Commit fc1ca6e0 authored by Jerome Brunet's avatar Jerome Brunet Committed by Neil Armstrong

drm/bridge: dw-hdmi-i2s: add .get_eld support

Provide the eld to the generic hdmi-codec driver.
This will let the driver enforce the maximum channel number and set the
channel allocation depending on the hdmi sink.

Cc: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: default avatarJerome Brunet <jbrunet@baylibre.com>
Reviewed-by: default avatarJonas Karlman <jonas@kwiboo.se>
Reviewed-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812125016.20169-1-jbrunet@baylibre.com
parent 43e88f67
......@@ -14,6 +14,7 @@ struct dw_hdmi_audio_data {
struct dw_hdmi_i2s_audio_data {
struct dw_hdmi *hdmi;
u8 *eld;
void (*write)(struct dw_hdmi *hdmi, u8 val, int offset);
u8 (*read)(struct dw_hdmi *hdmi, int offset);
......
......@@ -10,6 +10,7 @@
#include <linux/module.h>
#include <drm/bridge/dw_hdmi.h>
#include <drm/drm_crtc.h>
#include <sound/hdmi-codec.h>
......@@ -121,6 +122,15 @@ static void dw_hdmi_i2s_audio_shutdown(struct device *dev, void *data)
dw_hdmi_audio_disable(hdmi);
}
static int dw_hdmi_i2s_get_eld(struct device *dev, void *data, uint8_t *buf,
size_t len)
{
struct dw_hdmi_i2s_audio_data *audio = data;
memcpy(buf, audio->eld, min_t(size_t, MAX_ELD_BYTES, len));
return 0;
}
static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
struct device_node *endpoint)
{
......@@ -144,6 +154,7 @@ static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
static struct hdmi_codec_ops dw_hdmi_i2s_ops = {
.hw_params = dw_hdmi_i2s_hw_params,
.audio_shutdown = dw_hdmi_i2s_audio_shutdown,
.get_eld = dw_hdmi_i2s_get_eld,
.get_dai_id = dw_hdmi_i2s_get_dai_id,
};
......
......@@ -2799,6 +2799,7 @@ __dw_hdmi_probe(struct platform_device *pdev,
struct dw_hdmi_i2s_audio_data audio;
audio.hdmi = hdmi;
audio.eld = hdmi->connector.eld;
audio.write = hdmi_writeb;
audio.read = hdmi_readb;
hdmi->enable_audio = dw_hdmi_i2s_audio_enable;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment