Commit f942b0fd authored by Russell King's avatar Russell King

ARM: sa11x0: neponset: move register definitions to neponset.c

Move the board specific neponset register definitions to the board
file, rather than mach/neponset.h.  However, as the NCR_0 register
definitions are used by some drivers, leave these behind.
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent bab50a35
......@@ -15,54 +15,6 @@
/*
* Neponset definitions:
*/
#define NEPONSET_CPLD_BASE (0x10000000)
#define Nep_p2v( x ) ((x) - NEPONSET_CPLD_BASE + 0xf3000000)
#define Nep_v2p( x ) ((x) - 0xf3000000 + NEPONSET_CPLD_BASE)
#define _IRR 0x10000024 /* Interrupt Reason Register */
#define _AUD_CTL 0x100000c0 /* Audio controls (RW) */
#define _MDM_CTL_0 0x100000b0 /* Modem control 0 (RW) */
#define _MDM_CTL_1 0x100000b4 /* Modem control 1 (RW) */
#define _NCR_0 0x100000a0 /* Control Register (RW) */
#define _KP_X_OUT 0x10000090 /* Keypad row write (RW) */
#define _KP_Y_IN 0x10000080 /* Keypad column read (RO) */
#define _SWPK 0x10000020 /* Switch pack (RO) */
#define _WHOAMI 0x10000000 /* System ID Register (RO) */
#define _LEDS 0x10000010 /* LEDs [31:0] (WO) */
#define IRR (*((volatile u_char *) Nep_p2v(_IRR)))
#define AUD_CTL (*((volatile u_char *) Nep_p2v(_AUD_CTL)))
#define MDM_CTL_0 (*((volatile u_char *) Nep_p2v(_MDM_CTL_0)))
#define MDM_CTL_1 (*((volatile u_char *) Nep_p2v(_MDM_CTL_1)))
#define NCR_0 (*((volatile u_char *) Nep_p2v(_NCR_0)))
#define KP_X_OUT (*((volatile u_char *) Nep_p2v(_KP_X_OUT)))
#define KP_Y_IN (*((volatile u_char *) Nep_p2v(_KP_Y_IN)))
#define SWPK (*((volatile u_char *) Nep_p2v(_SWPK)))
#define WHOAMI (*((volatile u_char *) Nep_p2v(_WHOAMI)))
#define LEDS (*((volatile Word *) Nep_p2v(_LEDS)))
#define IRR_ETHERNET (1<<0)
#define IRR_USAR (1<<1)
#define IRR_SA1111 (1<<2)
#define AUD_SEL_1341 (1<<0)
#define AUD_MUTE_1341 (1<<1)
#define MDM_CTL0_RTS1 (1 << 0)
#define MDM_CTL0_DTR1 (1 << 1)
#define MDM_CTL0_RTS2 (1 << 2)
#define MDM_CTL0_DTR2 (1 << 3)
#define MDM_CTL1_CTS1 (1 << 0)
#define MDM_CTL1_DSR1 (1 << 1)
#define MDM_CTL1_DCD1 (1 << 2)
#define MDM_CTL1_CTS2 (1 << 3)
#define MDM_CTL1_DSR2 (1 << 4)
#define MDM_CTL1_DCD2 (1 << 5)
#define NCR_GP01_OFF (1<<0)
#define NCR_TP_PWR_EN (1<<1)
#define NCR_MS_PWR_EN (1<<2)
......
......@@ -27,9 +27,40 @@
#define NEP_IRQ_SA1111 2
#define NEP_IRQ_NR 3
#define WHOAMI 0x00
#define LEDS 0x10
#define SWPK 0x20
#define IRR 0x24
#define KP_Y_IN 0x80
#define KP_X_OUT 0x90
#define NCR_0 0xa0
#define MDM_CTL_0 0xb0
#define MDM_CTL_1 0xb4
#define AUD_CTL 0xc0
#define IRR_ETHERNET (1 << 0)
#define IRR_USAR (1 << 1)
#define IRR_SA1111 (1 << 2)
#define MDM_CTL0_RTS1 (1 << 0)
#define MDM_CTL0_DTR1 (1 << 1)
#define MDM_CTL0_RTS2 (1 << 2)
#define MDM_CTL0_DTR2 (1 << 3)
#define MDM_CTL1_CTS1 (1 << 0)
#define MDM_CTL1_DSR1 (1 << 1)
#define MDM_CTL1_DCD1 (1 << 2)
#define MDM_CTL1_CTS2 (1 << 3)
#define MDM_CTL1_DSR2 (1 << 4)
#define MDM_CTL1_DCD2 (1 << 5)
#define AUD_SEL_1341 (1 << 0)
#define AUD_MUTE_1341 (1 << 1)
extern void sa1110_mb_disable(void);
struct neponset_drvdata {
void __iomem *base;
struct platform_device *sa1111;
struct platform_device *smc91x;
unsigned irq_base;
......@@ -39,19 +70,34 @@ struct neponset_drvdata {
#endif
};
static void __iomem *nep_base;
void neponset_ncr_frob(unsigned int mask, unsigned int val)
{
void __iomem *base = nep_base;
if (base) {
unsigned long flags;
unsigned v;
local_irq_save(flags);
NCR_0 = (NCR_0 & ~mask) | val;
v = readb_relaxed(base + NCR_0);
writeb_relaxed((v & ~mask) | val, base + NCR_0);
local_irq_restore(flags);
} else {
WARN(1, "nep_base unset\n");
}
}
static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
{
u_int mdm_ctl0 = MDM_CTL_0;
void __iomem *base = nep_base;
u_int mdm_ctl0;
if (!base)
return;
mdm_ctl0 = readb_relaxed(base + MDM_CTL_0);
if (port->mapbase == _Ser1UTCR0) {
if (mctrl & TIOCM_RTS)
mdm_ctl0 &= ~MDM_CTL0_RTS2;
......@@ -74,14 +120,19 @@ static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
mdm_ctl0 |= MDM_CTL0_DTR1;
}
MDM_CTL_0 = mdm_ctl0;
writeb_relaxed(mdm_ctl0, base + MDM_CTL_0);
}
static u_int neponset_get_mctrl(struct uart_port *port)
{
void __iomem *base = nep_base;
u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
u_int mdm_ctl1 = MDM_CTL_1;
u_int mdm_ctl1;
if (!base)
return ret;
mdm_ctl1 = readb_relaxed(base + MDM_CTL_1);
if (port->mapbase == _Ser1UTCR0) {
if (mdm_ctl1 & MDM_CTL1_DCD2)
ret &= ~TIOCM_CD;
......@@ -128,7 +179,8 @@ static void neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
* active IRQ bits high. Note: there is a typo in the
* Neponset user's guide for the SA1111 IRR level.
*/
irr = IRR ^ (IRR_ETHERNET | IRR_USAR);
irr = readb_relaxed(d->base + IRR);
irr ^= IRR_ETHERNET | IRR_USAR;
if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0)
break;
......@@ -182,7 +234,7 @@ static struct sa1111_platform_data sa1111_info = {
static int __devinit neponset_probe(struct platform_device *dev)
{
struct neponset_drvdata *d;
struct resource *sa1111_res, *smc91x_res;
struct resource *nep_res, *sa1111_res, *smc91x_res;
struct resource sa1111_resources[] = {
DEFINE_RES_MEM(0x40000000, SZ_8K),
{ .flags = IORESOURCE_IRQ },
......@@ -213,30 +265,40 @@ static int __devinit neponset_probe(struct platform_device *dev)
};
int ret, irq;
if (nep_base)
return -EBUSY;
irq = ret = platform_get_irq(dev, 0);
if (ret < 0)
goto err_alloc;
nep_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
smc91x_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
sa1111_res = platform_get_resource(dev, IORESOURCE_MEM, 2);
if (!smc91x_res || !sa1111_res) {
if (!nep_res || !smc91x_res || !sa1111_res) {
ret = -ENXIO;
goto err_alloc;
}
if (WHOAMI != 0x11) {
dev_warn(&dev->dev, "Neponset board detected, but wrong ID: %02x\n",
WHOAMI);
ret = -ENODEV;
goto err_alloc;
}
d = kzalloc(sizeof(*d), GFP_KERNEL);
if (!d) {
ret = -ENOMEM;
goto err_alloc;
}
d->base = ioremap(nep_res->start, SZ_4K);
if (!d->base) {
ret = -ENOMEM;
goto err_ioremap;
}
if (readb_relaxed(d->base + WHOAMI) != 0x11) {
dev_warn(&dev->dev, "Neponset board detected, but wrong ID: %02x\n",
readb_relaxed(d->base + WHOAMI));
ret = -ENODEV;
goto err_id;
}
ret = irq_alloc_descs(-1, IRQ_BOARD_START, NEP_IRQ_NR, -1);
if (ret <= 0) {
dev_err(&dev->dev, "unable to allocate %u irqs: %d\n",
......@@ -270,6 +332,7 @@ static int __devinit neponset_probe(struct platform_device *dev)
dev_info(&dev->dev, "Neponset daughter board, providing IRQ%u-%u\n",
d->irq_base, d->irq_base + NEP_IRQ_NR - 1);
nep_base = d->base;
sa1100_register_uart_fns(&neponset_port_fns);
......@@ -277,7 +340,7 @@ static int __devinit neponset_probe(struct platform_device *dev)
sa1110_mb_disable();
/* Disable GPIO 0/1 drivers so the buttons work on the Assabet */
NCR_0 = NCR_GP01_OFF;
writeb_relaxed(NCR_GP01_OFF, d->base + NCR_0);
sa1111_resources[0].parent = sa1111_res;
sa1111_resources[1].start = d->irq_base + NEP_IRQ_SA1111;
......@@ -295,6 +358,9 @@ static int __devinit neponset_probe(struct platform_device *dev)
return 0;
err_irq_alloc:
err_id:
iounmap(d->base);
err_ioremap:
kfree(d);
err_alloc:
return ret;
......@@ -311,6 +377,8 @@ static int __devexit neponset_remove(struct platform_device *dev)
platform_device_unregister(d->smc91x);
irq_set_chained_handler(irq, NULL);
irq_free_descs(d->irq_base, NEP_IRQ_NR);
nep_base = NULL;
iounmap(d->base);
kfree(d);
return 0;
......@@ -321,8 +389,8 @@ static int neponset_suspend(struct device *dev)
{
struct neponset_drvdata *d = dev_get_drvdata(dev);
d->ncr0 = NCR_0;
d->mdm_ctl_0 = MDM_CTL_0;
d->ncr0 = readb_relaxed(d->base + NCR_0);
d->mdm_ctl_0 = readb_relaxed(d->base + MDM_CTL_0);
return 0;
}
......@@ -331,8 +399,8 @@ static int neponset_resume(struct device *dev)
{
struct neponset_drvdata *d = dev_get_drvdata(dev);
NCR_0 = d->ncr0;
MDM_CTL_0 = d->mdm_ctl_0;
writeb_relaxed(d->ncr0, d->base + NCR_0);
writeb_relaxed(d->mdm_ctl_0, d->base + MDM_CTL_0);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment