Commit f553aa1c authored by Guo Ren's avatar Guo Ren

csky: fixup relocation error with 807 & 860

810 doesn't support jsri instruction and csky-as will leave
jsri + nop for relocation. Module-probe need replace them with
lrw + jsr.
Signed-off-by: default avatarGuo Ren <ren_guo@c-sky.com>
Cc: Hui Kai <huikai@acoinfo.com>
parent 8a5aaf97
......@@ -12,7 +12,7 @@
#include <linux/spinlock.h>
#include <asm/pgtable.h>
#if defined(__CSKYABIV2__)
#ifdef CONFIG_CPU_CK810
#define IS_BSR32(hi16, lo16) (((hi16) & 0xFC00) == 0xE000)
#define IS_JSRI32(hi16, lo16) ((hi16) == 0xEAE0)
......@@ -25,6 +25,26 @@
*(uint16_t *)(addr) = 0xE8Fa; \
*((uint16_t *)(addr) + 1) = 0x0000; \
} while (0)
static void jsri_2_lrw_jsr(uint32_t *location)
{
uint16_t location_tmp = (uint16_t *)location;
if (IS_BSR32(*location_tmp, *(location_tmp + 1)))
return;
if (IS_JSRI32(*location_tmp, *(location_tmp + 1))) {
/* jsri 0x... --> lrw r26, 0x... */
CHANGE_JSRI_TO_LRW(location);
/* lsli r0, r0 --> jsr r26 */
SET_JSR32_R26(location + 1);
}
}
#else
static void inline jsri_2_lrw_jsr(uint32_t *location)
{
return;
}
#endif
int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
......@@ -35,9 +55,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
Elf32_Sym *sym;
uint32_t *location;
short *temp;
#if defined(__CSKYABIV2__)
uint16_t *location_tmp;
#endif
for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
/* This is where to make the change */
......@@ -59,18 +76,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
case R_CSKY_PCRELJSR_IMM11BY2:
break;
case R_CSKY_PCRELJSR_IMM26BY2:
#if defined(__CSKYABIV2__)
location_tmp = (uint16_t *)location;
if (IS_BSR32(*location_tmp, *(location_tmp + 1)))
break;
if (IS_JSRI32(*location_tmp, *(location_tmp + 1))) {
/* jsri 0x... --> lrw r26, 0x... */
CHANGE_JSRI_TO_LRW(location);
/* lsli r0, r0 --> jsr r26 */
SET_JSR32_R26(location + 1);
}
#endif
jsri_2_lrw_jsr(location);
break;
case R_CSKY_ADDR_HI16:
temp = ((short *)location) + 1;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment