Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED driver updates from Jacek Anaszewski:
 "Three new LED class drivers and some minor fixes and improvementes to
  the leds-gpio driver, LED Trigger core and documentation"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: triggers: Check return value of kobject_uevent_env()
  leds: triggers: Return from led_trigger_set() if there is nothing to do
  leds: gpio: fix and simplify error handling in gpio_leds_create
  leds: gpio: switch to managed version of led_classdev_register
  leds: gpio: fix and simplify reading property "label"
  leds: gpio: simplify gpio_leds_create
  leds: gpio: add helper cdev_to_gpio_led_data
  leds: gpio: fix an unhandled error case in create_gpio_led
  leds: gpio: introduce gpio_blink_set_t
  leds: add driver for Mellanox systems LEDs
  Documentation: move oneshot trigger attributes documentation to ABI
  leds: centralize definition of "default-state" property
  leds: add PM8058 LEDs driver
  leds: pm8058: add device tree bindings
  leds: do not overflow sysfs buffer in led_trigger_show
  leds: make triggers explicitly non-modular
  DT: leds: Add bindings for ISSI is31fl319x
  leds: is31fl319x: 1/3/6/9-channel light effect led driver

Documentation/ABI/testing/sysfs-class-led

@@ -24,7 +24,8 @@ Description:
 		of led events.
 		You can change triggers in a similar manner to the way an IO
 		scheduler is chosen. Trigger specific parameters can appear in
-		/sys/class/leds/<led> once a given trigger is selected.
+		/sys/class/leds/<led> once a given trigger is selected. For
+		their documentation see sysfs-class-led-trigger-*.
 
 What:		/sys/class/leds/<led>/inverted
 Date:		January 2011

Documentation/ABI/testing/sysfs-class-led-trigger-oneshot

+What:		/sys/class/leds/<led>/delay_on
+Date:		Jun 2012
+KernelVersion:	3.6
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Specifies for how many milliseconds the LED has to stay at
+		LED_FULL brightness after it has been armed.
+		Defaults to 100 ms.
+
+What:		/sys/class/leds/<led>/delay_off
+Date:		Jun 2012
+KernelVersion:	3.6
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Specifies for how many milliseconds the LED has to stay at
+		LED_OFF brightness after it has been armed.
+		Defaults to 100 ms.
+
+What:		/sys/class/leds/<led>/invert
+Date:		Jun 2012
+KernelVersion:	3.6
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Reverse the blink logic. If set to 0 (default) blink on for
+		delay_on ms, then blink off for delay_off ms, leaving the LED
+		normally off. If set to 1, blink off for delay_off ms, then
+		blink on for delay_on ms, leaving the LED normally on.
+		Setting this value also immediately changes the LED state.
+
+What:		/sys/class/leds/<led>/shot
+Date:		Jun 2012
+KernelVersion:	3.6
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Write any non-empty string to signal an events, this starts a
+		blink sequence if not already running.

Documentation/devicetree/bindings/leds/common.txt

@@ -19,6 +19,13 @@ Optional properties for child nodes:
 	  a device, i.e. no other LED class device can be assigned the same
 	  label.
 
+- default-state : The initial state of the LED. Valid values are "on", "off",
+  and "keep". If the LED is already on or off and the default-state property is
+  set the to same value, then no glitch should be produced where the LED
+  momentarily turns off (or on). The "keep" setting will keep the LED at
+  whatever its current state is, without producing a glitch.  The default is
+  off if this property is not present.
+
 - linux,default-trigger :  This parameter, if present, is a
     string defining the trigger assigned to the LED.  Current triggers are:
      "backlight" - LED will act as a back-light, controlled by the framebuffer

Documentation/devicetree/bindings/leds/leds-bcm6328.txt

@@ -49,7 +49,7 @@ LED sub-node optional properties:
     - active-low : Boolean, makes LED active low.
       Default : false
     - default-state : see
-      Documentation/devicetree/bindings/leds/leds-gpio.txt
+      Documentation/devicetree/bindings/leds/common.txt
     - linux,default-trigger : see
       Documentation/devicetree/bindings/leds/common.txt
 

Documentation/devicetree/bindings/leds/leds-bcm6358.txt

@@ -28,7 +28,7 @@ LED sub-node optional properties:
   - active-low : Boolean, makes LED active low.
     Default : false
   - default-state : see
-    Documentation/devicetree/bindings/leds/leds-gpio.txt
+    Documentation/devicetree/bindings/leds/common.txt
   - linux,default-trigger : see
     Documentation/devicetree/bindings/leds/common.txt
 

Documentation/devicetree/bindings/leds/leds-gpio.txt

@@ -14,13 +14,8 @@ LED sub-node properties:
   see Documentation/devicetree/bindings/leds/common.txt
 - linux,default-trigger :  (optional)
   see Documentation/devicetree/bindings/leds/common.txt
-- default-state:  (optional) The initial state of the LED.  Valid
-  values are "on", "off", and "keep".  If the LED is already on or off
-  and the default-state property is set the to same value, then no
-  glitch should be produced where the LED momentarily turns off (or
-  on).  The "keep" setting will keep the LED at whatever its current
-  state is, without producing a glitch.  The default is off if this
-  property is not present.
+- default-state:  (optional) The initial state of the LED.
+  see Documentation/devicetree/bindings/leds/common.txt
 - retain-state-suspended: (optional) The suspend state can be retained.Such
   as charge-led gpio.
 - panic-indicator : (optional)

Documentation/devicetree/bindings/leds/leds-is31fl319x.txt

+LEDs connected to is31fl319x LED controller chip
+
+Required properties:
+- compatible : Should be any of
+	"issi,is31fl3190"
+	"issi,is31fl3191"
+	"issi,is31fl3193"
+	"issi,is31fl3196"
+	"issi,is31fl3199"
+	"si-en,sn3199".
+- #address-cells: Must be 1.
+- #size-cells: Must be 0.
+- reg: 0x64, 0x65, 0x66, or 0x67.
+
+Optional properties:
+- audio-gain-db : audio gain selection for external analog modulation input.
+	Valid values: 0 - 21, step by 3 (rounded down)
+	Default: 0
+
+Each led is represented as a sub-node of the issi,is31fl319x device.
+There can be less leds subnodes than the chip can support but not more.
+
+Required led sub-node properties:
+- reg : number of LED line
+	Valid values: 1 - number of leds supported by the chip variant.
+
+Optional led sub-node properties:
+- label : see Documentation/devicetree/bindings/leds/common.txt.
+- linux,default-trigger :
+	see Documentation/devicetree/bindings/leds/common.txt.
+- led-max-microamp : (optional)
+	Valid values: 5000 - 40000, step by 5000 (rounded down)
+	Default: 20000 (20 mA)
+	Note: a driver will take the lowest of all led limits since the
+	chip has a single global setting. The lowest value will be chosen
+	due to the PWM specificity, where lower brightness is achieved
+	by reducing the dury-cycle of pulses and not the current, which
+	will always have its peak value equal to led-max-microamp.
+
+Examples:
+
+fancy_leds: leds@65 {
+	compatible = "issi,is31fl3196";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x65>;
+
+	red_aux: led@1 {
+		label = "red:aux";
+		reg = <1>;
+		led-max-microamp = <10000>;
+	};
+
+	green_power: led@5 {
+		label = "green:power";
+		reg = <5>;
+		linux,default-trigger = "default-on";
+	};
+};

