Commit f31000e5 authored by Jim Cromie's avatar Jim Cromie Committed by Linus Torvalds

[PATCH] chardev: GPIO for SCx200 & PC-8736x: use dev_dbg in common module

Use of dev_dbg() and friends is considered good practice.  dev_dbg() needs a
struct device *devp, but nsc_gpio is only a helper module, so it doesnt
have/need its own.  To provide devp to the user-modules (scx200 & pc8736x
_gpio), we add it to the vtable, and set it during init.

Also squeeze nsc_gpio_dump()'s format a little.

[  199.259879]  pc8736x_gpio.0: io09: 0x0044 TS OD PUE  EDGE LO DEBOUNCE
Signed-off-by: default avatarJim Cromie <jim.cromie@gmail.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 58b087cd
......@@ -14,15 +14,20 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/nsc_gpio.h>
#include <linux/platform_device.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#define NAME "nsc_gpio"
void nsc_gpio_dump(unsigned index, u32 config)
void nsc_gpio_dump(struct nsc_gpio_ops *amp, unsigned index)
{
printk(KERN_INFO NAME ": GPIO-%02u: 0x%08lx %s %s %s %s %s %s %s\n",
index, (unsigned long)config,
/* retrieve current config w/o changing it */
u32 config = amp->gpio_config(index, ~0, 0);
/* user requested via 'v' command, so its INFO */
dev_info(amp->dev, "io%02u: 0x%04x %s %s %s %s %s %s %s\n",
index, config,
(config & 1) ? "OE" : "TS", /* output-enabled/tristate */
(config & 2) ? "PP" : "OD", /* push pull / open drain */
(config & 4) ? "PUE" : "PUD", /* pull up enabled/disabled */
......@@ -37,6 +42,7 @@ ssize_t nsc_gpio_write(struct file *file, const char __user *data,
{
unsigned m = iminor(file->f_dentry->d_inode);
struct nsc_gpio_ops *amp = file->private_data;
struct device *dev = amp->dev;
size_t i;
int err = 0;
......@@ -52,42 +58,41 @@ ssize_t nsc_gpio_write(struct file *file, const char __user *data,
amp->gpio_set(m, 1);
break;
case 'O':
printk(KERN_INFO NAME ": GPIO%d output enabled\n", m);
dev_dbg(dev, "GPIO%d output enabled\n", m);
amp->gpio_config(m, ~1, 1);
break;
case 'o':
printk(KERN_INFO NAME ": GPIO%d output disabled\n", m);
dev_dbg(dev, "GPIO%d output disabled\n", m);
amp->gpio_config(m, ~1, 0);
break;
case 'T':
printk(KERN_INFO NAME ": GPIO%d output is push pull\n",
dev_dbg(dev, "GPIO%d output is push pull\n",
m);
amp->gpio_config(m, ~2, 2);
break;
case 't':
printk(KERN_INFO NAME ": GPIO%d output is open drain\n",
dev_dbg(dev, "GPIO%d output is open drain\n",
m);
amp->gpio_config(m, ~2, 0);
break;
case 'P':
printk(KERN_INFO NAME ": GPIO%d pull up enabled\n", m);
dev_dbg(dev, "GPIO%d pull up enabled\n", m);
amp->gpio_config(m, ~4, 4);
break;
case 'p':
printk(KERN_INFO NAME ": GPIO%d pull up disabled\n", m);
dev_dbg(dev, "GPIO%d pull up disabled\n", m);
amp->gpio_config(m, ~4, 0);
break;
case 'v':
/* View Current pin settings */
amp->gpio_dump(m);
amp->gpio_dump(amp, m);
break;
case '\n':
/* end of settings string, do nothing */
break;
default:
printk(KERN_ERR NAME
": GPIO-%2d bad setting: chr<0x%2x>\n", m,
(int)c);
dev_err(dev, "io%2d bad setting: chr<0x%2x>\n",
m, (int)c);
err++;
}
}
......
......@@ -207,8 +207,6 @@ static void pc8736x_gpio_change(unsigned index)
pc8736x_gpio_set(index, !pc8736x_gpio_get(index));
}
extern void nsc_gpio_dump(unsigned iminor);
static struct nsc_gpio_ops pc8736x_access = {
.owner = THIS_MODULE,
.gpio_config = pc8736x_gpio_configure,
......@@ -260,6 +258,7 @@ static int __init pc8736x_gpio_init(void)
dev_err(&pdev->dev, "no device found\n");
goto undo_platform_dev_add;
}
pc8736x_access.dev = &pdev->dev;
/* Verify that chip and it's GPIO unit are both enabled.
My BIOS does this, so I take minimum action here
......
......@@ -35,14 +35,6 @@ static int major = 0; /* default to dynamic major */
module_param(major, int, 0);
MODULE_PARM_DESC(major, "Major device number");
extern void nsc_gpio_dump(unsigned index);
extern ssize_t nsc_gpio_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos);
extern ssize_t nsc_gpio_read(struct file *file, char __user *buf,
size_t len, loff_t *ppos);
struct nsc_gpio_ops scx200_access = {
.owner = THIS_MODULE,
.gpio_config = scx200_gpio_configure,
......@@ -101,6 +93,9 @@ static int __init scx200_gpio_init(void)
if (rc)
goto undo_malloc;
/* nsc_gpio uses dev_dbg(), so needs this */
scx200_access.dev = &pdev->dev;
if (major)
rc = register_chrdev_region(dev, num_pins, "scx200_gpio");
else {
......
......@@ -22,13 +22,14 @@
struct nsc_gpio_ops {
struct module* owner;
u32 (*gpio_config) (unsigned iminor, u32 mask, u32 bits);
void (*gpio_dump) (unsigned iminor);
void (*gpio_dump) (struct nsc_gpio_ops *amp, unsigned iminor);
int (*gpio_get) (unsigned iminor);
void (*gpio_set) (unsigned iminor, int state);
void (*gpio_set_high)(unsigned iminor);
void (*gpio_set_low) (unsigned iminor);
void (*gpio_change) (unsigned iminor);
int (*gpio_current) (unsigned iminor);
struct device* dev; /* for dev_dbg() support, set in init */
};
extern ssize_t nsc_gpio_write(struct file *file, const char __user *data,
......@@ -36,3 +37,6 @@ extern ssize_t nsc_gpio_write(struct file *file, const char __user *data,
extern ssize_t nsc_gpio_read(struct file *file, char __user *buf,
size_t len, loff_t *ppos);
extern void nsc_gpio_dump(struct nsc_gpio_ops *amp, unsigned index);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment