[NET] smc91x: favor the use of SMC91X_USE_* instead of SMC_CAN_USE_*

Let's simplify the logic and avoid confusion, the use of SMC91X_USE_*
is favored than SMC_CAN_USE_*, if platform data isn't given, convert
the hardcoded SMC_CAN_USE_* to SMC91X_USE_*.
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

drivers/net/smc91x.c

@@ -2154,20 +2154,14 @@ static int smc_drv_probe(struct platform_device *pdev)
 
 	lp = netdev_priv(ndev);
 
-#ifdef SMC_DYNAMIC_BUS_CONFIG
 	if (pd)
 		memcpy(&lp->cfg, pd, sizeof(lp->cfg));
 	else {
-		lp->cfg.flags = SMC91X_USE_8BIT;
-		lp->cfg.flags |= SMC91X_USE_16BIT;
-		lp->cfg.flags |= SMC91X_USE_32BIT;
+		lp->cfg.flags |= (SMC_CAN_USE_8BIT)  ? SMC91X_USE_8BIT  : 0;
+		lp->cfg.flags |= (SMC_CAN_USE_16BIT) ? SMC91X_USE_16BIT : 0;
+		lp->cfg.flags |= (SMC_CAN_USE_32BIT) ? SMC91X_USE_32BIT : 0;
 	}
 
-	lp->cfg.flags &= ~(SMC_CAN_USE_8BIT ? 0 : SMC91X_USE_8BIT);
-	lp->cfg.flags &= ~(SMC_CAN_USE_16BIT ? 0 : SMC91X_USE_16BIT);
-	lp->cfg.flags &= ~(SMC_CAN_USE_32BIT ? 0 : SMC91X_USE_32BIT);
-#endif
-
 	ndev->dma = (unsigned char)-1;
 
 	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);

drivers/net/smc91x.h

@@ -454,7 +454,6 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
 #define RPC_LSA_DEFAULT		RPC_LED_100_10
 #define RPC_LSB_DEFAULT		RPC_LED_TX_RX
 
-#define SMC_DYNAMIC_BUS_CONFIG
 #endif
 
 
@@ -504,15 +503,9 @@ struct smc_local {
 	struct smc91x_platdata cfg;
 };
 
-#ifdef SMC_DYNAMIC_BUS_CONFIG
-#define SMC_8BIT(p) (((p)->cfg.flags & SMC91X_USE_8BIT) && SMC_CAN_USE_8BIT)
-#define SMC_16BIT(p) (((p)->cfg.flags & SMC91X_USE_16BIT) && SMC_CAN_USE_16BIT)
-#define SMC_32BIT(p) (((p)->cfg.flags & SMC91X_USE_32BIT) && SMC_CAN_USE_32BIT)
-#else
-#define SMC_8BIT(p) SMC_CAN_USE_8BIT
-#define SMC_16BIT(p) SMC_CAN_USE_16BIT
-#define SMC_32BIT(p) SMC_CAN_USE_32BIT
-#endif
+#define SMC_8BIT(p)	((p)->cfg.flags & SMC91X_USE_8BIT)
+#define SMC_16BIT(p)	((p)->cfg.flags & SMC91X_USE_16BIT)
+#define SMC_32BIT(p)	((p)->cfg.flags & SMC91X_USE_32BIT)
 
 #ifdef SMC_USE_PXA_DMA
 /*