
#ifdef CONFIG_MIPS_DB1200
#include <asm/mach-db1x00/db1200.h>
#define PB1200_INT_BEGIN DB1200_INT_BEGIN
#define PB1200_INT_END DB1200_INT_END
#endif
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
/* This is external interrupt cascade */
{ AU1000_GPIO_7, IRQF_TRIGGER_LOW, 0 },
};
/*
* Support for External interrupts on the Pb1200 Development platform.
*/
static void pb1200_cascade_handler(unsigned int irq, struct irq_desc *d)
{
unsigned short bisr = bcsr->int_status;
for ( ; bisr; bisr &= bisr - 1)
generic_handle_irq(PB1200_INT_BEGIN + __ffs(bisr));
}
/* NOTE: both the enable and mask bits must be cleared, otherwise the
* CPLD generates tons of spurious interrupts (at least on the DB1200).
*/
static void pb1200_mask_irq(unsigned int irq_nr)
{
bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
au_sync();
}
static void pb1200_maskack_irq(unsigned int irq_nr)
{
bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
bcsr->int_status = 1 << (irq_nr - PB1200_INT_BEGIN); /* ack */
au_sync();
}
static void pb1200_unmask_irq(unsigned int irq_nr)
{
bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
au_sync();
}
static struct irq_chip pb1200_cpld_irq_type = {
#ifdef CONFIG_MIPS_PB1200
.name = "Pb1200 Ext",
#endif
#ifdef CONFIG_MIPS_DB1200
.name = "Db1200 Ext",
#endif
.mask = pb1200_mask_irq,
.mask_ack = pb1200_maskack_irq,
.unmask = pb1200_unmask_irq,
};
void __init board_init_irq(void)
{
unsigned int irq;
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
#ifdef CONFIG_MIPS_PB1200
/* We have a problem with CPLD rev 3. */
if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
printk(KERN_ERR "updated to latest revision. This software will\n");
printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
panic("Game over. Your score is 0.");
}
#endif
/* mask & disable & ack all */
bcsr->intclr_mask = 0xffff;
bcsr->intclr = 0xffff;
bcsr->int_status = 0xffff;
au_sync();
for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++)
set_irq_chip_and_handler_name(irq, &pb1200_cpld_irq_type,
handle_level_irq, "level");
set_irq_chained_handler(AU1000_GPIO_7, pb1200_cascade_handler);
}
arch/mips/alchemy/devboards/pb1200/platform.c
View file @ f1dd6ad5
......@@ -26,27 +26,30 @@
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1100_mmc.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
static int mmc_activity;
static void pb1200mmc0_set_power(void *mmc_host, int state)
{
if (state)
bcsr->board |= BCSR_BOARD_SD0PWR;
bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
else
bcsr->board &= ~BCSR_BOARD_SD0PWR;
bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
au_sync_delay(1);
msleep(1);
}
static int pb1200mmc0_card_readonly(void *mmc_host)
{
return (bcsr->status & BCSR_STATUS_SD0WP) ? 1 : 0;
return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0;
}
static int pb1200mmc0_card_inserted(void *mmc_host)
{
return (bcsr->sig_status & BCSR_INT_SD0INSERT) ? 1 : 0;
return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0;
}
static void pb1200_mmcled_set(struct led_classdev *led,
......@@ -54,10 +57,10 @@ static void pb1200_mmcled_set(struct led_classdev *led,
{
if (brightness != LED_OFF) {
if (++mmc_activity == 1)
bcsr->disk_leds &= ~(1 << 8);
bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
} else {
if (--mmc_activity == 0)
bcsr->disk_leds |= (1 << 8);
bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
}
}
......@@ -65,27 +68,25 @@ static struct led_classdev pb1200mmc_led = {
.brightness_set = pb1200_mmcled_set,
};
#ifndef CONFIG_MIPS_DB1200
static void pb1200mmc1_set_power(void *mmc_host, int state)
{
if (state)
bcsr->board |= BCSR_BOARD_SD1PWR;
bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR);
else
bcsr->board &= ~BCSR_BOARD_SD1PWR;
bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0);
au_sync_delay(1);
msleep(1);
}
static int pb1200mmc1_card_readonly(void *mmc_host)
{
return (bcsr->status & BCSR_STATUS_SD1WP) ? 1 : 0;
return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0;
}
static int pb1200mmc1_card_inserted(void *mmc_host)
{
return (bcsr->sig_status & BCSR_INT_SD1INSERT) ? 1 : 0;
return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
}
#endif
const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
[0] = {
......@@ -95,7 +96,6 @@ const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
.cd_setup = NULL, /* use poll-timer in driver */
.led = &pb1200mmc_led,
},
#ifndef CONFIG_MIPS_DB1200
[1] = {
.set_power = pb1200mmc1_set_power,
.card_inserted = pb1200mmc1_card_inserted,
......@@ -103,7 +103,6 @@ const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
.cd_setup = NULL, /* use poll-timer in driver */
.led = &pb1200mmc_led,
},
#endif
};
static struct resource ide_resources[] = {
......@@ -169,8 +168,36 @@ static struct platform_device *board_platform_devices[] __initdata = {
static int __init board_register_devices(void)
{
int swapped;
db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
PCMCIA_MEM_PHYS_ADDR,
PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
PCMCIA_IO_PHYS_ADDR,
PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
PB1200_PC0_INT,
PB1200_PC0_INSERT_INT,
/*PB1200_PC0_STSCHG_INT*/0,
PB1200_PC0_EJECT_INT,
0);
db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
PCMCIA_MEM_PHYS_ADDR + 0x008000000,
PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1,
PCMCIA_IO_PHYS_ADDR + 0x008000000,
PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1,
PB1200_PC1_INT,
PB1200_PC1_INSERT_INT,
/*PB1200_PC1_STSCHG_INT*/0,
PB1200_PC1_EJECT_INT,
1);
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
db1x_register_norflash(128 * 1024 * 1024, 2, swapped);
return platform_add_devices(board_platform_devices,
ARRAY_SIZE(board_platform_devices));
}
arch_initcall(board_register_devices);
device_initcall(board_register_devices);
arch/mips/alchemy/devboards/pb1500/Makefile
View file @ f1dd6ad5
......@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor Pb1500 board.