Documentation/devicetree/bindings/leds/leds-pm8058.txt

+Qualcomm PM8058 LED driver
+
+The Qualcomm PM8058 is a multi-functional device which contains
+an LED driver block for up to six LEDs: three normal LEDs, two
+"flash" LEDs and one "keypad backlight" LED. The names are
+quoted because sometimes these LED drivers are used for wildly
+different things than flash or keypad backlight: their names
+are more of a suggestion than a hard-wired usecase.
+
+Hardware-wise the different LEDs support slightly different
+output currents. The "flash" LEDs do not need to charge nor
+do they support external triggers. They are just powerful LED
+drivers.
+
+The LEDs appear as children to the PM8058 device, with the
+proper compatible string. For the PM8058 bindings see:
+mfd/qcom-pm8xxx.txt.
+
+Each LED is represented as a sub-node of the syscon device. Each
+node's name represents the name of the corresponding LED.
+
+LED sub-node properties:
+
+Required properties:
+- compatible: one of
+  "qcom,pm8058-led" (for the normal LEDs at 0x131, 0x132 and 0x133)
+  "qcom,pm8058-keypad-led" (for the "keypad" LED at 0x48)
+  "qcom,pm8058-flash-led" (for the "flash" LEDs at 0x49 and 0xFB)
+
+Optional properties:
+- label: see Documentation/devicetree/bindings/leds/common.txt
+- default-state: see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+qcom,ssbi@500000 {
+	pmicintc: pmic@0 {
+		compatible = "qcom,pm8058";
+		led@48 {
+			compatible = "qcom,pm8058-keypad-led";
+			reg = <0x48>;
+			label = "pm8050:white:keypad";
+			default-state = "off";
+		};
+		led@131 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x131>;
+			label = "pm8058:red";
+			default-state = "off";
+		};
+		led@132 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x132>;
+			label = "pm8058:yellow";
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+		led@133 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x133>;
+			label = "pm8058:green";
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};

Documentation/devicetree/bindings/leds/register-bit-led.txt

@@ -23,13 +23,8 @@ Optional properties:
   see Documentation/devicetree/bindings/leds/common.txt
 - linux,default-trigger : (optional)
   see Documentation/devicetree/bindings/leds/common.txt
-- default-state: (optional) The initial state of the LED. Valid
-  values are "on", "off", and "keep". If the LED is already on or off
-  and the default-state property is set the to same value, then no
-  glitch should be produced where the LED momentarily turns off (or
-  on). The "keep" setting will keep the LED at whatever its current
-  state is, without producing a glitch.  The default is off if this
-  property is not present.
+- default-state: (optional) The initial state of the LED
+  see Documentation/devicetree/bindings/leds/common.txt
 
 Example:
 

Documentation/leds/leds-mlxcpld.txt

+Kernel driver for Mellanox systems LEDs
+=======================================
+
+Provide system LED support for the nex Mellanox systems:
+"msx6710", "msx6720", "msb7700", "msn2700", "msx1410",
+"msn2410", "msb7800", "msn2740", "msn2100".
+
+Description
+-----------
+Driver provides the following LEDs for the systems "msx6710", "msx6720",
+"msb7700", "msn2700", "msx1410", "msn2410", "msb7800", "msn2740":
+  mlxcpld:fan1:green
+  mlxcpld:fan1:red
+  mlxcpld:fan2:green
+  mlxcpld:fan2:red
+  mlxcpld:fan3:green
+  mlxcpld:fan3:red
+  mlxcpld:fan4:green
+  mlxcpld:fan4:red
+  mlxcpld:psu:green
+  mlxcpld:psu:red
+  mlxcpld:status:green
+  mlxcpld:status:red
+
+ "status"
+  CPLD reg offset: 0x20
+  Bits [3:0]
+
+ "psu"
+  CPLD reg offset: 0x20
+  Bits [7:4]
+
+ "fan1"
+  CPLD reg offset: 0x21
+  Bits [3:0]
+
+ "fan2"
+  CPLD reg offset: 0x21
+  Bits [7:4]
+
+ "fan3"
+  CPLD reg offset: 0x22
+  Bits [3:0]
+
+ "fan4"
+  CPLD reg offset: 0x22
+  Bits [7:4]
+
+ Color mask for all the above LEDs:
+  [bit3,bit2,bit1,bit0] or
+  [bit7,bit6,bit5,bit4]:
+	[0,0,0,0] = LED OFF
+	[0,1,0,1] = Red static ON
+	[1,1,0,1] = Green static ON
+	[0,1,1,0] = Red blink 3Hz
+	[1,1,1,0] = Green blink 3Hz
+	[0,1,1,1] = Red blink 6Hz
+	[1,1,1,1] = Green blink 6Hz
+
+Driver provides the following LEDs for the system "msn2100":
+  mlxcpld:fan:green
+  mlxcpld:fan:red
+  mlxcpld:psu1:green
+  mlxcpld:psu1:red
+  mlxcpld:psu2:green
+  mlxcpld:psu2:red
+  mlxcpld:status:green
+  mlxcpld:status:red
+  mlxcpld:uid:blue
+
+ "status"
+  CPLD reg offset: 0x20
+  Bits [3:0]
+
+ "fan"
+  CPLD reg offset: 0x21
+  Bits [3:0]
+
+ "psu1"
+  CPLD reg offset: 0x23
+  Bits [3:0]
+
+ "psu2"
+  CPLD reg offset: 0x23
+  Bits [7:4]
+
+ "uid"
+  CPLD reg offset: 0x24
+  Bits [3:0]
+
+ Color mask for all the above LEDs, excepted uid:
+  [bit3,bit2,bit1,bit0] or
+  [bit7,bit6,bit5,bit4]:
+	[0,0,0,0] = LED OFF
+	[0,1,0,1] = Red static ON
+	[1,1,0,1] = Green static ON
+	[0,1,1,0] = Red blink 3Hz
+	[1,1,1,0] = Green blink 3Hz
+	[0,1,1,1] = Red blink 6Hz
+	[1,1,1,1] = Green blink 6Hz
+
+ Color mask for uid LED:
+  [bit3,bit2,bit1,bit0]:
+	[0,0,0,0] = LED OFF
+	[1,1,0,1] = Blue static ON
+	[1,1,1,0] = Blue blink 3Hz
+	[1,1,1,1] = Blue blink 6Hz
+
+Driver supports HW blinking at 3Hz and 6Hz frequency (50% duty cycle).
+For 3Hz duty cylce is about 167 msec, for 6Hz is about 83 msec.

Documentation/leds/ledtrig-oneshot.txt

@@ -21,24 +21,8 @@ below:
 
   echo oneshot > trigger
 
-This adds the following sysfs attributes to the LED:
-
-  delay_on - specifies for how many milliseconds the LED has to stay at
-             LED_FULL brightness after it has been armed.
-             Default to 100 ms.
-
-  delay_off - specifies for how many milliseconds the LED has to stay at
-              LED_OFF brightness after it has been armed.
-              Default to 100 ms.
-
-  invert - reverse the blink logic.  If set to 0 (default) blink on for delay_on
-           ms, then blink off for delay_off ms, leaving the LED normally off.  If
-           set to 1, blink off for delay_off ms, then blink on for delay_on ms,
-           leaving the LED normally on.
-           Setting this value also immediately change the LED state.
-
-  shot - write any non-empty string to signal an events, this starts a blink
-         sequence if not already running.
+This adds sysfs attributes to the LED that are documented in:
+Documentation/ABI/testing/sysfs-class-led-trigger-oneshot
 
 Example use-case: network devices, initialization:
 

MAINTAINERS

@@ -7678,6 +7678,13 @@ W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 F:	drivers/net/ethernet/mellanox/mlxsw/
 
+MELLANOX MLXCPLD LED DRIVER
+M:	Vadim Pasternak <vadimp@mellanox.com>
+L:	linux-leds@vger.kernel.org
+S:	Supported
+F:	drivers/leds/leds-mlxcpld.c
+F:	Documentation/leds/leds-mlxcpld.txt
+
 MELLANOX PLATFORM DRIVER
 M:      Vadim Pasternak <vadimp@mellanox.com>
 L:      platform-driver-x86@vger.kernel.org

drivers/leds/Kconfig

@@ -584,6 +584,18 @@ config LEDS_SEAD3
 	  This driver can also be built as a module. If so the module
 	  will be called leds-sead3.
 
+config LEDS_IS31FL319X
+	tristate "LED Support for ISSI IS31FL319x I2C LED controller family"
+	depends on LEDS_CLASS && I2C && OF
+	select REGMAP_I2C
+	help
+	  This option enables support for LEDs connected to ISSI IS31FL319x
+	  fancy LED driver chips accessed via the I2C bus.
+	  Driver supports individual PWM brightness control for each channel.
+
+	  This driver can also be built as a module. If so the module will be
+	  called leds-is31fl319x.
+
 config LEDS_IS31FL32XX
 	tristate "LED support for ISSI IS31FL32XX I2C LED controller family"
 	depends on LEDS_CLASS && I2C && OF
@@ -631,6 +643,22 @@ config LEDS_VERSATILE
 	  This option enabled support for the LEDs on the ARM Versatile
 	  and RealView boards. Say Y to enabled these.
 
+config LEDS_PM8058
+	tristate "LED Support for the Qualcomm PM8058 PMIC"
+	depends on MFD_PM8921_CORE
+	depends on LEDS_CLASS
+	help
+	  Choose this option if you want to use the LED drivers in
+	  the Qualcomm PM8058 PMIC.
+
+config LEDS_MLXCPLD
+	tristate "LED support for the Mellanox boards"
+	depends on X86_64 && DMI
+	depends on LEDS_CLASS
+	help
+	  This option enabled support for the LEDs on the Mellanox
+	  boards. Say Y to enabled these.
+
 comment "LED Triggers"
 source "drivers/leds/trigger/Kconfig"
 

drivers/leds/Makefile

@@ -67,7 +67,10 @@ obj-$(CONFIG_LEDS_MENF21BMC)		+= leds-menf21bmc.o
 obj-$(CONFIG_LEDS_KTD2692)		+= leds-ktd2692.o
 obj-$(CONFIG_LEDS_POWERNV)		+= leds-powernv.o
 obj-$(CONFIG_LEDS_SEAD3)		+= leds-sead3.o
+obj-$(CONFIG_LEDS_IS31FL319X)		+= leds-is31fl319x.o
 obj-$(CONFIG_LEDS_IS31FL32XX)		+= leds-is31fl32xx.o
+obj-$(CONFIG_LEDS_PM8058)		+= leds-pm8058.o
+obj-$(CONFIG_LEDS_MLXCPLD)		+= leds-mlxcpld.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o

drivers/leds/led-triggers.c

@@ -11,7 +11,7 @@
  *
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
@@ -81,21 +81,23 @@ ssize_t led_trigger_show(struct device *dev, struct device_attribute *attr,
 	down_read(&led_cdev->trigger_lock);
 
 	if (!led_cdev->trigger)
-		len += sprintf(buf+len, "[none] ");
+		len += scnprintf(buf+len, PAGE_SIZE - len, "[none] ");
 	else
-		len += sprintf(buf+len, "none ");
+		len += scnprintf(buf+len, PAGE_SIZE - len, "none ");
 
 	list_for_each_entry(trig, &trigger_list, next_trig) {
 		if (led_cdev->trigger && !strcmp(led_cdev->trigger->name,
 							trig->name))
-			len += sprintf(buf+len, "[%s] ", trig->name);
+			len += scnprintf(buf+len, PAGE_SIZE - len, "[%s] ",
+					 trig->name);
 		else
-			len += sprintf(buf+len, "%s ", trig->name);
+			len += scnprintf(buf+len, PAGE_SIZE - len, "%s ",
+					 trig->name);
 	}
 	up_read(&led_cdev->trigger_lock);
 	up_read(&triggers_list_lock);
 
-	len += sprintf(len+buf, "\n");
+	len += scnprintf(len+buf, PAGE_SIZE - len, "\n");
 	return len;
 }
 EXPORT_SYMBOL_GPL(led_trigger_show);
@@ -108,6 +110,9 @@ void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
 	char *envp[2];
 	const char *name;
 
+	if (!led_cdev->trigger && !trig)
+		return;
+
 	name = trig ? trig->name : "none";
 	event = kasprintf(GFP_KERNEL, "TRIGGER=%s", name);
 
@@ -136,7 +141,9 @@ void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
 	if (event) {
 		envp[0] = event;
 		envp[1] = NULL;
-		kobject_uevent_env(&led_cdev->dev->kobj, KOBJ_CHANGE, envp);
+		if (kobject_uevent_env(&led_cdev->dev->kobj, KOBJ_CHANGE, envp))
+			dev_err(led_cdev->dev,
+				"%s: Error sending uevent\n", __func__);
 		kfree(event);
 	}
 }
@@ -357,7 +364,3 @@ void led_trigger_unregister_simple(struct led_trigger *trig)
 	kfree(trig);
 }
 EXPORT_SYMBOL_GPL(led_trigger_unregister_simple);
-
-MODULE_AUTHOR("Richard Purdie");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("LED Triggers Core");

drivers/leds/leds-gpio.c

@@ -26,15 +26,19 @@ struct gpio_led_data {
 	struct gpio_desc *gpiod;
 	u8 can_sleep;
 	u8 blinking;
-	int (*platform_gpio_blink_set)(struct gpio_desc *desc, int state,
-			unsigned long *delay_on, unsigned long *delay_off);
+	gpio_blink_set_t platform_gpio_blink_set;
 };
 
+static inline struct gpio_led_data *
+			cdev_to_gpio_led_data(struct led_classdev *led_cdev)
+{
+	return container_of(led_cdev, struct gpio_led_data, cdev);
+}
+
 static void gpio_led_set(struct led_classdev *led_cdev,
 	enum led_brightness value)
 {
-	struct gpio_led_data *led_dat =
-		container_of(led_cdev, struct gpio_led_data, cdev);
+	struct gpio_led_data *led_dat = cdev_to_gpio_led_data(led_cdev);
 	int level;
 
 	if (value == LED_OFF)
@@ -64,8 +68,7 @@ static int gpio_led_set_blocking(struct led_classdev *led_cdev,
 static int gpio_blink_set(struct led_classdev *led_cdev,
 	unsigned long *delay_on, unsigned long *delay_off)
 {
-	struct gpio_led_data *led_dat =
-		container_of(led_cdev, struct gpio_led_data, cdev);
+	struct gpio_led_data *led_dat = cdev_to_gpio_led_data(led_cdev);
 
 	led_dat->blinking = 1;
 	return led_dat->platform_gpio_blink_set(led_dat->gpiod, GPIO_LED_BLINK,
@@ -74,8 +77,7 @@ static int gpio_blink_set(struct led_classdev *led_cdev,
 
 static int create_gpio_led(const struct gpio_led *template,
 	struct gpio_led_data *led_dat, struct device *parent,
-	int (*blink_set)(struct gpio_desc *, int, unsigned long *,
-			 unsigned long *))
+	gpio_blink_set_t blink_set)
 {
 	int ret, state;
 
@@ -120,10 +122,13 @@ static int create_gpio_led(const struct gpio_led *template,
 		led_dat->platform_gpio_blink_set = blink_set;
 		led_dat->cdev.blink_set = gpio_blink_set;
 	}
-	if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP)
-		state = !!gpiod_get_value_cansleep(led_dat->gpiod);
-	else
+	if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP) {
+		state = gpiod_get_value_cansleep(led_dat->gpiod);
+		if (state < 0)
+			return state;
+	} else {
 		state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
+	}
 	led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
 	if (!template->retain_state_suspended)
 		led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
@@ -134,7 +139,7 @@ static int create_gpio_led(const struct gpio_led *template,
 	if (ret < 0)
 		return ret;
 
-	return led_classdev_register(parent, &led_dat->cdev);
+	return devm_led_classdev_register(parent, &led_dat->cdev);
 }
 
 struct gpio_leds_priv {
@@ -154,7 +159,6 @@ static struct gpio_leds_priv *gpio_leds_create(struct platform_device *pdev)
 	struct fwnode_handle *child;
 	struct gpio_leds_priv *priv;
 	int count, ret;
-	struct device_node *np;
 
 	count = device_get_child_node_count(dev);
 	if (!count)
@@ -168,26 +172,22 @@ static struct gpio_leds_priv *gpio_leds_create(struct platform_device *pdev)
 		struct gpio_led_data *led_dat = &priv->leds[priv->num_leds];
 		struct gpio_led led = {};
 		const char *state = NULL;
+		struct device_node *np = to_of_node(child);
 
 		led.gpiod = devm_get_gpiod_from_child(dev, NULL, child);
 		if (IS_ERR(led.gpiod)) {
 			fwnode_handle_put(child);
-			ret = PTR_ERR(led.gpiod);
-			goto err;
+			return ERR_CAST(led.gpiod);
 		}
 
-		np = to_of_node(child);
-
-		if (fwnode_property_present(child, "label")) {
-			fwnode_property_read_string(child, "label", &led.name);
-		} else {
-			if (IS_ENABLED(CONFIG_OF) && !led.name && np)
+		ret = fwnode_property_read_string(child, "label", &led.name);
+		if (ret && IS_ENABLED(CONFIG_OF) && np)
 			led.name = np->name;
 		if (!led.name) {
-				ret = -EINVAL;
-				goto err;
-			}
+			fwnode_handle_put(child);
+			return ERR_PTR(-EINVAL);
 		}
+
 		fwnode_property_read_string(child, "linux,default-trigger",
 					    &led.default_trigger);
 
@@ -209,18 +209,13 @@ static struct gpio_leds_priv *gpio_leds_create(struct platform_device *pdev)
 		ret = create_gpio_led(&led, led_dat, dev, NULL);
 		if (ret < 0) {
 			fwnode_handle_put(child);
-			goto err;
+			return ERR_PTR(ret);
 		}
 		led_dat->cdev.dev->of_node = np;
 		priv->num_leds++;
 	}
 
 	return priv;
-
-err:
-	for (count = priv->num_leds - 1; count >= 0; count--)
-		led_classdev_unregister(&priv->leds[count].cdev);
-	return ERR_PTR(ret);
 }
 
 static const struct of_device_id of_gpio_leds_match[] = {
@@ -248,14 +243,9 @@ static int gpio_led_probe(struct platform_device *pdev)
 			ret = create_gpio_led(&pdata->leds[i],
 					      &priv->leds[i],
 					      &pdev->dev, pdata->gpio_blink_set);
-			if (ret < 0) {
-				/* On failure: unwind the led creations */
-				for (i = i - 1; i >= 0; i--)
-					led_classdev_unregister(
-							&priv->leds[i].cdev);
+			if (ret < 0)
 				return ret;
 		}
-		}
 	} else {
 		priv = gpio_leds_create(pdev);
 		if (IS_ERR(priv))
@@ -267,17 +257,6 @@ static int gpio_led_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int gpio_led_remove(struct platform_device *pdev)
-{
-	struct gpio_leds_priv *priv = platform_get_drvdata(pdev);
-	int i;
-
-	for (i = 0; i < priv->num_leds; i++)
-		led_classdev_unregister(&priv->leds[i].cdev);
-
-	return 0;
-}
-
 static void gpio_led_shutdown(struct platform_device *pdev)
 {
 	struct gpio_leds_priv *priv = platform_get_drvdata(pdev);
@@ -292,7 +271,6 @@ static void gpio_led_shutdown(struct platform_device *pdev)
 
 static struct platform_driver gpio_led_driver = {
 	.probe		= gpio_led_probe,
-	.remove		= gpio_led_remove,
 	.shutdown	= gpio_led_shutdown,
 	.driver		= {
 		.name	= "leds-gpio",

drivers/leds/leds-is31fl319x.c

+/*
+ * Copyright 2015-16 Golden Delicious Computers
+ *
+ * Author: Nikolaus Schaller <hns@goldelico.com>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * LED driver for the IS31FL319{0,1,3,6,9} to drive 1, 3, 6 or 9 light
+ * effect LEDs.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/* register numbers */
+#define IS31FL319X_SHUTDOWN		0x00
+#define IS31FL319X_CTRL1		0x01
+#define IS31FL319X_CTRL2		0x02
+#define IS31FL319X_CONFIG1		0x03
+#define IS31FL319X_CONFIG2		0x04
+#define IS31FL319X_RAMP_MODE		0x05
+#define IS31FL319X_BREATH_MASK		0x06
+#define IS31FL319X_PWM(channel)		(0x07 + channel)
+#define IS31FL319X_DATA_UPDATE		0x10
+#define IS31FL319X_T0(channel)		(0x11 + channel)
+#define IS31FL319X_T123_1		0x1a
+#define IS31FL319X_T123_2		0x1b
+#define IS31FL319X_T123_3		0x1c
+#define IS31FL319X_T4(channel)		(0x1d + channel)
+#define IS31FL319X_TIME_UPDATE		0x26
+#define IS31FL319X_RESET		0xff
+
+#define IS31FL319X_REG_CNT		(IS31FL319X_RESET + 1)
+
+#define IS31FL319X_MAX_LEDS		9
+
+/* CS (Current Setting) in CONFIG2 register */
+#define IS31FL319X_CONFIG2_CS_SHIFT	4
+#define IS31FL319X_CONFIG2_CS_MASK	0x7
+#define IS31FL319X_CONFIG2_CS_STEP_REF	12
+
+#define IS31FL319X_CURRENT_MIN		((u32)5000)
+#define IS31FL319X_CURRENT_MAX		((u32)40000)
+#define IS31FL319X_CURRENT_STEP		((u32)5000)
+#define IS31FL319X_CURRENT_DEFAULT	((u32)20000)
+
+/* Audio gain in CONFIG2 register */
+#define IS31FL319X_AUDIO_GAIN_DB_MAX	((u32)21)
+#define IS31FL319X_AUDIO_GAIN_DB_STEP	((u32)3)
+
+/*
+ * regmap is used as a cache of chip's register space,
+ * to avoid reading back brightness values from chip,
+ * which is known to hang.
+ */
+struct is31fl319x_chip {
+	const struct is31fl319x_chipdef *cdef;
+	struct i2c_client               *client;
+	struct regmap                   *regmap;
+	struct mutex                    lock;
+	u32                             audio_gain_db;
+
+	struct is31fl319x_led {
+		struct is31fl319x_chip  *chip;
+		struct led_classdev     cdev;
+		u32                     max_microamp;
+		bool                    configured;
+	} leds[IS31FL319X_MAX_LEDS];
+};
+
+struct is31fl319x_chipdef {
+	int num_leds;
+};
+
+static const struct is31fl319x_chipdef is31fl3190_cdef = {
+	.num_leds = 1,
+};
+
+static const struct is31fl319x_chipdef is31fl3193_cdef = {
+	.num_leds = 3,
+};
+
+static const struct is31fl319x_chipdef is31fl3196_cdef = {
+	.num_leds = 6,
+};
+
+static const struct is31fl319x_chipdef is31fl3199_cdef = {
+	.num_leds = 9,
+};
+
+static const struct of_device_id of_is31fl319x_match[] = {
+	{ .compatible = "issi,is31fl3190", .data = &is31fl3190_cdef, },
+	{ .compatible = "issi,is31fl3191", .data = &is31fl3190_cdef, },
+	{ .compatible = "issi,is31fl3193", .data = &is31fl3193_cdef, },
+	{ .compatible = "issi,is31fl3196", .data = &is31fl3196_cdef, },
+	{ .compatible = "issi,is31fl3199", .data = &is31fl3199_cdef, },
+	{ .compatible = "si-en,sn3199",    .data = &is31fl3199_cdef, },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, of_is31fl319x_match);
+
+static int is31fl319x_brightness_set(struct led_classdev *cdev,
+				     enum led_brightness brightness)
+{
+	struct is31fl319x_led *led = container_of(cdev, struct is31fl319x_led,
+						  cdev);
+	struct is31fl319x_chip *is31 = led->chip;
+	int chan = led - is31->leds;
+	int ret;
+	int i;
+	u8 ctrl1 = 0, ctrl2 = 0;
+
+	dev_dbg(&is31->client->dev, "%s %d: %d\n", __func__, chan, brightness);
+
+	mutex_lock(&is31->lock);
+
+	/* update PWM register */
+	ret = regmap_write(is31->regmap, IS31FL319X_PWM(chan), brightness);
+	if (ret < 0)
+		goto out;
+
+	/* read current brightness of all PWM channels */
+	for (i = 0; i < is31->cdef->num_leds; i++) {
+		unsigned int pwm_value;
+		bool on;
+
+		/*
+		 * since neither cdev nor the chip can provide
+		 * the current setting, we read from the regmap cache
+		 */
+
+		ret = regmap_read(is31->regmap, IS31FL319X_PWM(i), &pwm_value);
+		dev_dbg(&is31->client->dev, "%s read %d: ret=%d: %d\n",
+			__func__, i, ret, pwm_value);
+		on = ret >= 0 && pwm_value > LED_OFF;
+
+		if (i < 3)
+			ctrl1 |= on << i;       /* 0..2 => bit 0..2 */
+		else if (i < 6)
+			ctrl1 |= on << (i + 1); /* 3..5 => bit 4..6 */
+		else
+			ctrl2 |= on << (i - 6); /* 6..8 => bit 0..2 */
+	}
+
+	if (ctrl1 > 0 || ctrl2 > 0) {
+		dev_dbg(&is31->client->dev, "power up %02x %02x\n",
+			ctrl1, ctrl2);
+		regmap_write(is31->regmap, IS31FL319X_CTRL1, ctrl1);
+		regmap_write(is31->regmap, IS31FL319X_CTRL2, ctrl2);
+		/* update PWMs */
+		regmap_write(is31->regmap, IS31FL319X_DATA_UPDATE, 0x00);
+		/* enable chip from shut down */
+		ret = regmap_write(is31->regmap, IS31FL319X_SHUTDOWN, 0x01);
+	} else {
+		dev_dbg(&is31->client->dev, "power down\n");
+		/* shut down (no need to clear CTRL1/2) */
+		ret = regmap_write(is31->regmap, IS31FL319X_SHUTDOWN, 0x00);
+	}
+
+out:
+	mutex_unlock(&is31->lock);
+
+	return ret;
+}
+
+static int is31fl319x_parse_child_dt(const struct device *dev,
+				     const struct device_node *child,
+				     struct is31fl319x_led *led)
+{
+	struct led_classdev *cdev = &led->cdev;
+	int ret;
+
+	if (of_property_read_string(child, "label", &cdev->name))
+		cdev->name = child->name;
+
+	ret = of_property_read_string(child, "linux,default-trigger",
+				      &cdev->default_trigger);
+	if (ret < 0 && ret != -EINVAL) /* is optional */
+		return ret;
+
+	led->max_microamp = IS31FL319X_CURRENT_DEFAULT;
+	ret = of_property_read_u32(child, "led-max-microamp",
+				   &led->max_microamp);
+	if (!ret) {
+		if (led->max_microamp < IS31FL319X_CURRENT_MIN)
+			return -EINVAL;	/* not supported */
+		led->max_microamp = min(led->max_microamp,
+					  IS31FL319X_CURRENT_MAX);
+	}
+
+	return 0;
+}
+
+static int is31fl319x_parse_dt(struct device *dev,
+			       struct is31fl319x_chip *is31)
+{
+	struct device_node *np = dev->of_node, *child;
+	const struct of_device_id *of_dev_id;
+	int count;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	of_dev_id = of_match_device(of_is31fl319x_match, dev);
+	if (!of_dev_id) {
+		dev_err(dev, "Failed to match device with supported chips\n");
+		return -EINVAL;
+	}
+
+	is31->cdef = of_dev_id->data;
+
+	count = of_get_child_count(np);
+
+	dev_dbg(dev, "probe %s with %d leds defined in DT\n",
+		of_dev_id->compatible, count);
+
+	if (!count || count > is31->cdef->num_leds) {
+		dev_err(dev, "Number of leds defined must be between 1 and %u\n",
+			is31->cdef->num_leds);
+		return -ENODEV;
+	}
+
+	for_each_child_of_node(np, child) {
+		struct is31fl319x_led *led;
+		u32 reg;
+
+		ret = of_property_read_u32(child, "reg", &reg);
+		if (ret) {
+			dev_err(dev, "Failed to read led 'reg' property\n");
+			goto put_child_node;
+		}
+
+		if (reg < 1 || reg > is31->cdef->num_leds) {
+			dev_err(dev, "invalid led reg %u\n", reg);
+			ret = -EINVAL;
+			goto put_child_node;
+		}
+
+		led = &is31->leds[reg - 1];
+
+		if (led->configured) {
+			dev_err(dev, "led %u is already configured\n", reg);
+			ret = -EINVAL;
+			goto put_child_node;
+		}
+
+		ret = is31fl319x_parse_child_dt(dev, child, led);
+		if (ret) {
+			dev_err(dev, "led %u DT parsing failed\n", reg);
+			goto put_child_node;
+		}
+
+		led->configured = true;
+	}
+
+	is31->audio_gain_db = 0;
+	ret = of_property_read_u32(np, "audio-gain-db", &is31->audio_gain_db);
+	if (!ret)
+		is31->audio_gain_db = min(is31->audio_gain_db,
+					  IS31FL319X_AUDIO_GAIN_DB_MAX);
+
+	return 0;
+
+put_child_node:
+	of_node_put(child);
+	return ret;
+}
+
+static bool is31fl319x_readable_reg(struct device *dev, unsigned int reg)
+{ /* we have no readable registers */
+	return false;
+}
+
+static bool is31fl319x_volatile_reg(struct device *dev, unsigned int reg)
+{ /* volatile registers are not cached */
+	switch (reg) {
+	case IS31FL319X_DATA_UPDATE:
+	case IS31FL319X_TIME_UPDATE:
+	case IS31FL319X_RESET:
+		return true; /* always write-through */
+	default:
+		return false;
+	}
+}
+
+static const struct reg_default is31fl319x_reg_defaults[] = {
+	{ IS31FL319X_CONFIG1, 0x00},
+	{ IS31FL319X_CONFIG2, 0x00},
+	{ IS31FL319X_PWM(0), 0x00},
+	{ IS31FL319X_PWM(1), 0x00},
+	{ IS31FL319X_PWM(2), 0x00},
+	{ IS31FL319X_PWM(3), 0x00},
+	{ IS31FL319X_PWM(4), 0x00},
+	{ IS31FL319X_PWM(5), 0x00},
+	{ IS31FL319X_PWM(6), 0x00},
+	{ IS31FL319X_PWM(7), 0x00},
+	{ IS31FL319X_PWM(8), 0x00},
+};
+
+static struct regmap_config regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = IS31FL319X_REG_CNT,
+	.cache_type = REGCACHE_FLAT,
+	.readable_reg = is31fl319x_readable_reg,
+	.volatile_reg = is31fl319x_volatile_reg,
+	.reg_defaults = is31fl319x_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(is31fl319x_reg_defaults),
+};
+
+static inline int is31fl319x_microamp_to_cs(struct device *dev, u32 microamp)
+{ /* round down to nearest supported value (range check done by caller) */
+	u32 step = microamp / IS31FL319X_CURRENT_STEP;
+
+	return ((IS31FL319X_CONFIG2_CS_STEP_REF - step) &
+		IS31FL319X_CONFIG2_CS_MASK) <<
+		IS31FL319X_CONFIG2_CS_SHIFT; /* CS encoding */
+}
+
+static inline int is31fl319x_db_to_gain(u32 dezibel)
+{ /* round down to nearest supported value (range check done by caller) */
+	return dezibel / IS31FL319X_AUDIO_GAIN_DB_STEP;
+}
+
+static int is31fl319x_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	struct is31fl319x_chip *is31;
+	struct device *dev = &client->dev;
+	struct i2c_adapter *adapter = to_i2c_adapter(dev->parent);
+	int err;
+	int i = 0;
+	u32 aggregated_led_microamp = IS31FL319X_CURRENT_MAX;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
+		return -EIO;
+
+	is31 = devm_kzalloc(&client->dev, sizeof(*is31), GFP_KERNEL);
+	if (!is31)
+		return -ENOMEM;
+
+	mutex_init(&is31->lock);
+
+	err = is31fl319x_parse_dt(&client->dev, is31);
+	if (err)
+		goto free_mutex;
+
+	is31->client = client;
+	is31->regmap = devm_regmap_init_i2c(client, &regmap_config);
+	if (IS_ERR(is31->regmap)) {
+		dev_err(&client->dev, "failed to allocate register map\n");
+		err = PTR_ERR(is31->regmap);
+		goto free_mutex;
+	}
+
+	i2c_set_clientdata(client, is31);
+
+	/* check for write-reply from chip (we can't read any registers) */
+	err = regmap_write(is31->regmap, IS31FL319X_RESET, 0x00);
+	if (err < 0) {
+		dev_err(&client->dev, "no response from chip write: err = %d\n",
+			err);
+		err = -EIO; /* does not answer */
+		goto free_mutex;
+	}
+
+	/*
+	 * Kernel conventions require per-LED led-max-microamp property.
+	 * But the chip does not allow to limit individual LEDs.
+	 * So we take minimum from all subnodes for safety of hardware.
+	 */
+	for (i = 0; i < is31->cdef->num_leds; i++)
+		if (is31->leds[i].configured &&
+		    is31->leds[i].max_microamp < aggregated_led_microamp)
+			aggregated_led_microamp = is31->leds[i].max_microamp;
+
+	regmap_write(is31->regmap, IS31FL319X_CONFIG2,
+		     is31fl319x_microamp_to_cs(dev, aggregated_led_microamp) |
+		     is31fl319x_db_to_gain(is31->audio_gain_db));
+
+	for (i = 0; i < is31->cdef->num_leds; i++) {
+		struct is31fl319x_led *led = &is31->leds[i];
+
+		if (!led->configured)
+			continue;
+
+		led->chip = is31;
+		led->cdev.brightness_set_blocking = is31fl319x_brightness_set;
+
+		err = devm_led_classdev_register(&client->dev, &led->cdev);
+		if (err < 0)
+			goto free_mutex;
+	}
+
+	return 0;
+
+free_mutex:
+	mutex_destroy(&is31->lock);
+	return err;
+}
+
+static int is31fl319x_remove(struct i2c_client *client)
+{
+	struct is31fl319x_chip *is31 = i2c_get_clientdata(client);
+
+	mutex_destroy(&is31->lock);
+	return 0;
+}
+
+/*
+ * i2c-core (and modalias) requires that id_table be properly filled,
+ * even though it is not used for DeviceTree based instantiation.
+ */
+static const struct i2c_device_id is31fl319x_id[] = {
+	{ "is31fl3190" },
+	{ "is31fl3191" },
+	{ "is31fl3193" },
+	{ "is31fl3196" },
+	{ "is31fl3199" },
+	{ "sn3199" },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, is31fl319x_id);
+
+static struct i2c_driver is31fl319x_driver = {
+	.driver   = {
+		.name           = "leds-is31fl319x",
+		.of_match_table = of_match_ptr(of_is31fl319x_match),
+	},
+	.probe    = is31fl319x_probe,
+	.remove   = is31fl319x_remove,
+	.id_table = is31fl319x_id,
+};
+
+module_i2c_driver(is31fl319x_driver);
+
+MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
+MODULE_AUTHOR("Andrey Utkin <andrey_utkin@fastmail.com>");
+MODULE_DESCRIPTION("IS31FL319X LED driver");
+MODULE_LICENSE("GPL v2");

drivers/leds/leds-mlxcpld.c

+/*
+ * drivers/leds/leds-mlxcpld.c
+ * Copyright (c) 2016 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2016 Vadim Pasternak <vadimp@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/dmi.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define MLXPLAT_CPLD_LPC_REG_BASE_ADRR     0x2500 /* LPC bus access */
+
+/* Color codes for LEDs */
+#define MLXCPLD_LED_OFFSET_HALF		0x01 /* Offset from solid: 3Hz blink */
+#define MLXCPLD_LED_OFFSET_FULL		0x02 /* Offset from solid: 6Hz blink */
+#define MLXCPLD_LED_IS_OFF		0x00 /* Off */
+#define MLXCPLD_LED_RED_STATIC_ON	0x05 /* Solid red */
+#define MLXCPLD_LED_RED_BLINK_HALF	(MLXCPLD_LED_RED_STATIC_ON + \
+					 MLXCPLD_LED_OFFSET_HALF)
+#define MLXCPLD_LED_RED_BLINK_FULL	(MLXCPLD_LED_RED_STATIC_ON + \
+					 MLXCPLD_LED_OFFSET_FULL)
+#define MLXCPLD_LED_GREEN_STATIC_ON	0x0D /* Solid green */
+#define MLXCPLD_LED_GREEN_BLINK_HALF	(MLXCPLD_LED_GREEN_STATIC_ON + \
+					 MLXCPLD_LED_OFFSET_HALF)
+#define MLXCPLD_LED_GREEN_BLINK_FULL	(MLXCPLD_LED_GREEN_STATIC_ON + \
+					 MLXCPLD_LED_OFFSET_FULL)
+#define MLXCPLD_LED_BLINK_3HZ		167 /* ~167 msec off/on */
+#define MLXCPLD_LED_BLINK_6HZ		83 /* ~83 msec off/on */
+
+/**
+ * mlxcpld_param - LED access parameters:
+ * @offset - offset for LED access in CPLD device
+ * @mask - mask for LED access in CPLD device
+ * @base_color - base color code for LED
+**/
+struct mlxcpld_param {
+	u8 offset;
+	u8 mask;
+	u8 base_color;
+};
+
+/**
+ * mlxcpld_led_priv - LED private data:
+ * @cled - LED class device instance
+ * @param - LED CPLD access parameters
+**/
+struct mlxcpld_led_priv {
+	struct led_classdev cdev;
+	struct mlxcpld_param param;
+};
+
+#define cdev_to_priv(c)		container_of(c, struct mlxcpld_led_priv, cdev)
+
+/**
+ * mlxcpld_led_profile - system LED profile (defined per system class):
+ * @offset - offset for LED access in CPLD device
+ * @mask - mask for LED access in CPLD device
+ * @base_color - base color code
+ * @brightness - default brightness setting (on/off)
+ * @name - LED name
+**/
+struct mlxcpld_led_profile {
+	u8 offset;
+	u8 mask;
+	u8 base_color;
+	enum led_brightness brightness;
+	const char *name;
+};
+
+/**
+ * mlxcpld_led_pdata - system LED private data
+ * @pdev - platform device pointer
+ * @pled - LED class device instance
+ * @profile - system configuration profile
+ * @num_led_instances - number of LED instances
+ * @lock - device access lock
+**/
+struct mlxcpld_led_pdata {
+	struct platform_device *pdev;
+	struct mlxcpld_led_priv *pled;
+	struct mlxcpld_led_profile *profile;
+	int num_led_instances;
+	spinlock_t lock;
+};
+
+static struct mlxcpld_led_pdata *mlxcpld_led;
+
+/* Default profile fit the next Mellanox systems:
+ * "msx6710", "msx6720", "msb7700", "msn2700", "msx1410",
+ * "msn2410", "msb7800", "msn2740"
+ */
+static struct mlxcpld_led_profile mlxcpld_led_default_profile[] = {
+	{
+		0x21, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+		"mlxcpld:fan1:green",
+	},
+	{
+		0x21, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+		"mlxcpld:fan1:red",
+	},
+	{
+		0x21, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+		"mlxcpld:fan2:green",
+	},
+	{
+		0x21, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+		"mlxcpld:fan2:red",
+	},
+	{
+		0x22, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+		"mlxcpld:fan3:green",
+	},
+	{
+		0x22, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+		"mlxcpld:fan3:red",
+	},
+	{
+		0x22, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+		"mlxcpld:fan4:green",
+	},
+	{
+		0x22, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+		"mlxcpld:fan4:red",
+	},
+	{
+		0x20, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+		"mlxcpld:psu:green",
+	},
+	{
+		0x20, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+		"mlxcpld:psu:red",
+	},
+	{
+		0x20, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+		"mlxcpld:status:green",
+	},
+	{
+		0x20, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+		"mlxcpld:status:red",
+	},
+};
+
+/* Profile fit the Mellanox systems based on "msn2100" */
+static struct mlxcpld_led_profile mlxcpld_led_msn2100_profile[] = {
+	{
+		0x21, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+		"mlxcpld:fan:green",
+	},
+	{
+		0x21, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+		"mlxcpld:fan:red",
+	},
+	{
+		0x23, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+		"mlxcpld:psu1:green",
+	},
+	{
+		0x23, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+		"mlxcpld:psu1:red",
+	},
+	{
+		0x23, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+		"mlxcpld:psu2:green",
+	},
+	{
+		0x23, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+		"mlxcpld:psu2:red",
+	},
+	{
+		0x20, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+		"mlxcpld:status:green",
+	},
+	{
+		0x20, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+		"mlxcpld:status:red",
+	},
+	{
+		0x24, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, LED_OFF,
+		"mlxcpld:uid:blue",
+	},
+};
+
+enum mlxcpld_led_platform_types {
+	MLXCPLD_LED_PLATFORM_DEFAULT,
+	MLXCPLD_LED_PLATFORM_MSN2100,
+};
+
+static const char *mlx_product_names[] = {
+	"DEFAULT",
+	"MSN2100",
+};
+
+static enum
+mlxcpld_led_platform_types mlxcpld_led_platform_check_sys_type(void)
+{
+	const char *mlx_product_name;
+	int i;
+
+	mlx_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+	if (!mlx_product_name)
+		return MLXCPLD_LED_PLATFORM_DEFAULT;
+
+	for (i = 1;  i < ARRAY_SIZE(mlx_product_names); i++) {
+		if (strstr(mlx_product_name, mlx_product_names[i]))
+			return i;
+	}
+
+	return MLXCPLD_LED_PLATFORM_DEFAULT;
+}
+
+static void mlxcpld_led_bus_access_func(u16 base, u8 offset, u8 rw_flag,
+					u8 *data)
+{
+	u32 addr = base + offset;
+
+	if (rw_flag == 0)
+		outb(*data, addr);
+	else
+		*data = inb(addr);
+}
+
+static void mlxcpld_led_store_hw(u8 mask, u8 off, u8 vset)
+{
+	u8 nib, val;
+
+	/*
+	 * Each LED is controlled through low or high nibble of the relevant
+	 * CPLD register. Register offset is specified by off parameter.
+	 * Parameter vset provides color code: 0x0 for off, 0x5 for solid red,
+	 * 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink
+	 * green.
+	 * Parameter mask specifies which nibble is used for specific LED: mask
+	 * 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f -
+	 * higher nibble (bits from 4 to 7).
+	 */
+	spin_lock(&mlxcpld_led->lock);
+	mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR, off, 1,
+				    &val);
+	nib = (mask == 0xf0) ? vset : (vset << 4);
+	val = (val & mask) | nib;
+	mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR, off, 0,
+				    &val);
+	spin_unlock(&mlxcpld_led->lock);
+}
+
+static void mlxcpld_led_brightness_set(struct led_classdev *led,
+				       enum led_brightness value)
+{
+	struct mlxcpld_led_priv *pled = cdev_to_priv(led);
+
+	if (value) {
+		mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
+				     pled->param.base_color);
+		return;
+	}
+
+	mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
+			     MLXCPLD_LED_IS_OFF);
+}
+
+static int mlxcpld_led_blink_set(struct led_classdev *led,
+				 unsigned long *delay_on,
+				 unsigned long *delay_off)
+{
+	struct mlxcpld_led_priv *pled = cdev_to_priv(led);
+
+	/*
+	 * HW supports two types of blinking: full (6Hz) and half (3Hz).
+	 * For delay on/off zero default setting 3Hz is used.
+	 */
+	if (!(*delay_on == 0 && *delay_off == 0) &&
+	    !(*delay_on == MLXCPLD_LED_BLINK_3HZ &&
+	      *delay_off == MLXCPLD_LED_BLINK_3HZ) &&
+	    !(*delay_on == MLXCPLD_LED_BLINK_6HZ &&
+	      *delay_off == MLXCPLD_LED_BLINK_6HZ))
+		return -EINVAL;
+
+	if (*delay_on == MLXCPLD_LED_BLINK_6HZ)
+		mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
+				     pled->param.base_color +
+				     MLXCPLD_LED_OFFSET_FULL);
+	else
+		mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
+				     pled->param.base_color +
+				     MLXCPLD_LED_OFFSET_HALF);
+
+	return 0;
+}
+
+static int mlxcpld_led_config(struct device *dev,
+			      struct mlxcpld_led_pdata *cpld)
+{
+	int i;
+	int err;
+
+	cpld->pled = devm_kzalloc(dev, sizeof(struct mlxcpld_led_priv) *
+				  cpld->num_led_instances, GFP_KERNEL);
+	if (!cpld->pled)
+		return -ENOMEM;
+
+	for (i = 0; i < cpld->num_led_instances; i++) {
+		cpld->pled[i].cdev.name = cpld->profile[i].name;
+		cpld->pled[i].cdev.brightness = cpld->profile[i].brightness;
+		cpld->pled[i].cdev.max_brightness = 1;
+		cpld->pled[i].cdev.brightness_set = mlxcpld_led_brightness_set;
+		cpld->pled[i].cdev.blink_set = mlxcpld_led_blink_set;
+		cpld->pled[i].cdev.flags = LED_CORE_SUSPENDRESUME;
+		err = devm_led_classdev_register(dev, &cpld->pled[i].cdev);
+		if (err)
+			return err;
+
+		cpld->pled[i].param.offset = mlxcpld_led->profile[i].offset;
+		cpld->pled[i].param.mask = mlxcpld_led->profile[i].mask;
+		cpld->pled[i].param.base_color =
+					mlxcpld_led->profile[i].base_color;
+
+		if (mlxcpld_led->profile[i].brightness)
+			mlxcpld_led_brightness_set(&cpld->pled[i].cdev,
+					mlxcpld_led->profile[i].brightness);
+	}
+
+	return 0;
+}
+
+static int __init mlxcpld_led_probe(struct platform_device *pdev)
+{
+	enum mlxcpld_led_platform_types mlxcpld_led_plat =
+					mlxcpld_led_platform_check_sys_type();
+
+	mlxcpld_led = devm_kzalloc(&pdev->dev, sizeof(*mlxcpld_led),
+				   GFP_KERNEL);
+	if (!mlxcpld_led)
+		return -ENOMEM;
+
+	mlxcpld_led->pdev = pdev;
+
+	switch (mlxcpld_led_plat) {
+	case MLXCPLD_LED_PLATFORM_MSN2100:
+		mlxcpld_led->profile = mlxcpld_led_msn2100_profile;
+		mlxcpld_led->num_led_instances =
+				ARRAY_SIZE(mlxcpld_led_msn2100_profile);
+		break;
+
+	default:
+		mlxcpld_led->profile = mlxcpld_led_default_profile;
+		mlxcpld_led->num_led_instances =
+				ARRAY_SIZE(mlxcpld_led_default_profile);
+		break;
+	}
+
+	spin_lock_init(&mlxcpld_led->lock);
+
+	return mlxcpld_led_config(&pdev->dev, mlxcpld_led);
+}
+
+static struct platform_driver mlxcpld_led_driver = {
+	.driver = {
+		.name	= KBUILD_MODNAME,
+	},
+};
+
+static int __init mlxcpld_led_init(void)
+{
+	struct platform_device *pdev;
+	int err;
+
+	pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
+	if (IS_ERR(pdev)) {
+		pr_err("Device allocation failed\n");
+		return PTR_ERR(pdev);
+	}
+
+	err = platform_driver_probe(&mlxcpld_led_driver, mlxcpld_led_probe);
+	if (err) {
+		pr_err("Probe platform driver failed\n");
+		platform_device_unregister(pdev);
+	}
+
+	return err;
+}
+
+static void __exit mlxcpld_led_exit(void)
+{
+	platform_device_unregister(mlxcpld_led->pdev);
+	platform_driver_unregister(&mlxcpld_led_driver);
+}
+
+module_init(mlxcpld_led_init);
+module_exit(mlxcpld_led_exit);
+
+MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
+MODULE_DESCRIPTION("Mellanox board LED driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:leds_mlxcpld");

drivers/leds/leds-pm8058.c

+/* Copyright (c) 2010, 2011, 2016 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+
+#define PM8058_LED_TYPE_COMMON	0x00
+#define PM8058_LED_TYPE_KEYPAD	0x01
+#define PM8058_LED_TYPE_FLASH	0x02
+
+#define PM8058_LED_TYPE_COMMON_MASK	0xf8
+#define PM8058_LED_TYPE_KEYPAD_MASK	0xf0
+#define PM8058_LED_TYPE_COMMON_SHIFT	3
+#define PM8058_LED_TYPE_KEYPAD_SHIFT	4
+
+struct pm8058_led {
+	struct regmap *map;
+	u32 reg;
+	u32 ledtype;
+	struct led_classdev cdev;
+};
+
+static void pm8058_led_set(struct led_classdev *cled,
+	enum led_brightness value)
+{
+	struct pm8058_led *led;
+	int ret = 0;
+	unsigned int mask = 0;
+	unsigned int val = 0;
+
+	led = container_of(cled, struct pm8058_led, cdev);
+	switch (led->ledtype) {
+	case PM8058_LED_TYPE_COMMON:
+		mask = PM8058_LED_TYPE_COMMON_MASK;
+		val = value << PM8058_LED_TYPE_COMMON_SHIFT;
+		break;
+	case PM8058_LED_TYPE_KEYPAD:
+	case PM8058_LED_TYPE_FLASH:
+		mask = PM8058_LED_TYPE_KEYPAD_MASK;
+		val = value << PM8058_LED_TYPE_KEYPAD_SHIFT;
+		break;
+	default:
+		break;
+	}
+
+	ret = regmap_update_bits(led->map, led->reg, mask, val);
+	if (ret)
+		pr_err("Failed to set LED brightness\n");
+}
+
+static enum led_brightness pm8058_led_get(struct led_classdev *cled)
+{
+	struct pm8058_led *led;
+	int ret;
+	unsigned int val;
+
+	led = container_of(cled, struct pm8058_led, cdev);
+
+	ret = regmap_read(led->map, led->reg, &val);
+	if (ret) {
+		pr_err("Failed to get LED brightness\n");
+		return LED_OFF;
+	}
+
+	switch (led->ledtype) {
+	case PM8058_LED_TYPE_COMMON:
+		val &= PM8058_LED_TYPE_COMMON_MASK;
+		val >>= PM8058_LED_TYPE_COMMON_SHIFT;
+		break;
+	case PM8058_LED_TYPE_KEYPAD:
+	case PM8058_LED_TYPE_FLASH:
+		val &= PM8058_LED_TYPE_KEYPAD_MASK;
+		val >>= PM8058_LED_TYPE_KEYPAD_SHIFT;
+		break;
+	default:
+		val = LED_OFF;
+		break;
+	}
+
+	return val;
+}
+
+static int pm8058_led_probe(struct platform_device *pdev)
+{
+	struct pm8058_led *led;
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+	struct regmap *map;
+	const char *state;
+	enum led_brightness maxbright;
+
+	led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	led->ledtype = (u32)of_device_get_match_data(&pdev->dev);
+
+	map = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!map) {
+		dev_err(&pdev->dev, "Parent regmap unavailable.\n");
+		return -ENXIO;
+	}
+	led->map = map;
+
+	ret = of_property_read_u32(np, "reg", &led->reg);
+	if (ret) {
+		dev_err(&pdev->dev, "no register offset specified\n");
+		return -EINVAL;
+	}
+
+	/* Use label else node name */
+	led->cdev.name = of_get_property(np, "label", NULL) ? : np->name;
+	led->cdev.default_trigger =
+		of_get_property(np, "linux,default-trigger", NULL);
+	led->cdev.brightness_set = pm8058_led_set;
+	led->cdev.brightness_get = pm8058_led_get;
+	if (led->ledtype == PM8058_LED_TYPE_COMMON)
+		maxbright = 31; /* 5 bits */
+	else
+		maxbright = 15; /* 4 bits */
+	led->cdev.max_brightness = maxbright;
+
+	state = of_get_property(np, "default-state", NULL);
+	if (state) {
+		if (!strcmp(state, "keep")) {
+			led->cdev.brightness = pm8058_led_get(&led->cdev);
+		} else if (!strcmp(state, "on")) {
+			led->cdev.brightness = maxbright;
+			pm8058_led_set(&led->cdev, maxbright);
+		} else {
+			led->cdev.brightness = LED_OFF;
+			pm8058_led_set(&led->cdev, LED_OFF);
+		}
+	}
+
+	if (led->ledtype == PM8058_LED_TYPE_KEYPAD ||
+	    led->ledtype == PM8058_LED_TYPE_FLASH)
+		led->cdev.flags	= LED_CORE_SUSPENDRESUME;
+
+	ret = devm_led_classdev_register(&pdev->dev, &led->cdev);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to register led \"%s\"\n",
+			led->cdev.name);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id pm8058_leds_id_table[] = {
+	{
+		.compatible = "qcom,pm8058-led",
+		.data = (void *)PM8058_LED_TYPE_COMMON
+	},
+	{
+		.compatible = "qcom,pm8058-keypad-led",
+		.data = (void *)PM8058_LED_TYPE_KEYPAD
+	},
+	{
+		.compatible = "qcom,pm8058-flash-led",
+		.data = (void *)PM8058_LED_TYPE_FLASH
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, pm8058_leds_id_table);
+
+static struct platform_driver pm8058_led_driver = {
+	.probe		= pm8058_led_probe,
+	.driver		= {
+		.name	= "pm8058-leds",
+		.of_match_table = pm8058_leds_id_table,
+	},
+};
+module_platform_driver(pm8058_led_driver);
+
+MODULE_DESCRIPTION("PM8058 LEDs driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:pm8058-leds");

include/linux/leds.h

@@ -359,6 +359,11 @@ struct led_platform_data {
 	struct led_info	*leds;
 };
 
+struct gpio_desc;
+typedef int (*gpio_blink_set_t)(struct gpio_desc *desc, int state,
+				unsigned long *delay_on,
+				unsigned long *delay_off);
+
 /* For the leds-gpio driver */
 struct gpio_led {
 	const char *name;
@@ -382,9 +387,7 @@ struct gpio_led_platform_data {
 #define GPIO_LED_NO_BLINK_LOW	0	/* No blink GPIO state low */
 #define GPIO_LED_NO_BLINK_HIGH	1	/* No blink GPIO state high */
 #define GPIO_LED_BLINK		2	/* Please, blink */
-	int		(*gpio_blink_set)(struct gpio_desc *desc, int state,
-					unsigned long *delay_on,
-					unsigned long *delay_off);
+	gpio_blink_set_t	gpio_blink_set;
 };
 
 #ifdef CONFIG_NEW_LEDS