Skip to content

L
linux
Commit f588328d authored by Stephen Hemminger's avatar Stephen Hemminger
Browse files
Options

[PATCH] get rid of old IRDA drivers. 

According to Jean the toshoboe and old smc ircc drivers are no longer needed.
This patch removes them from 2.6.0-test5
parent 8736a430
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 2241 deletions
drivers/net/irda/Kconfig
View file @ f588328d
...@@ -254,18 +254,6 @@ config WINBOND_FIR ...@@ -254,18 +254,6 @@ config WINBOND_FIR
<file:Documentation/modules.txt>. The module will be called <file:Documentation/modules.txt>. The module will be called
w83977af_ir. w83977af_ir.
config TOSHIBA_OLD
tristate "Toshiba Type-O IR Port (old driver)"
depends on IRDA && BROKEN_ON_SMP
help
Say Y here if you want to build support for the Toshiba Type-O IR
chipset. This chipset is used by the Toshiba Libretto 100CT, and
many more laptops. This driver is obsolete, will no more be
maintained and will be removed in favor of the new driver.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
The module will be called toshoboe.
config TOSHIBA_FIR config TOSHIBA_FIR
tristate "Toshiba Type-O IR Port" tristate "Toshiba Type-O IR Port"
depends on IRDA depends on IRDA
...@@ -281,18 +269,6 @@ config AU1000_FIR ...@@ -281,18 +269,6 @@ config AU1000_FIR
tristate "Alchemy Au1000 SIR/FIR" tristate "Alchemy Au1000 SIR/FIR"
depends on MIPS_AU1000 && IRDA depends on MIPS_AU1000 && IRDA
config SMC_IRCC_OLD
tristate "SMC IrCC (old driver) (EXPERIMENTAL)"
depends on EXPERIMENTAL && IRDA && ISA
help
Say Y here if you want to build support for the SMC Infrared
Communications Controller. It is used in the Fujitsu Lifebook 635t
and Sony PCG-505TX. This driver is obsolete, will no more be
maintained and will be removed in favor of the new driver.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be
called smc-ircc.
config SMC_IRCC_FIR config SMC_IRCC_FIR
tristate "SMSC IrCC (EXPERIMENTAL)" tristate "SMSC IrCC (EXPERIMENTAL)"
depends on EXPERIMENTAL && IRDA && ISA depends on EXPERIMENTAL && IRDA && ISA
......
drivers/net/irda/Makefile
View file @ f588328d
...@@ -12,9 +12,7 @@ obj-$(CONFIG_USB_IRDA) += irda-usb.o ...@@ -12,9 +12,7 @@ obj-$(CONFIG_USB_IRDA) += irda-usb.o
obj-$(CONFIG_NSC_FIR) += nsc-ircc.o obj-$(CONFIG_NSC_FIR) += nsc-ircc.o
obj-$(CONFIG_WINBOND_FIR) += w83977af_ir.o obj-$(CONFIG_WINBOND_FIR) += w83977af_ir.o
obj-$(CONFIG_SA1100_FIR) += sa1100_ir.o obj-$(CONFIG_SA1100_FIR) += sa1100_ir.o
obj-$(CONFIG_TOSHIBA_OLD) += toshoboe.o
obj-$(CONFIG_TOSHIBA_FIR) += donauboe.o obj-$(CONFIG_TOSHIBA_FIR) += donauboe.o
obj-$(CONFIG_SMC_IRCC_OLD) += smc-ircc.o irport.o
obj-$(CONFIG_SMC_IRCC_FIR) += smsc-ircc2.o obj-$(CONFIG_SMC_IRCC_FIR) += smsc-ircc2.o
obj-$(CONFIG_ALI_FIR) += ali-ircc.o obj-$(CONFIG_ALI_FIR) += ali-ircc.o
obj-$(CONFIG_VLSI_FIR) += vlsi_ir.o obj-$(CONFIG_VLSI_FIR) += vlsi_ir.o
......
drivers/net/irda/smc-ircc.c deleted 100644 → 0
View file @ 8736a430
/*********************************************************************
*
* Filename: smc-ircc.c
* Version: 0.4
* Description: Driver for the SMC Infrared Communications Controller
* Status: Experimental.
* Author: Thomas Davis (tadavis@jps.net)
* Created at:
* Modified at: Tue Feb 22 10:05:06 2000
* Modified by: Dag Brattli <dag@brattli.net>
* Modified at: Tue Jun 26 2001
* Modified by: Stefani Seibold <stefani@seibold.net>
* Modified at: Thur Apr 18 2002
* Modified by: Jeff Snyder <je4d@pobox.com>
*
* Copyright (c) 2001 Stefani Seibold
* Copyright (c) 1999-2001 Dag Brattli
* Copyright (c) 1998-1999 Thomas Davis,
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* SIO's: all SIO documentet by SMC (June, 2001)
* Applicable Models : Fujitsu Lifebook 635t, Sony PCG-505TX,
* Dell Inspiron 8000
*
********************************************************************/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/rtnetlink.h>
#include <linux/serial_reg.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/byteorder.h>
#include <linux/pm.h>
#include <net/irda/wrapper.h>
#include <net/irda/irda.h>
#include <net/irda/irda_device.h>
#include <net/irda/smc-ircc.h>
#include <net/irda/irport.h>
struct smc_chip {
char *name;
u16 flags;
u8 devid;
u8 rev;
};
typedef struct smc_chip smc_chip_t;
static const char *driver_name = "smc-ircc";
#define DIM(x) (sizeof(x)/(sizeof(*(x))))
#define CHIP_IO_EXTENT 8
static struct ircc_cb *dev_self[] = { NULL, NULL};
/* Some prototypes */
static int ircc_open(unsigned int iobase, unsigned int board_addr);
static int ircc_dma_receive(struct ircc_cb *self, int iobase);
static void ircc_dma_receive_complete(struct ircc_cb *self, int iobase);
static int ircc_hard_xmit(struct sk_buff *skb, struct net_device *dev);
static void ircc_dma_xmit(struct ircc_cb *self, int iobase, int bofs);
static void ircc_change_speed(void *priv, u32 speed);
static irqreturn_t ircc_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static int ircc_net_open(struct net_device *dev);
static int ircc_net_close(struct net_device *dev);
static int ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data);
#define KEY55_1 0 /* SuperIO Configuration mode with Key <0x55> */
#define KEY55_2 1 /* SuperIO Configuration mode with Key <0x55,0x55> */
#define NoIRDA 2 /* SuperIO Chip has no IRDA Port */
#define SIR 0 /* SuperIO Chip has only slow IRDA */
#define FIR 4 /* SuperIO Chip has fast IRDA */
#define SERx4 8 /* SuperIO Chip supports 115,2 KBaud * 4=460,8 KBaud */
/* These are the currently known SMC SuperIO chipsets */
static smc_chip_t __initdata fdc_chips_flat[]=
{
/* Base address 0x3f0 or 0x370 */
{ "37C44", KEY55_1|NoIRDA, 0x00, 0x00 }, /* This chip can not detected */
{ "37C665GT", KEY55_2|NoIRDA, 0x65, 0x01 },
{ "37C665GT", KEY55_2|NoIRDA, 0x66, 0x01 },
{ "37C669", KEY55_2|SIR|SERx4, 0x03, 0x02 },
{ "37C669", KEY55_2|SIR|SERx4, 0x04, 0x02 }, /* ID? */
{ "37C78", KEY55_2|NoIRDA, 0x78, 0x00 },
{ "37N769", KEY55_1|FIR|SERx4, 0x28, 0x00 },
{ "37N869", KEY55_1|FIR|SERx4, 0x29, 0x00 },
{ NULL }
};
static smc_chip_t __initdata fdc_chips_paged[]=
{
/* Base address 0x3f0 or 0x370 */
{ "37B72X", KEY55_1|SIR|SERx4, 0x4c, 0x00 },
{ "37B77X", KEY55_1|SIR|SERx4, 0x43, 0x00 },
{ "37B78X", KEY55_1|SIR|SERx4, 0x44, 0x00 },
{ "37B80X", KEY55_1|SIR|SERx4, 0x42, 0x00 },
{ "37C67X", KEY55_1|FIR|SERx4, 0x40, 0x00 },
{ "37C93X", KEY55_2|SIR|SERx4, 0x02, 0x01 },
{ "37C93XAPM", KEY55_1|SIR|SERx4, 0x30, 0x01 },
{ "37C93XFR", KEY55_2|FIR|SERx4, 0x03, 0x01 },
{ "37M707", KEY55_1|SIR|SERx4, 0x42, 0x00 },
{ "37M81X", KEY55_1|SIR|SERx4, 0x4d, 0x00 },
{ "37N958FR", KEY55_1|FIR|SERx4, 0x09, 0x04 },
{ "37N971", KEY55_1|FIR|SERx4, 0x0a, 0x00 },
{ "37N972", KEY55_1|FIR|SERx4, 0x0b, 0x00 },
{ NULL }
};
static smc_chip_t __initdata lpc_chips_flat[]=
{
/* Base address 0x2E or 0x4E */
{ "47N227", KEY55_1|FIR|SERx4, 0x5a, 0x00 },
{ "47N267", KEY55_1|FIR|SERx4, 0x5e, 0x00 },
{ NULL }
};
static smc_chip_t __initdata lpc_chips_paged[]=
{
/* Base address 0x2E or 0x4E */
{ "47B27X", KEY55_1|SIR|SERx4, 0x51, 0x00 },
{ "47B37X", KEY55_1|SIR|SERx4, 0x52, 0x00 },
{ "47M10X", KEY55_1|SIR|SERx4, 0x59, 0x00 },
{ "47M120", KEY55_1|NoIRDA|SERx4, 0x5c, 0x00 },
{ "47M13X", KEY55_1|SIR|SERx4, 0x59, 0x00 },
{ "47M14X", KEY55_1|SIR|SERx4, 0x5f, 0x00 },
{ "47N252", KEY55_1|FIR|SERx4, 0x0e, 0x00 },
{ "47S42X", KEY55_1|SIR|SERx4, 0x57, 0x00 },
{ NULL }
};
static int ircc_irq=255;
static int ircc_dma=255;
static int ircc_fir=0;
static int ircc_sir=0;
static int ircc_cfg=0;
static unsigned short dev_count=0;
static inline void register_bank(int iobase, int bank)
{
outb(((inb(iobase+IRCC_MASTER) & 0xf0) | (bank & 0x07)),
iobase+IRCC_MASTER);
}
static int __init smc_access(unsigned short cfg_base,unsigned char reg)
{
IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
outb(reg, cfg_base);
if (inb(cfg_base)!=reg)
return -1;
return 0;
}
static const smc_chip_t * __init smc_probe(unsigned short cfg_base,u8 reg,const smc_chip_t *chip,char *type)
{
u8 devid,xdevid,rev;
IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
/* Leave configuration */
outb(0xaa, cfg_base);
if (inb(cfg_base)==0xaa) /* not a smc superio chip */
return NULL;
outb(reg, cfg_base);
xdevid=inb(cfg_base+1);
/* Enter configuration */
outb(0x55, cfg_base);
if (smc_access(cfg_base,0x55)) /* send second key and check */
return NULL;
/* probe device ID */
if (smc_access(cfg_base,reg))
return NULL;
devid=inb(cfg_base+1);
if (devid==0) /* typical value for unused port */
return NULL;
if (devid==0xff) /* typical value for unused port */
return NULL;
/* probe revision ID */
if (smc_access(cfg_base,reg+1))
return NULL;
rev=inb(cfg_base+1);
if (rev>=128) /* i think this will make no sense */
return NULL;
if (devid==xdevid) /* protection against false positives */
return NULL;
/* Check for expected device ID; are there others? */
while(chip->devid!=devid) {
chip++;
if (chip->name==NULL)
return NULL;
}
if (chip->rev>rev)
return NULL;
MESSAGE("found SMC SuperIO Chip (devid=0x%02x rev=%02X base=0x%04x): %s%s\n",devid,rev,cfg_base,type,chip->name);
if (chip->flags&NoIRDA)
MESSAGE("chipset does not support IRDA\n");
return chip;
}
/*
* Function smc_superio_flat (chip, base, type)
*
* Try get configuration of a smc SuperIO chip with flat register model
*
*/
static int __init smc_superio_flat(const smc_chip_t *chips, unsigned short cfg_base, char *type)
{
unsigned short fir_io;
unsigned short sir_io;
u8 mode;
int ret = -ENODEV;
IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
if (smc_probe(cfg_base,0xD,chips,type)==NULL)
return ret;
outb(0x0c, cfg_base);
mode = inb(cfg_base+1);
mode = (mode & 0x38) >> 3;
/* Value for IR port */
if (mode && mode < 4) {
/* SIR iobase */
outb(0x25, cfg_base);
sir_io = inb(cfg_base+1) << 2;
/* FIR iobase */
outb(0x2b, cfg_base);
fir_io = inb(cfg_base+1) << 3;
if (fir_io) {
if (ircc_open(fir_io, sir_io) == 0)
ret=0;
}
}
/* Exit configuration */
outb(0xaa, cfg_base);
return ret;
}
/*
* Function smc_superio_paged (chip, base, type)
*
* Try get configuration of a smc SuperIO chip with paged register model
*
*/
static int __init smc_superio_paged(const smc_chip_t *chips, unsigned short cfg_base, char *type)
{
unsigned short fir_io;
unsigned short sir_io;
int ret = -ENODEV;
IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
if (smc_probe(cfg_base,0x20,chips,type)==NULL)
return ret;
/* Select logical device (UART2) */
outb(0x07, cfg_base);
outb(0x05, cfg_base + 1);
/* SIR iobase */
outb(0x60, cfg_base);
sir_io = inb(cfg_base + 1) << 8;
outb(0x61, cfg_base);
sir_io |= inb(cfg_base + 1);
/* Read FIR base */
outb(0x62, cfg_base);
fir_io = inb(cfg_base + 1) << 8;
outb(0x63, cfg_base);
fir_io |= inb(cfg_base + 1);
outb(0x2b, cfg_base); /* ??? */
if (fir_io) {
if (ircc_open(fir_io, sir_io) == 0)
ret=0;
}
/* Exit configuration */
outb(0xaa, cfg_base);
return ret;
}
static int __init smc_superio_fdc(unsigned short cfg_base)
{
if (check_region(cfg_base, 2) < 0) {
IRDA_DEBUG(0, "%s: can't get cfg_base of 0x%03x\n", __FUNCTION__ ,
cfg_base);
return -1;
}
if (!smc_superio_flat(fdc_chips_flat,cfg_base,"FDC")||!smc_superio_paged(fdc_chips_paged,cfg_base,"FDC"))
return 0;
return -1;
}
static int __init smc_superio_lpc(unsigned short cfg_base)
{
#if 0
if (check_region(cfg_base, 2) < 0) {
IRDA_DEBUG(0, "%s: can't get cfg_base of 0x%03x\n", __FUNCTION__ ,
cfg_base);
return -1;
}
#endif
if (!smc_superio_flat(lpc_chips_flat,cfg_base,"LPC")||!smc_superio_paged(lpc_chips_paged,cfg_base,"LPC"))
return 0;
return -1;
}
/*
* Function ircc_init ()
*
* Initialize chip. Just try to find out how many chips we are dealing with
* and where they are
*/
int __init ircc_init(void)
{
int ret=-ENODEV;
IRDA_DEBUG(0, "%s\n", __FUNCTION__ );
dev_count=0;
if ((ircc_fir>0)&&(ircc_sir>0)) {
MESSAGE(" Overriding FIR address 0x%04x\n", ircc_fir);
MESSAGE(" Overriding SIR address 0x%04x\n", ircc_sir);
if (ircc_open(ircc_fir, ircc_sir) == 0)
return 0;
return -ENODEV;
}
/* try user provided configuration register base address */
if (ircc_cfg>0) {
MESSAGE(" Overriding configuration address 0x%04x\n", ircc_cfg);
if (!smc_superio_fdc(ircc_cfg))
ret=0;
}
/* Trys to open for all the SMC chipsets we know about */
IRDA_DEBUG(0,
"%s Try to open all known SMC chipsets\n", __FUNCTION__ );
if (!smc_superio_fdc(0x3f0))
ret=0;
if (!smc_superio_fdc(0x370))
ret=0;
if (!smc_superio_fdc(0xe0))
ret=0;
if (!smc_superio_lpc(0x2e))
ret=0;
if (!smc_superio_lpc(0x4e))
ret=0;
return ret;
}
/*
* Function ircc_open (iobase, irq)
*
* Try to open driver instance
*
*/
static int __init ircc_open(unsigned int fir_base, unsigned int sir_base)
{
struct ircc_cb *self;
struct irport_cb *irport;
unsigned char low, high, chip, config, dma, irq, version;
unsigned long flags;
IRDA_DEBUG(0, "%s\n", __FUNCTION__ );
if (check_region(fir_base, CHIP_IO_EXTENT) < 0) {
IRDA_DEBUG(0, "%s: can't get fir_base of 0x%03x\n", __FUNCTION__ ,
fir_base);
return -ENODEV;
}
#if POSSIBLE_USED_BY_SERIAL_DRIVER
if (check_region(sir_base, CHIP_IO_EXTENT) < 0) {
IRDA_DEBUG(0, "%s: can't get sir_base of 0x%03x\n", __FUNCTION__ ,
sir_base);
return -ENODEV;
}
#endif
register_bank(fir_base, 3);
high = inb(fir_base+IRCC_ID_HIGH);
low = inb(fir_base+IRCC_ID_LOW);
chip = inb(fir_base+IRCC_CHIP_ID);
version = inb(fir_base+IRCC_VERSION);
config = inb(fir_base+IRCC_INTERFACE);
irq = config >> 4 & 0x0f;
dma = config & 0x0f;
if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) {
IRDA_DEBUG(0,
"%s(), addr 0x%04x - no device found!\n", __FUNCTION__ , fir_base);
return -ENODEV;
}
MESSAGE("SMC IrDA Controller found\n IrCC version %d.%d, "
"firport 0x%03x, sirport 0x%03x dma=%d, irq=%d\n",
chip & 0x0f, version, fir_base, sir_base, dma, irq);
if (dev_count >= DIM(dev_self)) {
IRDA_DEBUG(0,
"%s(), to many devices!\n", __FUNCTION__ );
return -ENOMEM;
}
/*
* Allocate new instance of the driver
*/
self = kmalloc(sizeof(struct ircc_cb), GFP_KERNEL);
if (self == NULL) {
ERROR("%s, Can't allocate memory for control block!\n",
driver_name);
return -ENOMEM;
}
memset(self, 0, sizeof(struct ircc_cb));
/* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
self->rx_buff.truesize = 4000;
self->tx_buff.truesize = 4000;
self->rx_buff.head = (u8 *) kmalloc(self->rx_buff.truesize,
GFP_KERNEL|GFP_DMA);
if (self->rx_buff.head == NULL) {
ERROR("%s, Can't allocate memory for receive buffer!\n",
driver_name);
kfree(self);
return -ENOMEM;
}
self->tx_buff.head = (u8 *) kmalloc(self->tx_buff.truesize,
GFP_KERNEL|GFP_DMA);
if (self->tx_buff.head == NULL) {
ERROR("%s, Can't allocate memory for transmit buffer!\n",
driver_name);
kfree(self->rx_buff.head);
kfree(self);
return -ENOMEM;
}
irport = irport_open(dev_count, sir_base, irq);
if (!irport) {
kfree(self->tx_buff.head);
kfree(self->rx_buff.head);
kfree(self);
return -ENODEV;
}
memset(self->rx_buff.head, 0, self->rx_buff.truesize);
memset(self->tx_buff.head, 0, self->tx_buff.truesize);
/* Need to store self somewhere */
dev_self[dev_count++] = self;
/* Steal the network device from irport */
self->netdev = irport->netdev;
self->irport = irport;
irport->priv = self;
/* Keep track of module usage */
SET_MODULE_OWNER(self->netdev);
/* Initialize IO */
self->io = &irport->io;
self->io->fir_base = fir_base;
self->io->sir_base = sir_base; /* Used by irport */
self->io->fir_ext = CHIP_IO_EXTENT;
self->io->sir_ext = 8; /* Used by irport */
if (ircc_irq < 255) {
if (ircc_irq!=irq)
MESSAGE("%s, Overriding IRQ - chip says %d, using %d\n",
driver_name, irq, ircc_irq);
self->io->irq = ircc_irq;
}
else
self->io->irq = irq;
if (ircc_dma < 255) {
if (ircc_dma!=dma)
MESSAGE("%s, Overriding DMA - chip says %d, using %d\n",
driver_name, dma, ircc_dma);
self->io->dma = ircc_dma;
}
else
self->io->dma = dma;
request_region(self->io->fir_base, CHIP_IO_EXTENT, driver_name);
/* Don't allow irport to change under us - Jean II */
spin_lock_irqsave(&self->irport->lock, flags);
/* Initialize QoS for this device */
irda_init_max_qos_capabilies(&irport->qos);
/* The only value we must override it the baudrate */
irport->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8);
irport->qos.min_turn_time.bits = 0x07;
irport->qos.window_size.bits = 0x01;
irda_qos_bits_to_value(&irport->qos);
irport->flags = IFF_FIR|IFF_MIR|IFF_SIR|IFF_DMA|IFF_PIO;
self->rx_buff.in_frame = FALSE;
self->rx_buff.state = OUTSIDE_FRAME;
self->tx_buff.data = self->tx_buff.head;
self->rx_buff.data = self->rx_buff.head;
/* Override the speed change function, since we must control it now */
irport->change_speed = &ircc_change_speed;
irport->interrupt = &ircc_interrupt;
self->netdev->open = &ircc_net_open;
self->netdev->stop = &ircc_net_close;
irport_start(self->irport);
spin_unlock_irqrestore(&self->irport->lock, flags);
self->pmdev = pm_register(PM_SYS_DEV, PM_SYS_IRDA, ircc_pmproc);
if (self->pmdev)
self->pmdev->data = self;
/* Power on device */
outb(0x00, fir_base+IRCC_MASTER);
return 0;
}
/*
* Function ircc_change_speed (self, baud)
*
* Change the speed of the device
*
* This function should be called with irq off and spin-lock.
*/
static void ircc_change_speed(void *priv, u32 speed)
{
int iobase, ir_mode, ctrl, fast;
struct ircc_cb *self = (struct ircc_cb *) priv;
struct net_device *dev;
IRDA_DEBUG(0, "%s\n", __FUNCTION__ );
ASSERT(self != NULL, return;);
dev = self->netdev;
iobase = self->io->fir_base;
/* Update accounting for new speed */
self->io->speed = speed;
outb(IRCC_MASTER_RESET, iobase+IRCC_MASTER);
outb(0x00, iobase+IRCC_MASTER);
switch (speed) {
default:
IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", __FUNCTION__ ,
speed);
/* FALLTHROUGH */
case 9600:
case 19200:
case 38400:
case 57600:
case 115200:
ir_mode = IRCC_CFGA_IRDA_SIR_A;
ctrl = 0;
fast = 0;
break;
case 576000:
ir_mode = IRCC_CFGA_IRDA_HDLC;
ctrl = IRCC_CRC;
fast = 0;
IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__ );
break;
case 1152000:
ir_mode = IRCC_CFGA_IRDA_HDLC;
ctrl = IRCC_1152 | IRCC_CRC;
fast = 0;
IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__ );
break;
case 4000000:
ir_mode = IRCC_CFGA_IRDA_4PPM;
ctrl = IRCC_CRC;
fast = IRCC_LCR_A_FAST;
IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__ );
break;
}
register_bank(iobase, 0);
outb(0, iobase+IRCC_IER);
outb(IRCC_MASTER_INT_EN, iobase+IRCC_MASTER);
/* Make special FIR init if necessary */
if (speed > 115200) {
/* No need to lock, already locked - Jean II */
irport_stop(self->irport);
/* Install FIR transmit handler */
dev->hard_start_xmit = &ircc_hard_xmit;
/*
* Don't know why we have to do this, but FIR interrupts
* stops working if we remove it.
*/
/* outb(UART_MCR_OUT2, self->io->sir_base + UART_MCR); */
/* Be ready for incoming frames */
ircc_dma_receive(self, iobase);
} else {
/* Install SIR transmit handler */
dev->hard_start_xmit = &irport_hard_xmit;
/* No need to lock, already locked - Jean II */
irport_start(self->irport);
IRDA_DEBUG(0,
"%s(), using irport to change speed to %d\n", __FUNCTION__ , speed);
irport_change_speed(self->irport, speed);
}
register_bank(iobase, 1);
outb(((inb(iobase+IRCC_SCE_CFGA) & 0x87) | ir_mode),
iobase+IRCC_SCE_CFGA);
#ifdef SMC_669 /* Uses pin 88/89 for Rx/Tx */
outb(((inb(iobase+IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
iobase+IRCC_SCE_CFGB);
#else
outb(((inb(iobase+IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
iobase+IRCC_SCE_CFGB);
#endif
(void) inb(iobase+IRCC_FIFO_THRESHOLD);
outb(64, iobase+IRCC_FIFO_THRESHOLD);
register_bank(iobase, 4);
outb((inb(iobase+IRCC_CONTROL) & 0x30) | ctrl, iobase+IRCC_CONTROL);
register_bank(iobase, 0);
outb(fast, iobase+IRCC_LCR_A);
netif_start_queue(dev);
}
/*
* Function ircc_hard_xmit (skb, dev)
*
* Transmit the frame!
*
*/
static int ircc_hard_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct irport_cb *irport;
struct ircc_cb *self;
unsigned long flags;
s32 speed;
int iobase;
int mtt;
irport = (struct irport_cb *) dev->priv;
self = (struct ircc_cb *) irport->priv;
ASSERT(self != NULL, return 0;);
iobase = self->io->fir_base;
netif_stop_queue(dev);
/* Make sure tests *& speed change are atomic */
spin_lock_irqsave(&self->irport->lock, flags);
/* Note : you should make sure that speed changes are not going
* to corrupt any outgoing frame. Look at nsc-ircc for the gory
* details - Jean II */
/* Check if we need to change the speed after this frame */
speed = irda_get_next_speed(skb);
if ((speed != self->io->speed) && (speed != -1)) {
/* Check for empty frame */
if (!skb->len) {
ircc_change_speed(self, speed);
dev->trans_start = jiffies;
spin_unlock_irqrestore(&self->irport->lock, flags);
dev_kfree_skb(skb);
return 0;
} else
self->new_speed = speed;
}
memcpy(self->tx_buff.head, skb->data, skb->len);
self->tx_buff.len = skb->len;
self->tx_buff.data = self->tx_buff.head;
mtt = irda_get_mtt(skb);
if (mtt) {
int bofs;
/*
* Compute how many BOFs (STA or PA's) we need to waste the
* min turn time given the speed of the link.
*/
bofs = mtt * (self->io->speed / 1000) / 8000;
if (bofs > 4095)
bofs = 4095;
ircc_dma_xmit(self, iobase, bofs);
} else {
/* Transmit frame */
ircc_dma_xmit(self, iobase, 0);
}
dev->trans_start = jiffies;
spin_unlock_irqrestore(&self->irport->lock, flags);
dev_kfree_skb(skb);
return 0;
}
/*
* Function ircc_dma_xmit (self, iobase)
*
* Transmit data using DMA
*
*/
static void ircc_dma_xmit(struct ircc_cb *self, int iobase, int bofs)
{
u8 ctrl;
IRDA_DEBUG(2, "%s\n", __FUNCTION__ );
#if 0
/* Disable Rx */
register_bank(iobase, 0);
outb(0x00, iobase+IRCC_LCR_B);
#endif
register_bank(iobase, 1);
outb(inb(iobase+IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
iobase+IRCC_SCE_CFGB);
self->io->direction = IO_XMIT;
/* Set BOF additional count for generating the min turn time */
register_bank(iobase, 4);
outb(bofs & 0xff, iobase+IRCC_BOF_COUNT_LO);
ctrl = inb(iobase+IRCC_CONTROL) & 0xf0;
outb(ctrl | ((bofs >> 8) & 0x0f), iobase+IRCC_BOF_COUNT_HI);
/* Set max Tx frame size */
outb(self->tx_buff.len >> 8, iobase+IRCC_TX_SIZE_HI);
outb(self->tx_buff.len & 0xff, iobase+IRCC_TX_SIZE_LO);
/* Setup DMA controller (must be done after enabling chip DMA) */
setup_dma(self->io->dma, self->tx_buff.data, self->tx_buff.len,
DMA_TX_MODE);
outb(UART_MCR_OUT2, self->io->sir_base + UART_MCR);
/* Enable burst mode chip Tx DMA */
register_bank(iobase, 1);
outb(inb(iobase+IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
IRCC_CFGB_DMA_BURST, iobase+IRCC_SCE_CFGB);
/* Enable interrupt */
outb(IRCC_MASTER_INT_EN, iobase+IRCC_MASTER);
register_bank(iobase, 0);
outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase+IRCC_IER);
/* Enable transmit */
outb(IRCC_LCR_B_SCE_TRANSMIT|IRCC_LCR_B_SIP_ENABLE, iobase+IRCC_LCR_B);
}
/*
* Function ircc_dma_xmit_complete (self)
*
* The transfer of a frame in finished. This function will only be called
* by the interrupt handler
*
*/
static void ircc_dma_xmit_complete(struct ircc_cb *self, int iobase)
{
IRDA_DEBUG(2, "%s\n", __FUNCTION__ );
#if 0
/* Disable Tx */
register_bank(iobase, 0);
outb(0x00, iobase+IRCC_LCR_B);
#endif
register_bank(self->io->fir_base, 1);
outb(inb(self->io->fir_base+IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
self->io->fir_base+IRCC_SCE_CFGB);
/* Check for underrrun! */
register_bank(iobase, 0);
if (inb(iobase+IRCC_LSR) & IRCC_LSR_UNDERRUN) {
self->irport->stats.tx_errors++;
self->irport->stats.tx_fifo_errors++;
/* Reset error condition */
register_bank(iobase, 0);
outb(IRCC_MASTER_ERROR_RESET, iobase+IRCC_MASTER);
outb(0x00, iobase+IRCC_MASTER);
} else {
self->irport->stats.tx_packets++;
self->irport->stats.tx_bytes += self->tx_buff.len;
}
/* Check if it's time to change the speed */
if (self->new_speed) {
ircc_change_speed(self, self->new_speed);
self->new_speed = 0;
}
netif_wake_queue(self->netdev);
}
/*
* Function ircc_dma_receive (self)
*
* Get ready for receiving a frame. The device will initiate a DMA
* if it starts to receive a frame.
*
*/
static int ircc_dma_receive(struct ircc_cb *self, int iobase)
{
#if 0
/* Turn off chip DMA */
register_bank(iobase, 1);
outb(inb(iobase+IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
iobase+IRCC_SCE_CFGB);
#endif
setup_dma(self->io->dma, self->rx_buff.data, self->rx_buff.truesize,
DMA_RX_MODE);
/* Set max Rx frame size */
register_bank(iobase, 4);
outb((2050 >> 8) & 0x0f, iobase+IRCC_RX_SIZE_HI);
outb(2050 & 0xff, iobase+IRCC_RX_SIZE_LO);
self->io->direction = IO_RECV;
self->rx_buff.data = self->rx_buff.head;
/* Setup DMA controller */
/* Enable receiver */
register_bank(iobase, 0);
outb(IRCC_LCR_B_SCE_RECEIVE | IRCC_LCR_B_SIP_ENABLE,
iobase+IRCC_LCR_B);
/* Enable burst mode chip Rx DMA */
register_bank(iobase, 1);
outb(inb(iobase+IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
IRCC_CFGB_DMA_BURST, iobase+IRCC_SCE_CFGB);
return 0;
}
/*
* Function ircc_dma_receive_complete (self)
*
* Finished with receiving frames
*
*/
static void ircc_dma_receive_complete(struct ircc_cb *self, int iobase)
{
struct sk_buff *skb;
int len, msgcnt;
IRDA_DEBUG(2, "%s\n", __FUNCTION__ );
#if 0
/* Disable Rx */
register_bank(iobase, 0);
outb(0x00, iobase+IRCC_LCR_B);
#endif
register_bank(iobase, 0);
msgcnt = inb(iobase+IRCC_LCR_B) & 0x08;
IRDA_DEBUG(2, "%s: dma count = %d\n", __FUNCTION__ ,
get_dma_residue(self->io->dma));
len = self->rx_buff.truesize - get_dma_residue(self->io->dma);
/* Remove CRC */
if (self->io->speed < 4000000)
len -= 2;
else
len -= 4;
if ((len < 2) || (len > 2050)) {
WARNING("%s(), bogus len=%d\n", __FUNCTION__, len);
return;
}
IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __FUNCTION__ , msgcnt, len);
skb = dev_alloc_skb(len+1);
if (!skb) {
WARNING("%s(), memory squeeze, dropping frame.\n", __FUNCTION__);
return;
}
/* Make sure IP header gets aligned */
skb_reserve(skb, 1);
memcpy(skb_put(skb, len), self->rx_buff.data, len);
self->irport->stats.rx_packets++;
self->irport->stats.rx_bytes += len;
skb->dev = self->netdev;
skb->mac.raw = skb->data;
skb->protocol = htons(ETH_P_IRDA);
netif_rx(skb);
self->netdev->last_rx = jiffies;
}
/*
* Function ircc_interrupt (irq, dev_id, regs)
*
* An interrupt from the chip has arrived. Time to do some work
*
*/
static irqreturn_t ircc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
struct net_device *dev = (struct net_device *) dev_id;
struct irport_cb *irport;
struct ircc_cb *self;
int iobase, iir;
if (dev == NULL) {
printk(KERN_WARNING "%s: irq %d for unknown device.\n",
driver_name, irq);
return IRQ_NONE;
}
irport = (struct irport_cb *) dev->priv;
ASSERT(irport != NULL, return IRQ_NONE;);
self = (struct ircc_cb *) irport->priv;
ASSERT(self != NULL, return IRQ_NONE;);
/* Check if we should use the SIR interrupt handler */
if (self->io->speed < 576000) {
/* Will spinlock itself - Jean II */
irport_interrupt(irq, dev_id, regs);
return IRQ_HANDLED;
}
iobase = self->io->fir_base;
spin_lock(&self->irport->lock);
register_bank(iobase, 0);
iir = inb(iobase+IRCC_IIR);
/* Disable interrupts */
outb(0, iobase+IRCC_IER);
IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __FUNCTION__ , iir);
if (iir & IRCC_IIR_EOM) {
if (self->io->direction == IO_RECV)
ircc_dma_receive_complete(self, iobase);
else
ircc_dma_xmit_complete(self, iobase);
ircc_dma_receive(self, iobase);
}
/* Enable interrupts again */
register_bank(iobase, 0);
outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, iobase+IRCC_IER);
spin_unlock(&self->irport->lock);
return IRQ_HANDLED;
}
#if 0 /* unused */
/*
* Function ircc_is_receiving (self)
*
* Return TRUE is we are currently receiving a frame
*
*/
static int ircc_is_receiving(struct ircc_cb *self)
{
int status = FALSE;
/* int iobase; */
IRDA_DEBUG(0, "%s\n", __FUNCTION__ );
ASSERT(self != NULL, return FALSE;);
IRDA_DEBUG(0, "%s: dma count = %d\n", __FUNCTION__ ,
get_dma_residue(self->io->dma));
status = (self->rx_buff.state != OUTSIDE_FRAME);
return status;
}
#endif /* unused */
/*
* Function ircc_net_open (dev)
*
* Start the device
*
*/
static int ircc_net_open(struct net_device *dev)
{
struct irport_cb *irport;
struct ircc_cb *self;
int iobase;
IRDA_DEBUG(0, "%s\n", __FUNCTION__ );
ASSERT(dev != NULL, return -1;);
irport = (struct irport_cb *) dev->priv;
self = (struct ircc_cb *) irport->priv;
ASSERT(self != NULL, return 0;);
iobase = self->io->fir_base;
irport_net_open(dev); /* irport allocates the irq */
/*
* Always allocate the DMA channel after the IRQ,
* and clean up on failure.
*/
if (request_dma(self->io->dma, dev->name)) {
irport_net_close(dev);
WARNING("%s(), unable to allocate DMA=%d\n", __FUNCTION__, self->io->dma);
return -EAGAIN;
}
return 0;
}
/*
* Function ircc_net_close (dev)
*
* Stop the device
*
*/
static int ircc_net_close(struct net_device *dev)
{
struct irport_cb *irport;
struct ircc_cb *self;
int iobase;
IRDA_DEBUG(0, "%s()\n", __FUNCTION__);
ASSERT(dev != NULL, return -1;);
irport = (struct irport_cb *) dev->priv;
self = (struct ircc_cb *) irport->priv;
ASSERT(self != NULL, return 0;);
iobase = self->io->fir_base;
irport_net_close(dev);
disable_dma(self->io->dma);
free_dma(self->io->dma);
return 0;
}
static void ircc_suspend(struct ircc_cb *self)
{
MESSAGE("%s, Suspending\n", driver_name);
if (self->io->suspended)
return;
ircc_net_close(self->netdev);
self->io->suspended = 1;
}
static void ircc_wakeup(struct ircc_cb *self)
{
if (!self->io->suspended)
return;
/* The code was doing a "cli()" here, but this can't be right.
* If you need protection, do it in net_open with a spinlock
* or give a good reason. - Jean II */
ircc_net_open(self->netdev);
MESSAGE("%s, Waking up\n", driver_name);
}
static int ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data)
{
struct ircc_cb *self = (struct ircc_cb*) dev->data;
if (self) {
switch (rqst) {
case PM_SUSPEND:
ircc_suspend(self);
break;
case PM_RESUME:
ircc_wakeup(self);
break;
}
}
return 0;
}
/*
* Function ircc_close (self)
*
* Close driver instance
*
*/
static int __exit ircc_close(struct ircc_cb *self)
{
int iobase;
IRDA_DEBUG(0, "%s\n", __FUNCTION__ );
ASSERT(self != NULL, return -1;);
iobase = self->irport->io.fir_base;
if (self->pmdev)
pm_unregister(self->pmdev);
/* This will destroy irport */
irport_close(self->irport);
/* Stop interrupts */
register_bank(iobase, 0);
outb(0, iobase+IRCC_IER);
outb(IRCC_MASTER_RESET, iobase+IRCC_MASTER);
outb(0x00, iobase+IRCC_MASTER);
#if 0
/* Reset to SIR mode */
register_bank(iobase, 1);
outb(IRCC_CFGA_IRDA_SIR_A|IRCC_CFGA_TX_POLARITY, iobase+IRCC_SCE_CFGA);
outb(IRCC_CFGB_IR, iobase+IRCC_SCE_CFGB);
#endif
/* Release the PORT that this driver is using */
IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__ , iobase);
release_region(iobase, CHIP_IO_EXTENT);
if (self->tx_buff.head)
kfree(self->tx_buff.head);
if (self->rx_buff.head)
kfree(self->rx_buff.head);
kfree(self);
return 0;
}
static int __init smc_init(void)
{
return ircc_init();
}
void __exit smc_cleanup(void)
{
int i;
IRDA_DEBUG(0, "%s\n", __FUNCTION__ );
for (i=0; i < 2; i++) {
if (dev_self[i])
ircc_close(dev_self[i]);
}
}
module_init(smc_init);
module_exit(smc_cleanup);
MODULE_AUTHOR("Thomas Davis <tadavis@jps.net>");
MODULE_DESCRIPTION("SMC IrCC controller driver");
MODULE_LICENSE("GPL");
MODULE_PARM(ircc_dma, "1i");
MODULE_PARM_DESC(ircc_dma, "DMA channel");
MODULE_PARM(ircc_irq, "1i");
MODULE_PARM_DESC(ircc_irq, "IRQ line");
MODULE_PARM(ircc_fir, "1-4i");
MODULE_PARM_DESC(ircc_fir, "FIR Base Address");
MODULE_PARM(ircc_sir, "1-4i");
MODULE_PARM_DESC(ircc_sir, "SIR Base Address");
MODULE_PARM(ircc_cfg, "1-4i");
MODULE_PARM_DESC(ircc_cfg, "Configuration register base address");
drivers/net/irda/toshoboe.c deleted 100644 → 0
View file @ 8736a430
/*********************************************************************
*
* Filename: toshoboe.c
* Version: 0.1
* Description: Driver for the Toshiba OBOE (or type-O or 700 or 701)
* FIR Chipset.
* Status: Experimental.
* Author: James McKenzie <james@fishsoup.dhs.org>
* Created at: Sat May 8 12:35:27 1999
* Modified: Paul Bristow <paul.bristow@technologist.com>
* Modified: Mon Nov 11 19:10:05 1999
*
* Copyright (c) 1999-2000 James McKenzie, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* Neither James McKenzie nor Cambridge University admit liability nor
* provide warranty for any of this software. This material is
* provided "AS-IS" and at no charge.
*
* Applicable Models : Libretto 100CT. and many more
* Toshiba refers to this chip as the type-O IR port.
*
********************************************************************/
/* This driver is experimental, I have only three ir devices */
/* an olivetti notebook which doesn't have FIR, a toshiba libretto, and */
/* an hp printer, this works fine at 4MBPS with my HP printer */
static char *rcsid = "$Id: toshoboe.c,v 1.91 1999/06/29 14:21:06 root Exp $";
/* Define this to have only one frame in the XMIT or RECV queue */
/* Toshiba's drivers do this, but it disables back to back tansfers */
/* I think that the chip may have some problems certainly, I have */
/* seen it jump over tasks in the taskfile->xmit with this turned on */
#define ONETASK
/* To adjust the number of tasks in use edit toshoboe.h */
/* Define this to enable FIR and MIR support */
#define ENABLE_FAST
/* Size of IO window */
#define CHIP_IO_EXTENT 0x1f
/* Transmit and receive buffer sizes, adjust at your peril */
#define RX_BUF_SZ 4196
#define TX_BUF_SZ 4196
/* No user servicable parts below here */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/rtnetlink.h>
#include <asm/system.h>
#include <asm/io.h>
#include <net/irda/wrapper.h>
#include <net/irda/irda.h>
#include <net/irda/irda_device.h>
#include <linux/pm.h>
#include <net/irda/toshoboe.h>
#define PCI_DEVICE_ID_FIR701b 0x0d01
static struct pci_device_id toshoboe_pci_tbl[] = {
{ PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_FIR701, PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_FIR701b, PCI_ANY_ID, PCI_ANY_ID, },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(pci, toshoboe_pci_tbl);
static const char *driver_name = "toshoboe";
static int max_baud = 4000000;
/* Shutdown the chip and point the taskfile reg somewhere else */
static void
toshoboe_stopchip (struct toshoboe_cb *self)
{
IRDA_DEBUG (4, "%s()\n", __FUNCTION__ );
outb_p (0x0e, OBOE_REG_11);
outb_p (0x00, OBOE_RST);
outb_p (0x3f, OBOE_TFP2); /*Write the taskfile address */
outb_p (0xff, OBOE_TFP1);
outb_p (0xff, OBOE_TFP0);
outb_p (0x0f, OBOE_REG_1B);
outb_p (0xff, OBOE_REG_1A);
outb_p (0x00, OBOE_ISR); /*FIXME: should i do this to disbale ints */
outb_p (0x80, OBOE_RST);
outb_p (0xe, OBOE_LOCK);
}
/*Set the baud rate */
static void
toshoboe_setbaud (struct toshoboe_cb *self, int baud)
{
unsigned long flags;
IRDA_DEBUG (4, "%s()\n", __FUNCTION__ );
printk (KERN_WARNING "ToshOboe: setting baud to %d\n", baud);
save_flags (flags);
cli ();
switch (baud)
{
case 2400:
outb_p (OBOE_PMDL_SIR, OBOE_PMDL);
outb_p (OBOE_SMDL_SIR, OBOE_SMDL);
outb_p (0xbf, OBOE_UDIV);
break;
case 4800:
outb_p (OBOE_PMDL_SIR, OBOE_PMDL);
outb_p (OBOE_SMDL_SIR, OBOE_SMDL);
outb_p (0x5f, OBOE_UDIV);
break;
case 9600:
outb_p (OBOE_PMDL_SIR, OBOE_PMDL);
outb_p (OBOE_SMDL_SIR, OBOE_SMDL);
outb_p (0x2f, OBOE_UDIV);
break;
case 19200:
outb_p (OBOE_PMDL_SIR, OBOE_PMDL);
outb_p (OBOE_SMDL_SIR, OBOE_SMDL);
outb_p (0x17, OBOE_UDIV);
break;
case 38400:
outb_p (OBOE_PMDL_SIR, OBOE_PMDL);
outb_p (OBOE_SMDL_SIR, OBOE_SMDL);
outb_p (0xb, OBOE_UDIV);
break;
case 57600:
outb_p (OBOE_PMDL_SIR, OBOE_PMDL);
outb_p (OBOE_SMDL_SIR, OBOE_SMDL);
outb_p (0x7, OBOE_UDIV);
break;
case 115200:
outb_p (OBOE_PMDL_SIR, OBOE_PMDL);
outb_p (OBOE_SMDL_SIR, OBOE_SMDL);
outb_p (0x3, OBOE_UDIV);
break;
case 1152000:
outb_p (OBOE_PMDL_MIR, OBOE_PMDL);
outb_p (OBOE_SMDL_MIR, OBOE_SMDL);
outb_p (0x1, OBOE_UDIV);
break;
case 4000000:
outb_p (OBOE_PMDL_FIR, OBOE_PMDL);
outb_p (OBOE_SMDL_FIR, OBOE_SMDL);
outb_p (0x0, OBOE_UDIV);
break;
}
restore_flags (flags);
outb_p (0x00, OBOE_RST);
outb_p (0x80, OBOE_RST);
outb_p (0x01, OBOE_REG_9);
self->io.speed = baud;
}
/* Wake the chip up and get it looking at the taskfile */
static void
toshoboe_startchip (struct toshoboe_cb *self)
{
__u32 physaddr;
IRDA_DEBUG (4, "%s()\n", __FUNCTION__ );
outb_p (0, OBOE_LOCK);
outb_p (0, OBOE_RST);
outb_p (OBOE_NTR_VAL, OBOE_NTR);
outb_p (0xf0, OBOE_REG_D);
outb_p (0xff, OBOE_ISR);
outb_p (0x0f, OBOE_REG_1B);
outb_p (0xff, OBOE_REG_1A);
physaddr = virt_to_bus (self->taskfile);
outb_p ((physaddr >> 0x0a) & 0xff, OBOE_TFP0);
outb_p ((physaddr >> 0x12) & 0xff, OBOE_TFP1);
outb_p ((physaddr >> 0x1a) & 0x3f, OBOE_TFP2);
outb_p (0x0e, OBOE_REG_11);
outb_p (0x80, OBOE_RST);
toshoboe_setbaud (self, 9600);
}
/*Let the chip look at memory */
static void
toshoboe_enablebm (struct toshoboe_cb *self)
{
IRDA_DEBUG (4, "%s()\n", __FUNCTION__ );
pci_set_master (self->pdev);
}
/*Don't let the chip look at memory */
static void
toshoboe_disablebm (struct toshoboe_cb *self)
{
__u8 command;
IRDA_DEBUG (4, "%s()\n", __FUNCTION__ );
pci_read_config_byte (self->pdev, PCI_COMMAND, &command);
command &= ~PCI_COMMAND_MASTER;
pci_write_config_byte (self->pdev, PCI_COMMAND, command);
}
/*setup the taskfile */
static void
toshoboe_initbuffs (struct toshoboe_cb *self)
{
int i;
unsigned long flags;
IRDA_DEBUG (4, "%s()\n", __FUNCTION__ );
save_flags (flags);
cli ();
for (i = 0; i < TX_SLOTS; ++i)
{
self->taskfile->xmit[i].len = 0;
self->taskfile->xmit[i].control = 0x00;
self->taskfile->xmit[i].buffer = virt_to_bus (self->xmit_bufs[i]);
}
for (i = 0; i < RX_SLOTS; ++i)
{
self->taskfile->recv[i].len = 0;
self->taskfile->recv[i].control = 0x83;
self->taskfile->recv[i].buffer = virt_to_bus (self->recv_bufs[i]);
}
restore_flags (flags);
}
/*Transmit something */
static int
toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev)
{
struct toshoboe_cb *self;
__s32 speed;
int mtt, len;
self = (struct toshoboe_cb *) dev->priv;
ASSERT (self != NULL, return 0;
);
/* Check if we need to change the speed */
speed = irda_get_next_speed(skb);
if ((speed != self->io.speed) && (speed != -1)) {
/* Check for empty frame */
if (!skb->len) {
toshoboe_setbaud(self, speed);
dev_kfree_skb(skb);
return 0;
} else
self->new_speed = speed;
}
netif_stop_queue(dev);
if (self->stopped) {
dev_kfree_skb(skb);
return 0;
}
#ifdef ONETASK
if (self->txpending)
return -EBUSY;
self->txs = inb_p (OBOE_XMTT) - OBOE_XMTT_OFFSET;
self->txs &= 0x3f;
#endif
if (self->taskfile->xmit[self->txs].control)
return -EBUSY;
if (inb_p (OBOE_RST) & OBOE_RST_WRAP)
{
len = async_wrap_skb (skb, self->xmit_bufs[self->txs], TX_BUF_SZ);
}
else
{
len = skb->len;
memcpy (self->xmit_bufs[self->txs], skb->data, len);
}
self->taskfile->xmit[self->txs].len = len & 0x0fff;
outb_p (0, OBOE_RST);
outb_p (0x1e, OBOE_REG_11);
self->taskfile->xmit[self->txs].control = 0x84;
mtt = irda_get_mtt (skb);
if (mtt)
udelay (mtt);
self->txpending++;
/*FIXME: ask about busy,media_busy stuff, for the moment */
/*busy means can't queue any more */
#ifndef ONETASK
if (self->txpending != TX_SLOTS)
{
netif_wake_queue(dev);
}
#endif
outb_p (0x80, OBOE_RST);
outb_p (1, OBOE_REG_9);
self->txs++;
self->txs %= TX_SLOTS;
dev_kfree_skb (skb);
return 0;
}
/*interrupt handler */
static irqreturn_t
toshoboe_interrupt (int irq, void *dev_id, struct pt_regs *regs)
{
struct toshoboe_cb *self = (struct toshoboe_cb *) dev_id;
__u8 irqstat;
struct sk_buff *skb;
if (self == NULL)
{
printk (KERN_WARNING "%s: irq %d for unknown device.\n",
driver_name, irq);
return IRQ_NONE;
}
IRDA_DEBUG (4, "%s()\n", __FUNCTION__ );
irqstat = inb_p (OBOE_ISR);
/* woz it us */
if (!(irqstat & 0xf8))
return IRQ_NONE;
outb_p (irqstat, OBOE_ISR); /*Acknologede it */
/* Txdone */
if (irqstat & OBOE_ISR_TXDONE)
{
self->txpending--;
self->stats.tx_packets++;
if (self->new_speed) {
toshoboe_setbaud(self, self->new_speed);
self->new_speed = 0;
}
/* Tell network layer that we want more frames */
netif_wake_queue(self->netdev);
}
if (irqstat & OBOE_ISR_RXDONE)
{
#ifdef ONETASK
self->rxs = inb_p (OBOE_RCVT);
self->rxs += (RX_SLOTS - 1);
self->rxs %= RX_SLOTS;
#else
while (self->taskfile->recv[self->rxs].control == 0)
#endif
{
int len = self->taskfile->recv[self->rxs].len;
if (len > 2)
len -= 2;
skb = dev_alloc_skb (len + 1);
if (skb)
{
skb_reserve (skb, 1);
skb_put (skb, len);
memcpy (skb->data, self->recv_bufs[self->rxs], len);
self->stats.rx_packets++;
skb->dev = self->netdev;
skb->mac.raw = skb->data;
skb->protocol = htons (ETH_P_IRDA);
}
else
{
printk (KERN_INFO
"%s(), memory squeeze, dropping frame.\n", __FUNCTION__);
}
self->taskfile->recv[self->rxs].control = 0x83;
self->taskfile->recv[self->rxs].len = 0x0;
self->rxs++;
self->rxs %= RX_SLOTS;
if (skb) {
netif_rx (skb);
self->netdev->last_rx = jiffies;
}
}
}
if (irqstat & OBOE_ISR_20)
{
printk (KERN_WARNING "Oboe_irq: 20\n");
}
if (irqstat & OBOE_ISR_10)
{
printk (KERN_WARNING "Oboe_irq: 10\n");
}
if (irqstat & 0x8)
{
/*FIXME: I think this is a TX or RX error of some sort */
self->stats.tx_errors++;
self->stats.rx_errors++;
}
return IRQ_HANDLED;
}
static int
toshoboe_net_init (struct net_device *dev)
{
IRDA_DEBUG (4, "%s()\n", __FUNCTION__ );
/* Setup to be a normal IrDA network device driver */
irda_device_setup (dev);
/* Insert overrides below this line! */
return 0;
}
static void
toshoboe_initptrs (struct toshoboe_cb *self)
{
unsigned long flags;
save_flags (flags);
cli ();
/*FIXME: need to test this carefully to check which one */
/*of the two possible startup logics the chip uses */
/*although it won't make any difference if no-one xmits durining init */
/*and none what soever if using ONETASK */
self->rxs = inb_p (OBOE_RCVT);
self->txs = inb_p (OBOE_XMTT) - OBOE_XMTT_OFFSET;
#if 0
self->rxs = 0;
self->txs = 0;
#endif
#if 0
self->rxs = RX_SLOTS - 1;
self->txs = 0;
#endif
self->txpending = 0;
restore_flags (flags);
}
static int
toshoboe_net_open (struct net_device *dev)
{
struct toshoboe_cb *self;
char hwname[32];
IRDA_DEBUG (4, "%s()\n", __FUNCTION__ );
ASSERT (dev != NULL, return -1;
);
self = (struct toshoboe_cb *) dev->priv;
ASSERT (self != NULL, return 0;
);
if (self->stopped)
return 0;
if (request_irq (self->io.irq, toshoboe_interrupt,
SA_SHIRQ | SA_INTERRUPT, dev->name, (void *) self))
{
return -EAGAIN;
}
toshoboe_initbuffs (self);
toshoboe_enablebm (self);
toshoboe_startchip (self);
toshoboe_initptrs (self);
/* Ready to play! */
netif_start_queue(dev);
/* Give self a hardware name */
sprintf(hwname, "Toshiba-FIR @ 0x%03x", self->base);
/*
* Open new IrLAP layer instance, now that everything should be
* initialized properly
*/
self->irlap = irlap_open(dev, &self->qos, hwname);
self->open = 1;
MOD_INC_USE_COUNT;
return 0;
}
static int
toshoboe_net_close (struct net_device *dev)
{
struct toshoboe_cb *self;
IRDA_DEBUG (4, "%s()\n", __FUNCTION__ );
ASSERT (dev != NULL, return -1;
);
self = (struct toshoboe_cb *) dev->priv;
/* Stop device */
netif_stop_queue(dev);
/* Stop and remove instance of IrLAP */
if (self->irlap)
irlap_close(self->irlap);
self->irlap = NULL;
self->open = 0;
free_irq (self->io.irq, (void *) self);
if (!self->stopped)
{
toshoboe_stopchip (self);
toshoboe_disablebm (self);
}
MOD_DEC_USE_COUNT;
return 0;
}
/*
* Function toshoboe_net_ioctl (dev, rq, cmd)
*
* Process IOCTL commands for this device
*
*/
static int toshoboe_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct if_irda_req *irq = (struct if_irda_req *) rq;
struct toshoboe_cb *self;
unsigned long flags;
int ret = 0;
ASSERT(dev != NULL, return -1;);
self = dev->priv;
ASSERT(self != NULL, return -1;);
IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__ , dev->name, cmd);
/* Disable interrupts & save flags */
save_flags(flags);
cli();
switch (cmd) {
case SIOCSBANDWIDTH: /* Set bandwidth */
if (!capable(CAP_NET_ADMIN)) {
ret = -EPERM;
goto out;
}
/* toshoboe_setbaud(self, irq->ifr_baudrate); */
/* Just change speed once - inserted by Paul Bristow */
self->new_speed = irq->ifr_baudrate;
break;
case SIOCSMEDIABUSY: /* Set media busy */
if (!capable(CAP_NET_ADMIN)) {
ret = -EPERM;
goto out;
}
irda_device_set_media_busy(self->netdev, TRUE);
break;
case SIOCGRECEIVING: /* Check if we are receiving right now */
irq->ifr_receiving = 0; /* Can't tell */
break;
default:
ret = -EOPNOTSUPP;
}
out:
restore_flags(flags);
return ret;
}
MODULE_DESCRIPTION("Toshiba OBOE IrDA Device Driver");
MODULE_AUTHOR("James McKenzie <james@fishsoup.dhs.org>");
MODULE_LICENSE("GPL");
MODULE_PARM (max_baud, "i");
MODULE_PARM_DESC(max_baus, "Maximum baud rate");
static void
toshoboe_remove (struct pci_dev *pci_dev)
{
int i;
struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev);
IRDA_DEBUG (4, "%s()\n", __FUNCTION__ );
ASSERT (self != NULL, return;
);
if (!self->stopped)
{
toshoboe_stopchip (self);
toshoboe_disablebm (self);
}
release_region (self->io.sir_base, self->io.sir_ext);
for (i = 0; i < TX_SLOTS; ++i)
{
kfree (self->xmit_bufs[i]);
self->xmit_bufs[i] = NULL;
}
for (i = 0; i < RX_SLOTS; ++i)
{
kfree (self->recv_bufs[i]);
self->recv_bufs[i] = NULL;
}
if (self->netdev)
unregister_netdev(self->netdev);
kfree (self->taskfilebuf);
self->taskfilebuf = NULL;
self->taskfile = NULL;
return;
}
static int
toshoboe_probe (struct pci_dev *pci_dev, const struct pci_device_id *pdid)
{
struct toshoboe_cb *self;
struct net_device *dev;
int i = 0;
int ok = 0;
int err;
IRDA_DEBUG (4, "%s()\n", __FUNCTION__ );
if ((err=pci_enable_device(pci_dev)))
return err;
self = kmalloc (sizeof (struct toshoboe_cb), GFP_KERNEL);
if (self == NULL)
{
printk (KERN_ERR "IrDA: Can't allocate memory for "
"IrDA control block!\n");
return -ENOMEM;
}
memset (self, 0, sizeof (struct toshoboe_cb));
self->open = 0;
self->stopped = 0;
self->pdev = pci_dev;
self->base = pci_resource_start(pci_dev,0);
self->io.sir_base = self->base;
self->io.irq = pci_dev->irq;
self->io.sir_ext = CHIP_IO_EXTENT;
self->io.speed = 9600;
/* Lock the port that we need */
if (NULL==request_region (self->io.sir_base, self->io.sir_ext, driver_name))
{
IRDA_DEBUG (0, "%s(), can't get iobase of 0x%03x\n", __FUNCTION__ ,
self->io.sir_base);
err = -EBUSY;
goto freeself;
}
irda_init_max_qos_capabilies (&self->qos);
self->qos.baud_rate.bits = 0;
if (max_baud >= 2400)
self->qos.baud_rate.bits |= IR_2400;
/*if (max_baud>=4800) idev->qos.baud_rate.bits|=IR_4800; */
if (max_baud >= 9600)
self->qos.baud_rate.bits |= IR_9600;
if (max_baud >= 19200)
self->qos.baud_rate.bits |= IR_19200;
if (max_baud >= 115200)
self->qos.baud_rate.bits |= IR_115200;
#ifdef ENABLE_FAST
if (max_baud >= 576000)
self->qos.baud_rate.bits |= IR_576000;
if (max_baud >= 1152000)
self->qos.baud_rate.bits |= IR_1152000;
if (max_baud >= 4000000)
self->qos.baud_rate.bits |= (IR_4000000 << 8);
#endif
self->qos.min_turn_time.bits = 0xff; /*FIXME: what does this do? */
irda_qos_bits_to_value (&self->qos);
self->flags = IFF_SIR | IFF_DMA | IFF_PIO;
#ifdef ENABLE_FAST
if (max_baud >= 576000)
self->flags |= IFF_FIR;
#endif
/* Now setup the endless buffers we need */
self->txs = 0;
self->rxs = 0;
self->taskfilebuf = kmalloc (OBOE_TASK_BUF_LEN, GFP_KERNEL);
if (!self->taskfilebuf)
{
printk (KERN_ERR "toshoboe: kmalloc for DMA failed()\n");
err = -ENOMEM;
goto freeregion;
}
memset (self->taskfilebuf, 0, OBOE_TASK_BUF_LEN);
/*We need to align the taskfile on a taskfile size boundary */
{
__u32 addr;
addr = (__u32) self->taskfilebuf;
addr &= ~(sizeof (struct OboeTaskFile) - 1);
addr += sizeof (struct OboeTaskFile);
self->taskfile = (struct OboeTaskFile *) addr;
}
for (i = 0; i < TX_SLOTS; ++i)
{
self->xmit_bufs[i] = kmalloc (TX_BUF_SZ, GFP_KERNEL | GFP_DMA);
if (self->xmit_bufs[i])
ok++;
}
for (i = 0; i < RX_SLOTS; ++i)
{
self->recv_bufs[i] = kmalloc (TX_BUF_SZ, GFP_KERNEL | GFP_DMA);
if (self->recv_bufs[i])
ok++;
}
if (ok != RX_SLOTS + TX_SLOTS)
{
printk (KERN_ERR "toshoboe: kmalloc for buffers failed()\n");
err = -ENOMEM;
goto freebufs;
}
if (!(dev = dev_alloc("irda%d", &err))) {
ERROR("%s(), dev_alloc() failed!\n", __FUNCTION__);
err = -ENOMEM;
goto freebufs;
}
dev->priv = (void *) self;
self->netdev = dev;
MESSAGE("IrDA: Registered device %s\n", dev->name);
dev->init = toshoboe_net_init;
dev->hard_start_xmit = toshoboe_hard_xmit;
dev->open = toshoboe_net_open;
dev->stop = toshoboe_net_close;
dev->do_ioctl = toshoboe_net_ioctl;
rtnl_lock();
err = register_netdevice(dev);
rtnl_unlock();
if (err) {
ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
/* XXX there is not freeing for dev? */
goto freebufs;
}
pci_set_drvdata(pci_dev,self);
printk (KERN_WARNING "ToshOboe: Using ");
#ifdef ONETASK
printk ("single");
#else
printk ("multiple");
#endif
printk (" tasks, version %s\n", rcsid);
return (0);
freebufs:
for (i = 0; i < TX_SLOTS; ++i)
if (self->xmit_bufs[i])
kfree (self->xmit_bufs[i]);
for (i = 0; i < RX_SLOTS; ++i)
if (self->recv_bufs[i])
kfree (self->recv_bufs[i]);
kfree(self->taskfilebuf);
freeregion:
release_region (self->io.sir_base, self->io.sir_ext);
freeself:
kfree (self);
return err;
}
static int
toshoboe_suspend (struct pci_dev *pci_dev, u32 crap)
{
int i = 10;
struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev);
printk (KERN_WARNING "ToshOboe: suspending\n");
if (!self || self->stopped)
return 0;
self->stopped = 1;
if (!self->open)
return 0;
/*FIXME: can't sleep here wait one second */
while ((i--) && (self->txpending))
udelay (100);
toshoboe_stopchip (self);
toshoboe_disablebm (self);
self->txpending = 0;
return 0;
}
static int
toshoboe_resume (struct pci_dev *pci_dev)
{
struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev);
unsigned long flags;
if (!self)
return 0;
if (!self->stopped)
return 0;
if (!self->open)
{
self->stopped = 0;
return 0;
}
save_flags (flags);
cli ();
toshoboe_initbuffs (self);
toshoboe_enablebm (self);
toshoboe_startchip (self);
toshoboe_setbaud (self, self->io.speed);
toshoboe_initptrs (self);
netif_wake_queue(self->netdev);
restore_flags (flags);
printk (KERN_WARNING "ToshOboe: waking up\n");
return 0;
}
static struct pci_driver toshoboe_pci_driver = {
.name = "toshoboe",
.id_table = toshoboe_pci_tbl,
.probe = toshoboe_probe,
.remove = toshoboe_remove,
.suspend = toshoboe_suspend,
.resume = toshoboe_resume
};
int __init
toshoboe_init (void)
{
return pci_module_init(&toshoboe_pci_driver);
}
void
toshoboe_cleanup (void)
{
pci_unregister_driver(&toshoboe_pci_driver);
}
module_init(toshoboe_init);
module_exit(toshoboe_cleanup);
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7