- 01 Aug, 2016 36 commits
-
-
Anshuman Khandual authored
This patch splits gpr32_get, gpr32_set functions to accommodate in transaction ptrace requests implemented in patches later in the series. Signed-off-by:
Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by:
Simon Guo <wei.guo.simon@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Anshuman Khandual authored
This patch enables in transaction NT_PPC_VSX ptrace requests. The function vsr_get which gets the running value of all VSX registers and the function vsr_set which sets the running value of of all VSX registers work on the running set of VMX registers whose location will be different if transaction is active. This patch makes these functions adapt to situations when the transaction is active. Signed-off-by:
-
Anshuman Khandual authored
This patch enables in transaction NT_PPC_VMX ptrace requests. The function vr_get which gets the running value of all VMX registers and the function vr_set which sets the running value of of all VMX registers work on the running set of VMX registers whose location will be different if transaction is active. This patch makes these functions adapt to situations when the transaction is active. Signed-off-by:
-
Anshuman Khandual authored
This patch enables in transaction NT_PRFPREG ptrace requests. The function fpr_get which gets the running value of all FPR registers and the function fpr_set which sets the running value of of all FPR registers work on the running set of FPR registers whose location will be different if transaction is active. This patch makes these functions adapt to situations when the transaction is active. Signed-off-by:
-
Anshuman Khandual authored
This patch creates a function flush_tmregs_to_thread which will then be used by subsequent patches in this series. The function checks for self tracing ptrace interface attempts while in the TM context and logs appropriate warning message. Signed-off-by:
-
Anshuman Khandual authored
This patch adds twelve ELF core note sections for powerpc architecture for various registers and register sets which need to be accessed from ptrace interface and then gdb. These additions include special purpose registers like TAR, PPR, DSCR, TM running and checkpointed state for various register sets, EBB related register set, performance monitor register set etc. Addition of these new ELF core note sections extends the existing ELF ABI on powerpc arch without affecting it in any manner. Signed-off-by:
-
Aneesh Kumar K.V authored
This should be same as flush_tlb_page except for hash32. For hash32 I guess the existing code is wrong, because we don't seem to be flushing tlb for Hash != 0 case at all. Fix this by switching to calling flush_tlb_page() which does the right thing by flushing tlb for both hash and nohash case with hash32 Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
Some archs like ppc64 need to do special things when flushing tlb for hugepage. Add a new helper to flush hugetlb tlb range. This helps us to avoid flushing the entire tlb mapping for the pid. Signed-off-by:
-
Aneesh Kumar K.V authored
Use the helper instead of open coding the same at multiple place Signed-off-by:
-
Aneesh Kumar K.V authored
Signed-off-by:
-
Aneesh Kumar K.V authored
Instead of flushing the entire mm, implement a flush_pmd_tlb_range Signed-off-by:
-
Aneesh Kumar K.V authored
Signed-off-by:
-
Aneesh Kumar K.V authored
Use flush_hugetlb_page instead of flush_tlb_page when we clear flush the pte. Signed-off-by:
-
Aneesh Kumar K.V authored
Replace opencoding of the same at multiple places with the helper. No functional change with this patch. Signed-off-by:
-
Aneesh Kumar K.V authored
Now that we track page size in mmu_gather, we can use address based tlbie format when doing a tlb_flush(). We don't do this if we are invalidating the full address space. Signed-off-by:
-
Michael Ellerman authored
Add a comment to the generated assembler for jump labels. This makes it easier to identify them in asm listings (generated with $ make foo.s). Signed-off-by: -
Aneesh Kumar K.V authored
This allows us to catch incorrect usage of cpu_has_feature() and mmu_has_feature() prior to jump labels being initialised. mpe: Use printk() and dump_stack() rather than WARN_ON(), because WARN_ON() may not work this early in boot. Rename the Kconfig. Signed-off-by:
-
Kevin Hao authored
As we just did for CPU features. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
-
Kevin Hao authored
We do binary patching of asm code using CPU features, which is a one-time operation, done during early boot. However checks of CPU features in C code are currently done at run time, even though the set of CPU features can never change after boot. We can optimise this by using jump labels to implement cpu_has_feature(), meaning checks in C code are binary patched into a single nop or branch. For a C sequence along the lines of: if (cpu_has_feature(FOO)) return 2; The generated code before is roughly: ld r9,-27640(r2) ld r9,0(r9) lwz r9,32(r9) cmpwi cr7,r9,0 bge cr7, 1f li r3,2 blr 1: ... After (true): nop li r3,2 blr After (false): b 1f li r3,2 blr 1: ... mpe: Rename MAX_CPU_FEATURES as we already have a #define with that name, and define it simply as a constant, rather than doing tricks with sizeof and NULL pointers. Rename the array to cpu_feature_keys. Use the kconfig we added to guard it. Add BUILD_BUG_ON() if the feature is not a compile time constant. Rewrite the change log. Signed-off-by: -
Michael Ellerman authored
Add a kconfig option to control whether we use jump label for the cpu/mmu_has_feature() checks. Currently this does nothing, but we will enabled it in the subsequent patches. Signed-off-by: -
Kevin Hao authored
We plan to use jump label for cpu_has_feature(). In order to implement this we need to include the linux/jump_label.h in asm/cputable.h. Unfortunately if we do that it leads to an include loop. The root of the problem seems to be that reg.h needs cputable.h (for CPU_FTRs), and then cputable.h via jump_label.h eventually pulls in hw_irq.h which needs reg.h (for MSR_EE). So move cpu_has_feature() to a separate file on its own. Signed-off-by:
-
Kevin Hao authored
This function is only used by get_vtb(). They are almost the same except the reading from the real register. Move the mfspr() to get_vtb() and kill the function mfvtb(). With this, we can eliminate the use of cpu_has_feature() in very core header file like reg.h. This is a preparation for the use of jump label for cpu_has_feature(). Signed-off-by:
-
Aneesh Kumar K.V authored
Call jump_label_init() early so that we can use static keys for CPU and MMU feature checks. Signed-off-by:
-
Kevin Hao authored
Some arches (powerpc at least) would like to invoke jump_label_init() much earlier in boot. So check static_key_initialized in order to make sure this function runs only once. LGTM-by: Ingo (http://marc.info/?l=linux-kernel&m=144049104329961&w=2) Signed-off-by:
-
Aneesh Kumar K.V authored
This switches early feature checks to use the non static key variant of the function. In later patches we will be switching cpu_has_feature() and mmu_has_feature() to use static keys and we can use them only after static key/jump label is initialized. Any check for feature before jump label init should be done using this new helper. Signed-off-by:
-
Michael Ellerman authored
In later patches, we will be switching CPU and MMU feature checks to use static keys. For checks in early boot before jump label is initialized we need a variant of [cpu|mmu]_has_feature() that doesn't use jump labels. So create those called, unimaginatively, early_[cpu|mmu]_has_feature(). Signed-off-by:
-
Michael Ellerman authored
Currently we have radix_enabled() three times, twice in asm/book3s/64/mmu.h and then a fallback in asm/mmu.h. Consolidate them in asm/mmu.h. While we're at it convert them to be static inlines, and change the fallback case to returning a bool, like mmu_has_feature(). Signed-off-by: -
Michael Ellerman authored
The intention is that the result is only used as a boolean, so enforce that by changing the return type to bool. Signed-off-by: -
Michael Ellerman authored
The intention is that the result is only used as a boolean, so enforce that by changing the return type to bool. Signed-off-by: -
Aneesh Kumar K.V authored
MMU feature bits are defined such that we use the lower half to present MMU family features. Remove the strict split of half and also move Radix to a mmu family feature. Radix introduce a new MMU model and strictly speaking it is a new MMU family. This also free up bits which can be used for individual features later. Signed-off-by:
-
Michael Ellerman authored
Early in boot we binary patch some sections of code based on the CPU and MMU feature bits. But it is a one-time patching, there is no facility for repatching the code later if the set of features change. It is a major bug if the set of features changes after we've done the code patching - so add a check for it. Signed-off-by: -
Michael Ellerman authored
Up until now we needed to do the MMU init before feature patching, because part of the MMU init was scanning the device tree and setting and/or clearing some MMU feature bits. Now that we have split that MMU feature modification out into routines called from early_init_devtree() (called earlier) we can now do feature patching before calling MMU init. The advantage of this is it means the remainder of the MMU init runs with the final set of features which will apply for the rest of the life of the system. This means we don't have to special case anything called from MMU init to deal with a changing set of feature bits. Signed-off-by: -
Michael Ellerman authored
Like we just did for hash, split the device tree scanning parts out and call them from mmu_early_init_devtree(). Signed-off-by: -
Michael Ellerman authored
Currently MMU initialisation (early_init_mmu()) consists of a mixture of scanning the device tree, setting MMU feature bits, and then also doing actual initialisation of MMU data structures. We'd like to decouple the setting of the MMU features from the actual setup. So split out the device tree scanning, and associated code, and call it from mmu_init_early_devtree(). Signed-off-by: -
Michael Ellerman authored
Move the handling of the disable_radix command line argument into the newly created mmu_early_init_devtree(). It's an MMU option so it's preferable to have it in an mm related file, and it also means platforms that don't support radix don't have to carry the code. Signed-off-by: -
Michael Ellerman authored
Empty for now, but we'll add to it in the next patch. Signed-off-by:
-
- 31 Jul, 2016 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc updates from Michael Ellerman: "Highlights: - PowerNV PCI hotplug support. - Lots more Power9 support. - eBPF JIT support on ppc64le. - Lots of cxl updates. - Boot code consolidation. Bug fixes: - Fix spin_unlock_wait() from Boqun Feng - Fix stack pointer corruption in __tm_recheckpoint() from Michael Neuling - Fix multiple bugs in memory_hotplug_max() from Bharata B Rao - mm: Ensure "special" zones are empty from Oliver O'Halloran - ftrace: Separate the heuristics for checking call sites from Michael Ellerman - modules: Never restore r2 for a mprofile-kernel style mcount() call from Michael Ellerman - Fix endianness when reading TCEs from Alexey Kardashevskiy - start rtasd before PCI probing from Greg Kurz - PCI: rpaphp: Fix slot registration for multiple slots under a PHB from Tyrel Datwyler - powerpc/mm: Add memory barrier in __hugepte_alloc() from Sukadev Bhattiprolu Cleanups & fixes: - Drop support for MPIC in pseries from Rashmica Gupta - Define and use PPC64_ELF_ABI_v2/v1 from Michael Ellerman - Remove unused symbols in asm-offsets.c from Rashmica Gupta - Fix SRIOV not building without EEH enabled from Russell Currey - Remove kretprobe_trampoline_holder from Thiago Jung Bauermann - Reduce log level of PCI I/O space warning from Benjamin Herrenschmidt - Add array bounds checking to crash_shutdown_handlers from Suraj Jitindar Singh - Avoid -maltivec when using clang integrated assembler from Anton Blanchard - Fix array overrun in ppc_rtas() syscall from Andrew Donnellan - Fix error return value in cmm_mem_going_offline() from Rasmus Villemoes - export cpu_to_core_id() from Mauricio Faria de Oliveira - Remove old symbols from defconfigs from Andrew Donnellan - Update obsolete comments in setup_32.c about entry conditions from Benjamin Herrenschmidt - Add comment explaining the purpose of setup_kdump_trampoline() from Benjamin Herrenschmidt - Merge the RELOCATABLE config entries for ppc32 and ppc64 from Kevin Hao - Remove RELOCATABLE_PPC32 from Kevin Hao - Fix .long's in tlb-radix.c to more meaningful from Balbir Singh Minor cleanups & fixes: - Andrew Donnellan, Anna-Maria Gleixner, Anton Blanchard, Benjamin Herrenschmidt, Bharata B Rao, Christophe Leroy, Colin Ian King, Geliang Tang, Greg Kurz, Madhavan Srinivasan, Michael Ellerman, Michael Ellerman, Stephen Rothwell, Stewart Smith. Freescale updates from Scott: - "Highlights include more 8xx optimizations, device tree updates, and MVME7100 support." PowerNV PCI hotplug from Gavin Shan: - PCI: Add pcibios_setup_bridge() - Override pcibios_setup_bridge() - Remove PCI_RESET_DELAY_US - Move pnv_pci_ioda_setup_opal_tce_kill() around - Increase PE# capacity - Allocate PE# in reverse order - Create PEs in pcibios_setup_bridge() - Setup PE for root bus - Extend PCI bridge resources - Make pnv_ioda_deconfigure_pe() visible - Dynamically release PE - Update bridge windows on PCI plug - Delay populating pdn - Support PCI slot ID - Use PCI slot reset infrastructure - Introduce pnv_pci_get_slot_id() - Functions to get/set PCI slot state - PCI/hotplug: PowerPC PowerNV PCI hotplug driver - Print correct PHB type names Power9 idle support from Shreyas B. Prabhu: - set power_save func after the idle states are initialized - Use PNV_THREAD_WINKLE macro while requesting for winkle - make hypervisor state restore a function - Rename idle_power7.S to idle_book3s.S - Rename reusable idle functions to hardware agnostic names - Make pnv_powersave_common more generic - abstraction for saving SPRs before entering deep idle states - Add platform support for stop instruction - cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES - cpuidle/powernv: cleanup cpuidle-powernv.c - cpuidle/powernv: Add support for POWER ISA v3 idle states - Use deepest stop state when cpu is offlined Power9 PMU from Madhavan Srinivasan: - factor out power8 pmu macros and defines - factor out power8 pmu functions - factor out power8 __init_pmu code - Add power9 event list macros for generic and cache events - Power9 PMU support - Export Power9 generic and cache events to sysfs Power9 preliminary interrupt & PCI support from Benjamin Herrenschmidt: - Add XICS emulation APIs - Move a few exception common handlers to make room - Add support for HV virtualization interrupts - Add mechanism to force a replay of interrupts - Add ICP OPAL backend - Discover IODA3 PHBs - pci: Remove obsolete SW invalidate - opal: Add real mode call wrappers - Rename TCE invalidation calls - Remove SWINV constants and obsolete TCE code - Rework accessing the TCE invalidate register - Fallback to OPAL for TCE invalidations - Use the device-tree to get available range of M64's - Check status of a PHB before using it - pci: Don't try to allocate resources that will be reassigned Other Power9: - Send SIGBUS on unaligned copy and paste from Chris Smart - Large Decrementer support from Oliver O'Halloran - Load Monitor Register Support from Jack Miller Performance improvements from Anton Blanchard: - Avoid load hit store in __giveup_fpu() and __giveup_altivec() - Avoid load hit store in setup_sigcontext() - Remove assembly versions of strcpy, strcat, strlen and strcmp - Align hot loops of some string functions eBPF JIT from Naveen N. Rao: - Fix/enhance 32-bit Load Immediate implementation - Optimize 64-bit Immediate loads - Introduce rotate immediate instructions - A few cleanups - Isolate classic BPF JIT specifics into a separate header - Implement JIT compiler for extended BPF Operator Panel driver from Suraj Jitindar Singh: - devicetree/bindings: Add binding for operator panel on FSP machines - Add inline function to get rc from an ASYNC_COMP opal_msg - Add driver for operator panel on FSP machines Sparse fixes from Daniel Axtens: - make some things static - Introduce asm-prototypes.h - Include headers containing prototypes - Use #ifdef __BIG_ENDIAN__ #else for REG_BYTE - kvm: Clarify __user annotations - Pass endianness to sparse - Make ppc_md.{halt, restart} __noreturn MM fixes & cleanups from Aneesh Kumar K.V: - radix: Update LPCR HR bit as per ISA - use _raw variant of page table accessors - Compile out radix related functions if RADIX_MMU is disabled - Clear top 16 bits of va only on older cpus - Print formation regarding the the MMU mode - hash: Update SDR1 size encoding as documented in ISA 3.0 - radix: Update PID switch sequence - radix: Update machine call back to support new HCALL. - radix: Add LPID based tlb flush helpers - radix: Add a kernel command line to disable radix - Cleanup LPCR defines Boot code consolidation from Benjamin Herrenschmidt: - Move epapr_paravirt_early_init() to early_init_devtree() - cell: Don't use flat device-tree after boot - ge_imp3a: Don't use the flat device-tree after boot - mpc85xx_ds: Don't use the flat device-tree after boot - mpc85xx_rdb: Don't use the flat device-tree after boot - Don't test for machine type in rtas_initialize() - Don't test for machine type in smp_setup_cpu_maps() - dt: Add of_device_compatible_match() - Factor do_feature_fixup calls - Move 64-bit feature fixup earlier - Move 64-bit memory reserves to setup_arch() - Use a cachable DART - Move FW feature probing out of pseries probe() - Put exception configuration in a common place - Remove early allocation of the SMU command buffer - Move MMU backend selection out of platform code - pasemi: Remove IOBMAP allocation from platform probe() - mm/hash: Don't use machine_is() early during boot - Don't test for machine type to detect HEA special case - pmac: Remove spurrious machine type test - Move hash table ops to a separate structure - Ensure that ppc_md is empty before probing for machine type - Move 64-bit probe_machine() to later in the boot process - Move 32-bit probe() machine to later in the boot process - Get rid of ppc_md.init_early() - Move the boot time info banner to a separate function - Move setting of {i,d}cache_bsize to initialize_cache_info() - Move the content of setup_system() to setup_arch() - Move cache info inits to a separate function - Re-order the call to smp_setup_cpu_maps() - Re-order setup_panic() - Make a few boot functions __init - Merge 32-bit and 64-bit setup_arch() Other new features: - tty/hvc: Use IRQF_SHARED for OPAL hvc consoles from Sam Mendoza-Jonas - tty/hvc: Use opal irqchip interface if available from Sam Mendoza-Jonas - powerpc: Add module autoloading based on CPU features from Alastair D'Silva - crypto: vmx - Convert to CPU feature based module autoloading from Alastair D'Silva - Wake up kopald polling thread before waiting for events from Benjamin Herrenschmidt - xmon: Dump ISA 2.06 SPRs from Michael Ellerman - xmon: Dump ISA 2.07 SPRs from Michael Ellerman - Add a parameter to disable 1TB segs from Oliver O'Halloran - powerpc/boot: Add OPAL console to epapr wrappers from Oliver O'Halloran - Assign fixed PHB number based on device-tree properties from Guilherme G. Piccoli - pseries: Add pseries hotplug workqueue from John Allen - pseries: Add support for hotplug interrupt source from John Allen - pseries: Use kernel hotplug queue for PowerVM hotplug events from John Allen - pseries: Move property cloning into its own routine from Nathan Fontenot - pseries: Dynamic add entires to associativity lookup array from Nathan Fontenot - pseries: Auto-online hotplugged memory from Nathan Fontenot - pseries: Remove call to memblock_add() from Nathan Fontenot cxl: - Add set and get private data to context struct from Michael Neuling - make