[media] v4l: vsp1: Add VSP+DU support

Implement internal control of the VSP pipeline to be used by the DU
DRM/KMS driver when using the VSP as an internal composer handled
through DRM/KMS only.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/platform/vsp1/Makefile

 vsp1-y					:= vsp1_drv.o vsp1_entity.o vsp1_pipe.o
-vsp1-y					+= vsp1_video.o
+vsp1-y					+= vsp1_drm.o vsp1_video.o
 vsp1-y					+= vsp1_rpf.o vsp1_rwpf.o vsp1_wpf.o
 vsp1-y					+= vsp1_hsit.o vsp1_lif.o vsp1_lut.o
 vsp1-y					+= vsp1_bru.o vsp1_sru.o vsp1_uds.o

drivers/media/platform/vsp1/vsp1.h

@@ -26,6 +26,7 @@
 struct clk;
 struct device;
 
+struct vsp1_drm;
 struct vsp1_platform_data;
 struct vsp1_bru;
 struct vsp1_hsit;
@@ -78,8 +79,8 @@ struct vsp1_device {
 
 	struct v4l2_device v4l2_dev;
 	struct media_device media_dev;
-
 	struct media_entity_operations media_ops;
+	struct vsp1_drm *drm;
 };
 
 int vsp1_device_get(struct vsp1_device *vsp1);

drivers/media/platform/vsp1/vsp1_drm.c

+/*
+ * vsp1_drm.c  --  R-Car VSP1 DRM API
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/vsp1.h>
+
+#include <media/media-entity.h>
+#include <media/v4l2-subdev.h>
+
+#include "vsp1.h"
+#include "vsp1_bru.h"
+#include "vsp1_drm.h"
+#include "vsp1_lif.h"
+#include "vsp1_pipe.h"
+#include "vsp1_rwpf.h"
+
+/* -----------------------------------------------------------------------------
+ * Runtime Handling
+ */
+
+static int vsp1_drm_pipeline_run(struct vsp1_pipeline *pipe)
+{
+	struct vsp1_device *vsp1 = pipe->output->entity.vsp1;
+	int ret;
+
+	if (vsp1->drm->update) {
+		struct vsp1_entity *entity;
+
+		list_for_each_entry(entity, &pipe->entities, list_pipe) {
+			/* Skip unused RPFs. */
+			if (entity->type == VSP1_ENTITY_RPF) {
+				struct vsp1_rwpf *rpf =
+					to_rwpf(&entity->subdev);
+
+				if (!pipe->inputs[rpf->entity.index])
+					continue;
+			}
+
+			vsp1_entity_route_setup(entity);
+
+			ret = v4l2_subdev_call(&entity->subdev, video,
+					       s_stream, 1);
+			if (ret < 0) {
+				dev_err(vsp1->dev,
+					"DRM pipeline start failure on entity %s\n",
+					entity->subdev.name);
+				return ret;
+			}
+		}
+
+		vsp1->drm->update = false;
+	}
+
+	vsp1_pipeline_run(pipe);
+
+	return 0;
+}
+
+static void vsp1_drm_pipeline_frame_end(struct vsp1_pipeline *pipe)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pipe->irqlock, flags);
+	if (pipe->num_inputs)
+		vsp1_drm_pipeline_run(pipe);
+	spin_unlock_irqrestore(&pipe->irqlock, flags);
+}
+
+/* -----------------------------------------------------------------------------
+ * DU Driver API
+ */
+
+int vsp1_du_init(struct device *dev)
+{
+	struct vsp1_device *vsp1 = dev_get_drvdata(dev);
+
+	if (!vsp1)
+		return -EPROBE_DEFER;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(vsp1_du_init);
+
+/**
+ * vsp1_du_setup_lif - Setup the output part of the VSP pipeline
+ * @dev: the VSP device
+ * @width: output frame width in pixels
+ * @height: output frame height in pixels
+ *
+ * Configure the output part of VSP DRM pipeline for the given frame @width and
+ * @height. This sets up formats on the BRU source pad, the WPF0 sink and source
+ * pads, and the LIF sink pad.
+ *
+ * As the media bus code on the BRU source pad is conditioned by the
+ * configuration of the BRU sink 0 pad, we also set up the formats on all BRU
+ * sinks, even if the configuration will be overwritten later by
+ * vsp1_du_setup_rpf(). This ensures that the BRU configuration is set to a well
+ * defined state.
+ *
+ * Return 0 on success or a negative error code on failure.
+ */
+int vsp1_du_setup_lif(struct device *dev, unsigned int width,
+		      unsigned int height)
+{
+	struct vsp1_device *vsp1 = dev_get_drvdata(dev);
+	struct vsp1_pipeline *pipe = &vsp1->drm->pipe;
+	struct vsp1_bru *bru = vsp1->bru;
+	struct v4l2_subdev_format format;
+	unsigned int i;
+	int ret;
+
+	dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n",
+		__func__, width, height);
+
+	if (width == 0 || height == 0) {
+		/* Zero width or height means the CRTC is being disabled, stop
+		 * the pipeline and turn the light off.
+		 */
+		ret = vsp1_pipeline_stop(pipe);
+		if (ret == -ETIMEDOUT)
+			dev_err(vsp1->dev, "DRM pipeline stop timeout\n");
+
+		media_entity_pipeline_stop(&pipe->output->entity.subdev.entity);
+
+		for (i = 0; i < bru->entity.source_pad; ++i) {
+			bru->inputs[i].rpf = NULL;
+			pipe->inputs[i] = NULL;
+		}
+
+		pipe->num_inputs = 0;
+
+		vsp1_device_put(vsp1);
+
+		dev_dbg(vsp1->dev, "%s: pipeline disabled\n", __func__);
+
+		return 0;
+	}
+
+	/* Configure the format at the BRU sinks and propagate it through the
+	 * pipeline.
+	 */
+	memset(&format, 0, sizeof(format));
+	format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+
+	for (i = 0; i < bru->entity.source_pad; ++i) {
+		format.pad = i;
+
+		format.format.width = width;
+		format.format.height = height;
+		format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
+		format.format.field = V4L2_FIELD_NONE;
+
+		ret = v4l2_subdev_call(&bru->entity.subdev, pad,
+				       set_fmt, NULL, &format);
+		if (ret < 0)
+			return ret;
+
+		dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on BRU pad %u\n",
+			__func__, format.format.width, format.format.height,
+			format.format.code, i);
+	}
+
+	format.pad = bru->entity.source_pad;
+	format.format.width = width;
+	format.format.height = height;
+	format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
+	format.format.field = V4L2_FIELD_NONE;
+
+	ret = v4l2_subdev_call(&bru->entity.subdev, pad, set_fmt, NULL,
+			       &format);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on BRU pad %u\n",
+		__func__, format.format.width, format.format.height,
+		format.format.code, i);
+
+	format.pad = RWPF_PAD_SINK;
+	ret = v4l2_subdev_call(&vsp1->wpf[0]->entity.subdev, pad, set_fmt, NULL,
+			       &format);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on WPF0 sink\n",
+		__func__, format.format.width, format.format.height,
+		format.format.code);
+
+	format.pad = RWPF_PAD_SOURCE;
+	ret = v4l2_subdev_call(&vsp1->wpf[0]->entity.subdev, pad, get_fmt, NULL,
+			       &format);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(vsp1->dev, "%s: got format %ux%u (%x) on WPF0 source\n",
+		__func__, format.format.width, format.format.height,
+		format.format.code);
+
+	format.pad = LIF_PAD_SINK;
+	ret = v4l2_subdev_call(&vsp1->lif->entity.subdev, pad, set_fmt, NULL,
+			       &format);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on LIF sink\n",
+		__func__, format.format.width, format.format.height,
+		format.format.code);
+
+	/* Verify that the format at the output of the pipeline matches the
+	 * requested frame size and media bus code.
+	 */
+	if (format.format.width != width || format.format.height != height ||
+	    format.format.code != MEDIA_BUS_FMT_ARGB8888_1X32) {
+		dev_dbg(vsp1->dev, "%s: format mismatch\n", __func__);
+		return -EPIPE;
+	}
+
+	/* Mark the pipeline as streaming and enable the VSP1. This will store
+	 * the pipeline pointer in all entities, which the s_stream handlers
+	 * will need. We don't start the entities themselves right at this point
+	 * as there's no plane configured yet, so we can't start processing
+	 * buffers.
+	 */
+	ret = vsp1_device_get(vsp1);
+	if (ret < 0)
+		return ret;
+
+	ret = media_entity_pipeline_start(&pipe->output->entity.subdev.entity,
+					  &pipe->pipe);
+	if (ret < 0) {
+		dev_dbg(vsp1->dev, "%s: pipeline start failed\n", __func__);
+		vsp1_device_put(vsp1);
+		return ret;
+	}
+
+	dev_dbg(vsp1->dev, "%s: pipeline enabled\n", __func__);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(vsp1_du_setup_lif);
+
+/**
+ * vsp1_du_setup_rpf - Setup one RPF input of the VSP pipeline
+ * @dev: the VSP device
+ * @rpf_index: index of the RPF to setup (0-based)
+ * @pixelformat: V4L2 pixel format for the RPF memory input
+ * @pitch: number of bytes per line in the image stored in memory
+ * @mem: DMA addresses of the memory buffers (one per plane)
+ * @src: the source crop rectangle for the RPF
+ * @dst: the destination compose rectangle for the BRU input
+ *
+ * Configure the VSP to perform composition of the image referenced by @mem
+ * through RPF @rpf_index, using the @src crop rectangle and the @dst
+ * composition rectangle. The Z-order is fixed with RPF 0 at the bottom.
+ *
+ * Image format as stored in memory is expressed as a V4L2 @pixelformat value.
+ * As a special case, setting the pixel format to 0 will disable the RPF. The
+ * @pitch, @mem, @src and @dst parameters are ignored in that case. Calling the
+ * function on a disabled RPF is allowed.
+ *
+ * The memory pitch is configurable to allow for padding at end of lines, or
+ * simple for images that extend beyond the crop rectangle boundaries. The
+ * @pitch value is expressed in bytes and applies to all planes for multiplanar
+ * formats.
+ *
+ * The source memory buffer is referenced by the DMA address of its planes in
+ * the @mem array. Up to two planes are supported. The second plane DMA address
+ * is ignored for formats using a single plane.
+ *
+ * This function isn't reentrant, the caller needs to serialize calls.
+ *
+ * TODO: Implement Z-order control by decoupling the RPF index from the BRU
+ * input index.
+ *
+ * Return 0 on success or a negative error code on failure.
+ */
+int vsp1_du_setup_rpf(struct device *dev, unsigned int rpf_index,
+		      u32 pixelformat, unsigned int pitch,
+		      dma_addr_t mem[2], const struct v4l2_rect *src,
+		      const struct v4l2_rect *dst)
+{
+	struct vsp1_device *vsp1 = dev_get_drvdata(dev);
+	struct vsp1_pipeline *pipe = &vsp1->drm->pipe;
+	const struct vsp1_format_info *fmtinfo;
+	struct v4l2_subdev_selection sel;
+	struct v4l2_subdev_format format;
+	struct vsp1_rwpf_memory memory;
+	struct vsp1_rwpf *rpf;
+	unsigned long flags;
+	bool start_stop = false;
+	int ret;
+
+	if (rpf_index >= vsp1->pdata.rpf_count)
+		return -EINVAL;
+
+	rpf = vsp1->rpf[rpf_index];
+
+	if (pixelformat == 0) {
+		dev_dbg(vsp1->dev, "%s: RPF%u: disable requested\n", __func__,
+			rpf_index);
+
+		spin_lock_irqsave(&pipe->irqlock, flags);
+
+		if (pipe->inputs[rpf_index]) {
+			/* Remove the RPF from the pipeline if it was previously
+			 * enabled.
+			 */
+			vsp1->bru->inputs[rpf_index].rpf = NULL;
+			pipe->inputs[rpf_index] = NULL;
+
+			vsp1->drm->update = true;
+			start_stop = --pipe->num_inputs == 0;
+		}
+
+		spin_unlock_irqrestore(&pipe->irqlock, flags);
+
+		/* Stop the pipeline if we're the last user. */
+		if (start_stop)
+			vsp1_pipeline_stop(pipe);
+
+		return 0;
+	}
+
+	dev_dbg(vsp1->dev,
+		"%s: RPF%u: (%u,%u)/%ux%u -> (%u,%u)/%ux%u (%08x), pitch %u dma { %pad, %pad }\n",
+		__func__, rpf_index,
+		src->left, src->top, src->width, src->height,
+		dst->left, dst->top, dst->width, dst->height,
+		pixelformat, pitch, &mem[0], &mem[1]);
+
+	/* Set the stride at the RPF input. */
+	fmtinfo = vsp1_get_format_info(pixelformat);
+	if (!fmtinfo) {
+		dev_dbg(vsp1->dev, "Unsupport pixel format %08x for RPF\n",
+			pixelformat);
+		return -EINVAL;
+	}
+
+	rpf->fmtinfo = fmtinfo;
+	rpf->format.num_planes = fmtinfo->planes;
+	rpf->format.plane_fmt[0].bytesperline = pitch;
+	rpf->format.plane_fmt[1].bytesperline = pitch;
+
+	/* Configure the format on the RPF sink pad and propagate it up to the
+	 * BRU sink pad.
+	 */
+	memset(&format, 0, sizeof(format));
+	format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+	format.pad = RWPF_PAD_SINK;
+	format.format.width = src->width + src->left;
+	format.format.height = src->height + src->top;
+	format.format.code = fmtinfo->mbus;
+	format.format.field = V4L2_FIELD_NONE;
+
+	ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_fmt, NULL,
+			       &format);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(vsp1->dev,
+		"%s: set format %ux%u (%x) on RPF%u sink\n",
+		__func__, format.format.width, format.format.height,
+		format.format.code, rpf->entity.index);
+
+	memset(&sel, 0, sizeof(sel));
+	sel.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+	sel.pad = RWPF_PAD_SINK;
+	sel.target = V4L2_SEL_TGT_CROP;
+	sel.r = *src;
+
+	ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_selection, NULL,
+			       &sel);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(vsp1->dev,
+		"%s: set selection (%u,%u)/%ux%u on RPF%u sink\n",
+		__func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height,
+		rpf->entity.index);
+
+	/* RPF source, hardcode the format to ARGB8888 to turn on format
+	 * conversion if needed.
+	 */
+	format.pad = RWPF_PAD_SOURCE;
+
+	ret = v4l2_subdev_call(&rpf->entity.subdev, pad, get_fmt, NULL,
+			       &format);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(vsp1->dev,
+		"%s: got format %ux%u (%x) on RPF%u source\n",
+		__func__, format.format.width, format.format.height,
+		format.format.code, rpf->entity.index);
+
+	format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
+
+	ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_fmt, NULL,
+			       &format);
+	if (ret < 0)
+		return ret;
+
+	/* BRU sink, propagate the format from the RPF source. */
+	format.pad = rpf->entity.index;
+
+	ret = v4l2_subdev_call(&vsp1->bru->entity.subdev, pad, set_fmt, NULL,
+			       &format);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on BRU pad %u\n",
+		__func__, format.format.width, format.format.height,
+		format.format.code, format.pad);
+
+	sel.pad = rpf->entity.index;
+	sel.target = V4L2_SEL_TGT_COMPOSE;
+	sel.r = *dst;
+
+	ret = v4l2_subdev_call(&vsp1->bru->entity.subdev, pad, set_selection,
+			       NULL, &sel);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(vsp1->dev,
+		"%s: set selection (%u,%u)/%ux%u on BRU pad %u\n",
+		__func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height,
+		sel.pad);
+
+	/* Store the compose rectangle coordinates in the RPF. */
+	rpf->location.left = dst->left;
+	rpf->location.top = dst->top;
+
+	/* Set the memory buffer address. */
+	memory.num_planes = fmtinfo->planes;
+	memory.addr[0] = mem[0];
+	memory.addr[1] = mem[1];
+
+	rpf->ops->set_memory(rpf, &memory);
+
+	spin_lock_irqsave(&pipe->irqlock, flags);
+
+	/* If the RPF was previously stopped set the BRU input to the RPF and
+	 * store the RPF in the pipeline inputs array.
+	 */
+	if (!pipe->inputs[rpf->entity.index]) {
+		vsp1->bru->inputs[rpf_index].rpf = rpf;
+		pipe->inputs[rpf->entity.index] = rpf;
+		start_stop = pipe->num_inputs++ == 0;
+	}
+
+	/* Start the pipeline if it's currently stopped. */
+	vsp1->drm->update = true;
+	if (start_stop)
+		vsp1_drm_pipeline_run(pipe);
+
+	spin_unlock_irqrestore(&pipe->irqlock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(vsp1_du_setup_rpf);
+
+/* -----------------------------------------------------------------------------
+ * Initialization
+ */
+
+int vsp1_drm_create_links(struct vsp1_device *vsp1)
+{
+	const u32 flags = MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE;
+	unsigned int i;
+	int ret;
+
+	/* VSPD instances require a BRU to perform composition and a LIF to
+	 * output to the DU.
+	 */
+	if (!vsp1->bru || !vsp1->lif)
+		return -ENXIO;
+
+	for (i = 0; i < vsp1->pdata.rpf_count; ++i) {
+		struct vsp1_rwpf *rpf = vsp1->rpf[i];
+
+		ret = media_create_pad_link(&rpf->entity.subdev.entity,
+					    RWPF_PAD_SOURCE,
+					    &vsp1->bru->entity.subdev.entity,
+					    i, flags);
+		if (ret < 0)
+			return ret;
+
+		rpf->entity.sink = &vsp1->bru->entity.subdev.entity;
+		rpf->entity.sink_pad = i;
+	}
+
+	ret = media_create_pad_link(&vsp1->bru->entity.subdev.entity,
+				    vsp1->bru->entity.source_pad,
+				    &vsp1->wpf[0]->entity.subdev.entity,
+				    RWPF_PAD_SINK, flags);
+	if (ret < 0)
+		return ret;
+
+	vsp1->bru->entity.sink = &vsp1->wpf[0]->entity.subdev.entity;
+	vsp1->bru->entity.sink_pad = RWPF_PAD_SINK;
+
+	ret = media_create_pad_link(&vsp1->wpf[0]->entity.subdev.entity,
+				    RWPF_PAD_SOURCE,
+				    &vsp1->lif->entity.subdev.entity,
+				    LIF_PAD_SINK, flags);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int vsp1_drm_init(struct vsp1_device *vsp1)
+{
+	struct vsp1_pipeline *pipe;
+	unsigned int i;
+
+	vsp1->drm = devm_kzalloc(vsp1->dev, sizeof(*vsp1->drm), GFP_KERNEL);
+	if (!vsp1->drm)
+		return -ENOMEM;
+
+	pipe = &vsp1->drm->pipe;
+
+	vsp1_pipeline_init(pipe);
+	pipe->frame_end = vsp1_drm_pipeline_frame_end;
+
+	/* The DRM pipeline is static, add entities manually. */
+	for (i = 0; i < vsp1->pdata.rpf_count; ++i) {
+		struct vsp1_rwpf *input = vsp1->rpf[i];
+
+		list_add_tail(&input->entity.list_pipe, &pipe->entities);
+	}
+
+	list_add_tail(&vsp1->bru->entity.list_pipe, &pipe->entities);
+	list_add_tail(&vsp1->wpf[0]->entity.list_pipe, &pipe->entities);
+	list_add_tail(&vsp1->lif->entity.list_pipe, &pipe->entities);
+
+	pipe->bru = &vsp1->bru->entity;
+	pipe->lif = &vsp1->lif->entity;
+	pipe->output = vsp1->wpf[0];
+
+	return 0;
+}

drivers/media/platform/vsp1/vsp1_drm.h

+/*
+ * vsp1_drm.h  --  R-Car VSP1 DRM/KMS Interface
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __VSP1_DRM_H__
+#define __VSP1_DRM_H__
+
+#include "vsp1_pipe.h"
+
+struct vsp1_drm {
+	struct vsp1_pipeline pipe;
+	bool update;
+};
+
+int vsp1_drm_init(struct vsp1_device *vsp1);
+int vsp1_drm_create_links(struct vsp1_device *vsp1);
+
+#endif /* __VSP1_DRM_H__ */

drivers/media/platform/vsp1/vsp1_drv.c

@@ -25,6 +25,7 @@
 
 #include "vsp1.h"
 #include "vsp1_bru.h"
+#include "vsp1_drm.h"
 #include "vsp1_hsit.h"
 #include "vsp1_lif.h"
 #include "vsp1_lut.h"
@@ -120,7 +121,7 @@ static int vsp1_create_sink_links(struct vsp1_device *vsp1,
 	return 0;
 }
 
-static int vsp1_create_links(struct vsp1_device *vsp1)
+static int vsp1_uapi_create_links(struct vsp1_device *vsp1)
 {
 	struct vsp1_entity *entity;
 	unsigned int i;
@@ -145,9 +146,6 @@ static int vsp1_create_links(struct vsp1_device *vsp1)
 			return ret;
 	}
 
-	if (!vsp1->pdata.uapi)
-		return 0;
-
 	for (i = 0; i < vsp1->pdata.rpf_count; ++i) {
 		struct vsp1_rwpf *rpf = vsp1->rpf[i];
 
@@ -360,15 +358,22 @@ static int vsp1_create_entities(struct vsp1_device *vsp1)
 	}
 
 	/* Create links. */
-	ret = vsp1_create_links(vsp1);
+	if (vsp1->pdata.uapi)
+		ret = vsp1_uapi_create_links(vsp1);
+	else
+		ret = vsp1_drm_create_links(vsp1);
 	if (ret < 0)
 		goto done;
 
-	if (vsp1->pdata.uapi) {
+	/* Register subdev nodes if the userspace API is enabled or initialize
+	 * the DRM pipeline otherwise.
+	 */
+	if (vsp1->pdata.uapi)
 		ret = v4l2_device_register_subdev_nodes(&vsp1->v4l2_dev);
-		if (ret < 0)
-			goto done;
-	}
+	else
+		ret = vsp1_drm_init(vsp1);
+	if (ret < 0)
+		goto done;
 
 	ret = media_device_register(mdev);
 

include/media/vsp1.h

+/*
+ * vsp1.h  --  R-Car VSP1 API
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __MEDIA_VSP1_H__
+#define __MEDIA_VSP1_H__
+
+#include <linux/types.h>
+
+struct device;
+struct v4l2_rect;
+
+int vsp1_du_init(struct device *dev);
+
+int vsp1_du_setup_lif(struct device *dev, unsigned int width,
+		      unsigned int height);
+
+int vsp1_du_setup_rpf(struct device *dev, unsigned int rpf, u32 pixelformat,
+		      unsigned int pitch, dma_addr_t mem[2],
+		      const struct v4l2_rect *src, const struct v4l2_rect *dst);
+
+#endif /* __MEDIA_VSP1_H__ */