#
obj-y := board_setup.o
obj-y := board_setup.o platform.o
arch/mips/alchemy/devboards/pb1500/board_setup.c
View file @ f1dd6ad5
......@@ -29,22 +29,14 @@
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1500.h>
#include <asm/mach-db1x00/bcsr.h>
#include <prom.h>
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT370 */
[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
};
......@@ -55,35 +47,16 @@ const char *get_system_type(void)
void board_reset(void)
{
/* Hit BCSR.RST_VDDI[SOFT_RESET] */
au_writel(0x00000000, PB1500_RST_VDDI);
}
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
bcsr_write(BCSR_SYSTEM, 0);
}
void __init board_setup(void)
{
u32 pin_func;
u32 sys_freqctrl, sys_clksrc;
char *argptr;
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_8250_CONSOLE
argptr = strstr(argptr, "console=");
if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
/* au1000 does not support vra, au1500 and au1100 do */
strcat(argptr, " au1000_audio=vra");
argptr = prom_getcmdline();
#endif
bcsr_init(DB1000_BCSR_PHYS_ADDR,
DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
sys_clksrc = sys_freqctrl = pin_func = 0;
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
......@@ -163,3 +136,18 @@ void __init board_setup(void)
au_sync();
}
}
static int __init pb1500_init_irq(void)
{
set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW); /* CARD0 */
set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
return 0;
}
arch_initcall(pb1500_init_irq);
arch/mips/alchemy/devboards/pb1500/platform.c 0 → 100644
View file @ f1dd6ad5
/*
* Pb1500 board platform device registration
*
* Copyright (C) 2009 Manuel Lauss
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
static int __init pb1500_dev_init(void)
{
int swapped;
/* PCMCIA. single socket, identical to Pb1500 */
db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
PCMCIA_MEM_PHYS_ADDR,
PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
PCMCIA_IO_PHYS_ADDR,
PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
AU1500_GPIO11_INT, /* card */
AU1500_GPIO9_INT, /* insert */
/*AU1500_GPIO10_INT*/0, /* stschg */
0, /* eject */
0); /* id */
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT;
db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
return 0;
}
device_initcall(pb1500_dev_init);
arch/mips/alchemy/devboards/pb1550/Makefile
View file @ f1dd6ad5
......@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor Pb1550 board.
#
obj-y := board_setup.o
obj-y := board_setup.o platform.o
arch/mips/alchemy/devboards/pb1550/board_setup.c
View file @ f1dd6ad5
......@@ -32,18 +32,15 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1550.h>
#include <asm/mach-db1x00/bcsr.h>
#include <asm/mach-au1x00/gpio.h>
#include <prom.h>
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
[12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */
[13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
const char *get_system_type(void)
......@@ -53,28 +50,17 @@ const char *get_system_type(void)
void board_reset(void)
{
/* Hit BCSR.SYSTEM[RESET] */
au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C);
}
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
bcsr_write(BCSR_SYSTEM, 0);
}
void __init board_setup(void)
{
u32 pin_func;
#ifdef CONFIG_SERIAL_8250_CONSOLE
char *argptr;
argptr = prom_getcmdline();
argptr = strstr(argptr, "console=");
if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
bcsr_init(PB1550_BCSR_PHYS_ADDR,
PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
alchemy_gpio2_enable();
/*
* Enable PSC1 SYNC for AC'97. Normaly done in audio driver,
......@@ -85,8 +71,21 @@ void __init board_setup(void)
pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
au_writel(pin_func, SYS_PINFUNC);
au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
au_sync();
bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */
printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
}
static int __init pb1550_init_irq(void)
{
set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH);
/* enable both PCMCIA card irqs in the shared line */
alchemy_gpio2_enable_int(201);
alchemy_gpio2_enable_int(202);
return 0;
}
arch_initcall(pb1550_init_irq);
arch/mips/alchemy/devboards/pb1550/platform.c 0 → 100644
View file @ f1dd6ad5
/*
* Pb1550 board platform device registration
*
* Copyright (C) 2009 Manuel Lauss
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1550.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
static int __init pb1550_dev_init(void)
{
int swapped;
/* Pb1550, like all others, also has statuschange irqs; however they're
* wired up on one of the Au1550's shared GPIO201_205 line, which also
* services the PCMCIA card interrupts. So we ignore statuschange and
* use the GPIO201_205 exclusively for card interrupts, since a) pcmcia
* drivers are used to shared irqs and b) statuschange isn't really use-
* ful anyway.
*/
db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
PCMCIA_MEM_PHYS_ADDR,
PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
PCMCIA_IO_PHYS_ADDR,
PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
AU1550_GPIO201_205_INT,
AU1550_GPIO0_INT,
0,
0,
0);
db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
PCMCIA_MEM_PHYS_ADDR + 0x008000000,
PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1,
PCMCIA_IO_PHYS_ADDR + 0x008000000,
PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1,
AU1550_GPIO201_205_INT,
AU1550_GPIO1_INT,
0,
0,
1);
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT;
db1x_register_norflash(128 * 1024 * 1024, 4, swapped);
return 0;
}
device_initcall(pb1550_dev_init);
arch/mips/alchemy/devboards/platform.c 0 → 100644
View file @ f1dd6ad5
/*
* devoard misc stuff.
*/
#include <linux/init.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <asm/reboot.h>
#include <asm/mach-db1x00/bcsr.h>
static void db1x_power_off(void)
{
bcsr_write(BCSR_RESETS, 0);
bcsr_write(BCSR_SYSTEM, BCSR_SYSTEM_PWROFF | BCSR_SYSTEM_RESET);
}
static void db1x_reset(char *c)
{
bcsr_write(BCSR_RESETS, 0);
bcsr_write(BCSR_SYSTEM, 0);
}
static int __init db1x_poweroff_setup(void)
{
if (!pm_power_off)
pm_power_off = db1x_power_off;
if (!_machine_halt)
_machine_halt = db1x_power_off;
if (!_machine_restart)
_machine_restart = db1x_reset;
return 0;
}
late_initcall(db1x_poweroff_setup);
/* register a pcmcia socket */
int __init db1x_register_pcmcia_socket(phys_addr_t pcmcia_attr_start,
phys_addr_t pcmcia_attr_end,
phys_addr_t pcmcia_mem_start,
phys_addr_t pcmcia_mem_end,
phys_addr_t pcmcia_io_start,
phys_addr_t pcmcia_io_end,
int card_irq,
int cd_irq,
int stschg_irq,
int eject_irq,
int id)
{
int cnt, i, ret;
struct resource *sr;
struct platform_device *pd;
cnt = 5;
if (eject_irq)
cnt++;
if (stschg_irq)
cnt++;
sr = kzalloc(sizeof(struct resource) * cnt, GFP_KERNEL);
if (!sr)
return -ENOMEM;
pd = platform_device_alloc("db1xxx_pcmcia", id);
if (!pd) {
ret = -ENOMEM;
goto out;
}
sr[0].name = "pcmcia-attr";
sr[0].flags = IORESOURCE_MEM;
sr[0].start = pcmcia_attr_start;
sr[0].end = pcmcia_attr_end;
sr[1].name = "pcmcia-mem";
sr[1].flags = IORESOURCE_MEM;
sr[1].start = pcmcia_mem_start;
sr[1].end = pcmcia_mem_end;
sr[2].name = "pcmcia-io";
sr[2].flags = IORESOURCE_MEM;
sr[2].start = pcmcia_io_start;
sr[2].end = pcmcia_io_end;
sr[3].name = "insert";
sr[3].flags = IORESOURCE_IRQ;
sr[3].start = sr[3].end = cd_irq;
sr[4].name = "card";
sr[4].flags = IORESOURCE_IRQ;
sr[4].start = sr[4].end = card_irq;
i = 5;
if (stschg_irq) {
sr[i].name = "stschg";
sr[i].flags = IORESOURCE_IRQ;
sr[i].start = sr[i].end = stschg_irq;
i++;
}
if (eject_irq) {
sr[i].name = "eject";
sr[i].flags = IORESOURCE_IRQ;
sr[i].start = sr[i].end = eject_irq;
}
pd->resource = sr;
pd->num_resources = cnt;
ret = platform_device_add(pd);
if (!ret)
return 0;
platform_device_put(pd);
out:
kfree(sr);
return ret;
}
#define YAMON_SIZE 0x00100000
#define YAMON_ENV_SIZE 0x00040000
int __init db1x_register_norflash(unsigned long size, int width,
int swapped)
{
struct physmap_flash_data *pfd;
struct platform_device *pd;
struct mtd_partition *parts;
struct resource *res;
int ret, i;
if (size < (8 * 1024 * 1024))
return -EINVAL;
ret = -ENOMEM;
parts = kzalloc(sizeof(struct mtd_partition) * 5, GFP_KERNEL);
if (!parts)
goto out;
res = kzalloc(sizeof(struct resource), GFP_KERNEL);
if (!res)
goto out1;
pfd = kzalloc(sizeof(struct physmap_flash_data), GFP_KERNEL);
if (!pfd)
goto out2;
pd = platform_device_alloc("physmap-flash", 0);
if (!pd)
goto out3;
/* NOR flash ends at 0x20000000, regardless of size */
res->start = 0x20000000 - size;
res->end = 0x20000000 - 1;
res->flags = IORESOURCE_MEM;
/* partition setup. Most Develboards have a switch which allows
* to swap the physical locations of the 2 NOR flash banks.
*/
i = 0;
if (!swapped) {
/* first NOR chip */
parts[i].offset = 0;
parts[i].name = "User FS";
parts[i].size = size / 2;
i++;
}
parts[i].offset = MTDPART_OFS_APPEND;
parts[i].name = "User FS 2";
parts[i].size = (size / 2) - (0x20000000 - 0x1fc00000);
i++;
parts[i].offset = MTDPART_OFS_APPEND;
parts[i].name = "YAMON";
parts[i].size = YAMON_SIZE;
parts[i].mask_flags = MTD_WRITEABLE;
i++;
parts[i].offset = MTDPART_OFS_APPEND;
parts[i].name = "raw kernel";
parts[i].size = 0x00400000 - YAMON_SIZE - YAMON_ENV_SIZE;
i++;
parts[i].offset = MTDPART_OFS_APPEND;
parts[i].name = "YAMON Env";
parts[i].size = YAMON_ENV_SIZE;
parts[i].mask_flags = MTD_WRITEABLE;
i++;
if (swapped) {
parts[i].offset = MTDPART_OFS_APPEND;
parts[i].name = "User FS";
parts[i].size = size / 2;
i++;
}
pfd->width = width;
pfd->parts = parts;
pfd->nr_parts = 5;
pd->dev.platform_data = pfd;
pd->resource = res;
pd->num_resources = 1;
ret = platform_device_add(pd);
if (!ret)
return ret;
platform_device_put(pd);
out3:
kfree(pfd);
out2:
kfree(res);
out1:
kfree(parts);
out:
return ret;
}
arch/mips/alchemy/devboards/platform.h 0 → 100644
View file @ f1dd6ad5
#ifndef _DEVBOARD_PLATFORM_H_
#define _DEVBOARD_PLATFORM_H_
#include <linux/init.h>
int __init db1x_register_pcmcia_socket(phys_addr_t pcmcia_attr_start,
phys_addr_t pcmcia_attr_len,
phys_addr_t pcmcia_mem_start,
phys_addr_t pcmcia_mem_end,
phys_addr_t pcmcia_io_start,
phys_addr_t pcmcia_io_end,
int card_irq,
int cd_irq,
int stschg_irq,
int eject_irq,
int id);
int __init db1x_register_norflash(unsigned long size, int width,
int swapped);
#endif
arch/mips/alchemy/devboards/pm.c
View file @ f1dd6ad5
......@@ -10,6 +10,7 @@
#include <linux/sysfs.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/gpio.h>
#include <asm/mach-db1x00/bcsr.h>
/*
* Generic suspend userspace interface for Alchemy development boards.
......@@ -26,6 +27,20 @@ static unsigned long db1x_pm_last_wakesrc;
static int db1x_pm_enter(suspend_state_t state)
{
unsigned short bcsrs[16];
int i, j, hasint;
/* save CPLD regs */
hasint = bcsr_read(BCSR_WHOAMI);
hasint = BCSR_WHOAMI_BOARD(hasint) >= BCSR_WHOAMI_DB1200;
j = (hasint) ? BCSR_MASKSET : BCSR_SYSTEM;
for (i = BCSR_STATUS; i <= j; i++)
bcsrs[i] = bcsr_read(i);
/* shut off hexleds */
bcsr_write(BCSR_HEXCLEAR, 3);
/* enable GPIO based wakeup */
alchemy_gpio1_input_enable();
......@@ -52,6 +67,23 @@ static int db1x_pm_enter(suspend_state_t state)
/* ...and now the sandman can come! */
au_sleep();
/* restore CPLD regs */
for (i = BCSR_STATUS; i <= BCSR_SYSTEM; i++)
bcsr_write(i, bcsrs[i]);
/* restore CPLD int registers */
if (hasint) {
bcsr_write(BCSR_INTCLR, 0xffff);
bcsr_write(BCSR_MASKCLR, 0xffff);
bcsr_write(BCSR_INTSTAT, 0xffff);
bcsr_write(BCSR_INTSET, bcsrs[BCSR_INTSET]);
bcsr_write(BCSR_MASKSET, bcsrs[BCSR_MASKSET]);
}
/* light up hexleds */
bcsr_write(BCSR_HEXCLEAR, 0);
return 0;
}
......
arch/mips/alchemy/devboards/prom.c
View file @ f1dd6ad5
......@@ -60,3 +60,8 @@ void __init prom_init(void)
strict_strtoul(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
void prom_putchar(unsigned char c)
{
alchemy_uart_putchar(UART0_PHYS_ADDR, c);
}
arch/mips/alchemy/mtx-1/Makefile
View file @ f1dd6ad5
......@@ -6,7 +6,7 @@
# Makefile for 4G Systems MTX-1 board.
#
lib-y := init.o board_setup.o irqmap.o
lib-y := init.o board_setup.o
obj-y := platform.o
EXTRA_CFLAGS += -Werror
arch/mips/alchemy/mtx-1/board_setup.c
View file @ f1dd6ad5
......@@ -30,32 +30,43 @@
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pm.h>
#include <asm/reboot.h>
#include <asm/mach-au1x00/au1000.h>
#include <prom.h>
char irq_tab_alchemy[][5] __initdata = {
[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
[1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
[2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
[3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
[4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
[5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
[6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
[7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
};
extern int (*board_pci_idsel)(unsigned int devsel, int assert);
int mtx1_pci_idsel(unsigned int devsel, int assert);
void board_reset(void)
static void mtx1_reset(char *c)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
au_writel(0x00000000, 0xAE00001C);
}
void __init board_setup(void)
static void mtx1_power_off(void)
{
#ifdef CONFIG_SERIAL_8250_CONSOLE
char *argptr;
argptr = prom_getcmdline();
argptr = strstr(argptr, "console=");
if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
printk(KERN_ALERT "It's now safe to remove power\n");
while (1)
asm volatile (".set mips3 ; wait ; .set mips1");
}
void __init board_setup(void)
{
alchemy_gpio2_enable();
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
......@@ -86,6 +97,10 @@ void __init board_setup(void)
alchemy_gpio_direction_output(211, 1); /* green on */
alchemy_gpio_direction_output(212, 0); /* red off */
pm_power_off = mtx1_power_off;
_machine_halt = mtx1_power_off;
_machine_restart = mtx1_reset;
printk(KERN_INFO "4G Systems MTX-1 Board\n");
}
......@@ -109,3 +124,15 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
au_sync_udelay(1);
return 1;
}
static int __init mtx1_init_irq(void)
{
set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
return 0;
}
arch_initcall(mtx1_init_irq);
arch/mips/alchemy/mtx-1/init.c
View file @ f1dd6ad5
......@@ -32,6 +32,7 @@
#include <linux/init.h>
#include <asm/bootinfo.h>
#include <asm/mach-au1x00/au1000.h>
#include <prom.h>
......@@ -58,3 +59,8 @@ void __init prom_init(void)
strict_strtoul(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
void prom_putchar(unsigned char c)
{
alchemy_uart_putchar(UART0_PHYS_ADDR, c);
}
arch/mips/alchemy/mtx-1/irqmap.c deleted 100644 → 0
View file @ 8d37a371
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx irq map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
[0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
[1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
[2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
[3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
[4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
[5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
[6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
[7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
};
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
arch/mips/alchemy/xxs1500/Makefile
View file @ f1dd6ad5
......@@ -5,4 +5,6 @@
# Makefile for MyCable XXS1500 board.
#
lib-y := init.o board_setup.o irqmap.o
lib-y := init.o board_setup.o platform.o
EXTRA_CFLAGS += -Werror
arch/mips/alchemy/xxs1500/board_setup.c
View file @ f1dd6ad5
......@@ -25,31 +25,35 @@
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <asm/reboot.h>
#include <asm/mach-au1x00/au1000.h>
#include <prom.h>
void board_reset(void)
static void xxs1500_reset(char *c)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
au_writel(0x00000000, 0xAE00001C);
}
static void xxs1500_power_off(void)
{
printk(KERN_ALERT "It's now safe to remove power\n");
while (1)
asm volatile (".set mips3 ; wait ; .set mips1");
}
void __init board_setup(void)
{
u32 pin_func;
#ifdef CONFIG_SERIAL_8250_CONSOLE
char *argptr;
argptr = prom_getcmdline();
argptr = strstr(argptr, "console=");
if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
pm_power_off = xxs1500_power_off;
_machine_halt = xxs1500_power_off;
_machine_restart = xxs1500_reset;
alchemy_gpio1_input_enable();
alchemy_gpio2_enable();
......@@ -68,22 +72,6 @@ void __init board_setup(void)
/* Enable DTR = USB power up */
au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */
#ifdef CONFIG_PCMCIA_XXS1500
/* GPIO 0, 1, and 4 are inputs */
alchemy_gpio_direction_input(0);
alchemy_gpio_direction_input(1);
alchemy_gpio_direction_input(4);
/* GPIO2 208/9/10/11 are inputs */
alchemy_gpio_direction_input(208);
alchemy_gpio_direction_input(209);
alchemy_gpio_direction_input(210);
alchemy_gpio_direction_input(211);
/* Turn off power */
alchemy_gpio_direction_output(214, 0);
#endif
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)
au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
......@@ -92,3 +80,23 @@ void __init board_setup(void)
#endif
#endif
}
static int __init xxs1500_init_irq(void)
{
set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO207_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* CF irq */
set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW);
return 0;
}
arch_initcall(xxs1500_init_irq);
arch/mips/alchemy/xxs1500/init.c
View file @ f1dd6ad5
......@@ -30,6 +30,7 @@
#include <linux/kernel.h>
#include <asm/bootinfo.h>
#include <asm/mach-au1x00/au1000.h>
#include <prom.h>
......@@ -56,3 +57,8 @@ void __init prom_init(void)
strict_strtoul(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
void prom_putchar(unsigned char c)
{
alchemy_uart_putchar(UART0_PHYS_ADDR, c);
}
arch/mips/alchemy/xxs1500/irqmap.c deleted 100644 → 0
View file @ 8d37a371
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx irq map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_207, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* CF interrupt */
{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 },
};
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
arch/mips/alchemy/xxs1500/platform.c 0 → 100644
View file @ f1dd6ad5
/*
* XXS1500 board platform device registration
*
* Copyright (C) 2009 Manuel Lauss
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1000.h>
static struct resource xxs1500_pcmcia_res[] = {
{
.name = "pcmcia-io",
.flags = IORESOURCE_MEM,
.start = PCMCIA_IO_PHYS_ADDR,
.end = PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
},
{
.name = "pcmcia-attr",
.flags = IORESOURCE_MEM,
.start = PCMCIA_ATTR_PHYS_ADDR,
.end = PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
},
{
.name = "pcmcia-mem",
.flags = IORESOURCE_MEM,
.start = PCMCIA_MEM_PHYS_ADDR,
.end = PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
},
};
static struct platform_device xxs1500_pcmcia_dev = {
.name = "xxs1500_pcmcia",
.id = -1,
.num_resources = ARRAY_SIZE(xxs1500_pcmcia_res),
.resource = xxs1500_pcmcia_res,
};
static struct platform_device *xxs1500_devs[] __initdata = {
&xxs1500_pcmcia_dev,
};
static int __init xxs1500_dev_init(void)
{
return platform_add_devices(xxs1500_devs,
ARRAY_SIZE(xxs1500_devs));
}
device_initcall(xxs1500_dev_init);
arch/mips/ar7/clock.c
View file @ f1dd6ad5
/*
* Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
* Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -24,6 +25,8 @@
#include <linux/delay.h>
#include <linux/gcd.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <asm/addrspace.h>
#include <asm/mach-ar7/ar7.h>
......@@ -94,12 +97,16 @@ struct tnetd7200_clocks {
struct tnetd7200_clock usb;
};
int ar7_cpu_clock = 150000000;
EXPORT_SYMBOL(ar7_cpu_clock);
int ar7_bus_clock = 125000000;
EXPORT_SYMBOL(ar7_bus_clock);
int ar7_dsp_clock;
EXPORT_SYMBOL(ar7_dsp_clock);
static struct clk bus_clk = {
.rate = 125000000,
};
static struct clk cpu_clk = {
.rate = 150000000,
};
static struct clk dsp_clk;
static struct clk vbus_clk;
static void approximate(int base, int target, int *prediv,
int *postdiv, int *mul)
......@@ -185,7 +192,7 @@ static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock,
base_clock = AR7_XTAL_CLOCK;
break;
case BOOT_PLL_SOURCE_CPU:
base_clock = ar7_cpu_clock;
base_clock = cpu_clk.rate;
break;
}
......@@ -212,11 +219,11 @@ static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
u32 *bootcr, u32 frequency)
{
int prediv, postdiv, mul;
int base_clock = ar7_bus_clock;
int base_clock = bus_clk.rate;
switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
case BOOT_PLL_SOURCE_BUS:
base_clock = ar7_bus_clock;
base_clock = bus_clk.rate;
break;
case BOOT_PLL_SOURCE_REF:
base_clock = AR7_REF_CLOCK;
......@@ -225,7 +232,7 @@ static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
base_clock = AR7_XTAL_CLOCK;
break;
case BOOT_PLL_SOURCE_CPU:
base_clock = ar7_cpu_clock;
base_clock = cpu_clk.rate;
break;
}
......@@ -247,18 +254,18 @@ static void __init tnetd7300_init_clocks(void)
ioremap_nocache(UR8_REGS_CLOCKS,
sizeof(struct tnetd7300_clocks));
ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
bus_clk.rate = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
&clocks->bus, bootcr, AR7_AFE_CLOCK);
if (*bootcr & BOOT_PLL_ASYNC_MODE)
ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
cpu_clk.rate = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
&clocks->cpu, bootcr, AR7_AFE_CLOCK);
else
ar7_cpu_clock = ar7_bus_clock;
cpu_clk.rate = bus_clk.rate;
if (ar7_dsp_clock == 250000000)
if (dsp_clk.rate == 250000000)
tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp,
bootcr, ar7_dsp_clock);
bootcr, dsp_clk.rate);
iounmap(clocks);
iounmap(bootcr);
......@@ -343,20 +350,20 @@ static void __init tnetd7200_init_clocks(void)
printk(KERN_INFO "Clocks: Setting DSP clock\n");
calculate(dsp_base, TNETD7200_DEF_DSP_CLK,
&dsp_prediv, &dsp_postdiv, &dsp_mul);
ar7_bus_clock =
bus_clk.rate =
((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv;
tnetd7200_set_clock(dsp_base, &clocks->dsp,
dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2,
ar7_bus_clock);
bus_clk.rate);
printk(KERN_INFO "Clocks: Setting CPU clock\n");
calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
&cpu_postdiv, &cpu_mul);
ar7_cpu_clock =
cpu_clk.rate =
((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv;
tnetd7200_set_clock(cpu_base, &clocks->cpu,
cpu_prediv, cpu_postdiv, -1, cpu_mul,
ar7_cpu_clock);
cpu_clk.rate);
} else
if (*bootcr & BOOT_PLL_2TO1_MODE) {
......@@ -365,48 +372,90 @@ static void __init tnetd7200_init_clocks(void)
printk(KERN_INFO "Clocks: Setting CPU clock\n");
calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
&cpu_postdiv, &cpu_mul);
ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul)
cpu_clk.rate = ((cpu_base / cpu_prediv) * cpu_mul)
/ cpu_postdiv;
tnetd7200_set_clock(cpu_base, &clocks->cpu,
cpu_prediv, cpu_postdiv, -1, cpu_mul,
ar7_cpu_clock);
cpu_clk.rate);
printk(KERN_INFO "Clocks: Setting DSP clock\n");
calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
&dsp_postdiv, &dsp_mul);
ar7_bus_clock = ar7_cpu_clock / 2;
bus_clk.rate = cpu_clk.rate / 2;
tnetd7200_set_clock(dsp_base, &clocks->dsp,
dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
dsp_mul * 2, ar7_bus_clock);
dsp_mul * 2, bus_clk.rate);
} else {
printk(KERN_INFO "Clocks: Sync 1:1 mode\n");
printk(KERN_INFO "Clocks: Setting DSP clock\n");
calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
&dsp_postdiv, &dsp_mul);
ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul)
bus_clk.rate = ((dsp_base / dsp_prediv) * dsp_mul)
/ dsp_postdiv;
tnetd7200_set_clock(dsp_base, &clocks->dsp,
dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
dsp_mul * 2, ar7_bus_clock);
dsp_mul * 2, bus_clk.rate);
ar7_cpu_clock = ar7_bus_clock;
cpu_clk.rate = bus_clk.rate;
}
printk(KERN_INFO "Clocks: Setting USB clock\n");
usb_base = ar7_bus_clock;
usb_base = bus_clk.rate;
calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv,
&usb_postdiv, &usb_mul);
tnetd7200_set_clock(usb_base, &clocks->usb,
usb_prediv, usb_postdiv, -1, usb_mul,
TNETD7200_DEF_USB_CLK);
ar7_dsp_clock = ar7_cpu_clock;
dsp_clk.rate = cpu_clk.rate;
iounmap(clocks);
iounmap(bootcr);
}
/*
* Linux clock API
*/
int clk_enable(struct clk *clk)
{
return 0;
}
EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
{
return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
struct clk *clk_get(struct device *dev, const char *id)
{
if (!strcmp(id, "bus"))
return &bus_clk;
/* cpmac and vbus share the same rate */
if (!strcmp(id, "cpmac"))
return &vbus_clk;
if (!strcmp(id, "cpu"))
return &cpu_clk;
if (!strcmp(id, "dsp"));
return &dsp_clk;
if (!strcmp(id, "vbus"))
return &vbus_clk;
return ERR_PTR(-ENOENT);
}
EXPORT_SYMBOL(clk_get);
void clk_put(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_put);
int __init ar7_init_clocks(void)
{
switch (ar7_chip_id()) {
......@@ -415,12 +464,14 @@ int __init ar7_init_clocks(void)
tnetd7200_init_clocks();
break;
case AR7_CHIP_7300:
ar7_dsp_clock = tnetd7300_dsp_clock();
dsp_clk.rate = tnetd7300_dsp_clock();
tnetd7300_init_clocks();
break;
default:
break;
}
/* adjust vbus clock rate */
vbus_clk.rate = bus_clk.rate / 2;
return 0;
}
......
arch/mips/ar7/gpio.c
View file @ f1dd6ad5
/*
* Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
* Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -18,31 +19,113 @@
*/
#include <linux/module.h>
#include <linux/gpio.h>
#include <asm/mach-ar7/gpio.h>
static const char *ar7_gpio_list[AR7_GPIO_MAX];
struct ar7_gpio_chip {
void __iomem *regs;
struct gpio_chip chip;
};
int gpio_request(unsigned gpio, const char *label)
static int ar7_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
{
if (gpio >= AR7_GPIO_MAX)
return -EINVAL;
struct ar7_gpio_chip *gpch =
container_of(chip, struct ar7_gpio_chip, chip);
void __iomem *gpio_in = gpch->regs + AR7_GPIO_INPUT;
if (ar7_gpio_list[gpio])
return -EBUSY;
return readl(gpio_in) & (1 << gpio);
}
static void ar7_gpio_set_value(struct gpio_chip *chip,
unsigned gpio, int value)
{
struct ar7_gpio_chip *gpch =
container_of(chip, struct ar7_gpio_chip, chip);
void __iomem *gpio_out = gpch->regs + AR7_GPIO_OUTPUT;
unsigned tmp;
tmp = readl(gpio_out) & ~(1 << gpio);
if (value)
tmp |= 1 << gpio;
writel(tmp, gpio_out);
}
static int ar7_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
{
struct ar7_gpio_chip *gpch =
container_of(chip, struct ar7_gpio_chip, chip);
void __iomem *gpio_dir = gpch->regs + AR7_GPIO_DIR;
if (label)
ar7_gpio_list[gpio] = label;
else
ar7_gpio_list[gpio] = "busy";
writel(readl(gpio_dir) | (1 << gpio), gpio_dir);
return 0;
}
EXPORT_SYMBOL(gpio_request);
void gpio_free(unsigned gpio)
static int ar7_gpio_direction_output(struct gpio_chip *chip,
unsigned gpio, int value)
{
BUG_ON(!ar7_gpio_list[gpio]);
ar7_gpio_list[gpio] = NULL;
struct ar7_gpio_chip *gpch =
container_of(chip, struct ar7_gpio_chip, chip);
void __iomem *gpio_dir = gpch->regs + AR7_GPIO_DIR;
ar7_gpio_set_value(chip, gpio, value);
writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir);
return 0;
}
static struct ar7_gpio_chip ar7_gpio_chip = {
.chip = {
.label = "ar7-gpio",
.direction_input = ar7_gpio_direction_input,
.direction_output = ar7_gpio_direction_output,
.set = ar7_gpio_set_value,
.get = ar7_gpio_get_value,
.base = 0,
.ngpio = AR7_GPIO_MAX,
}
};
int ar7_gpio_enable(unsigned gpio)
{
void __iomem *gpio_en = ar7_gpio_chip.regs + AR7_GPIO_ENABLE;
writel(readl(gpio_en) | (1 << gpio), gpio_en);
return 0;
}
EXPORT_SYMBOL(ar7_gpio_enable);
int ar7_gpio_disable(unsigned gpio)
{
void __iomem *gpio_en = ar7_gpio_chip.regs + AR7_GPIO_ENABLE;
writel(readl(gpio_en) & ~(1 << gpio), gpio_en);
return 0;
}
EXPORT_SYMBOL(ar7_gpio_disable);
static int __init ar7_gpio_init(void)
{
int ret;
ar7_gpio_chip.regs = ioremap_nocache(AR7_REGS_GPIO,
AR7_REGS_GPIO + 0x10);
if (!ar7_gpio_chip.regs) {
printk(KERN_ERR "ar7-gpio: failed to ioremap regs\n");
return -ENOMEM;
}
ret = gpiochip_add(&ar7_gpio_chip.chip);
if (ret) {
printk(KERN_ERR "ar7-gpio: failed to add gpiochip\n");
return ret;
}
printk(KERN_INFO "ar7-gpio: registered %d GPIOs\n",
ar7_gpio_chip.chip.ngpio);
return ret;
}
EXPORT_SYMBOL(gpio_free);
arch_initcall(ar7_gpio_init);
arch/mips/ar7/memory.c
View file @ f1dd6ad5
......@@ -62,8 +62,7 @@ void __init prom_meminit(void)
unsigned long pages;
pages = memsize() >> PAGE_SHIFT;
add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT,
BOOT_MEM_RAM);
add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT, BOOT_MEM_RAM);
}
void __init prom_free_prom_memory(void)
......
