1-Wire: Add support for the maxim ds1825 temperature sensor

This patch adds support for maxim ds1825 based 1-wire temperature sensors.
Signed-off-by: Raphael Assenat <raph@8d.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/w1/slaves/w1_therm

@@ -3,6 +3,7 @@ Kernel driver w1_therm
 
 Supported chips:
   * Maxim ds18*20 based temperature sensors.
+  * Maxim ds1825 based temperature sensors.
 
 Author: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
 
@@ -15,6 +16,7 @@ supported family codes:
 W1_THERM_DS18S20	0x10
 W1_THERM_DS1822		0x22
 W1_THERM_DS18B20	0x28
+W1_THERM_DS1825		0x3B
 
 Support is provided through the sysfs w1_slave file.  Each open and
 read sequence will initiate a temperature conversion then provide two

drivers/w1/slaves/w1_therm.c

@@ -91,6 +91,11 @@ static struct w1_family w1_therm_family_DS28EA00 = {
 	.fops = &w1_therm_fops,
 };
 
+static struct w1_family w1_therm_family_DS1825 = {
+	.fid = W1_THERM_DS1825,
+	.fops = &w1_therm_fops,
+};
+
 struct w1_therm_family_converter
 {
 	u8			broken;
@@ -120,6 +125,10 @@ static struct w1_therm_family_converter w1_therm_families[] = {
 		.f		= &w1_therm_family_DS28EA00,
 		.convert	= w1_DS18B20_convert_temp
 	},
+	{
+		.f		= &w1_therm_family_DS1825,
+		.convert	= w1_DS18B20_convert_temp
+	}
 };
 
 static inline int w1_DS18B20_convert_temp(u8 rom[9])

drivers/w1/w1_family.h

@@ -39,6 +39,7 @@
 #define W1_EEPROM_DS2431	0x2D
 #define W1_FAMILY_DS2760	0x30
 #define W1_FAMILY_DS2780	0x32
+#define W1_THERM_DS1825		0x3B
 #define W1_FAMILY_DS2781	0x3D
 #define W1_THERM_DS28EA00	0x42