V4L (0990): Enable IR support for the Nova-S-Plus

- Enable IR support for the Nova-S-Plus.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>

Documentation/video4linux/CARDLIST.cx88

@@ -35,5 +35,5 @@
  34 -> ATI HDTV Wonder                                     [1002:a101]
  35 -> WinFast DTV1000-T                                   [107d:665f]
  36 -> AVerTV 303 (M126)                                   [1461:000a]
- 37 -> Hauppauge Nova-S-Plus DVB-S                         [0070:9200]
- 38 -> Hauppauge Nova-SE2 DVB-S                            [0070:9202]
+ 37 -> Hauppauge Nova-S-Plus DVB-S                         [0070:9201,0070:9202]
+ 38 -> Hauppauge Nova-SE2 DVB-S                            [0070:9200]

drivers/media/video/cx88/cx88-cards.c

@@ -1078,11 +1078,15 @@ struct cx88_subid cx88_subids[] = {
 	},{
 		.subvendor = 0x0070,
 		.subdevice = 0x9200,
+		.card      = CX88_BOARD_HAUPPAUGE_NOVASE2_S1,
+	},{
+		.subvendor = 0x0070,
+		.subdevice = 0x9201,
 		.card      = CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1,
 	},{
 		.subvendor = 0x0070,
 		.subdevice = 0x9202,
-		.card      = CX88_BOARD_HAUPPAUGE_NOVASE2_S1,
+		.card      = CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1,
 	},
 };
 const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids);

drivers/media/video/cx88/cx88-input.c

@@ -388,6 +388,8 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 		break;
 	case CX88_BOARD_HAUPPAUGE:
 	case CX88_BOARD_HAUPPAUGE_DVB_T1:
+	case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
+	case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
 		ir_codes = ir_codes_hauppauge_new;
 		ir_type = IR_TYPE_RC5;
 		ir->sampling = 1;
@@ -567,6 +569,8 @@ void cx88_ir_irq(struct cx88_core *core)
 		break;
 	case CX88_BOARD_HAUPPAUGE:
 	case CX88_BOARD_HAUPPAUGE_DVB_T1:
+	case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
+	case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
 		ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
 		ir_dprintk("biphase decoded: %x\n", ircode);
 		if ((ircode & 0xfffff000) != 0x3000)