arch/mips/ar7/platform.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/ar7/prom.c
View file @ f1dd6ad5
......@@ -41,6 +41,7 @@ static struct env_var adam2_env[MAX_ENTRY];
char *prom_getenv(const char *name)
{
int i;
for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++)
if (!strcmp(name, adam2_env[i].name))
return adam2_env[i].value;
......@@ -49,29 +50,14 @@ char *prom_getenv(const char *name)
}
EXPORT_SYMBOL(prom_getenv);
char * __init prom_getcmdline(void)
{
return &(arcs_cmdline[0]);
}
static void __init ar7_init_cmdline(int argc, char *argv[])
{
char *cp;
int actr;
actr = 1; /* Always ignore argv[0] */
int i;
cp = &(arcs_cmdline[0]);
while (actr < argc) {
strcpy(cp, argv[actr]);
cp += strlen(argv[actr]);
*cp++ = ' ';
actr++;
}
if (cp != &(arcs_cmdline[0])) {
/* get rid of trailing space */
--cp;
*cp = '\0';
for (i = 1; i < argc; i++) {
strlcat(arcs_cmdline, argv[i], COMMAND_LINE_SIZE);
if (i < (argc - 1))
strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
}
}
......@@ -154,6 +140,7 @@ static char * __init lookup_psp_var_map(u8 num)
static void __init add_adam2_var(char *name, char *value)
{
int i;
for (i = 0; i < MAX_ENTRY; i++) {
if (!adam2_env[i].name) {
adam2_env[i].name = name;
......@@ -216,7 +203,7 @@ static void __init console_config(void)
char parity = '\0', bits = '\0', flow = '\0';
char *s, *p;
if (strstr(prom_getcmdline(), "console="))
if (strstr(arcs_cmdline, "console="))
return;
s = prom_getenv("modetty0");
......@@ -250,7 +237,7 @@ static void __init console_config(void)
else
sprintf(console_string, " console=ttyS0,%d%c%c", baud, parity,
bits);
strcat(prom_getcmdline(), console_string);
strlcat(arcs_cmdline, console_string, COMMAND_LINE_SIZE);
#endif
}
......@@ -279,4 +266,3 @@ int prom_putchar(char c)
serial_out(UART_TX, c);
return 1;
}
arch/mips/ar7/setup.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/ar7/time.c
View file @ f1dd6ad5
......@@ -20,11 +20,21 @@
#include <linux/init.h>
#include <linux/time.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <asm/time.h>
#include <asm/mach-ar7/ar7.h>
void __init plat_time_init(void)
{
mips_hpt_frequency = ar7_cpu_freq() / 2;
struct clk *cpu_clk;
cpu_clk = clk_get(NULL, "cpu");
if (IS_ERR(cpu_clk)) {
printk(KERN_ERR "unable to get cpu clock\n");
return;
}
mips_hpt_frequency = clk_get_rate(cpu_clk) / 2;
}
arch/mips/bcm47xx/gpio.c
View file @ f1dd6ad5
......@@ -59,4 +59,3 @@ int gpio_to_irq(unsigned gpio)
return -EINVAL;
}
EXPORT_SYMBOL_GPL(gpio_to_irq);
arch/mips/bcm47xx/prom.c
View file @ f1dd6ad5
......@@ -163,4 +163,3 @@ void __init prom_init(void)
void __init prom_free_prom_memory(void)
{
}
arch/mips/bcm47xx/setup.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/bcm47xx/wgt634u.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/bcm63xx/boards/board_bcm963xx.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/bcm63xx/timer.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/boot/compressed/Makefile
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/boot/compressed/dbg.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/boot/compressed/decompress.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/boot/compressed/uart-alchemy.c 0 → 100644
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/cavium-octeon/dma-octeon.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/cavium-octeon/octeon-irq.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/cavium-octeon/octeon-platform.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/cavium-octeon/smp.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/cobalt/pci.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/configs/db1000_defconfig
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/configs/db1100_defconfig
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/configs/db1200_defconfig
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/configs/db1500_defconfig
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/configs/db1550_defconfig
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/configs/lemote2f_defconfig
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/configs/pb1100_defconfig
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/configs/pb1200_defconfig 0 → 100644
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/configs/pb1500_defconfig
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/configs/pb1550_defconfig
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/dec/kn01-berr.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/dec/prom/locore.S
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/atomic.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/barrier.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/bitops.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/cmpxchg.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/cpu-features.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/cpu.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/current.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/dec/kn01.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/device.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/elf.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/ftrace.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/i8259.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/io.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/mach-ar7/ar7.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/mach-ar7/gpio.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/mach-au1x00/au1000.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/mach-au1x00/au1xxx_eth.h 0 → 100644
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/mach-au1x00/gpio.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/mach-au1x00/ioremap.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/mach-au1x00/prom.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/mach-db1x00/bcsr.h 0 → 100644
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/mach-db1x00/db1200.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/mach-db1x00/db1x00.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/mach-loongson/mem.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/mach-loongson/pci.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/mach-pb1x00/pb1100.h deleted 100644 → 0
View file @ 8d37a371
This diff is collapsed.
arch/mips/include/asm/mach-pb1x00/pb1200.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/mach-pb1x00/pb1500.h deleted 100644 → 0
View file @ 8d37a371
This diff is collapsed.
