[media] radio-gemtek: Convert to radio-isa

Tested with actual hardware (up to two cards) and the Keene USB FM Transmitter.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/radio/Kconfig

@@ -276,6 +276,7 @@ config RADIO_AZTECH_PORT
 config RADIO_GEMTEK
 	tristate "GemTek Radio card (or compatible) support"
 	depends on ISA && VIDEO_V4L2
+	select RADIO_ISA
 	---help---
 	  Choose Y here if you have this FM radio card, and then fill in the
 	  I/O port address and settings below. The following cards either have
@@ -285,23 +286,21 @@ config RADIO_GEMTEK
 	  - Typhoon Radio card (some models)
 	  - Hama Radio card
 
-	  In order to control your radio card, you will need to use programs
-	  that are compatible with the Video For Linux API.  Information on
-	  this API and pointers to "v4l" programs may be found at
-	  <file:Documentation/video4linux/API.html>.
-
 	  To compile this driver as a module, choose M here: the
 	  module will be called radio-gemtek.
 
 config RADIO_GEMTEK_PORT
-	hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)"
+	hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)"
 	depends on RADIO_GEMTEK=y
 	default "34c"
 	help
-	  Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is
-	  0x34c, if you haven't changed the jumper setting on the card. On
-	  Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
+	  Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The
+	  card default is 0x34c, if you haven't changed the jumper setting
+	  on the card.
+
+	  On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
 	  port is 0x20c, 0x248 or 0x28c.
+
 	  If automatic I/O port probing is enabled this port will be used only
 	  in case of automatic probing failure, ie. as a fallback.