base more explicitly non-modular from Paul Gortmaker - Use for_each_compatible_node() macro from Wei Yongjun - Frederic Barrat - Abstract the differences between the PSL and XSL - Make vPHB device node match adapter's - Philippe Bergheaud - Add mechanism for delivering AFU driver specific events - Ignore CAPI adapters misplaced in switched slots - Refine slice error debug messages - Andrew Donnellan - static-ify variables to fix sparse warnings - PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl - PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state - Add cxl_check_and_switch_mode() API to switch bi-modal cards - remove dead Kconfig options - fix potential NULL dereference in free_adapter() - Ian Munsie - Update process element after allocating interrupts - Add support for CAPP DMA mode - Fix allowing bogus AFU descriptors with 0 maximum processes - Fix allocating a minimum of 2 pages for the SPA - Fix bug where AFU disable operation had no effect - Workaround XSL bug that does not clear the RA bit after a reset - Fix NULL pointer dereference on kernel contexts with no AFU interrupts - powerpc/powernv: Split cxl code out into a separate file - Add cxl_slot_is_supported API - Enable bus mastering for devices using CAPP DMA mode - Move cxl_afu_get / cxl_afu_put to base - Allow a default context to be associated with an external pci_dev - Do not create vPHB if there are no AFU configuration records - powerpc/powernv: Add support for the cxl kernel api on the real phb - Add support for using the kernel API with a real PHB - Add kernel APIs to get & set the max irqs per context - Add preliminary workaround for CX4 interrupt limitation - Add support for interrupts on the Mellanox CX4 - Workaround PE=0 hardware limitation in Mellanox CX4 - powerpc/powernv: Fix pci-cxl.c build when CONFIG_MODULES=n selftests: - Test unaligned copy and paste from Chris Smart - Load Monitor Register Tests from Jack Miller - Cyril Bur - exec() with suspended transaction - Use signed long to read perf_event_paranoid - Fix usage message in context_switch - Fix generation of vector instructions/types in context_switch - Michael Ellerman - Use "Delta" rather than "Error" in normal output - Import Anton's mmap & futex micro benchmarks - Add a test for PROT_SAO" * tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (263 commits) powerpc/mm: Parenthesise IS_ENABLED() in if condition tty/hvc: Use opal irqchip interface if available tty/hvc: Use IRQF_SHARED for OPAL hvc consoles selftests/powerpc: exec() with suspended transaction powerpc: Improve comment explaining why we modify VRSAVE powerpc/mm: Drop unused externs for hpte_init_beat[_v3]() powerpc/mm: Rename hpte_init_lpar() and move the fallback to a header powerpc/mm: Fix build break when PPC_NATIVE=n crypto: vmx - Convert to CPU feature based module autoloading powerpc: Add module autoloading based on CPU features powerpc/powernv/ioda: Fix endianness when reading TCEs powerpc/mm: Add memory barrier in __hugepte_alloc() powerpc/modules: Never restore r2 for a mprofile-kernel style mcount() call powerpc/ftrace: Separate the heuristics for checking call sites powerpc: Merge 32-bit and 64-bit setup_arch() powerpc/64: Make a few boot functions __init powerpc: Re-order setup_panic() powerpc: Re-order the call to smp_setup_cpu_maps() powerpc/32: Move cache info inits to a separate function powerpc/64: Move the content of setup_system() to setup_arch() ... -
Michael Ellerman authored
On a system with sparse node ids, eg. a powerpc system with 4 nodes numbered like so: node 0: [mem 0x0000000000000000-0x00000007ffffffff] node 1: [mem 0x0000000800000000-0x0000000fffffffff] node 16: [mem 0x0000001000000000-0x00000017ffffffff] node 17: [mem 0x0000001800000000-0x0000001fffffffff] The code in rand_initialize() will allocate 4 pointers for the pool array, and initialise them correctly. However when go to use the pool, in eg. extract_crng(), we use the numa_node_id() to index into the array. For the higher numbered node ids this leads to random memory corruption, depending on what was kmalloc'ed adjacent to the pool array. Fix it by using nr_node_ids to size the pool array. Fixes: 1e7f583a ("random: make /dev/urandom scalable for silly userspace programs") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 30 Jul, 2016 2 commits
-
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client updates from Trond Myklebust: "Highlights include: Stable bugfixes: - nfs: don't create zero-length requests - several LAYOUTGET bugfixes Features: - several performance related features - more aggressive caching when we can rely on close-to-open cache consistency - remove serialisation of O_DIRECT reads and writes - optimise several code paths to not flush to disk unnecessarily. However allow for the idiosyncracies of pNFS for those layout types that need to issue a LAYOUTCOMMIT before the metadata can be updated on the server. - SUNRPC updates to the client data receive path - pNFS/SCSI support RH/Fedora dm-mpath device nodes - pNFS files/flexfiles can now use unprivileged ports when the generic NFS mount options allow it. Bugfixes: - Don't use RDMA direct data placement together with data integrity or privacy security flavours - Remove the RDMA ALLPHYSICAL memory registration mode as it has potential security holes. - Several layout recall fixes to improve NFSv4.1 protocol compliance. - Fix an Oops in the pNFS files and flexfiles connection setup to the DS - Allow retry of operations that used a returned delegation stateid - Don't mark the inode as revalidated if a LAYOUTCOMMIT is outstanding - Fix writeback races in nfs4_copy_range() and nfs42_proc_deallocate()" * tag 'nfs-for-4.8-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (104 commits) pNFS: Actively set attributes as invalid if LAYOUTCOMMIT is outstanding NFSv4: Clean up lookup of SECINFO_NO_NAME NFSv4.2: Fix warning "variable ‘stateids’ set but not used" NFSv4: Fix warning "no previous prototype for ‘nfs4_listxattr’" SUNRPC: Fix a compiler warning in fs/nfs/clnt.c pNFS: Remove redundant smp_mb() from pnfs_init_lseg() pNFS: Cleanup - do layout segment initialisation in one place pNFS: Remove redundant stateid invalidation pNFS: Remove redundant pnfs_mark_layout_returned_if_empty() pNFS: Clear the layout metadata if the server changed the layout stateid pNFS: Cleanup - don't open code pnfs_mark_layout_stateid_invalid() NFS: pnfs_mark_matching_lsegs_return() should match the layout sequence id pNFS: Do not set plh_return_seq for non-callback related layoutreturns pNFS: Ensure layoutreturn acts as a completion for layout callbacks pNFS: Fix CB_LAYOUTRECALL stateid verification pNFS: Always update the layout barrier seqid on LAYOUTGET pNFS: Always update the layout stateid if NFS_LAYOUT_INVALID_STID is set pNFS: Clear the layout return tracking on layout reinitialisation pNFS: LAYOUTRETURN should only update the stateid if the layout is valid nfs: don't create zero-length requests ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 microcode updates from Thomas Gleixner: - more work to make the microcode loader robust - a fix for the micro code load precedence - fixes for initrd loading with randomized memory - less printk noise on SMP machines * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm, x86/microcode: Add __PAGE_OFFSET_BASE define on 32-bit x86/microcode/intel: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y x86/microcode: Remove unused symbol exports x86/microcode/intel: Do not issue microcode updates messages on each CPU Documentation/microcode: Document some aspects for more clarity x86/microcode/AMD: Make amd_ucode_patch[] static x86/microcode/intel: Unexport save_mc_for_early() x86/microcode/intel: Rename load_microcode_early() to find_microcode_patch() x86/microcode: Propagate save_microcode_in_initrd() retval x86/microcode: Get rid of find_cpio_data()'s dummy offset arg lib/cpio: Make find_cpio_data()'s offset arg optional x86/microcode: Fix suspend to RAM with builtin microcode x86/microcode: Fix loading precedence
-
