Skip to content

L
linux
Commit f3af7498 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge bk://linux-dj.bkbits.net/cpufreq 

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Fix up cpufreq Makefile merge manually
parents 2d202ddc a1d487d4
Expand all Show whitespace changes
Inline Side-by-side
Showing with 1120 additions and 479 deletions
Documentation/cpu-freq/cpufreq-nforce2.txt 0 → 100644
View file @ f3af7498
The cpufreq-nforce2 driver changes the FSB on nVidia nForce2 plattforms.
This works better than on other plattforms, because the FSB of the CPU
can be controlled independently from the PCI/AGP clock.
The module has two options:
fid: multiplier * 10 (for example 8.5 = 85)
min_fsb: minimum FSB
If not set, fid is calculated from the current CPU speed and the FSB.
min_fsb defaults to FSB at boot time - 50 MHz.
IMPORTANT: The available range is limited downwards!
Also the minimum available FSB can differ, for systems
booting with 200 MHz, 150 should always work.
arch/arm/Kconfig
View file @ f3af7498
...@@ -389,17 +389,6 @@ config XIP_PHYS_ADDR ...@@ -389,17 +389,6 @@ config XIP_PHYS_ADDR
if (ARCH_SA1100 || ARCH_INTEGRATOR) if (ARCH_SA1100 || ARCH_INTEGRATOR)
config CPU_FREQ
bool "Support CPU clock change"
help
CPU clock scaling allows you to change the clock speed of the
running CPU on the fly. This is a nice method to save battery power,
because the lower the clock speed, the less power the CPU
consumes. Note that this driver doesn't automatically change the CPU
clock speed, you need some userland tools (which still have to be
written) to implement the policy. If you don't understand what this
is all about, it's safe to say 'N'.
source "drivers/cpufreq/Kconfig" source "drivers/cpufreq/Kconfig"
config CPU_FREQ_SA1100 config CPU_FREQ_SA1100
......
arch/i386/kernel/cpu/cpufreq/Kconfig
View file @ f3af7498
...@@ -4,18 +4,6 @@ ...@@ -4,18 +4,6 @@
menu "CPU Frequency scaling" menu "CPU Frequency scaling"
config CPU_FREQ
bool "CPU Frequency scaling"
help
Clock scaling allows you to change the clock speed of CPUs on the
fly. This is a nice method to save battery power on notebooks,
because the lower the clock speed, the less power the CPU consumes.
For more information, take a look at <file:Documentation/cpu-freq/>
or at <http://www.codemonkey.org.uk/projects/cpufreq/>
If in doubt, say N.
source "drivers/cpufreq/Kconfig" source "drivers/cpufreq/Kconfig"
config CPU_FREQ_TABLE config CPU_FREQ_TABLE
...@@ -182,6 +170,17 @@ config X86_P4_CLOCKMOD ...@@ -182,6 +170,17 @@ config X86_P4_CLOCKMOD
If in doubt, say N. If in doubt, say N.
config X86_CPUFREQ_NFORCE2
tristate "nVidia nForce2 FSB changing"
depends on CPU_FREQ && EXPERIMENTAL
help
This adds the CPUFreq driver for FSB changing on nVidia nForce2
plattforms.
For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
config X86_LONGRUN config X86_LONGRUN
tristate "Transmeta LongRun" tristate "Transmeta LongRun"
depends on CPU_FREQ depends on CPU_FREQ
......
arch/i386/kernel/cpu/cpufreq/Makefile
View file @ f3af7498
...@@ -9,11 +9,6 @@ obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o ...@@ -9,11 +9,6 @@ obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o
obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o
obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o
obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi.o obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o
obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o
ifdef CONFIG_X86_ACPI_CPUFREQ
ifdef CONFIG_ACPI_DEBUG
EXTRA_CFLAGS += -DACPI_DEBUG_OUTPUT
endif
endif
arch/i386/kernel/cpu/cpufreq/acpi.c → arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
View file @ f3af7498
/* /*
* acpi-cpufreq-io.c - ACPI Processor P-States Driver ($Revision: 1.3 $) * acpi-cpufreq.c - ACPI Processor P-States Driver ($Revision: 1.3 $)
* *
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
...@@ -38,16 +38,10 @@ ...@@ -38,16 +38,10 @@
#include <linux/acpi.h> #include <linux/acpi.h>
#include <acpi/processor.h> #include <acpi/processor.h>
#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg)
#define ACPI_PROCESSOR_CLASS "processor"
#define ACPI_PROCESSOR_DRIVER_NAME "ACPI Processor P-States Driver"
#define ACPI_PROCESSOR_DEVICE_NAME "Processor"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME ("acpi_processor_perf")
MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski"); MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski");
MODULE_DESCRIPTION(ACPI_PROCESSOR_DRIVER_NAME); MODULE_DESCRIPTION("ACPI Processor P-States Driver");
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");
...@@ -111,7 +105,7 @@ acpi_processor_set_performance ( ...@@ -111,7 +105,7 @@ acpi_processor_set_performance (
cpumask_t saved_mask; cpumask_t saved_mask;
int retval; int retval;
ACPI_FUNCTION_TRACE("acpi_processor_set_performance"); dprintk("acpi_processor_set_performance\n");
/* /*
* TBD: Use something other than set_cpus_allowed. * TBD: Use something other than set_cpus_allowed.
...@@ -121,18 +115,17 @@ acpi_processor_set_performance ( ...@@ -121,18 +115,17 @@ acpi_processor_set_performance (
saved_mask = current->cpus_allowed; saved_mask = current->cpus_allowed;
set_cpus_allowed(current, cpumask_of_cpu(cpu)); set_cpus_allowed(current, cpumask_of_cpu(cpu));
if (smp_processor_id() != cpu) { if (smp_processor_id() != cpu) {
return_VALUE(-EAGAIN); return (-EAGAIN);
} }
if (state == data->acpi_data.state) { if (state == data->acpi_data.state) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, dprintk("Already at target state (P%d)\n", state);
"Already at target state (P%d)\n", state));
retval = 0; retval = 0;
goto migrate_end; goto migrate_end;
} }
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Transitioning from P%d to P%d\n", dprintk("Transitioning from P%d to P%d\n",
data->acpi_data.state, state)); data->acpi_data.state, state);
/* cpufreq frequency struct */ /* cpufreq frequency struct */
cpufreq_freqs.cpu = cpu; cpufreq_freqs.cpu = cpu;
...@@ -151,13 +144,11 @@ acpi_processor_set_performance ( ...@@ -151,13 +144,11 @@ acpi_processor_set_performance (
bit_width = data->acpi_data.control_register.bit_width; bit_width = data->acpi_data.control_register.bit_width;
value = (u32) data->acpi_data.states[state].control; value = (u32) data->acpi_data.states[state].control;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, dprintk("Writing 0x%08x to port 0x%04x\n", value, port);
"Writing 0x%08x to port 0x%04x\n", value, port));
ret = acpi_processor_write_port(port, bit_width, value); ret = acpi_processor_write_port(port, bit_width, value);
if (ret) { if (ret) {
ACPI_DEBUG_PRINT((ACPI_DB_WARN, dprintk("Invalid port width 0x%04x\n", bit_width);
"Invalid port width 0x%04x\n", bit_width));
retval = ret; retval = ret;
goto migrate_end; goto migrate_end;
} }
...@@ -172,15 +163,13 @@ acpi_processor_set_performance ( ...@@ -172,15 +163,13 @@ acpi_processor_set_performance (
port = data->acpi_data.status_register.address; port = data->acpi_data.status_register.address;
bit_width = data->acpi_data.status_register.bit_width; bit_width = data->acpi_data.status_register.bit_width;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, dprintk("Looking for 0x%08x from port 0x%04x\n",
"Looking for 0x%08x from port 0x%04x\n", (u32) data->acpi_data.states[state].status, port);
(u32) data->acpi_data.states[state].status, port));
for (i=0; i<100; i++) { for (i=0; i<100; i++) {
ret = acpi_processor_read_port(port, bit_width, &value); ret = acpi_processor_read_port(port, bit_width, &value);
if (ret) { if (ret) {
ACPI_DEBUG_PRINT((ACPI_DB_WARN, dprintk("Invalid port width 0x%04x\n", bit_width);
"Invalid port width 0x%04x\n", bit_width));
retval = ret; retval = ret;
goto migrate_end; goto migrate_end;
} }
...@@ -198,21 +187,19 @@ acpi_processor_set_performance ( ...@@ -198,21 +187,19 @@ acpi_processor_set_performance (
cpufreq_freqs.old = tmp; cpufreq_freqs.old = tmp;
cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE); cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE);
cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE); cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE);
ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Transition failed\n")); printk(KERN_WARNING "acpi-cpufreq: Transition failed\n");
retval = -ENODEV; retval = -ENODEV;
goto migrate_end; goto migrate_end;
} }
ACPI_DEBUG_PRINT((ACPI_DB_INFO, dprintk("Transition successful after %d microseconds\n", i * 10);
"Transition successful after %d microseconds\n",
i * 10));
data->acpi_data.state = state; data->acpi_data.state = state;
retval = 0; retval = 0;
migrate_end: migrate_end:
set_cpus_allowed(current, saved_mask); set_cpus_allowed(current, saved_mask);
return_VALUE(retval); return (retval);
} }
...@@ -226,7 +213,7 @@ acpi_cpufreq_target ( ...@@ -226,7 +213,7 @@ acpi_cpufreq_target (
unsigned int next_state = 0; unsigned int next_state = 0;
unsigned int result = 0; unsigned int result = 0;
ACPI_FUNCTION_TRACE("acpi_cpufreq_setpolicy"); dprintk("acpi_cpufreq_setpolicy\n");
result = cpufreq_frequency_table_target(policy, result = cpufreq_frequency_table_target(policy,
data->freq_table, data->freq_table,
...@@ -234,11 +221,11 @@ acpi_cpufreq_target ( ...@@ -234,11 +221,11 @@ acpi_cpufreq_target (
relation, relation,
&next_state); &next_state);
if (result) if (result)
return_VALUE(result); return (result);
result = acpi_processor_set_performance (data, policy->cpu, next_state); result = acpi_processor_set_performance (data, policy->cpu, next_state);
return_VALUE(result); return (result);
} }
...@@ -249,12 +236,12 @@ acpi_cpufreq_verify ( ...@@ -249,12 +236,12 @@ acpi_cpufreq_verify (
unsigned int result = 0; unsigned int result = 0;
struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu]; struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
ACPI_FUNCTION_TRACE("acpi_cpufreq_verify"); dprintk("acpi_cpufreq_verify\n");
result = cpufreq_frequency_table_verify(policy, result = cpufreq_frequency_table_verify(policy,
data->freq_table); data->freq_table);
return_VALUE(result); return (result);
} }
...@@ -308,17 +295,17 @@ acpi_processor_cpu_init_pdc_est( ...@@ -308,17 +295,17 @@ acpi_processor_cpu_init_pdc_est(
union acpi_object *obj; union acpi_object *obj;
u32 *buf; u32 *buf;
struct cpuinfo_x86 *c = cpu_data + cpu; struct cpuinfo_x86 *c = cpu_data + cpu;
ACPI_FUNCTION_TRACE("acpi_processor_cpu_init_pdc_est"); dprintk("acpi_processor_cpu_init_pdc_est\n");
if (!cpu_has(c, X86_FEATURE_EST)) if (!cpu_has(c, X86_FEATURE_EST))
return_VOID; return;
/* Initialize pdc. It will be used later. */ /* Initialize pdc. It will be used later. */
if (!obj_list) if (!obj_list)
return_VOID; return;
if (!(obj_list->count && obj_list->pointer)) if (!(obj_list->count && obj_list->pointer))
return_VOID; return;
obj = obj_list->pointer; obj = obj_list->pointer;
if ((obj->buffer.length == 12) && obj->buffer.pointer) { if ((obj->buffer.length == 12) && obj->buffer.pointer) {
...@@ -328,7 +315,7 @@ acpi_processor_cpu_init_pdc_est( ...@@ -328,7 +315,7 @@ acpi_processor_cpu_init_pdc_est(
buf[2] = ACPI_PDC_EST_CAPABILITY_SMP; buf[2] = ACPI_PDC_EST_CAPABILITY_SMP;
perf->pdc = obj_list; perf->pdc = obj_list;
} }
return_VOID; return;
} }
...@@ -341,11 +328,11 @@ acpi_processor_cpu_init_pdc( ...@@ -341,11 +328,11 @@ acpi_processor_cpu_init_pdc(
) )
{ {
