i915: fix ironlake edp panel setup (v4)

The eDP spec claims a 20% overhead for the 8:10 encoding scheme used
on the wire. Take this into account when picking the lane/clock speed
for the panel.

v3: some panels are out of spec, try our best to deal with them, don't
refuse modes on eDP panels, and try the largest allowed settings if
all else fails on eDP.
v4: fix stupid typo, forgot to git add before amending.

Fixes several reports in bugzilla:

      https://bugs.freedesktop.org/show_bug.cgi?id=28070Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

drivers/gpu/drm/i915/intel_dp.c

@@ -135,6 +135,12 @@ intel_dp_link_required(struct drm_device *dev,
 		return pixel_clock * 3;
 }
 
+static int
+intel_dp_max_data_rate(int max_link_clock, int max_lanes)
+{
+	return (max_link_clock * max_lanes * 8) / 10;
+}
+
 static int
 intel_dp_mode_valid(struct drm_connector *connector,
 		    struct drm_display_mode *mode)
@@ -144,8 +150,11 @@ intel_dp_mode_valid(struct drm_connector *connector,
 	int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_encoder));
 	int max_lanes = intel_dp_max_lane_count(intel_encoder);
 
-	if (intel_dp_link_required(connector->dev, intel_encoder, mode->clock)
-			> max_link_clock * max_lanes)
+	/* only refuse the mode on non eDP since we have seen some wierd eDP panels
+	   which are outside spec tolerances but somehow work by magic */
+	if (!IS_eDP(intel_encoder) &&
+	    (intel_dp_link_required(connector->dev, intel_encoder, mode->clock)
+	     > intel_dp_max_data_rate(max_link_clock, max_lanes)))
 		return MODE_CLOCK_HIGH;
 
 	if (mode->clock < 10000)
@@ -506,7 +515,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
 
 	for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
 		for (clock = 0; clock <= max_clock; clock++) {
-			int link_avail = intel_dp_link_clock(bws[clock]) * lane_count;
+			int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
 
 			if (intel_dp_link_required(encoder->dev, intel_encoder, mode->clock)
 					<= link_avail) {
@@ -521,6 +530,18 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
 			}
 		}
 	}
+
+	if (IS_eDP(intel_encoder)) {
+		/* okay we failed just pick the highest */
+		dp_priv->lane_count = max_lane_count;
+		dp_priv->link_bw = bws[max_clock];
+		adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
+		DRM_DEBUG_KMS("Force picking display port link bw %02x lane "
+			      "count %d clock %d\n",
+			      dp_priv->link_bw, dp_priv->lane_count,
+			      adjusted_mode->clock);
+		return true;
+	}
 	return false;
 }