ASoC: Intel: Make sure BDW based machine drivers build for SOF

BDW uses hard coded IPC calls to set SSP, not needed in SOF as SSP is
configured via topology.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/intel/boards/bdw-rt5677.c

@@ -180,6 +180,7 @@ static const struct snd_soc_ops bdw_rt5677_ops = {
 	.hw_params = bdw_rt5677_hw_params,
 };
 
+#if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
 static int bdw_rt5677_rtd_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, DRV_NAME);
@@ -198,6 +199,7 @@ static int bdw_rt5677_rtd_init(struct snd_soc_pcm_runtime *rtd)
 
 	return 0;
 }
+#endif
 
 static int bdw_rt5677_init(struct snd_soc_pcm_runtime *rtd)
 {
@@ -265,7 +267,9 @@ static struct snd_soc_dai_link bdw_rt5677_dais[] = {
 		.dynamic = 1,
 		.codec_name = "snd-soc-dummy",
 		.codec_dai_name = "snd-soc-dummy-dai",
+#if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
 		.init = bdw_rt5677_rtd_init,
+#endif
 		.trigger = {
 			SND_SOC_DPCM_TRIGGER_POST,
 			SND_SOC_DPCM_TRIGGER_POST

sound/soc/intel/boards/broadwell.c

@@ -131,6 +131,7 @@ static const struct snd_soc_ops broadwell_rt286_ops = {
 	.hw_params = broadwell_rt286_hw_params,
 };
 
+#if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
 static int broadwell_rtd_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, DRV_NAME);
@@ -149,6 +150,7 @@ static int broadwell_rtd_init(struct snd_soc_pcm_runtime *rtd)
 
 	return 0;
 }
+#endif
 
 /* broadwell digital audio interface glue - connects codec <--> CPU */
 static struct snd_soc_dai_link broadwell_rt286_dais[] = {
@@ -161,7 +163,9 @@ static struct snd_soc_dai_link broadwell_rt286_dais[] = {
 		.dynamic = 1,
 		.codec_name = "snd-soc-dummy",
 		.codec_dai_name = "snd-soc-dummy-dai",
+#if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
 		.init = broadwell_rtd_init,
+#endif
 		.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
 		.dpcm_playback = 1,
 		.dpcm_capture = 1,