[PATCH] IDE fixes

starting from 2.5.35 IDE stopped working on my alphas because of
following problems:

- ide_hwif_configure() ignores BARs for IDE base/control registers
  and assumes legacy 0x1f0/0x170 ports, unless controller reports
  native PCI mode (ProgIf bits 0 and 2).

  This is incorrect, as there are quite a few IDE chips operating
  in "semi-legacy" mode, i.e. legacy interrupts, but functional
  BAR0-3, like cy82c693 and ali5229. I guess Andre could give a lot
  more examples. :-)

  This happens to work on i386 simply because BIOS usually assigns
  legacy values to BAR0-3, but we can't rely on it.

  Just checking respective resource->start for zero should work in
  all cases.

- ide_pci_check_iomem(): resource->flags == 0 means "unconfigured" as well.
  Thus we avoid false positives.

- Apparently cut'n'paste typo in cy82c693.c - wrong PCI IDs.

drivers/ide/pci/cy82c693.c

@@ -429,7 +429,7 @@ static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_dev
 }
 
 static struct pci_device_id cy82c693_pci_tbl[] __devinitdata = {
-	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ 0, },
 };
 

drivers/ide/setup-pci.c

@@ -389,7 +389,7 @@ static int ide_pci_check_iomem(struct pci_dev *dev, ide_pci_device_t *d, int bar
 	ulong flags = pci_resource_flags(dev, bar);
 	
 	/* Unconfigured ? */
-	if(pci_resource_len(dev, bar) == 0)
+	if (!flags || pci_resource_len(dev, bar) == 0)
 		return 0;
 
 	/* I/O space */		
@@ -422,9 +422,7 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, ide_pci_device_t *d,
 	unsigned long ctl = 0, base = 0;
 	ide_hwif_t *hwif;
 	
-	if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE ||
-	    ((dev->class & ~(0xfa))) ||
-	    (dev->class & (port ? 4 : 1)) != 0) 
+	if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
 	{
 	    	/*  Possibly we should fail if these checks report true */
 	    	ide_pci_check_iomem(dev, d, 2*port);