Commit fea3c39a authored by Antti Palosaari's avatar Antti Palosaari Committed by Mauro Carvalho Chehab

[media] anysee: add support for Anysee E7 PS2

Basically it is just same device as Anysee E7 S2 but made for
internal PCI(e) slot and motherboard USB connector.

Cc: info@anysee.com
Signed-off-by: default avatarAntti Palosaari <crope@iki.fi>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 8439e0df
...@@ -434,6 +434,14 @@ static struct isl6423_config anysee_isl6423_config = { ...@@ -434,6 +434,14 @@ static struct isl6423_config anysee_isl6423_config = {
* IOD[5] TDA10023 0=disabled * IOD[5] TDA10023 0=disabled
* IOD[6] ZL10353 1=enabled * IOD[6] ZL10353 1=enabled
* IOE[0] IF 0=enabled * IOE[0] IF 0=enabled
*
* E7 S2 VID=1c73 PID=861f HW=22 FW=0.1 AMTCI=?? "anysee-E7PS2(LP)"
* PCB: 508PS2 (rev0.4)
* parts: DNBU10512IST(STV0903, STV6110), ISL6423
* OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
* IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
* IOA[7] TS 1=enabled
* IOE[5] STV0903 1=enabled
*/ */
static int anysee_frontend_attach(struct dvb_usb_adapter *adap) static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
...@@ -667,7 +675,9 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) ...@@ -667,7 +675,9 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
break; break;
case ANYSEE_HW_508S2: /* 19 */ case ANYSEE_HW_508S2: /* 19 */
case ANYSEE_HW_508PS2: /* 22 */
/* E7 S2 */ /* E7 S2 */
/* E7 PS2 */
/* enable transport stream on IOA[7] */ /* enable transport stream on IOA[7] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80); ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80);
...@@ -794,7 +804,9 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap) ...@@ -794,7 +804,9 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
break; break;
case ANYSEE_HW_508S2: /* 19 */ case ANYSEE_HW_508S2: /* 19 */
case ANYSEE_HW_508PS2: /* 22 */
/* E7 S2 */ /* E7 S2 */
/* E7 PS2 */
/* attach tuner */ /* attach tuner */
fe = dvb_attach(stv6110_attach, adap->fe, fe = dvb_attach(stv6110_attach, adap->fe,
......
...@@ -69,6 +69,7 @@ struct anysee_state { ...@@ -69,6 +69,7 @@ struct anysee_state {
#define ANYSEE_HW_508TC 18 /* E7 TC */ #define ANYSEE_HW_508TC 18 /* E7 TC */
#define ANYSEE_HW_508S2 19 /* E7 S2 */ #define ANYSEE_HW_508S2 19 /* E7 S2 */
#define ANYSEE_HW_508PTC 21 /* E7 PTC Plus */ #define ANYSEE_HW_508PTC 21 /* E7 PTC Plus */
#define ANYSEE_HW_508PS2 22 /* E7 PS2 Plus */
#define REG_IOA 0x80 /* Port A (bit addressable) */ #define REG_IOA 0x80 /* Port A (bit addressable) */
#define REG_IOB 0x90 /* Port B (bit addressable) */ #define REG_IOB 0x90 /* Port B (bit addressable) */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment