ARM: imx5: move init hooks into mach-imx5x.c

These imx5 init_early[late] hooks are called only from mach-imx5x.c.
Let's move them into mach-imx5x.c.

While at it, replace the static mapping in imx51_ipu_mipi_setup() with
dynamic mapping.  Also this function and imx_src_init() do not
necessarily to be called at .init_early hook, so move them into
.init_machine.

The mxc_iomux_v3_init() is dropped from imx51_init_early() in the
moving, since it's only needed by non-DT boot.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

arch/arm/mach-imx/common.h

@@ -34,8 +34,6 @@ void imx25_init_early(void);
 void imx27_init_early(void);
 void imx31_init_early(void);
 void imx35_init_early(void);
-void imx51_init_early(void);
-void imx53_init_early(void);
 void mxc_init_irq(void __iomem *);
 void tzic_init_irq(void);
 void mx1_init_irq(void);
@@ -50,8 +48,6 @@ void imx25_soc_init(void);
 void imx27_soc_init(void);
 void imx31_soc_init(void);
 void imx35_soc_init(void);
-void imx51_init_late(void);
-void imx53_init_late(void);
 void epit_timer_init(void __iomem *base, int irq);
 void mxc_timer_init(void __iomem *, int);
 void mxc_timer_init_dt(struct device_node *);

arch/arm/mach-imx/mach-imx51.c

@@ -10,6 +10,7 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
@@ -17,18 +18,56 @@
 #include <asm/mach/time.h>
 
 #include "common.h"
+#include "hardware.h"
 #include "mx51.h"
 
+static void __init imx51_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX51);
+}
+
+/*
+ * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by
+ * the Freescale marketing division. However this did not remove the
+ * hardware from the chip which still needs to be configured for proper
+ * IPU support.
+ */
+#define MX51_MIPI_HSC_BASE 0x83fdc000
+static void __init imx51_ipu_mipi_setup(void)
+{
+	void __iomem *hsc_addr;
+
+	hsc_addr = ioremap(MX51_MIPI_HSC_BASE, SZ_16K);
+	WARN_ON(!hsc_addr);
+
+	/* setup MIPI module to legacy mode */
+	__raw_writel(0xf00, hsc_addr);
+
+	/* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */
+	__raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff,
+		hsc_addr + 0x800);
+
+	iounmap(hsc_addr);
+}
+
 static void __init imx51_dt_init(void)
 {
 	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
 
 	mxc_arch_reset_init_dt();
+	imx51_ipu_mipi_setup();
+	imx_src_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	platform_device_register_full(&devinfo);
 }
 
+static void __init imx51_init_late(void)
+{
+	mx51_neon_fixup();
+	imx51_pm_init();
+}
+
 static const char *imx51_dt_board_compat[] __initconst = {
 	"fsl,imx51",
 	NULL

arch/arm/mach-imx/mach-imx53.c

@@ -24,13 +24,24 @@
 #include "hardware.h"
 #include "mx53.h"
 
+static void __init imx53_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX53);
+}
+
 static void __init imx53_dt_init(void)
 {
 	mxc_arch_reset_init_dt();
+	imx_src_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
+static void __init imx53_init_late(void)
+{
+	imx53_pm_init();
+}
+
 static const char *imx53_dt_board_compat[] __initconst = {
 	"fsl,imx53",
 	NULL

arch/arm/mach-imx/mm-imx5.c

@@ -59,47 +59,3 @@ void __init mx53_map_io(void)
 {
 	iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
 }
-
-/*
- * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by
- * the Freescale marketing division. However this did not remove the
- * hardware from the chip which still needs to be configured for proper
- * IPU support.
- */
-static void __init imx51_ipu_mipi_setup(void)
-{
-	void __iomem *hsc_addr;
-	hsc_addr = MX51_IO_ADDRESS(MX51_MIPI_HSC_BASE_ADDR);
-
-	/* setup MIPI module to legacy mode */
-	__raw_writel(0xf00, hsc_addr);
-
-	/* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */
-	__raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff,
-		hsc_addr + 0x800);
-}
-
-void __init imx51_init_early(void)
-{
-	imx51_ipu_mipi_setup();
-	mxc_set_cpu_type(MXC_CPU_MX51);
-	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
-	imx_src_init();
-}
-
-void __init imx53_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX53);
-	imx_src_init();
-}
-
-void __init imx51_init_late(void)
-{
-	mx51_neon_fixup();
-	imx51_pm_init();
-}
-
-void __init imx53_init_late(void)
-{
-	imx53_pm_init();
-}