drm/nva3: split pm backend out from nv50

This will end up quite different, it makes sense for it to be completely
separate.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drivers/gpu/drm/nouveau/Makefile

@@ -10,7 +10,7 @@ nouveau-y := nouveau_drv.o nouveau_state.o nouveau_channel.o nouveau_mem.o \
              nouveau_hw.o nouveau_calc.o nouveau_bios.o nouveau_i2c.o \
              nouveau_display.o nouveau_connector.o nouveau_fbcon.o \
              nouveau_dp.o nouveau_ramht.o \
-	     nouveau_pm.o nouveau_volt.o nouveau_perf.o \
+	     nouveau_pm.o nouveau_volt.o nouveau_perf.o nouveau_temp.o \
              nv04_timer.o \
              nv04_mc.o nv40_mc.o nv50_mc.o \
              nv04_fb.o nv10_fb.o nv30_fb.o nv40_fb.o nv50_fb.o nvc0_fb.o \
@@ -25,7 +25,7 @@ nouveau-y := nouveau_drv.o nouveau_state.o nouveau_channel.o nouveau_mem.o \
              nv04_crtc.o nv04_display.o nv04_cursor.o nv04_fbcon.o \
              nv10_gpio.o nv50_gpio.o \
 	     nv50_calc.o \
-	     nv04_pm.o nv50_pm.o nouveau_temp.o
+	     nv04_pm.o nv50_pm.o nva3_pm.o
 
 nouveau-$(CONFIG_DRM_NOUVEAU_DEBUG) += nouveau_debugfs.o
 nouveau-$(CONFIG_COMPAT) += nouveau_ioc32.o

drivers/gpu/drm/nouveau/nouveau_pm.h

@@ -58,6 +58,12 @@ void *nv50_pm_clock_pre(struct drm_device *, struct nouveau_pm_level *,
 			u32 id, int khz);
 void nv50_pm_clock_set(struct drm_device *, void *);
 
+/* nva3_pm.c */
+int nva3_pm_clock_get(struct drm_device *, u32 id);
+void *nva3_pm_clock_pre(struct drm_device *, struct nouveau_pm_level *,
+			u32 id, int khz);
+void nva3_pm_clock_set(struct drm_device *, void *);
+
 /* nouveau_temp.c */
 void nouveau_temp_init(struct drm_device *dev);
 void nouveau_temp_fini(struct drm_device *dev);

drivers/gpu/drm/nouveau/nouveau_state.c

@@ -375,9 +375,21 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->gpio.get		= nv50_gpio_get;
 		engine->gpio.set		= nv50_gpio_set;
 		engine->gpio.irq_enable		= nv50_gpio_irq_enable;
+		switch (dev_priv->chipset) {
+		case 0xa3:
+		case 0xa5:
+		case 0xa8:
+		case 0xaf:
+			engine->pm.clock_get	= nva3_pm_clock_get;
+			engine->pm.clock_pre	= nva3_pm_clock_pre;
+			engine->pm.clock_set	= nva3_pm_clock_set;
+			break;
+		default:
 			engine->pm.clock_get	= nv50_pm_clock_get;
 			engine->pm.clock_pre	= nv50_pm_clock_pre;
 			engine->pm.clock_set	= nv50_pm_clock_set;
+			break;
+		}
 		engine->pm.voltage_get		= nouveau_voltage_gpio_get;
 		engine->pm.voltage_set		= nouveau_voltage_gpio_set;
 		if (dev_priv->chipset >= 0x84)

drivers/gpu/drm/nouveau/nv50_pm.c

@@ -27,12 +27,6 @@
 #include "nouveau_bios.h"
 #include "nouveau_pm.h"
 
-/*XXX: boards using limits 0x40 need fixing, the register layout
- *     is correct here, but, there's some other funny magic
- *     that modifies things, so it's not likely we'll set/read
- *     the correct timings yet..  working on it...
- */
-
 struct nv50_pm_state {
 	struct nouveau_pm_level *perflvl;
 	struct pll_lims pll;
@@ -51,7 +45,6 @@ nv50_pm_clock_get(struct drm_device *dev, u32 id)
 	if (ret)
 		return ret;
 
-	if (pll.vco2.maxfreq) {
 	reg0 = nv_rd32(dev, pll.reg + 0);
 	reg1 = nv_rd32(dev, pll.reg + 4);
 	P = (reg0 & 0x00070000) >> 16;
@@ -59,13 +52,6 @@ nv50_pm_clock_get(struct drm_device *dev, u32 id)
 	M = (reg1 & 0x000000ff);
 
 	return ((pll.refclk * N / M) >> P);
-	}
-
-	reg0 = nv_rd32(dev, pll.reg + 4);
-	P = (reg0 & 0x003f0000) >> 16;
-	N = (reg0 & 0x0000ff00) >> 8;
-	M = (reg0 & 0x000000ff);
-	return pll.refclk * N / M / P;
 }
 
 void *
@@ -125,7 +111,6 @@ nv50_pm_clock_set(struct drm_device *dev, void *pre_state)
 		nouveau_bios_run_init_table(dev, perflvl->memscript, NULL);
 	}
 
-	if (state->pll.vco2.maxfreq) {
 	if (state->type == PLL_MEMORY) {
 		nv_wr32(dev, 0x100210, 0);
 		nv_wr32(dev, 0x1002dc, 1);
@@ -140,9 +125,6 @@ nv50_pm_clock_set(struct drm_device *dev, void *pre_state)
 		nv_wr32(dev, 0x1002dc, 0);
 		nv_wr32(dev, 0x100210, 0x80000000);
 	}
-	} else {
-		nv_wr32(dev, reg + 4, (P << 16) | (N << 8) | M);
-	}
 
 	kfree(state);
 }

drivers/gpu/drm/nouveau/nva3_pm.c

+/*
+ * Copyright 2010 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Ben Skeggs
+ */
+
+#include "drmP.h"
+#include "nouveau_drv.h"
+#include "nouveau_bios.h"
+#include "nouveau_pm.h"
+
+/*XXX: boards using limits 0x40 need fixing, the register layout
+ *     is correct here, but, there's some other funny magic
+ *     that modifies things, so it's not likely we'll set/read
+ *     the correct timings yet..  working on it...
+ */
+
+struct nva3_pm_state {
+	struct pll_lims pll;
+	int N, M, P;
+};
+
+int
+nva3_pm_clock_get(struct drm_device *dev, u32 id)
+{
+	struct pll_lims pll;
+	int P, N, M, ret;
+	u32 reg;
+
+	ret = get_pll_limits(dev, id, &pll);
+	if (ret)
+		return ret;
+
+	reg = nv_rd32(dev, pll.reg + 4);
+	P = (reg & 0x003f0000) >> 16;
+	N = (reg & 0x0000ff00) >> 8;
+	M = (reg & 0x000000ff);
+	return pll.refclk * N / M / P;
+}
+
+void *
+nva3_pm_clock_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl,
+		  u32 id, int khz)
+{
+	struct nva3_pm_state *state;
+	int dummy, ret;
+
+	state = kzalloc(sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return ERR_PTR(-ENOMEM);
+
+	ret = get_pll_limits(dev, id, &state->pll);
+	if (ret < 0) {
+		kfree(state);
+		return (ret == -ENOENT) ? NULL : ERR_PTR(ret);
+	}
+
+	ret = nv50_calc_pll2(dev, &state->pll, khz, &state->N, &dummy,
+			     &state->M, &state->P);
+	if (ret < 0) {
+		kfree(state);
+		return ERR_PTR(ret);
+	}
+
+	return state;
+}
+
+void
+nva3_pm_clock_set(struct drm_device *dev, void *pre_state)
+{
+	struct nva3_pm_state *state = pre_state;
+	u32 reg = state->pll.reg;
+
+	nv_wr32(dev, reg + 4, (state->P << 16) | (state->N << 8) | state->M);
+	kfree(state);
+}
+