arch/mips/include/asm/mach-pb1x00/pb1550.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/mipsregs.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/msc01_ic.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/nile4.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/octeon/octeon.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/page.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/param.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/parport.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/pgalloc.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/pgtable-32.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/pgtable-64.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/pgtable-bits.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/pgtable.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/serial.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/sgialib.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/sibyte/bigsur.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/sibyte/sb1250_ldt.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/sn/klkernvars.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/sparsemem.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/spinlock.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/spinlock_types.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/system.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/txx9/generic.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/include/asm/ucontext.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/jazz/irq.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/kernel/Makefile
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/kernel/asm-offsets.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/kernel/cevt-gt641xx.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/kernel/cpu-probe.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/kernel/ftrace.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/kernel/i8259.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/kernel/irq-gt641xx.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/kernel/linux32.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/kernel/mcount.S
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/kernel/octeon_switch.S
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/kernel/rtlx.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/kernel/spinlock_test.c 0 → 100644
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/kernel/traps.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/kernel/vpe.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/lasat/picvue.h
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/common/cmdline.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/common/early_printk.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/common/env.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/common/init.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/common/machtype.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/common/mem.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/common/platform.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/common/pm.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/common/reset.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/common/serial.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/common/time.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/common/uart_base.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/fuloong-2e/reset.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/lemote-2f/Makefile
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/lemote-2f/ec_kb3310b.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/lemote-2f/irq.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/lemote-2f/machtype.c 0 → 100644
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/lemote-2f/pm.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/loongson/lemote-2f/reset.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/math-emu/ieee754d.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/math-emu/ieee754dp.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/math-emu/ieee754sp.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/math-emu/ieee754xcpt.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/mm/c-octeon.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/mm/cache.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/mm/fault.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/mm/hugetlbpage.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/mm/init.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/mm/page.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/mm/pgtable-64.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/mm/tlb-r4k.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/mm/tlbex.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/mm/uasm.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/mti-malta/malta-int.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/nxp/pnx833x/common/interrupts.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/nxp/pnx833x/common/prom.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/nxp/pnx8550/common/prom.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/oprofile/common.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/oprofile/op_model_loongson2.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/pci/fixup-cobalt.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/pci/fixup-lemote2f.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/pci/ops-loongson2.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/pci/ops-pmcmsp.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/pci/pci-bcm47xx.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/pci/pci-octeon.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/pci/pci.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/pmc-sierra/msp71xx/msp_prom.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/pmc-sierra/yosemite/smp.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/power/cpu.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/power/hibernate.S
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/powertv/asic/asic_devices.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/powertv/asic/asic_int.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/powertv/powertv_setup.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/sgi-ip27/ip27-klnuma.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/sgi-ip27/ip27-nmi.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/sgi-ip32/ip32-irq.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/sibyte/bcm1480/irq.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/sibyte/common/sb_tbprof.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/sibyte/sb1250/irq.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/sni/rm200.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/txx9/generic/setup.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/txx9/jmr3927/setup.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/txx9/rbtx4927/setup.c
View file @ f1dd6ad5
This diff is collapsed.
arch/mips/txx9/rbtx4938/setup.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/i2c/busses/Kconfig
View file @ f1dd6ad5
This diff is collapsed.
drivers/i2c/busses/Makefile
View file @ f1dd6ad5
This diff is collapsed.
drivers/i2c/busses/i2c-octeon.c 0 → 100644
View file @ f1dd6ad5
This diff is collapsed.
drivers/ide/au1xxx-ide.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/mmc/host/au1xmmc.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/mtd/maps/Kconfig
View file @ f1dd6ad5
This diff is collapsed.
drivers/mtd/maps/Makefile
View file @ f1dd6ad5
This diff is collapsed.
drivers/mtd/maps/alchemy-flash.c deleted 100644 → 0
View file @ 8d37a371
This diff is collapsed.
drivers/mtd/nand/au1550nd.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/net/au1000_eth.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/net/au1000_eth.h
View file @ f1dd6ad5
This diff is collapsed.
drivers/net/cpmac.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/net/irda/au1k_ir.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/pcmcia/Kconfig
View file @ f1dd6ad5
This diff is collapsed.
drivers/pcmcia/Makefile
View file @ f1dd6ad5
This diff is collapsed.
drivers/pcmcia/au1000_db1x00.c deleted 100644 → 0
View file @ 8d37a371
This diff is collapsed.
drivers/pcmcia/au1000_generic.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/pcmcia/au1000_generic.h
View file @ f1dd6ad5
This diff is collapsed.
drivers/pcmcia/au1000_pb1x00.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/pcmcia/au1000_xxs1500.c deleted 100644 → 0
View file @ 8d37a371
This diff is collapsed.
drivers/pcmcia/db1xxx_ss.c 0 → 100644
View file @ f1dd6ad5
This diff is collapsed.
drivers/pcmcia/xxs1500_ss.c 0 → 100644
View file @ f1dd6ad5
This diff is collapsed.
drivers/serial/8250.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/spi/au1550_spi.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/octeon/Makefile
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/octeon/ethernet-defines.h
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/octeon/ethernet-mdio.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/octeon/ethernet-mdio.h
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/octeon/ethernet-mem.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/octeon/ethernet-proc.c deleted 100644 → 0
View file @ 8d37a371
This diff is collapsed.
drivers/staging/octeon/ethernet-proc.h deleted 100644 → 0
View file @ 8d37a371
This diff is collapsed.
drivers/staging/octeon/ethernet-rgmii.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/octeon/ethernet-rx.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/octeon/ethernet-rx.h
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/octeon/ethernet-sgmii.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/octeon/ethernet-spi.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/octeon/ethernet-tx.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/octeon/ethernet-tx.h
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/octeon/ethernet-util.h
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/octeon/ethernet-xaui.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/octeon/ethernet.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/octeon/octeon-ethernet.h
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/sm7xx/smtc2d.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/sm7xx/smtc2d.h
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/sm7xx/smtcfb.c
View file @ f1dd6ad5
This diff is collapsed.
drivers/staging/sm7xx/smtcfb.h
View file @ f1dd6ad5
This diff is collapsed.
drivers/watchdog/ar7_wdt.c
View file @ f1dd6ad5
This diff is collapsed.
sound/oss/au1550_ac97.c
View file @ f1dd6ad5
This diff is collapsed.
sound/soc/au1x/Kconfig
View file @ f1dd6ad5
This diff is collapsed.
sound/soc/au1x/Makefile
View file @ f1dd6ad5
This diff is collapsed.
sound/soc/au1x/db1200.c 0 → 100644
View file @ f1dd6ad5
This diff is collapsed.
sound/soc/au1x/dbdma2.c
View file @ f1dd6ad5
This diff is collapsed.
sound/soc/au1x/sample-ac97.c deleted 100644 → 0
View file @ 8d37a371
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7