struct cpuinfo_x86 *c = cpu_data + cpu; struct cpuinfo_x86 *c = cpu_data + cpu;
ACPI_FUNCTION_TRACE("acpi_processor_cpu_init_pdc"); dprintk("acpi_processor_cpu_init_pdc\n");
perf->pdc = NULL; perf->pdc = NULL;
if (cpu_has(c, X86_FEATURE_EST)) if (cpu_has(c, X86_FEATURE_EST))
acpi_processor_cpu_init_pdc_est(perf, cpu, obj_list); acpi_processor_cpu_init_pdc_est(perf, cpu, obj_list);
return_VOID; return;
} }
...@@ -362,14 +349,14 @@ acpi_cpufreq_cpu_init ( ...@@ -362,14 +349,14 @@ acpi_cpufreq_cpu_init (
u32 arg0_buf[3]; u32 arg0_buf[3];
struct acpi_object_list arg_list = {1, &arg0}; struct acpi_object_list arg_list = {1, &arg0};
ACPI_FUNCTION_TRACE("acpi_cpufreq_cpu_init"); dprintk("acpi_cpufreq_cpu_init\n");
/* setup arg_list for _PDC settings */ /* setup arg_list for _PDC settings */
arg0.buffer.length = 12; arg0.buffer.length = 12;
arg0.buffer.pointer = (u8 *) arg0_buf; arg0.buffer.pointer = (u8 *) arg0_buf;
data = kmalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL); data = kmalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
if (!data) if (!data)
return_VALUE(-ENOMEM); return (-ENOMEM);
memset(data, 0, sizeof(struct cpufreq_acpi_io)); memset(data, 0, sizeof(struct cpufreq_acpi_io));
acpi_io_data[cpu] = data; acpi_io_data[cpu] = data;
...@@ -383,15 +370,15 @@ acpi_cpufreq_cpu_init ( ...@@ -383,15 +370,15 @@ acpi_cpufreq_cpu_init (
/* capability check */ /* capability check */
if (data->acpi_data.state_count <= 1) { if (data->acpi_data.state_count <= 1) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "No P-States\n")); dprintk("No P-States\n");
result = -ENODEV; result = -ENODEV;
goto err_unreg; goto err_unreg;
} }
if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO) || if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO) ||
(data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { (data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unsupported address space [%d, %d]\n", dprintk("Unsupported address space [%d, %d]\n",
(u32) (data->acpi_data.control_register.space_id), (u32) (data->acpi_data.control_register.space_id),
(u32) (data->acpi_data.status_register.space_id))); (u32) (data->acpi_data.status_register.space_id));
result = -ENODEV; result = -ENODEV;
goto err_unreg; goto err_unreg;
} }
...@@ -432,17 +419,17 @@ acpi_cpufreq_cpu_init ( ...@@ -432,17 +419,17 @@ acpi_cpufreq_cpu_init (
/* notify BIOS that we exist */ /* notify BIOS that we exist */
acpi_processor_notify_smm(THIS_MODULE); acpi_processor_notify_smm(THIS_MODULE);
printk(KERN_INFO "cpufreq: CPU%u - ACPI performance management activated.\n", printk(KERN_INFO "acpi-cpufreq: CPU%u - ACPI performance management activated.\n",
cpu); cpu);
for (i = 0; i < data->acpi_data.state_count; i++) for (i = 0; i < data->acpi_data.state_count; i++)
printk(KERN_INFO "cpufreq: %cP%d: %d MHz, %d mW, %d uS\n", dprintk(" %cP%d: %d MHz, %d mW, %d uS\n",
(i == data->acpi_data.state?'*':' '), i, (i == data->acpi_data.state?'*':' '), i,
(u32) data->acpi_data.states[i].core_frequency, (u32) data->acpi_data.states[i].core_frequency,
(u32) data->acpi_data.states[i].power, (u32) data->acpi_data.states[i].power,
(u32) data->acpi_data.states[i].transition_latency); (u32) data->acpi_data.states[i].transition_latency);
cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu); cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu);
return_VALUE(result); return (result);
err_freqfree: err_freqfree:
kfree(data->freq_table); kfree(data->freq_table);
...@@ -452,7 +439,7 @@ acpi_cpufreq_cpu_init ( ...@@ -452,7 +439,7 @@ acpi_cpufreq_cpu_init (
kfree(data); kfree(data);
acpi_io_data[cpu] = NULL; acpi_io_data[cpu] = NULL;
return_VALUE(result); return (result);
} }
...@@ -463,7 +450,7 @@ acpi_cpufreq_cpu_exit ( ...@@ -463,7 +450,7 @@ acpi_cpufreq_cpu_exit (
struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu]; struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
ACPI_FUNCTION_TRACE("acpi_cpufreq_cpu_exit"); dprintk("acpi_cpufreq_cpu_exit\n");
if (data) { if (data) {
cpufreq_frequency_table_put_attr(policy->cpu); cpufreq_frequency_table_put_attr(policy->cpu);
...@@ -472,7 +459,7 @@ acpi_cpufreq_cpu_exit ( ...@@ -472,7 +459,7 @@ acpi_cpufreq_cpu_exit (
kfree(data); kfree(data);
} }
return_VALUE(0); return (0);
} }
...@@ -497,24 +484,26 @@ acpi_cpufreq_init (void) ...@@ -497,24 +484,26 @@ acpi_cpufreq_init (void)
{ {
int result = 0; int result = 0;
ACPI_FUNCTION_TRACE("acpi_cpufreq_init"); dprintk("acpi_cpufreq_init\n");
result = cpufreq_register_driver(&acpi_cpufreq_driver); result = cpufreq_register_driver(&acpi_cpufreq_driver);
return_VALUE(result); return (result);
} }
static void __exit static void __exit
acpi_cpufreq_exit (void) acpi_cpufreq_exit (void)
{ {
ACPI_FUNCTION_TRACE("acpi_cpufreq_exit"); dprintk("acpi_cpufreq_exit\n");
cpufreq_unregister_driver(&acpi_cpufreq_driver); cpufreq_unregister_driver(&acpi_cpufreq_driver);
return_VOID; return;
} }
late_initcall(acpi_cpufreq_init); late_initcall(acpi_cpufreq_init);
module_exit(acpi_cpufreq_exit); module_exit(acpi_cpufreq_exit);
MODULE_ALIAS("acpi");
arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c 0 → 100644
View file @ f3af7498
This diff is collapsed.
arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
View file @ f3af7498
...@@ -141,17 +141,7 @@ module_param (max_duration, int, 0444); ...@@ -141,17 +141,7 @@ module_param (max_duration, int, 0444);
#define POLICY_MIN_DIV 20 #define POLICY_MIN_DIV 20
/* DEBUG #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg)
* Define it if you want verbose debug output
*/
#define SUSPMOD_DEBUG 1
#ifdef SUSPMOD_DEBUG
#define dprintk(msg...) printk(KERN_DEBUG "cpufreq:" msg)
#else
#define dprintk(msg...) do { } while(0)
#endif
/** /**
* we can detect a core multipiler from dir0_lsb * we can detect a core multipiler from dir0_lsb
...@@ -194,7 +184,7 @@ static __init struct pci_dev *gx_detect_chipset(void) ...@@ -194,7 +184,7 @@ static __init struct pci_dev *gx_detect_chipset(void)
/* check if CPU is a MediaGX or a Geode. */ /* check if CPU is a MediaGX or a Geode. */
if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) && if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) &&
(current_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) { (current_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) {
printk(KERN_INFO "gx-suspmod: error: no MediaGX/Geode processor found!\n"); dprintk("error: no MediaGX/Geode processor found!\n");
return NULL; return NULL;
} }
...@@ -205,7 +195,7 @@ static __init struct pci_dev *gx_detect_chipset(void) ...@@ -205,7 +195,7 @@ static __init struct pci_dev *gx_detect_chipset(void)
} }
} }
dprintk(KERN_INFO "gx-suspmod: error: no supported chipset found!\n"); dprintk("error: no supported chipset found!\n");
return NULL; return NULL;
} }
......
arch/i386/kernel/cpu/cpufreq/longhaul.c
View file @ f3af7498
...@@ -58,21 +58,9 @@ static int vrmrev; ...@@ -58,21 +58,9 @@ static int vrmrev;
/* Module parameters */ /* Module parameters */
static int dont_scale_voltage; static int dont_scale_voltage;
static int debug;
static void dprintk(const char *fmt, ...)
{
char s[256];
va_list args;
if (debug == 0)
return;
va_start(args, fmt); #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg)
vsprintf(s, fmt, args);
printk(s);
va_end(args);
}
#define __hlt() __asm__ __volatile__("hlt": : :"memory") #define __hlt() __asm__ __volatile__("hlt": : :"memory")
...@@ -84,6 +72,8 @@ static int voltage_table[32]; ...@@ -84,6 +72,8 @@ static int voltage_table[32];
static unsigned int highest_speed, lowest_speed; /* kHz */ static unsigned int highest_speed, lowest_speed; /* kHz */
static int longhaul_version; static int longhaul_version;
static struct cpufreq_frequency_table *longhaul_table; static struct cpufreq_frequency_table *longhaul_table;
#ifdef CONFIG_CPU_FREQ_DEBUG
static char speedbuffer[8]; static char speedbuffer[8];
static char *print_speed(int speed) static char *print_speed(int speed)
...@@ -98,6 +88,7 @@ static char *print_speed(int speed) ...@@ -98,6 +88,7 @@ static char *print_speed(int speed)
return speedbuffer; return speedbuffer;
} }
#endif
static unsigned int calc_speed(int mult) static unsigned int calc_speed(int mult)
...@@ -192,7 +183,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index) ...@@ -192,7 +183,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index)
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
dprintk (KERN_INFO PFX "Setting to FSB:%dMHz Mult:%d.%dx (%s)\n", dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
fsb, mult/10, mult%10, print_speed(speed/1000)); fsb, mult/10, mult%10, print_speed(speed/1000));
switch (longhaul_version) { switch (longhaul_version) {
...@@ -356,7 +347,7 @@ static int __init longhaul_get_ranges(void) ...@@ -356,7 +347,7 @@ static int __init longhaul_get_ranges(void)
} }
} }
dprintk (KERN_INFO PFX "MinMult:%d.%dx MaxMult:%d.%dx\n", dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n",
minmult/10, minmult%10, maxmult/10, maxmult%10); minmult/10, minmult%10, maxmult/10, maxmult%10);
if (fsb == -1) { if (fsb == -1) {
...@@ -366,9 +357,9 @@ static int __init longhaul_get_ranges(void) ...@@ -366,9 +357,9 @@ static int __init longhaul_get_ranges(void)
highest_speed = calc_speed(maxmult); highest_speed = calc_speed(maxmult);
lowest_speed = calc_speed(minmult); lowest_speed = calc_speed(minmult);
dprintk (KERN_INFO PFX "FSB:%dMHz ", fsb); dprintk ("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb,
dprintk ("Lowest speed:%s ", print_speed(lowest_speed/1000)); print_speed(lowest_speed/1000),
dprintk ("Highest speed:%s\n", print_speed(highest_speed/1000)); print_speed(highest_speed/1000));
if (lowest_speed == highest_speed) { if (lowest_speed == highest_speed) {
printk (KERN_INFO PFX "highestspeed == lowest, aborting.\n"); printk (KERN_INFO PFX "highestspeed == lowest, aborting.\n");
...@@ -434,11 +425,11 @@ static void __init longhaul_setup_voltagescaling(void) ...@@ -434,11 +425,11 @@ static void __init longhaul_setup_voltagescaling(void)
} }
if (vrmrev==0) { if (vrmrev==0) {
dprintk (KERN_INFO PFX "VRM 8.5 : "); dprintk ("VRM 8.5 \n");
memcpy (voltage_table, vrm85scales, sizeof(voltage_table)); memcpy (voltage_table, vrm85scales, sizeof(voltage_table));
numvscales = (voltage_table[maxvid]-voltage_table[minvid])/25; numvscales = (voltage_table[maxvid]-voltage_table[minvid])/25;
} else { } else {
dprintk (KERN_INFO PFX "Mobile VRM : "); dprintk ("Mobile VRM \n");
memcpy (voltage_table, mobilevrmscales, sizeof(voltage_table)); memcpy (voltage_table, mobilevrmscales, sizeof(voltage_table));
numvscales = (voltage_table[maxvid]-voltage_table[minvid])/5; numvscales = (voltage_table[maxvid]-voltage_table[minvid])/5;
} }
...@@ -658,9 +649,6 @@ static void __exit longhaul_exit(void) ...@@ -658,9 +649,6 @@ static void __exit longhaul_exit(void)
module_param (dont_scale_voltage, int, 0644); module_param (dont_scale_voltage, int, 0644);
MODULE_PARM_DESC(dont_scale_voltage, "Don't scale voltage of processor"); MODULE_PARM_DESC(dont_scale_voltage, "Don't scale voltage of processor");
module_param (debug, int, 0644);
MODULE_PARM_DESC(debug, "Dump debugging information.");
MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>"); MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors."); MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
MODULE_LICENSE ("GPL"); MODULE_LICENSE ("GPL");
......
