Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input subsystem fixes from Dmitry Torokhov:
 "Just minor driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: twl4030-vibra - do not reparent to grandparent
  Input: twl6040-vibra - do not reparent to grandparent
  Input: twl6040-vibra - ignore return value of schedule_work
  Input: twl6040-vibra - fix NULL pointer dereference by removing workqueue
  Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delay
  Input: arizona-haptic - don't assign input_dev parent
  Input: clarify we want BTN_TOOL_<name> on proximity
  Input: xpad - add Mad Catz FightStick TE 2 VID/PID
  Input: gtco - fix crash on detecting device without endpoints

Documentation/input/event-codes.txt

@@ -173,6 +173,10 @@ A few EV_ABS codes have special meanings:
     proximity of the device and while the value of the BTN_TOUCH code is 0. If
     the input device may be used freely in three dimensions, consider ABS_Z
     instead.
+  - BTN_TOOL_<name> should be set to 1 when the tool comes into detectable
+    proximity and set to 0 when the tool leaves detectable proximity.
+    BTN_TOOL_<name> signals the type of tool that is currently detected by the
+    hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH.
 
 * ABS_MT_<name>:
   - Used to describe multitouch input events. Please see

drivers/input/joystick/xpad.c

@@ -153,6 +153,7 @@ static const struct xpad_device {
 	{ 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x0738, 0x4740, "Mad Catz Beat Pad", 0, XTYPE_XBOX360 },
+	{ 0x0738, 0x4a01, "Mad Catz FightStick TE 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
 	{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x0738, 0xb726, "Mad Catz Xbox controller - MW2", 0, XTYPE_XBOX360 },
 	{ 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 },
@@ -304,6 +305,7 @@ static struct usb_device_id xpad_table[] = {
 	XPAD_XBOX360_VENDOR(0x046d),		/* Logitech X-Box 360 style controllers */
 	XPAD_XBOX360_VENDOR(0x0738),		/* Mad Catz X-Box 360 controllers */
 	{ USB_DEVICE(0x0738, 0x4540) },		/* Mad Catz Beat Pad */
+	XPAD_XBOXONE_VENDOR(0x0738),		/* Mad Catz FightStick TE 2 */
 	XPAD_XBOX360_VENDOR(0x0e6f),		/* 0x0e6f X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x12ab),		/* X-Box 360 dance pads */
 	XPAD_XBOX360_VENDOR(0x1430),		/* RedOctane X-Box 360 controllers */

drivers/input/misc/arizona-haptics.c

@@ -178,7 +178,6 @@ static int arizona_haptics_probe(struct platform_device *pdev)
 	input_set_drvdata(haptics->input_dev, haptics);
 
 	haptics->input_dev->name = "arizona:haptics";
-	haptics->input_dev->dev.parent = pdev->dev.parent;
 	haptics->input_dev->close = arizona_haptics_close;
 	__set_bit(FF_RUMBLE, haptics->input_dev->ffbit);
 

drivers/input/misc/pmic8xxx-pwrkey.c

@@ -353,7 +353,8 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
 	if (of_property_read_u32(pdev->dev.of_node, "debounce", &kpd_delay))
 		kpd_delay = 15625;
 
-	if (kpd_delay > 62500 || kpd_delay == 0) {
+	/* Valid range of pwr key trigger delay is 1/64 sec to 2 seconds. */
+	if (kpd_delay > USEC_PER_SEC * 2 || kpd_delay < USEC_PER_SEC / 64) {
 		dev_err(&pdev->dev, "invalid power key trigger delay\n");
 		return -EINVAL;
 	}
@@ -385,8 +386,8 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
 	pwr->name = "pmic8xxx_pwrkey";
 	pwr->phys = "pmic8xxx_pwrkey/input0";
 
-	delay = (kpd_delay << 10) / USEC_PER_SEC;
-	delay = 1 + ilog2(delay);
+	delay = (kpd_delay << 6) / USEC_PER_SEC;
+	delay = ilog2(delay);
 
 	err = regmap_read(regmap, PON_CNTL_1, &pon_cntl);
 	if (err < 0) {

drivers/input/misc/twl4030-vibra.c

@@ -222,7 +222,6 @@ static int twl4030_vibra_probe(struct platform_device *pdev)
 
 	info->input_dev->name = "twl4030:vibrator";
 	info->input_dev->id.version = 1;
-	info->input_dev->dev.parent = pdev->dev.parent;
 	info->input_dev->close = twl4030_vibra_close;
 	__set_bit(FF_RUMBLE, info->input_dev->ffbit);
 

drivers/input/misc/twl6040-vibra.c

@@ -45,7 +45,6 @@
 struct vibra_info {
 	struct device *dev;
 	struct input_dev *input_dev;
-	struct workqueue_struct *workqueue;
 	struct work_struct play_work;
 	struct mutex mutex;
 	int irq;
@@ -213,11 +212,7 @@ static int vibra_play(struct input_dev *input, void *data,
 	info->strong_speed = effect->u.rumble.strong_magnitude;
 	info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1;
 
-	ret = queue_work(info->workqueue, &info->play_work);
-	if (!ret) {
-		dev_info(&input->dev, "work is already on queue\n");
-		return ret;
-	}
+	schedule_work(&info->play_work);
 
 	return 0;
 }
@@ -362,7 +357,6 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 
 	info->input_dev->name = "twl6040:vibrator";
 	info->input_dev->id.version = 1;
-	info->input_dev->dev.parent = pdev->dev.parent;
 	info->input_dev->close = twl6040_vibra_close;
 	__set_bit(FF_RUMBLE, info->input_dev->ffbit);
 

drivers/input/tablet/gtco.c

@@ -858,6 +858,14 @@ static int gtco_probe(struct usb_interface *usbinterface,
 		goto err_free_buf;
 	}
 
+	/* Sanity check that a device has an endpoint */
+	if (usbinterface->altsetting[0].desc.bNumEndpoints < 1) {
+		dev_err(&usbinterface->dev,
+			"Invalid number of endpoints\n");
+		error = -EINVAL;
+		goto err_free_urb;
+	}
+
 	/*
 	 * The endpoint is always altsetting 0, we know this since we know
 	 * this device only has one interrupt endpoint
@@ -879,7 +887,7 @@ static int gtco_probe(struct usb_interface *usbinterface,
 	 * HID report descriptor
 	 */
 	if (usb_get_extra_descriptor(usbinterface->cur_altsetting,
-				     HID_DEVICE_TYPE, &hid_desc) != 0){
+				     HID_DEVICE_TYPE, &hid_desc) != 0) {
 		dev_err(&usbinterface->dev,
 			"Can't retrieve exta USB descriptor to get hid report descriptor length\n");
 		error = -EIO;