arch/i386/kernel/cpu/cpufreq/longrun.c
View file @ f3af7498
...@@ -16,6 +16,8 @@ ...@@ -16,6 +16,8 @@
#include <asm/processor.h> #include <asm/processor.h>
#include <asm/timex.h> #include <asm/timex.h>
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longrun", msg)
static struct cpufreq_driver longrun_driver; static struct cpufreq_driver longrun_driver;
/** /**
...@@ -38,12 +40,14 @@ static void __init longrun_get_policy(struct cpufreq_policy *policy) ...@@ -38,12 +40,14 @@ static void __init longrun_get_policy(struct cpufreq_policy *policy)
u32 msr_lo, msr_hi; u32 msr_lo, msr_hi;
rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
dprintk("longrun flags are %x - %x\n", msr_lo, msr_hi);
if (msr_lo & 0x01) if (msr_lo & 0x01)
policy->policy = CPUFREQ_POLICY_PERFORMANCE; policy->policy = CPUFREQ_POLICY_PERFORMANCE;
else else
policy->policy = CPUFREQ_POLICY_POWERSAVE; policy->policy = CPUFREQ_POLICY_POWERSAVE;
rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
dprintk("longrun ctrl is %x - %x\n", msr_lo, msr_hi);
msr_lo &= 0x0000007F; msr_lo &= 0x0000007F;
msr_hi &= 0x0000007F; msr_hi &= 0x0000007F;
...@@ -146,6 +150,7 @@ static unsigned int longrun_get(unsigned int cpu) ...@@ -146,6 +150,7 @@ static unsigned int longrun_get(unsigned int cpu)
return 0; return 0;
cpuid(0x80860007, &eax, &ebx, &ecx, &edx); cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
dprintk("cpuid eax is %u\n", eax);
return (eax * 1000); return (eax * 1000);
} }
...@@ -191,6 +196,8 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq, ...@@ -191,6 +196,8 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq,
rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
*high_freq = msr_lo * 1000; /* to kHz */ *high_freq = msr_lo * 1000; /* to kHz */
dprintk("longrun table interface told %u - %u kHz\n", *low_freq, *high_freq);
if (*low_freq > *high_freq) if (*low_freq > *high_freq)
*low_freq = *high_freq; *low_freq = *high_freq;
return 0; return 0;
...@@ -199,6 +206,7 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq, ...@@ -199,6 +206,7 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq,
/* set the upper border to the value determined during TSC init */ /* set the upper border to the value determined during TSC init */
*high_freq = (cpu_khz / 1000); *high_freq = (cpu_khz / 1000);
*high_freq = *high_freq * 1000; *high_freq = *high_freq * 1000;
dprintk("high frequency is %u kHz\n", *high_freq);
/* get current borders */ /* get current borders */
rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
...@@ -225,6 +233,7 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq, ...@@ -225,6 +233,7 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq,
/* restore values */ /* restore values */
wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi); wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi);
} }
dprintk("percentage is %u %%, freq is %u MHz\n", ecx, eax);
/* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) /* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
* eqals * eqals
...@@ -240,6 +249,8 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq, ...@@ -240,6 +249,8 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq,
edx = (eax - ebx) / (100 - ecx); edx = (eax - ebx) / (100 - ecx);
*low_freq = edx * 1000; /* back to kHz */ *low_freq = edx * 1000; /* back to kHz */
dprintk("low frequency is %u kHz\n", *low_freq);
if (*low_freq > *high_freq) if (*low_freq > *high_freq)
*low_freq = *high_freq; *low_freq = *high_freq;
......
arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
View file @ f3af7498
...@@ -36,6 +36,7 @@ ...@@ -36,6 +36,7 @@
#include "speedstep-lib.h" #include "speedstep-lib.h"
#define PFX "p4-clockmod: " #define PFX "p4-clockmod: "
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "p4-clockmod", msg)
/* /*
* Duty Cycle (3bits), note DC_DISABLE is not specified in * Duty Cycle (3bits), note DC_DISABLE is not specified in
...@@ -62,20 +63,20 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) ...@@ -62,20 +63,20 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
return -EINVAL; return -EINVAL;
rdmsr(MSR_IA32_THERM_STATUS, l, h); rdmsr(MSR_IA32_THERM_STATUS, l, h);
#if 0
if (l & 0x01) if (l & 0x01)
printk(KERN_DEBUG PFX "CPU#%d currently thermal throttled\n", cpu); dprintk("CPU#%d currently thermal throttled\n", cpu);
#endif
if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT)) if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT))
newstate = DC_38PT; newstate = DC_38PT;
rdmsr(MSR_IA32_THERM_CONTROL, l, h); rdmsr(MSR_IA32_THERM_CONTROL, l, h);
if (newstate == DC_DISABLE) { if (newstate == DC_DISABLE) {
/* printk(KERN_INFO PFX "CPU#%d disabling modulation\n", cpu); */ dprintk("CPU#%d disabling modulation\n", cpu);
wrmsr(MSR_IA32_THERM_CONTROL, l & ~(1<<4), h); wrmsr(MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
} else { } else {
/* printk(KERN_INFO PFX "CPU#%d setting duty cycle to %d%%\n", dprintk("CPU#%d setting duty cycle to %d%%\n",
cpu, ((125 * newstate) / 10)); */ cpu, ((125 * newstate) / 10));
/* bits 63 - 5 : reserved /* bits 63 - 5 : reserved
* bit 4 : enable/disable * bit 4 : enable/disable
* bits 3-1 : duty cycle * bits 3-1 : duty cycle
...@@ -223,6 +224,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) ...@@ -223,6 +224,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
case 0x0f11: case 0x0f11:
case 0x0f12: case 0x0f12:
has_N44_O17_errata[policy->cpu] = 1; has_N44_O17_errata[policy->cpu] = 1;
dprintk("has errata -- disabling low frequencies\n");
} }
/* get max frequency */ /* get max frequency */
...@@ -300,6 +302,7 @@ static struct cpufreq_driver p4clockmod_driver = { ...@@ -300,6 +302,7 @@ static struct cpufreq_driver p4clockmod_driver = {
static int __init cpufreq_p4_init(void) static int __init cpufreq_p4_init(void)
{ {
struct cpuinfo_x86 *c = cpu_data; struct cpuinfo_x86 *c = cpu_data;
int ret;
/* /*
* THERM_CONTROL is architectural for IA32 now, so * THERM_CONTROL is architectural for IA32 now, so
...@@ -312,9 +315,11 @@ static int __init cpufreq_p4_init(void) ...@@ -312,9 +315,11 @@ static int __init cpufreq_p4_init(void)
!test_bit(X86_FEATURE_ACC, c->x86_capability)) !test_bit(X86_FEATURE_ACC, c->x86_capability))
return -ENODEV; return -ENODEV;
ret = cpufreq_register_driver(&p4clockmod_driver);
if (!ret)
printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n"); printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");
return cpufreq_register_driver(&p4clockmod_driver); return (ret);
} }
......
arch/i386/kernel/cpu/cpufreq/powernow-k7.c
View file @ f3af7498
...@@ -66,6 +66,7 @@ union powernow_acpi_control_t { ...@@ -66,6 +66,7 @@ union powernow_acpi_control_t {
}; };
#endif #endif
#ifdef CONFIG_CPU_FREQ_DEBUG
/* divide by 1000 to get VID. */ /* divide by 1000 to get VID. */
static int mobile_vid_table[32] = { static int mobile_vid_table[32] = {
2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650, 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
...@@ -73,6 +74,7 @@ static int mobile_vid_table[32] = { ...@@ -73,6 +74,7 @@ static int mobile_vid_table[32] = {
1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100, 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
1075, 1050, 1024, 1000, 975, 950, 925, 0, 1075, 1050, 1024, 1000, 975, 950, 925, 0,
}; };
#endif
/* divide by 10 to get FID. */ /* divide by 10 to get FID. */
static int fid_codes[32] = { static int fid_codes[32] = {
...@@ -87,7 +89,6 @@ static int fid_codes[32] = { ...@@ -87,7 +89,6 @@ static int fid_codes[32] = {
*/ */
static int acpi_force; static int acpi_force;
static int debug;
static struct cpufreq_frequency_table *powernow_table; static struct cpufreq_frequency_table *powernow_table;
...@@ -100,20 +101,7 @@ static unsigned int fsb; ...@@ -100,20 +101,7 @@ static unsigned int fsb;
static unsigned int latency; static unsigned int latency;
static char have_a0; static char have_a0;
static void dprintk(const char *fmt, ...) #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k7", msg)
{
char s[256];
va_list args;
if (debug==0)
return;
va_start(args,fmt);
vsprintf(s, fmt, args);
printk(s);
va_end(args);
}
static int check_fsb(unsigned int fsbspeed) static int check_fsb(unsigned int fsbspeed)
{ {
...@@ -202,9 +190,6 @@ static int get_ranges (unsigned char *pst) ...@@ -202,9 +190,6 @@ static int get_ranges (unsigned char *pst)
#endif #endif
} }
dprintk (KERN_INFO PFX " FID: 0x%x (%d.%dx [%dMHz]) ", fid,
fid_codes[fid] / 10, fid_codes[fid] % 10, speed/1000);
if (speed < minimum_speed) if (speed < minimum_speed)
minimum_speed = speed; minimum_speed = speed;
if (speed > maximum_speed) if (speed > maximum_speed)
...@@ -212,7 +197,11 @@ static int get_ranges (unsigned char *pst) ...@@ -212,7 +197,11 @@ static int get_ranges (unsigned char *pst)
vid = *pst++; vid = *pst++;
powernow_table[j].index |= (vid << 8); /* upper 8 bits */ powernow_table[j].index |= (vid << 8); /* upper 8 bits */
dprintk ("VID: 0x%x (%d.%03dV)\n", vid, mobile_vid_table[vid]/1000,
dprintk (" FID: 0x%x (%d.%dx [%dMHz]) "
"VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
fid_codes[fid] % 10, speed/1000, vid,
mobile_vid_table[vid]/1000,
mobile_vid_table[vid]%1000); mobile_vid_table[vid]%1000);
} }
powernow_table[number_scales].frequency = CPUFREQ_TABLE_END; powernow_table[number_scales].frequency = CPUFREQ_TABLE_END;
...@@ -302,7 +291,7 @@ static void change_speed (unsigned int index) ...@@ -302,7 +291,7 @@ static void change_speed (unsigned int index)
#ifdef CONFIG_X86_POWERNOW_K7_ACPI #ifdef CONFIG_X86_POWERNOW_K7_ACPI
struct acpi_processor_performance *acpi_processor_perf; static struct acpi_processor_performance *acpi_processor_perf;
static int powernow_acpi_init(void) static int powernow_acpi_init(void)
{ {
...@@ -361,7 +350,7 @@ static int powernow_acpi_init(void) ...@@ -361,7 +350,7 @@ static int powernow_acpi_init(void)
unsigned int speed; unsigned int speed;
pc.val = (unsigned long) acpi_processor_perf->states[i].control; pc.val = (unsigned long) acpi_processor_perf->states[i].control;
dprintk (KERN_INFO PFX "acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n", dprintk ("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
i, i,
(u32) acpi_processor_perf->states[i].core_frequency, (u32) acpi_processor_perf->states[i].core_frequency,
(u32) acpi_processor_perf->states[i].power, (u32) acpi_processor_perf->states[i].power,
...@@ -383,9 +372,10 @@ static int powernow_acpi_init(void) ...@@ -383,9 +372,10 @@ static int powernow_acpi_init(void)
powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
} }
dprintk (KERN_INFO PFX " FID: 0x%x (%d.%dx [%dMHz]) ", fid, dprintk (" FID: 0x%x (%d.%dx [%dMHz]) "
fid_codes[fid] / 10, fid_codes[fid] % 10, speed/1000); "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
dprintk ("VID: 0x%x (%d.%03dV)\n", vid, mobile_vid_table[vid]/1000, fid_codes[fid] % 10, speed/1000, vid,
mobile_vid_table[vid]/1000,
mobile_vid_table[vid]%1000); mobile_vid_table[vid]%1000);
if (latency < pc.bits.sgtc) if (latency < pc.bits.sgtc)
...@@ -439,21 +429,20 @@ static int powernow_decode_bios (int maxfid, int startvid) ...@@ -439,21 +429,20 @@ static int powernow_decode_bios (int maxfid, int startvid)
p = phys_to_virt(i); p = phys_to_virt(i);
if (memcmp(p, "AMDK7PNOW!", 10) == 0){ if (memcmp(p, "AMDK7PNOW!", 10) == 0){
dprintk (KERN_INFO PFX "Found PSB header at %p\n", p); dprintk ("Found PSB header at %p\n", p);
psb = (struct psb_s *) p; psb = (struct psb_s *) p;
dprintk (KERN_INFO PFX "Table version: 0x%x\n", psb->tableversion); dprintk ("Table version: 0x%x\n", psb->tableversion);
if (psb->tableversion != 0x12) { if (psb->tableversion != 0x12) {
printk (KERN_INFO PFX "Sorry, only v1.2 tables supported right now\n"); printk (KERN_INFO PFX "Sorry, only v1.2 tables supported right now\n");
return -ENODEV; return -ENODEV;
} }
dprintk (KERN_INFO PFX "Flags: 0x%x (", psb->flags); dprintk ("Flags: 0x%x\n", psb->flags);
if ((psb->flags & 1)==0) { if ((psb->flags & 1)==0) {
dprintk ("Mobile"); dprintk ("Mobile voltage regulator\n");
} else { } else {
dprintk ("Desktop"); dprintk ("Desktop voltage regulator\n");
} }
dprintk (" voltage regulator)\n");
latency = psb->settlingtime; latency = psb->settlingtime;
if (latency < 100) { if (latency < 100) {
...@@ -461,8 +450,8 @@ static int powernow_decode_bios (int maxfid, int startvid) ...@@ -461,8 +450,8 @@ static int powernow_decode_bios (int maxfid, int startvid)
"Should be at least 100. Correcting.\n", latency); "Should be at least 100. Correcting.\n", latency);
latency = 100; latency = 100;
} }
dprintk (KERN_INFO PFX "Settling Time: %d microseconds.\n", psb->settlingtime); dprintk ("Settling Time: %d microseconds.\n", psb->settlingtime);
dprintk (KERN_INFO PFX "Has %d PST tables. (Only dumping ones relevant to this CPU).\n", psb->numpst); dprintk ("Has %d PST tables. (Only dumping ones relevant to this CPU).\n", psb->numpst);
p += sizeof (struct psb_s); p += sizeof (struct psb_s);
...@@ -475,11 +464,9 @@ static int powernow_decode_bios (int maxfid, int startvid) ...@@ -475,11 +464,9 @@ static int powernow_decode_bios (int maxfid, int startvid)
if ((etuple == pst->cpuid) && check_fsb(pst->fsbspeed) && if ((etuple == pst->cpuid) && check_fsb(pst->fsbspeed) &&
(maxfid==pst->maxfid) && (startvid==pst->startvid)) (maxfid==pst->maxfid) && (startvid==pst->startvid))
{ {
dprintk (KERN_INFO PFX "PST:%d (@%p)\n", i, pst); dprintk ("PST:%d (@%p)\n", i, pst);
dprintk (KERN_INFO PFX " cpuid: 0x%x ", pst->cpuid); dprintk (" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n",
dprintk ("fsb: %d ", pst->fsbspeed); pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
dprintk ("maxFID: 0x%x ", pst->maxfid);
dprintk ("startvid: 0x%x\n", pst->startvid);
ret = get_ranges ((char *) pst + sizeof (struct pst_s)); ret = get_ranges ((char *) pst + sizeof (struct pst_s));
return ret; return ret;
...@@ -605,7 +592,7 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy) ...@@ -605,7 +592,7 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy)
printk(KERN_WARNING PFX "can not determine bus frequency\n"); printk(KERN_WARNING PFX "can not determine bus frequency\n");
return -EINVAL; return -EINVAL;
} }
dprintk(KERN_INFO PFX "FSB: %3d.%03d MHz\n", fsb/1000, fsb%1000); dprintk("FSB: %3d.%03d MHz\n", fsb/1000, fsb%1000);
if (dmi_check_system(powernow_dmi_table) || acpi_force) { if (dmi_check_system(powernow_dmi_table) || acpi_force) {
printk (KERN_INFO PFX "PSB/PST known to be broken. Trying ACPI instead\n"); printk (KERN_INFO PFX "PSB/PST known to be broken. Trying ACPI instead\n");
...@@ -688,8 +675,6 @@ static void __exit powernow_exit (void) ...@@ -688,8 +675,6 @@ static void __exit powernow_exit (void)
kfree(powernow_table); kfree(powernow_table);
} }
module_param(debug, int, 0444);
MODULE_PARM_DESC(debug, "enable debug output.");
module_param(acpi_force, int, 0444); module_param(acpi_force, int, 0444);
MODULE_PARM_DESC(acpi_force, "Force ACPI to be used."); MODULE_PARM_DESC(acpi_force, "Force ACPI to be used.");
......
arch/i386/kernel/cpu/cpufreq/powernow-k8.c
View file @ f3af7498
This diff is collapsed.
arch/i386/kernel/cpu/cpufreq/powernow-k8.h
View file @ f3af7498
...@@ -168,11 +168,7 @@ struct pst_s { ...@@ -168,11 +168,7 @@ struct pst_s {
u8 vid; u8 vid;
}; };
#ifdef DEBUG #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg)
#define dprintk(msg...) printk(msg)
#else
#define dprintk(msg...) do { } while(0)
#endif
static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid); static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid);
static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid); static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid);
......
arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
View file @ f3af7498
...@@ -35,13 +35,8 @@ ...@@ -35,13 +35,8 @@
#define PFX "speedstep-centrino: " #define PFX "speedstep-centrino: "
#define MAINTAINER "Jeremy Fitzhardinge <jeremy@goop.org>" #define MAINTAINER "Jeremy Fitzhardinge <jeremy@goop.org>"
/*#define CENTRINO_DEBUG*/ #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
#ifdef CENTRINO_DEBUG
#define dprintk(msg...) printk(msg)
#else
#define dprintk(msg...) do { } while(0)
#endif
struct cpu_id struct cpu_id
{ {
...@@ -254,13 +249,15 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy) ...@@ -254,13 +249,15 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy)
/* Matched a non-match */ /* Matched a non-match */
printk(KERN_INFO PFX "no table support for CPU model \"%s\": \n", printk(KERN_INFO PFX "no table support for CPU model \"%s\": \n",
cpu->x86_model_id); cpu->x86_model_id);
#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
printk(KERN_INFO PFX "try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled\n"); printk(KERN_INFO PFX "try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled\n");
#endif
return -ENOENT; return -ENOENT;
} }
centrino_model = model; centrino_model = model;
printk(KERN_INFO PFX "found \"%s\": max frequency: %dkHz\n", dprintk("found \"%s\": max frequency: %dkHz\n",
model->model_name, model->max_freq); model->model_name, model->max_freq);
return 0; return 0;
...@@ -353,38 +350,43 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) ...@@ -353,38 +350,43 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy)
p.pdc = &arg_list; p.pdc = &arg_list;
/* register with ACPI core */ /* register with ACPI core */
if (acpi_processor_register_performance(&p, policy->cpu)) if (acpi_processor_register_performance(&p, policy->cpu)) {
printk(KERN_INFO PFX "obtaining ACPI data failed\n");
return -EIO; return -EIO;
}
/* verify the acpi_data */ /* verify the acpi_data */
if (p.state_count <= 1) { if (p.state_count <= 1) {
printk(KERN_DEBUG "No P-States\n"); dprintk("No P-States\n");
result = -ENODEV; result = -ENODEV;
goto err_unreg; goto err_unreg;
} }
if ((p.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) || if ((p.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
(p.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { (p.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
printk(KERN_DEBUG "Invalid control/status registers\n"); dprintk("Invalid control/status registers (%x - %x)\n",
p.control_register.space_id, p.status_register.space_id);
result = -EIO; result = -EIO;
goto err_unreg; goto err_unreg;
} }
for (i=0; i<p.state_count; i++) { for (i=0; i<p.state_count; i++) {
if (p.states[i].control != p.states[i].status) { if (p.states[i].control != p.states[i].status) {
printk(KERN_DEBUG "Different control and status values\n"); dprintk("Different control (%x) and status values (%x)\n",
p.states[i].control, p.states[i].status);
result = -EINVAL; result = -EINVAL;
goto err_unreg; goto err_unreg;
} }
if (!p.states[i].core_frequency) { if (!p.states[i].core_frequency) {
printk(KERN_DEBUG "Zero core frequency\n"); dprintk("Zero core frequency for state %u\n", i);
result = -EINVAL; result = -EINVAL;
goto err_unreg; goto err_unreg;
} }
if (p.states[i].core_frequency > p.states[0].core_frequency) { if (p.states[i].core_frequency > p.states[0].core_frequency) {
printk(KERN_DEBUG "P%u has larger frequency than P0, skipping\n", i); dprintk("P%u has larger frequency (%u) than P0 (%u), skipping\n", i,
p.states[i].core_frequency, p.states[0].core_frequency);
p.states[i].core_frequency = 0; p.states[i].core_frequency = 0;
continue; continue;
} }
...@@ -409,23 +411,31 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) ...@@ -409,23 +411,31 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy)
for (i=0; i<p.state_count; i++) { for (i=0; i<p.state_count; i++) {
centrino_model->op_points[i].index = p.states[i].control; centrino_model->op_points[i].index = p.states[i].control;
centrino_model->op_points[i].frequency = p.states[i].core_frequency * 1000; centrino_model->op_points[i].frequency = p.states[i].core_frequency * 1000;
dprintk("adding state %i with frequency %u and control value %04x\n",
i, centrino_model->op_points[i].frequency, centrino_model->op_points[i].index);
} }
centrino_model->op_points[p.state_count].frequency = CPUFREQ_TABLE_END; centrino_model->op_points[p.state_count].frequency = CPUFREQ_TABLE_END;
cur_freq = get_cur_freq(policy->cpu); cur_freq = get_cur_freq(policy->cpu);
for (i=0; i<p.state_count; i++) { for (i=0; i<p.state_count; i++) {
if (!p.states[i].core_frequency) {
dprintk("skipping state %u\n", i);
centrino_model->op_points[i].frequency = CPUFREQ_ENTRY_INVALID;
continue;
}
if (extract_clock(centrino_model->op_points[i].index) != if (extract_clock(centrino_model->op_points[i].index) !=
(centrino_model->op_points[i].frequency)) { (centrino_model->op_points[i].frequency)) {
printk(KERN_DEBUG "Invalid encoded frequency\n"); dprintk("Invalid encoded frequency (%u vs. %u)\n",
extract_clock(centrino_model->op_points[i].index),
centrino_model->op_points[i].frequency);
result = -EINVAL; result = -EINVAL;
goto err_kfree_all; goto err_kfree_all;
} }
if (cur_freq == centrino_model->op_points[i].frequency) if (cur_freq == centrino_model->op_points[i].frequency)
p.state = i; p.state = i;
if (!p.states[i].core_frequency)
centrino_model->op_points[i].frequency = CPUFREQ_ENTRY_INVALID;
} }
/* notify BIOS that we exist */ /* notify BIOS that we exist */
...@@ -439,6 +449,7 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) ...@@ -439,6 +449,7 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy)
kfree(centrino_model); kfree(centrino_model);
err_unreg: err_unreg:
acpi_processor_unregister_performance(&p, policy->cpu); acpi_processor_unregister_performance(&p, policy->cpu);
printk(KERN_INFO PFX "invalid ACPI data\n");
return (result); return (result);
} }
#else #else
...@@ -486,6 +497,7 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) ...@@ -486,6 +497,7 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
if (!(l & (1<<16))) { if (!(l & (1<<16))) {
l |= (1<<16); l |= (1<<16);
dprintk("trying to enable Enhanced SpeedStep (%x)\n", l);
wrmsr(MSR_IA32_MISC_ENABLE, l, h); wrmsr(MSR_IA32_MISC_ENABLE, l, h);
/* check to see if it stuck */ /* check to see if it stuck */
...@@ -502,8 +514,7 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) ...@@ -502,8 +514,7 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
policy->cpuinfo.transition_latency = 10000; /* 10uS transition latency */ policy->cpuinfo.transition_latency = 10000; /* 10uS transition latency */
policy->cur = freq; policy->cur = freq;
dprintk(KERN_INFO PFX "centrino_cpu_init: policy=%d cur=%dkHz\n", dprintk("centrino_cpu_init: cur=%dkHz\n", policy->cur);
policy->policy, policy->cur);
ret = cpufreq_frequency_table_cpuinfo(policy, centrino_model->op_points); ret = cpufreq_frequency_table_cpuinfo(policy, centrino_model->op_points);
if (ret) if (ret)
...@@ -523,6 +534,7 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy) ...@@ -523,6 +534,7 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy)
#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI #ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
if (!centrino_model->model_name) { if (!centrino_model->model_name) {
dprintk("unregistering and freeing ACPI data\n");
acpi_processor_unregister_performance(&p, policy->cpu); acpi_processor_unregister_performance(&p, policy->cpu);
kfree(centrino_model->op_points); kfree(centrino_model->op_points);
kfree(centrino_model); kfree(centrino_model);
...@@ -574,6 +586,7 @@ static int centrino_target (struct cpufreq_policy *policy, ...@@ -574,6 +586,7 @@ static int centrino_target (struct cpufreq_policy *policy,
saved_mask = current->cpus_allowed; saved_mask = current->cpus_allowed;
set_cpus_allowed(current, policy->cpus); set_cpus_allowed(current, policy->cpus);
if (smp_processor_id() != policy->cpu) { if (smp_processor_id() != policy->cpu) {
dprintk("couldn't limit to CPUs in this domain\n");
return(-EAGAIN); return(-EAGAIN);
} }
...@@ -588,26 +601,15 @@ static int centrino_target (struct cpufreq_policy *policy, ...@@ -588,26 +601,15 @@ static int centrino_target (struct cpufreq_policy *policy,
if (msr == (oldmsr & 0xffff)) { if (msr == (oldmsr & 0xffff)) {
retval = 0; retval = 0;
dprintk("no change needed - msr was and needs to be %x\n", oldmsr);
goto migrate_end; goto migrate_end;
} }
/* Hm, old frequency can either be the last value we put in
PERF_CTL, or whatever it is now. The trouble is that TM2
can change it behind our back, which means we never get to
see the speed change. Reading back the current speed would
tell us something happened, but it may leave the things on
the notifier chain confused; we therefore stick to using
the last programmed speed rather than the current speed for
"old".
TODO: work out how the TCC interrupts work, and try to
catch the CPU changing things under us.
*/
freqs.cpu = policy->cpu; freqs.cpu = policy->cpu;
freqs.old = extract_clock(oldmsr); freqs.old = extract_clock(oldmsr);
freqs.new = extract_clock(msr); freqs.new = extract_clock(msr);
dprintk(KERN_INFO PFX "target=%dkHz old=%d new=%d msr=%04x\n", dprintk("target=%dkHz old=%d new=%d msr=%04x\n",
target_freq, freqs.old, freqs.new, msr); target_freq, freqs.old, freqs.new, msr);
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
......
arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
View file @ f3af7498
...@@ -52,16 +52,7 @@ static struct cpufreq_frequency_table speedstep_freqs[] = { ...@@ -52,16 +52,7 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
}; };
/* DEBUG #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-ich", msg)
* Define it if you want verbose debug output, e.g. for bug reporting
*/
//#define SPEEDSTEP_DEBUG
#ifdef SPEEDSTEP_DEBUG
#define dprintk(msg...) printk(msg)
#else
#define dprintk(msg...) do { } while(0)
#endif
/** /**
...@@ -83,13 +74,13 @@ static void speedstep_set_state (unsigned int state) ...@@ -83,13 +74,13 @@ static void speedstep_set_state (unsigned int state)
/* get PMBASE */ /* get PMBASE */
pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase); pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase);
if (!(pmbase & 0x01)) { if (!(pmbase & 0x01)) {
printk(KERN_ERR "cpufreq: could not find speedstep register\n"); printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
return; return;
} }
pmbase &= 0xFFFFFFFE; pmbase &= 0xFFFFFFFE;
if (!pmbase) { if (!pmbase) {
printk(KERN_ERR "cpufreq: could not find speedstep register\n"); printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
return; return;
} }
...@@ -99,13 +90,13 @@ static void speedstep_set_state (unsigned int state) ...@@ -99,13 +90,13 @@ static void speedstep_set_state (unsigned int state)
/* read state */ /* read state */
value = inb(pmbase + 0x50); value = inb(pmbase + 0x50);
dprintk(KERN_DEBUG "cpufreq: read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
/* write new state */ /* write new state */
value &= 0xFE; value &= 0xFE;
value |= state; value |= state;
dprintk(KERN_DEBUG "cpufreq: writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase); dprintk("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase);
/* Disable bus master arbitration */ /* Disable bus master arbitration */
pm2_blk = inb(pmbase + 0x20); pm2_blk = inb(pmbase + 0x20);
...@@ -125,10 +116,10 @@ static void speedstep_set_state (unsigned int state) ...@@ -125,10 +116,10 @@ static void speedstep_set_state (unsigned int state)
/* Enable IRQs */ /* Enable IRQs */
local_irq_restore(flags); local_irq_restore(flags);
dprintk(KERN_DEBUG "cpufreq: read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
if (state == (value & 0x1)) { if (state == (value & 0x1)) {
dprintk (KERN_INFO "cpufreq: change to %u MHz succeeded\n", (speedstep_get_processor_frequency(speedstep_processor) / 1000)); dprintk("change to %u MHz succeeded\n", (speedstep_get_processor_frequency(speedstep_processor) / 1000));
} else { } else {
printk (KERN_ERR "cpufreq: change failed - I/O error\n"); printk (KERN_ERR "cpufreq: change failed - I/O error\n");
} }
...@@ -153,7 +144,7 @@ static int speedstep_activate (void) ...@@ -153,7 +144,7 @@ static int speedstep_activate (void)
pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value); pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value);
if (!(value & 0x08)) { if (!(value & 0x08)) {
value |= 0x08; value |= 0x08;
dprintk(KERN_DEBUG "cpufreq: activating SpeedStep (TM) registers\n"); dprintk("activating SpeedStep (TM) registers\n");
pci_write_config_word(speedstep_chipset_dev, 0x00A0, value); pci_write_config_word(speedstep_chipset_dev, 0x00A0, value);
} }
...@@ -212,7 +203,7 @@ static unsigned int speedstep_detect_chipset (void) ...@@ -212,7 +203,7 @@ static unsigned int speedstep_detect_chipset (void)
pci_read_config_byte(hostbridge, PCI_REVISION_ID, &rev); pci_read_config_byte(hostbridge, PCI_REVISION_ID, &rev);
if (rev < 5) { if (rev < 5) {
dprintk(KERN_INFO "cpufreq: hostbridge does not support speedstep\n"); dprintk("hostbridge does not support speedstep\n");
speedstep_chipset_dev = NULL; speedstep_chipset_dev = NULL;
pci_dev_put(hostbridge); pci_dev_put(hostbridge);
return 0; return 0;
...@@ -234,6 +225,7 @@ static unsigned int _speedstep_get(cpumask_t cpus) ...@@ -234,6 +225,7 @@ static unsigned int _speedstep_get(cpumask_t cpus)
set_cpus_allowed(current, cpus); set_cpus_allowed(current, cpus);
speed = speedstep_get_processor_frequency(speedstep_processor); speed = speedstep_get_processor_frequency(speedstep_processor);
set_cpus_allowed(current, cpus_allowed); set_cpus_allowed(current, cpus_allowed);
dprintk("detected %u kHz as current frequency\n", speed);
return speed; return speed;
} }
...@@ -266,6 +258,8 @@ static int speedstep_target (struct cpufreq_policy *policy, ...@@ -266,6 +258,8 @@ static int speedstep_target (struct cpufreq_policy *policy,
freqs.new = speedstep_freqs[newstate].frequency; freqs.new = speedstep_freqs[newstate].frequency;
freqs.cpu = policy->cpu; freqs.cpu = policy->cpu;
dprintk("transiting from %u to %u kHz\n", freqs.old, freqs.new);
/* no transition necessary */ /* no transition necessary */
if (freqs.old == freqs.new) if (freqs.old == freqs.new)
return 0; return 0;
...@@ -335,7 +329,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) ...@@ -335,7 +329,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
if (!speed) if (!speed)
return -EIO; return -EIO;
dprintk(KERN_INFO "cpufreq: currently at %s speed setting - %i MHz\n", dprintk("currently at %s speed setting - %i MHz\n",
(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high", (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
(speed / 1000)); (speed / 1000));
...@@ -389,12 +383,14 @@ static int __init speedstep_init(void) ...@@ -389,12 +383,14 @@ static int __init speedstep_init(void)
{ {
/* detect processor */ /* detect processor */
speedstep_processor = speedstep_detect_processor(); speedstep_processor = speedstep_detect_processor();
if (!speedstep_processor) if (!speedstep_processor) {
dprintk("Intel(R) SpeedStep(TM) capable processor not found\n");
return -ENODEV; return -ENODEV;
}
/* detect chipset */ /* detect chipset */
if (!speedstep_detect_chipset()) { if (!speedstep_detect_chipset()) {
printk(KERN_INFO "cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available.\n"); dprintk("Intel(R) SpeedStep(TM) for this chipset not (yet) available.\n");
return -ENODEV; return -ENODEV;
} }
......
arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
View file @ f3af7498
...@@ -19,17 +19,7 @@ ...@@ -19,17 +19,7 @@
#include <asm/msr.h> #include <asm/msr.h>
#include "speedstep-lib.h" #include "speedstep-lib.h"
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-lib", msg)
/* DEBUG
* Define it if you want verbose debug output, e.g. for bug reporting
*/
//#define SPEEDSTEP_DEBUG
#ifdef SPEEDSTEP_DEBUG
#define dprintk(msg...) printk(msg)
#else
#define dprintk(msg...) do { } while(0)
#endif
#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK #ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
static int relaxed_check = 0; static int relaxed_check = 0;
...@@ -83,7 +73,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor) ...@@ -83,7 +73,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
/* read MSR 0x2a - we only need the low 32 bits */ /* read MSR 0x2a - we only need the low 32 bits */
rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
dprintk(KERN_DEBUG "speedstep-lib: P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); dprintk("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
msr_tmp = msr_lo; msr_tmp = msr_lo;
/* decode the FSB */ /* decode the FSB */
...@@ -96,9 +86,10 @@ static unsigned int pentium3_get_frequency (unsigned int processor) ...@@ -96,9 +86,10 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
} }
/* decode the multiplier */ /* decode the multiplier */
if (processor == SPEEDSTEP_PROCESSOR_PIII_C_EARLY) if (processor == SPEEDSTEP_PROCESSOR_PIII_C_EARLY) {
dprintk("workaround for early PIIIs\n");
msr_lo &= 0x03c00000; msr_lo &= 0x03c00000;
else } else
msr_lo &= 0x0bc00000; msr_lo &= 0x0bc00000;
msr_lo >>= 22; msr_lo >>= 22;
while (msr_lo != msr_decode_mult[j].bitmap) { while (msr_lo != msr_decode_mult[j].bitmap) {
...@@ -107,6 +98,8 @@ static unsigned int pentium3_get_frequency (unsigned int processor) ...@@ -107,6 +98,8 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
j++; j++;
} }
dprintk("speed is %u\n", (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
return (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100); return (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100);
} }
...@@ -116,7 +109,7 @@ static unsigned int pentiumM_get_frequency(void) ...@@ -116,7 +109,7 @@ static unsigned int pentiumM_get_frequency(void)
u32 msr_lo, msr_tmp; u32 msr_lo, msr_tmp;
rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
dprintk(KERN_DEBUG "speedstep-lib: PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); dprintk("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
/* see table B-2 of 24547212.pdf */ /* see table B-2 of 24547212.pdf */
if (msr_lo & 0x00040000) { if (msr_lo & 0x00040000) {
...@@ -125,7 +118,7 @@ static unsigned int pentiumM_get_frequency(void) ...@@ -125,7 +118,7 @@ static unsigned int pentiumM_get_frequency(void)
} }
msr_tmp = (msr_lo >> 22) & 0x1f; msr_tmp = (msr_lo >> 22) & 0x1f;
dprintk(KERN_DEBUG "speedstep-lib: bits 22-26 are 0x%x\n", msr_tmp); dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * 100 * 1000));
return (msr_tmp * 100 * 1000); return (msr_tmp * 100 * 1000);
} }
...@@ -139,7 +132,7 @@ static unsigned int pentium4_get_frequency(void) ...@@ -139,7 +132,7 @@ static unsigned int pentium4_get_frequency(void)
rdmsr(0x2c, msr_lo, msr_hi); rdmsr(0x2c, msr_lo, msr_hi);
dprintk(KERN_DEBUG "speedstep-lib: P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi); dprintk("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);
/* decode the FSB: see IA-32 Intel (C) Architecture Software /* decode the FSB: see IA-32 Intel (C) Architecture Software
* Developer's Manual, Volume 3: System Prgramming Guide, * Developer's Manual, Volume 3: System Prgramming Guide,
...@@ -169,7 +162,7 @@ static unsigned int pentium4_get_frequency(void) ...@@ -169,7 +162,7 @@ static unsigned int pentium4_get_frequency(void)
/* Multiplier. */ /* Multiplier. */
mult = msr_lo >> 24; mult = msr_lo >> 24;
dprintk(KERN_DEBUG "speedstep-lib: P4 - FSB %u kHz; Multiplier %u\n", fsb, mult); dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", fsb, mult, (fsb * mult));
return (fsb * mult); return (fsb * mult);
} }
...@@ -204,6 +197,8 @@ unsigned int speedstep_detect_processor (void) ...@@ -204,6 +197,8 @@ unsigned int speedstep_detect_processor (void)
struct cpuinfo_x86 *c = cpu_data; struct cpuinfo_x86 *c = cpu_data;
u32 ebx, msr_lo, msr_hi; u32 ebx, msr_lo, msr_hi;
dprintk("x86: %x, model: %x\n", c->x86, c->x86_model);
if ((c->x86_vendor != X86_VENDOR_INTEL) || if ((c->x86_vendor != X86_VENDOR_INTEL) ||
((c->x86 != 6) && (c->x86 != 0xF))) ((c->x86 != 6) && (c->x86 != 0xF)))
return 0; return 0;
...@@ -217,7 +212,7 @@ unsigned int speedstep_detect_processor (void) ...@@ -217,7 +212,7 @@ unsigned int speedstep_detect_processor (void)
ebx = cpuid_ebx(0x00000001); ebx = cpuid_ebx(0x00000001);
ebx &= 0x000000FF; ebx &= 0x000000FF;
dprintk(KERN_INFO "ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask); dprintk("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask);
switch (c->x86_mask) { switch (c->x86_mask) {
case 4: case 4:
...@@ -269,6 +264,7 @@ unsigned int speedstep_detect_processor (void) ...@@ -269,6 +264,7 @@ unsigned int speedstep_detect_processor (void)
/* cpuid_ebx(1) is 0x04 for desktop PIII, /* cpuid_ebx(1) is 0x04 for desktop PIII,
0x06 for mobile PIII-M */ 0x06 for mobile PIII-M */
ebx = cpuid_ebx(0x00000001); ebx = cpuid_ebx(0x00000001);
dprintk("ebx is %x\n", ebx);
ebx &= 0x000000FF; ebx &= 0x000000FF;
...@@ -286,7 +282,7 @@ unsigned int speedstep_detect_processor (void) ...@@ -286,7 +282,7 @@ unsigned int speedstep_detect_processor (void)
/* all mobile PIII Coppermines have FSB 100 MHz /* all mobile PIII Coppermines have FSB 100 MHz
* ==> sort out a few desktop PIIIs. */ * ==> sort out a few desktop PIIIs. */
rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi); rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
dprintk(KERN_DEBUG "cpufreq: Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", msr_lo, msr_hi); dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", msr_lo, msr_hi);
msr_lo &= 0x00c0000; msr_lo &= 0x00c0000;
if (msr_lo != 0x0080000) if (msr_lo != 0x0080000)
return 0; return 0;
...@@ -298,11 +294,12 @@ unsigned int speedstep_detect_processor (void) ...@@ -298,11 +294,12 @@ unsigned int speedstep_detect_processor (void)
* bit 56 or 57 is set * bit 56 or 57 is set
*/ */
rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi); rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
dprintk(KERN_DEBUG "cpufreq: Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", msr_lo, msr_hi); dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", msr_lo, msr_hi);
if ((msr_hi & (1<<18)) && (relaxed_check ? 1 : (msr_hi & (3<<24)))) { if ((msr_hi & (1<<18)) && (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
if (c->x86_mask == 0x01) if (c->x86_mask == 0x01) {
dprintk("early PIII version\n");
return SPEEDSTEP_PROCESSOR_PIII_C_EARLY; return SPEEDSTEP_PROCESSOR_PIII_C_EARLY;
else } else
return SPEEDSTEP_PROCESSOR_PIII_C; return SPEEDSTEP_PROCESSOR_PIII_C;
} }
...@@ -329,11 +326,15 @@ unsigned int speedstep_get_freqs(unsigned int processor, ...@@ -329,11 +326,15 @@ unsigned int speedstep_get_freqs(unsigned int processor,
if ((!processor) || (!low_speed) || (!high_speed) || (!set_state)) if ((!processor) || (!low_speed) || (!high_speed) || (!set_state))
return -EINVAL; return -EINVAL;
dprintk("trying to determine both speeds\n");
/* get current speed */ /* get current speed */
prev_speed = speedstep_get_processor_frequency(processor); prev_speed = speedstep_get_processor_frequency(processor);
if (!prev_speed) if (!prev_speed)
return -EIO; return -EIO;
dprintk("previous seped is %u\n", prev_speed);
local_irq_save(flags); local_irq_save(flags);
/* switch to low state */ /* switch to low state */
...@@ -344,6 +345,8 @@ unsigned int speedstep_get_freqs(unsigned int processor, ...@@ -344,6 +345,8 @@ unsigned int speedstep_get_freqs(unsigned int processor,
goto out; goto out;
} }
dprintk("low seped is %u\n", *low_speed);
/* switch to high state */ /* switch to high state */
set_state(SPEEDSTEP_HIGH); set_state(SPEEDSTEP_HIGH);
*high_speed = speedstep_get_processor_frequency(processor); *high_speed = speedstep_get_processor_frequency(processor);
...@@ -352,6 +355,8 @@ unsigned int speedstep_get_freqs(unsigned int processor, ...@@ -352,6 +355,8 @@ unsigned int speedstep_get_freqs(unsigned int processor,
goto out; goto out;
} }
dprintk("high seped is %u\n", *high_speed);
if (*low_speed == *high_speed) { if (*low_speed == *high_speed) {
ret = -ENODEV; ret = -ENODEV;
goto out; goto out;
......
arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
View file @ f3af7498
...@@ -24,8 +24,6 @@ ...@@ -24,8 +24,6 @@
#include "speedstep-lib.h" #include "speedstep-lib.h"
#define PFX "speedstep-smi: "
/* speedstep system management interface port/command. /* speedstep system management interface port/command.
* *
* These parameters are got from IST-SMI BIOS call. * These parameters are got from IST-SMI BIOS call.
...@@ -58,16 +56,7 @@ static struct cpufreq_frequency_table speedstep_freqs[] = { ...@@ -58,16 +56,7 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
* of DMA activity going on? */ * of DMA activity going on? */
#define SMI_TRIES 5 #define SMI_TRIES 5
/* DEBUG #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-smi", msg)
* Define it if you want verbose debug output, e.g. for bug reporting
*/
//#define SPEEDSTEP_DEBUG
#ifdef SPEEDSTEP_DEBUG
#define dprintk(msg...) printk(msg)
#else
#define dprintk(msg...) do { } while(0)
#endif
/** /**
* speedstep_smi_ownership * speedstep_smi_ownership
...@@ -81,12 +70,16 @@ static int speedstep_smi_ownership (void) ...@@ -81,12 +70,16 @@ static int speedstep_smi_ownership (void)
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
magic = virt_to_phys(magic_data); magic = virt_to_phys(magic_data);
dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port);
__asm__ __volatile__( __asm__ __volatile__(
"out %%al, (%%dx)\n" "out %%al, (%%dx)\n"
: "=D" (result) : "=D" (result)
: "a" (command), "b" (function), "c" (0), "d" (smi_port), "D" (0), "S" (magic) : "a" (command), "b" (function), "c" (0), "d" (smi_port), "D" (0), "S" (magic)
); );
dprintk("result is %x\n", result);
return result; return result;
} }
...@@ -101,21 +94,27 @@ static int speedstep_smi_ownership (void) ...@@ -101,21 +94,27 @@ static int speedstep_smi_ownership (void)
*/ */
static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
{ {
u32 command, result, edi, high_mhz, low_mhz; u32 command, result = 0, edi, high_mhz, low_mhz;
u32 state=0; u32 state=0;
u32 function = GET_SPEEDSTEP_FREQS; u32 function = GET_SPEEDSTEP_FREQS;
if (!(ist_info.event & 0xFFFF)) if (!(ist_info.event & 0xFFFF)) {
dprintk("bug #1422 -- can't read freqs from BIOS\n", result);
return -ENODEV; return -ENODEV;
}
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port);
__asm__ __volatile__("movl $0, %%edi\n" __asm__ __volatile__("movl $0, %%edi\n"
"out %%al, (%%dx)\n" "out %%al, (%%dx)\n"
: "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi) : "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi)
: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0) : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
); );
dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz);
/* abort if results are obviously incorrect... */ /* abort if results are obviously incorrect... */
if ((high_mhz + low_mhz) < 600) if ((high_mhz + low_mhz) < 600)
return -EINVAL; return -EINVAL;
...@@ -138,15 +137,20 @@ static int speedstep_get_state (void) ...@@ -138,15 +137,20 @@ static int speedstep_get_state (void)
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port);
__asm__ __volatile__("movl $0, %%edi\n" __asm__ __volatile__("movl $0, %%edi\n"
"out %%al, (%%dx)\n" "out %%al, (%%dx)\n"
: "=a" (result), "=b" (state), "=D" (edi) : "=a" (result), "=b" (state), "=D" (edi)
: "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0) : "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0)
); );
dprintk("state is %x, result is %x\n", state, result);
return (state & 1); return (state & 1);
} }
/** /**
* speedstep_set_state - set the SpeedStep state * speedstep_set_state - set the SpeedStep state
* @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
...@@ -167,9 +171,11 @@ static void speedstep_set_state (unsigned int state) ...@@ -167,9 +171,11 @@ static void speedstep_set_state (unsigned int state)
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
dprintk("trying to set frequency to state %u with command %x at port %x\n", state, command, smi_port);
do { do {
if (retry) { if (retry) {
dprintk(KERN_INFO "cpufreq: retry %u, previous result %u\n", retry, result); dprintk("retry %u, previous result %u, waiting...\n", retry, result);
mdelay(retry * 50); mdelay(retry * 50);
} }
retry++; retry++;
...@@ -185,7 +191,7 @@ static void speedstep_set_state (unsigned int state) ...@@ -185,7 +191,7 @@ static void speedstep_set_state (unsigned int state)
local_irq_restore(flags); local_irq_restore(flags);
if (new_state == state) { if (new_state == state) {
dprintk(KERN_INFO "cpufreq: change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result); dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result);
} else { } else {
printk(KERN_ERR "cpufreq: change failed with new_state %u and result %u\n", new_state, result); printk(KERN_ERR "cpufreq: change failed with new_state %u and result %u\n", new_state, result);
} }
...@@ -250,7 +256,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) ...@@ -250,7 +256,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
result = speedstep_smi_ownership(); result = speedstep_smi_ownership();
if (result) { if (result) {
dprintk(KERN_INFO "cpufreq: fails an aquiring ownership of a SMI interface.\n"); dprintk("fails in aquiring ownership of a SMI interface.\n");
return -EINVAL; return -EINVAL;
} }
...@@ -259,24 +265,24 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) ...@@ -259,24 +265,24 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
&speedstep_freqs[SPEEDSTEP_HIGH].frequency); &speedstep_freqs[SPEEDSTEP_HIGH].frequency);
if (result) { if (result) {
/* fall back to speedstep_lib.c dection mechanism: try both states out */ /* fall back to speedstep_lib.c dection mechanism: try both states out */
dprintk(KERN_INFO PFX "could not detect low and high frequencies by SMI call.\n"); dprintk("could not detect low and high frequencies by SMI call.\n");
result = speedstep_get_freqs(speedstep_processor, result = speedstep_get_freqs(speedstep_processor,
&speedstep_freqs[SPEEDSTEP_LOW].frequency, &speedstep_freqs[SPEEDSTEP_LOW].frequency,
&speedstep_freqs[SPEEDSTEP_HIGH].frequency, &speedstep_freqs[SPEEDSTEP_HIGH].frequency,
&speedstep_set_state); &speedstep_set_state);
if (result) { if (result) {
dprintk(KERN_INFO PFX "could not detect two different speeds -- aborting.\n"); dprintk("could not detect two different speeds -- aborting.\n");
return result; return result;
} else } else
dprintk(KERN_INFO PFX "workaround worked.\n"); dprintk("workaround worked.\n");
} }
/* get current speed setting */ /* get current speed setting */
state = speedstep_get_state(); state = speedstep_get_state();
speed = speedstep_freqs[state].frequency; speed = speedstep_freqs[state].frequency;
dprintk(KERN_INFO "cpufreq: currently at %s speed setting - %i MHz\n", dprintk("currently at %s speed setting - %i MHz\n",
(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high", (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
(speed / 1000)); (speed / 1000));
...@@ -313,7 +319,7 @@ static int speedstep_resume(struct cpufreq_policy *policy) ...@@ -313,7 +319,7 @@ static int speedstep_resume(struct cpufreq_policy *policy)
int result = speedstep_smi_ownership(); int result = speedstep_smi_ownership();
if (result) if (result)
dprintk(KERN_INFO "cpufreq: fails an aquiring ownership of a SMI interface.\n"); dprintk("fails in re-aquiring ownership of a SMI interface.\n");
return result; return result;
} }
...@@ -356,11 +362,11 @@ static int __init speedstep_init(void) ...@@ -356,11 +362,11 @@ static int __init speedstep_init(void)
} }
if (!speedstep_processor) { if (!speedstep_processor) {
dprintk (KERN_INFO PFX "No supported Intel CPU detected.\n"); dprintk ("No supported Intel CPU detected.\n");
return -ENODEV; return -ENODEV;
} }
dprintk(KERN_DEBUG PFX "signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n", dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n",
ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level); ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level);
......
arch/ppc/Kconfig
View file @ f3af7498
...@@ -189,18 +189,6 @@ config MATH_EMULATION ...@@ -189,18 +189,6 @@ config MATH_EMULATION
here. Saying Y here will not hurt performance (on any machine) but here. Saying Y here will not hurt performance (on any machine) but
will increase the size of the kernel. will increase the size of the kernel.
config CPU_FREQ
bool "CPU Frequency scaling"
help
Clock scaling allows you to change the clock speed of CPUs on the
fly. This is a nice method to save battery power on notebooks,
because the lower the clock speed, the less power the CPU consumes.
For more information, take a look at <file:Documentation/cpu-freq> or
at <http://www.brodo.de/cpufreq/>
If in doubt, say N.
source "drivers/cpufreq/Kconfig" source "drivers/cpufreq/Kconfig"
config CPU_FREQ_PMAC config CPU_FREQ_PMAC
......
arch/sh/Kconfig
View file @ f3af7498
...@@ -645,16 +645,6 @@ config SH_PCLK_FREQ ...@@ -645,16 +645,6 @@ config SH_PCLK_FREQ
menu "CPU Frequency scaling" menu "CPU Frequency scaling"
config CPU_FREQ
bool "CPU Frequency scaling"
help
CPU clock scaling allows you to change the clock speed of the
running CPU on the fly.
For details, take a look at <file:Documentation/cpu-freq>.
If unsure, say N.
source "drivers/cpufreq/Kconfig" source "drivers/cpufreq/Kconfig"
config CPU_FREQ_TABLE config CPU_FREQ_TABLE
......
arch/sparc64/Kconfig
View file @ f3af7498
...@@ -135,16 +135,7 @@ config NR_CPUS ...@@ -135,16 +135,7 @@ config NR_CPUS
depends on SMP depends on SMP
default "32" default "32"
config CPU_FREQ source "drivers/cpufreq/Kconfig"
bool "CPU Frequency scaling"
help
Clock scaling allows you to change the clock speed of CPUs on the
fly. Currently there are only sparc64 drivers for UltraSPARC-III
and UltraSPARC-IIe processors.
For details, take a look at <file:Documentation/cpu-freq>.
If in doubt, say N.
config CPU_FREQ_TABLE config CPU_FREQ_TABLE
tristate "CPU frequency table helpers" tristate "CPU frequency table helpers"
...@@ -176,8 +167,6 @@ config US2E_FREQ ...@@ -176,8 +167,6 @@ config US2E_FREQ
If in doubt, say N. If in doubt, say N.
source "drivers/cpufreq/Kconfig"
# Identify this as a Sparc64 build # Identify this as a Sparc64 build
config SPARC64 config SPARC64
bool bool
......
arch/x86_64/kernel/cpufreq/Kconfig
View file @ f3af7498
...@@ -4,18 +4,6 @@ ...@@ -4,18 +4,6 @@
menu "CPU Frequency scaling" menu "CPU Frequency scaling"
config CPU_FREQ
bool "CPU Frequency scaling"
help
Clock scaling allows you to change the clock speed of CPUs on the
fly. This is a nice method to save battery power on notebooks,
because the lower the clock speed, the less power the CPU consumes.
For more information, take a look at <file:Documentation/cpu-freq/>
or at <http://www.codemonkey.org.uk/projects/cpufreq/>
If in doubt, say N.
source "drivers/cpufreq/Kconfig" source "drivers/cpufreq/Kconfig"
config CPU_FREQ_TABLE config CPU_FREQ_TABLE
......
arch/x86_64/kernel/cpufreq/Makefile
View file @ f3af7498
...@@ -6,12 +6,12 @@ SRCDIR := ../../../i386/kernel/cpu/cpufreq ...@@ -6,12 +6,12 @@ SRCDIR := ../../../i386/kernel/cpu/cpufreq
obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o
obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi.o obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o
obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o
powernow-k8-objs := ${SRCDIR}/powernow-k8.o powernow-k8-objs := ${SRCDIR}/powernow-k8.o
speedstep-centrino-objs := ${SRCDIR}/speedstep-centrino.o speedstep-centrino-objs := ${SRCDIR}/speedstep-centrino.o
acpi-objs := ${SRCDIR}/acpi.o acpi-cpufreq-objs := ${SRCDIR}/acpi-cpufreq.o
p4-clockmod-objs := ${SRCDIR}/p4-clockmod.o p4-clockmod-objs := ${SRCDIR}/p4-clockmod.o
speedstep-lib-objs := ${SRCDIR}/speedstep-lib.o speedstep-lib-objs := ${SRCDIR}/speedstep-lib.o
drivers/cpufreq/Kconfig
View file @ f3af7498
config CPU_FREQ
bool "CPU Frequency scaling"
help
CPU Frequency scaling allows you to change the clock speed of
CPUs on the fly. This is a nice method to save power, because
the lower the CPU clock speed, the less power the CPU consumes.
Note that this driver doesn't automatically change the CPU
clock speed, you need to either enable a dynamic cpufreq governor
(see below) after boot, or use a userspace tool.
For details, take a look at <file:Documentation/cpu-freq>.
If in doubt, say N.
config CPU_FREQ_DEBUG
bool "Enable CPUfreq debugging"
depends on CPU_FREQ
help
Say Y here to enable CPUfreq subsystem (including drivers)
debugging. You will need to activate it via the kernel
command line by passing
cpufreq.debug=<value>
To get <value>, add
1 to activate CPUfreq core debugging,
2 to activate CPUfreq drivers debugging, and
4 to activate CPUfreq governor debugging
config CPU_FREQ_PROC_INTF config CPU_FREQ_PROC_INTF
tristate "/proc/cpufreq interface (deprecated)" tristate "/proc/cpufreq interface (deprecated)"
depends on CPU_FREQ && PROC_FS depends on CPU_FREQ && PROC_FS
......
drivers/cpufreq/cpufreq.c
View file @ f3af7498
This diff is collapsed.
drivers/cpufreq/cpufreq_ondemand.c
View file @ f3af7498
...@@ -10,7 +10,6 @@ ...@@ -10,7 +10,6 @@
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
#include <linux/config.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/module.h> #include <linux/module.h>
#include <linux/smp.h> #include <linux/smp.h>
...@@ -26,7 +25,6 @@ ...@@ -26,7 +25,6 @@
#include <linux/kmod.h> #include <linux/kmod.h>
#include <linux/workqueue.h> #include <linux/workqueue.h>
#include <linux/jiffies.h> #include <linux/jiffies.h>
#include <linux/config.h>
#include <linux/kernel_stat.h> #include <linux/kernel_stat.h>
#include <linux/percpu.h> #include <linux/percpu.h>
...@@ -83,7 +81,7 @@ struct dbs_tuners { ...@@ -83,7 +81,7 @@ struct dbs_tuners {
unsigned int down_threshold; unsigned int down_threshold;
}; };
struct dbs_tuners dbs_tuners_ins = { static struct dbs_tuners dbs_tuners_ins = {
.up_threshold = DEF_FREQUENCY_UP_THRESHOLD, .up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
.down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD, .down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD,
.sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR, .sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR,
...@@ -101,10 +99,8 @@ static ssize_t show_sampling_rate_min(struct cpufreq_policy *policy, char *buf) ...@@ -101,10 +99,8 @@ static ssize_t show_sampling_rate_min(struct cpufreq_policy *policy, char *buf)
} }
#define define_one_ro(_name) \ #define define_one_ro(_name) \
static struct freq_attr _name = { \ static struct freq_attr _name = \
.attr = { .name = __stringify(_name), .mode = 0444 }, \ __ATTR(_name, 0444, show_##_name, NULL)
.show = show_##_name, \
}
define_one_ro(sampling_rate_max); define_one_ro(sampling_rate_max);
define_one_ro(sampling_rate_min); define_one_ro(sampling_rate_min);
...@@ -127,13 +123,13 @@ static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused, ...@@ -127,13 +123,13 @@ static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused,
unsigned int input; unsigned int input;
int ret; int ret;
ret = sscanf (buf, "%u", &input); ret = sscanf (buf, "%u", &input);
down(&dbs_sem);
if (ret != 1 ) if (ret != 1 )
goto out; return -EINVAL;
down(&dbs_sem);
dbs_tuners_ins.sampling_down_factor = input; dbs_tuners_ins.sampling_down_factor = input;
out:
up(&dbs_sem); up(&dbs_sem);
return count; return count;
} }
...@@ -143,13 +139,16 @@ static ssize_t store_sampling_rate(struct cpufreq_policy *unused, ...@@ -143,13 +139,16 @@ static ssize_t store_sampling_rate(struct cpufreq_policy *unused,
unsigned int input; unsigned int input;
int ret; int ret;
ret = sscanf (buf, "%u", &input); ret = sscanf (buf, "%u", &input);
down(&dbs_sem); down(&dbs_sem);
if (ret != 1 || input > MAX_SAMPLING_RATE || input < MIN_SAMPLING_RATE) if (ret != 1 || input > MAX_SAMPLING_RATE || input < MIN_SAMPLING_RATE) {
goto out; up(&dbs_sem);
return -EINVAL;
}
dbs_tuners_ins.sampling_rate = input; dbs_tuners_ins.sampling_rate = input;
out:
up(&dbs_sem); up(&dbs_sem);
return count; return count;
} }
...@@ -159,15 +158,18 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused, ...@@ -159,15 +158,18 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused,
unsigned int input; unsigned int input;
int ret; int ret;
ret = sscanf (buf, "%u", &input); ret = sscanf (buf, "%u", &input);
down(&dbs_sem); down(&dbs_sem);
if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD || if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD ||
input < MIN_FREQUENCY_UP_THRESHOLD || input < MIN_FREQUENCY_UP_THRESHOLD ||
input <= dbs_tuners_ins.down_threshold) input <= dbs_tuners_ins.down_threshold) {
goto out; up(&dbs_sem);
return -EINVAL;
}
dbs_tuners_ins.up_threshold = input; dbs_tuners_ins.up_threshold = input;
out:
up(&dbs_sem); up(&dbs_sem);
return count; return count;
} }
...@@ -177,24 +179,24 @@ static ssize_t store_down_threshold(struct cpufreq_policy *unused, ...@@ -177,24 +179,24 @@ static ssize_t store_down_threshold(struct cpufreq_policy *unused,
unsigned int input; unsigned int input;
int ret; int ret;
ret = sscanf (buf, "%u", &input); ret = sscanf (buf, "%u", &input);
down(&dbs_sem); down(&dbs_sem);
if (ret != 1 || input > MAX_FREQUENCY_DOWN_THRESHOLD || if (ret != 1 || input > MAX_FREQUENCY_DOWN_THRESHOLD ||
input < MIN_FREQUENCY_DOWN_THRESHOLD || input < MIN_FREQUENCY_DOWN_THRESHOLD ||
input >= dbs_tuners_ins.up_threshold) input >= dbs_tuners_ins.up_threshold) {
goto out; up(&dbs_sem);
return -EINVAL;
}
dbs_tuners_ins.down_threshold = input; dbs_tuners_ins.down_threshold = input;
out:
up(&dbs_sem); up(&dbs_sem);
return count; return count;
} }
#define define_one_rw(_name) \ #define define_one_rw(_name) \
static struct freq_attr _name = { \ static struct freq_attr _name = \
.attr = { .name = __stringify(_name), .mode = 0644 }, \ __ATTR(_name, 0644, show_##_name, store_##_name)
.show = show_##_name, \
.store = store_##_name, \
}
define_one_rw(sampling_rate); define_one_rw(sampling_rate);
define_one_rw(sampling_down_factor); define_one_rw(sampling_down_factor);
......
drivers/cpufreq/cpufreq_performance.c
View file @ f3af7498
...@@ -15,12 +15,16 @@ ...@@ -15,12 +15,16 @@
#include <linux/cpufreq.h> #include <linux/cpufreq.h>
#include <linux/init.h> #include <linux/init.h>
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "performance", msg)
static int cpufreq_governor_performance(struct cpufreq_policy *policy, static int cpufreq_governor_performance(struct cpufreq_policy *policy,
unsigned int event) unsigned int event)
{ {
switch (event) { switch (event) {
case CPUFREQ_GOV_START: case CPUFREQ_GOV_START:
case CPUFREQ_GOV_LIMITS: case CPUFREQ_GOV_LIMITS:
dprintk("setting to %u kHz because of event %u\n", policy->max, event);
__cpufreq_driver_target(policy, policy->max, CPUFREQ_RELATION_H); __cpufreq_driver_target(policy, policy->max, CPUFREQ_RELATION_H);
break; break;
default: default:
......
drivers/cpufreq/cpufreq_powersave.c
View file @ f3af7498
...@@ -15,12 +15,15 @@ ...@@ -15,12 +15,15 @@
#include <linux/cpufreq.h> #include <linux/cpufreq.h>
#include <linux/init.h> #include <linux/init.h>
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "powersave", msg)
static int cpufreq_governor_powersave(struct cpufreq_policy *policy, static int cpufreq_governor_powersave(struct cpufreq_policy *policy,
unsigned int event) unsigned int event)
{ {
switch (event) { switch (event) {
case CPUFREQ_GOV_START: case CPUFREQ_GOV_START:
case CPUFREQ_GOV_LIMITS: case CPUFREQ_GOV_LIMITS:
dprintk("setting to %u kHz because of event %u\n", policy->min, event);
__cpufreq_driver_target(policy, policy->min, CPUFREQ_RELATION_L); __cpufreq_driver_target(policy, policy->min, CPUFREQ_RELATION_L);
break; break;
default: default:
......
drivers/cpufreq/cpufreq_userspace.c
View file @ f3af7498
...@@ -68,12 +68,14 @@ ...@@ -68,12 +68,14 @@
*/ */
static unsigned int cpu_max_freq[NR_CPUS]; static unsigned int cpu_max_freq[NR_CPUS];
static unsigned int cpu_min_freq[NR_CPUS]; static unsigned int cpu_min_freq[NR_CPUS];
static unsigned int cpu_cur_freq[NR_CPUS]; static unsigned int cpu_cur_freq[NR_CPUS]; /* current CPU freq */
static unsigned int cpu_set_freq[NR_CPUS]; /* CPU freq desired by userspace */
static unsigned int cpu_is_managed[NR_CPUS]; static unsigned int cpu_is_managed[NR_CPUS];
static struct cpufreq_policy current_policy[NR_CPUS]; static struct cpufreq_policy current_policy[NR_CPUS];
static DECLARE_MUTEX (userspace_sem); static DECLARE_MUTEX (userspace_sem);
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "userspace", msg)
/* keep track of frequency transitions */ /* keep track of frequency transitions */
static int static int
...@@ -82,13 +84,7 @@ userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val, ...@@ -82,13 +84,7 @@ userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
{ {
struct cpufreq_freqs *freq = data; struct cpufreq_freqs *freq = data;
/* Don't update cur_freq if CPU is managed and we're dprintk("saving cpu_cur_freq of cpu %u to be %u kHz\n", freq->cpu, freq->new);
* waking up: else we won't remember what frequency
* we need to set the CPU to.
*/
if (cpu_is_managed[freq->cpu] && (val == CPUFREQ_RESUMECHANGE))
return 0;
cpu_cur_freq[freq->cpu] = freq->new; cpu_cur_freq[freq->cpu] = freq->new;
return 0; return 0;
...@@ -100,20 +96,24 @@ static struct notifier_block userspace_cpufreq_notifier_block = { ...@@ -100,20 +96,24 @@ static struct notifier_block userspace_cpufreq_notifier_block = {
/** /**
* cpufreq_set - set the CPU frequency * _cpufreq_set - set the CPU frequency
* @freq: target frequency in kHz * @freq: target frequency in kHz
* @cpu: CPU for which the frequency is to be set * @cpu: CPU for which the frequency is to be set
* *
* Sets the CPU frequency to freq. * Sets the CPU frequency to freq.
*/ */
int cpufreq_set(unsigned int freq, unsigned int cpu) static int _cpufreq_set(unsigned int freq, unsigned int cpu)
{ {
int ret = -EINVAL; int ret = -EINVAL;
dprintk("_cpufreq_set for cpu %u, freq %u kHz\n", cpu, freq);
down(&userspace_sem); down(&userspace_sem);
if (!cpu_is_managed[cpu]) if (!cpu_is_managed[cpu])
goto err; goto err;
cpu_set_freq[cpu] = freq;
if (freq < cpu_min_freq[cpu]) if (freq < cpu_min_freq[cpu])
freq = cpu_min_freq[cpu]; freq = cpu_min_freq[cpu];
if (freq > cpu_max_freq[cpu]) if (freq > cpu_max_freq[cpu])
...@@ -133,6 +133,18 @@ int cpufreq_set(unsigned int freq, unsigned int cpu) ...@@ -133,6 +133,18 @@ int cpufreq_set(unsigned int freq, unsigned int cpu)
up(&userspace_sem); up(&userspace_sem);
return ret; return ret;
} }
#ifdef CONFIG_CPU_FREQ_24_API
#warning The /proc/sys/cpu/ and sysctl interface to cpufreq will be removed from the 2.6. kernel series soon after 2005-01-01
static unsigned int warning_print = 0;
int __deprecated cpufreq_set(unsigned int freq, unsigned int cpu)
{
return _cpufreq_set(freq, cpu);
}
EXPORT_SYMBOL_GPL(cpufreq_set); EXPORT_SYMBOL_GPL(cpufreq_set);
...@@ -143,21 +155,14 @@ EXPORT_SYMBOL_GPL(cpufreq_set); ...@@ -143,21 +155,14 @@ EXPORT_SYMBOL_GPL(cpufreq_set);
* Sets the CPU frequency to the maximum frequency supported by * Sets the CPU frequency to the maximum frequency supported by
* this CPU. * this CPU.
*/ */
int cpufreq_setmax(unsigned int cpu) int __deprecated cpufreq_setmax(unsigned int cpu)
{ {
if (!cpu_is_managed[cpu] || !cpu_online(cpu)) if (!cpu_is_managed[cpu] || !cpu_online(cpu))
return -EINVAL; return -EINVAL;
return cpufreq_set(cpu_max_freq[cpu], cpu); return _cpufreq_set(cpu_max_freq[cpu], cpu);
} }
EXPORT_SYMBOL_GPL(cpufreq_setmax); EXPORT_SYMBOL_GPL(cpufreq_setmax);
#ifdef CONFIG_CPU_FREQ_24_API
#warning The /proc/sys/cpu/ and sysctl interface to cpufreq will be removed from the 2.6. kernel series soon after 2005-01-01
static unsigned int warning_print = 0;
/*********************** cpufreq_sysctl interface ********************/ /*********************** cpufreq_sysctl interface ********************/
static int static int
cpufreq_procctl(ctl_table *ctl, int write, struct file *filp, cpufreq_procctl(ctl_table *ctl, int write, struct file *filp,
...@@ -190,7 +195,7 @@ cpufreq_procctl(ctl_table *ctl, int write, struct file *filp, ...@@ -190,7 +195,7 @@ cpufreq_procctl(ctl_table *ctl, int write, struct file *filp,
buf[sizeof(buf) - 1] = '\0'; buf[sizeof(buf) - 1] = '\0';
freq = simple_strtoul(buf, &p, 0); freq = simple_strtoul(buf, &p, 0);
cpufreq_set(freq, cpu); _cpufreq_set(freq, cpu);
} else { } else {
len = sprintf(buf, "%d\n", cpufreq_get(cpu)); len = sprintf(buf, "%d\n", cpufreq_get(cpu));
if (len > left) if (len > left)
...@@ -243,7 +248,7 @@ cpufreq_sysctl(ctl_table *table, int __user *name, int nlen, ...@@ -243,7 +248,7 @@ cpufreq_sysctl(ctl_table *table, int __user *name, int nlen,
if (get_user(freq, (unsigned int __user *)newval)) if (get_user(freq, (unsigned int __user *)newval))
return -EFAULT; return -EFAULT;
cpufreq_set(freq, cpu); _cpufreq_set(freq, cpu);
} }
return 1; return 1;
} }
...@@ -464,7 +469,7 @@ static ctl_table ctl_cpu[2] = { ...@@ -464,7 +469,7 @@ static ctl_table ctl_cpu[2] = {
} }
}; };
struct ctl_table_header *cpufreq_sysctl_table; static struct ctl_table_header *cpufreq_sysctl_table;
static inline void cpufreq_sysctl_init(void) static inline void cpufreq_sysctl_init(void)
{ {
...@@ -498,13 +503,14 @@ store_speed (struct cpufreq_policy *policy, const char *buf, size_t count) ...@@ -498,13 +503,14 @@ store_speed (struct cpufreq_policy *policy, const char *buf, size_t count)
if (ret != 1) if (ret != 1)
return -EINVAL; return -EINVAL;
cpufreq_set(freq, policy->cpu); _cpufreq_set(freq, policy->cpu);
return count; return count;
} }
static struct freq_attr freq_attr_scaling_setspeed = { static struct freq_attr freq_attr_scaling_setspeed =
.attr = { .name = "scaling_setspeed", .mode = 0644 }, {
.attr = { .name = "scaling_setspeed", .mode = 0644, .owner = THIS_MODULE },
.show = show_speed, .show = show_speed,
.store = store_speed, .store = store_speed,
}; };
...@@ -523,8 +529,10 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy, ...@@ -523,8 +529,10 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
cpu_min_freq[cpu] = policy->min; cpu_min_freq[cpu] = policy->min;
cpu_max_freq[cpu] = policy->max; cpu_max_freq[cpu] = policy->max;
cpu_cur_freq[cpu] = policy->cur; cpu_cur_freq[cpu] = policy->cur;
cpu_set_freq[cpu] = policy->cur;
sysfs_create_file (&policy->kobj, &freq_attr_scaling_setspeed.attr); sysfs_create_file (&policy->kobj, &freq_attr_scaling_setspeed.attr);
memcpy (&current_policy[cpu], policy, sizeof(struct cpufreq_policy)); memcpy (&current_policy[cpu], policy, sizeof(struct cpufreq_policy));
dprintk("managing cpu %u started (%u - %u kHz, currently %u kHz)\n", cpu, cpu_min_freq[cpu], cpu_max_freq[cpu], cpu_cur_freq[cpu]);
up(&userspace_sem); up(&userspace_sem);
break; break;
case CPUFREQ_GOV_STOP: case CPUFREQ_GOV_STOP:
...@@ -532,22 +540,26 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy, ...@@ -532,22 +540,26 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
cpu_is_managed[cpu] = 0; cpu_is_managed[cpu] = 0;
cpu_min_freq[cpu] = 0; cpu_min_freq[cpu] = 0;
cpu_max_freq[cpu] = 0; cpu_max_freq[cpu] = 0;
cpu_set_freq[cpu] = 0;
sysfs_remove_file (&policy->kobj, &freq_attr_scaling_setspeed.attr); sysfs_remove_file (&policy->kobj, &freq_attr_scaling_setspeed.attr);
dprintk("managing cpu %u stopped\n", cpu);
up(&userspace_sem); up(&userspace_sem);
break; break;
case CPUFREQ_GOV_LIMITS: case CPUFREQ_GOV_LIMITS:
down(&userspace_sem); down(&userspace_sem);
cpu_min_freq[cpu] = policy->min; cpu_min_freq[cpu] = policy->min;
cpu_max_freq[cpu] = policy->max; cpu_max_freq[cpu] = policy->max;
if (policy->max < cpu_cur_freq[cpu]) dprintk("limit event for cpu %u: %u - %u kHz, currently %u kHz, last set to %u kHz\n", cpu, cpu_min_freq[cpu], cpu_max_freq[cpu], cpu_cur_freq[cpu], cpu_set_freq[cpu]);
if (policy->max < cpu_set_freq[cpu]) {
__cpufreq_driver_target(&current_policy[cpu], policy->max, __cpufreq_driver_target(&current_policy[cpu], policy->max,
CPUFREQ_RELATION_H); CPUFREQ_RELATION_H);
else if (policy->min > cpu_cur_freq[cpu]) } else if (policy->min > cpu_set_freq[cpu]) {
__cpufreq_driver_target(&current_policy[cpu], policy->min, __cpufreq_driver_target(&current_policy[cpu], policy->min,
CPUFREQ_RELATION_L); CPUFREQ_RELATION_L);
else } else {
__cpufreq_driver_target(&current_policy[cpu], cpu_cur_freq[cpu], __cpufreq_driver_target(&current_policy[cpu], cpu_set_freq[cpu],
CPUFREQ_RELATION_L); CPUFREQ_RELATION_L);
}
memcpy (&current_policy[cpu], policy, sizeof(struct cpufreq_policy)); memcpy (&current_policy[cpu], policy, sizeof(struct cpufreq_policy));
up(&userspace_sem); up(&userspace_sem);
break; break;
......
drivers/cpufreq/freq_table.c
View file @ f3af7498
...@@ -9,6 +9,8 @@ ...@@ -9,6 +9,8 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/cpufreq.h> #include <linux/cpufreq.h>
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, "freq-table", msg)
/********************************************************************* /*********************************************************************
* FREQUENCY TABLE HELPERS * * FREQUENCY TABLE HELPERS *
*********************************************************************/ *********************************************************************/
...@@ -22,8 +24,12 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy, ...@@ -22,8 +24,12 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
for (i=0; (table[i].frequency != CPUFREQ_TABLE_END); i++) { for (i=0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
unsigned int freq = table[i].frequency; unsigned int freq = table[i].frequency;
if (freq == CPUFREQ_ENTRY_INVALID) if (freq == CPUFREQ_ENTRY_INVALID) {
dprintk("table entry %u is invalid, skipping\n", i);
continue; continue;
}
dprintk("table entry %u: %u kHz, %u index\n", i, freq, table[i].index);
if (freq < min_freq) if (freq < min_freq)
min_freq = freq; min_freq = freq;
if (freq > max_freq) if (freq > max_freq)
...@@ -48,6 +54,8 @@ int cpufreq_frequency_table_verify(struct cpufreq_policy *policy, ...@@ -48,6 +54,8 @@ int cpufreq_frequency_table_verify(struct cpufreq_policy *policy,
unsigned int i = 0; unsigned int i = 0;
unsigned int count = 0; unsigned int count = 0;
dprintk("request for verification of policy (%u - %u kHz) for cpu %u\n", policy->min, policy->max, policy->cpu);
if (!cpu_online(policy->cpu)) if (!cpu_online(policy->cpu))
return -EINVAL; return -EINVAL;
...@@ -72,6 +80,8 @@ int cpufreq_frequency_table_verify(struct cpufreq_policy *policy, ...@@ -72,6 +80,8 @@ int cpufreq_frequency_table_verify(struct cpufreq_policy *policy,
policy->cpuinfo.min_freq, policy->cpuinfo.min_freq,
policy->cpuinfo.max_freq); policy->cpuinfo.max_freq);
dprintk("verification lead to (%u - %u kHz) for cpu %u\n", policy->min, policy->max, policy->cpu);
return 0; return 0;
} }
EXPORT_SYMBOL_GPL(cpufreq_frequency_table_verify); EXPORT_SYMBOL_GPL(cpufreq_frequency_table_verify);
...@@ -87,6 +97,8 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, ...@@ -87,6 +97,8 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
struct cpufreq_frequency_table suboptimal = { .index = ~0, }; struct cpufreq_frequency_table suboptimal = { .index = ~0, };
unsigned int i; unsigned int i;
dprintk("request for target %u kHz (relation: %u) for cpu %u\n", target_freq, relation, policy->cpu);
switch (relation) { switch (relation) {
case CPUFREQ_RELATION_H: case CPUFREQ_RELATION_H:
optimal.frequency = 0; optimal.frequency = 0;
...@@ -143,6 +155,9 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, ...@@ -143,6 +155,9 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
} else } else
*index = optimal.index; *index = optimal.index;
dprintk("target is %u (%u kHz, %u)\n", *index, table[*index].frequency,
table[*index].index);
return 0; return 0;
} }
EXPORT_SYMBOL_GPL(cpufreq_frequency_table_target); EXPORT_SYMBOL_GPL(cpufreq_frequency_table_target);
...@@ -175,7 +190,7 @@ static ssize_t show_available_freqs (struct cpufreq_policy *policy, char *buf) ...@@ -175,7 +190,7 @@ static ssize_t show_available_freqs (struct cpufreq_policy *policy, char *buf)
} }
struct freq_attr cpufreq_freq_attr_scaling_available_freqs = { struct freq_attr cpufreq_freq_attr_scaling_available_freqs = {
.attr = { .name = "scaling_available_frequencies", .mode = 0444 }, .attr = { .name = "scaling_available_frequencies", .mode = 0444, .owner=THIS_MODULE },
.show = show_available_freqs, .show = show_available_freqs,
}; };
EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_available_freqs); EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_available_freqs);
...@@ -187,12 +202,14 @@ EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_available_freqs); ...@@ -187,12 +202,14 @@ EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_available_freqs);
void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table, void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table,
unsigned int cpu) unsigned int cpu)
{ {
dprintk("setting show_table for cpu %u to %p\n", cpu, table);
show_table[cpu] = table; show_table[cpu] = table;
} }
EXPORT_SYMBOL_GPL(cpufreq_frequency_table_get_attr); EXPORT_SYMBOL_GPL(cpufreq_frequency_table_get_attr);
void cpufreq_frequency_table_put_attr(unsigned int cpu) void cpufreq_frequency_table_put_attr(unsigned int cpu)
{ {
dprintk("clearing show_table for cpu %u\n", cpu);
show_table[cpu] = NULL; show_table[cpu] = NULL;
} }
EXPORT_SYMBOL_GPL(cpufreq_frequency_table_put_attr); EXPORT_SYMBOL_GPL(cpufreq_frequency_table_put_attr);
......
include/linux/cpufreq.h
View file @ f3af7498
...@@ -261,8 +261,8 @@ int cpufreq_parse_governor (char *str_governor, unsigned int *policy, struct cpu ...@@ -261,8 +261,8 @@ int cpufreq_parse_governor (char *str_governor, unsigned int *policy, struct cpu
*********************************************************************/ *********************************************************************/
#ifdef CONFIG_CPU_FREQ_24_API #ifdef CONFIG_CPU_FREQ_24_API
int cpufreq_setmax(unsigned int cpu); int __deprecated cpufreq_setmax(unsigned int cpu);
int cpufreq_set(unsigned int kHz, unsigned int cpu); int __deprecated cpufreq_set(unsigned int kHz, unsigned int cpu);
/* /proc/sys/cpu */ /* /proc/sys/cpu */
...@@ -360,4 +360,23 @@ void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table, ...@@ -360,4 +360,23 @@ void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table,
void cpufreq_frequency_table_put_attr(unsigned int cpu); void cpufreq_frequency_table_put_attr(unsigned int cpu);
/*********************************************************************
* UNIFIED DEBUG HELPERS *
*********************************************************************/
#define CPUFREQ_DEBUG_CORE 1
#define CPUFREQ_DEBUG_DRIVER 2
#define CPUFREQ_DEBUG_GOVERNOR 4
#ifdef CONFIG_CPU_FREQ_DEBUG
extern void cpufreq_debug_printk(unsigned int type, const char *prefix,
const char *fmt, ...);
#else
#define cpufreq_debug_printk(msg...) do { } while(0)
#endif /* CONFIG_CPU_FREQ_DEBUG */
#endif /* _LINUX_CPUFREQ_H */ #endif /* _LINUX_CPUFREQ_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7