- 07 Oct, 2019 1 commit
-
-
Hans de Goede authored
We can have 2 dcpm-s with the same backend and frontend name (capture + playback pair), this causes the following debugfs error on Intel Bay Trail systems: [ 298.969049] debugfs: Directory 'SSP2-Codec' with parent 'Baytrail Audio Port' already present! This commit adds a ":playback" or ":capture" postfix to the debugfs dir name fixing this. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20191005212202.5206-1-hdegoede@redhat.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 03 Oct, 2019 1 commit
-
-
Robin Murphy authored
If rockchip_pcm_platform_register() fails, e.g. upon deferring to wait for an absent DMA channel, we return without disabling RPM, which makes subsequent re-probe attempts scream with errors about the unbalanced enable. Don't do that. Fixes: ebb75c0b ("ASoC: rockchip: i2s: Adjust devm usage") Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/bcb12a849a05437fb18372bc7536c649b94bdf07.1570029862.git.robin.murphy@arm.comSigned-off-by:
-
- 02 Oct, 2019 1 commit
-
-
Stuart Henderson authored
User space always expects to be able to read ALSA controls, so ensure no kcontrols are generated without an appropriate READ flag. In the case of a read of such a control zeros will be returned. Signed-off-by:
Stuart Henderson <stuarth@opensource.cirrus.com> Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20191002084240.21589-1-ckeepax@opensource.cirrus.comSigned-off-by:
-
- 01 Oct, 2019 13 commits
-
-
Jaska Uimonen authored
When removing sof module the support_button_press function will oops because hp_jack pointer is not checked for NULL. So add a check to fix this. Signed-off-by:
Jaska Uimonen <jaska.uimonen@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190927201408.925-2-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Jaska Uimonen authored
When removing sof module the rt5682 jack handler will oops if jack detection is not disabled. So add remove function, which disables the jack detection. Signed-off-by:
-
Jaska Uimonen authored
Implement NULL handler in set_jack function to disable irq's. Signed-off-by:
-
Bard Liao authored
dmic map can only be added when dmic dai link is present. Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
-
Ranjani Sridharan authored
There is a known issue on some Intel platforms which causes pause/release to run into xrun's during capture usecases. The suggested workaround to address the issue is to disable the entry of lower power L1 state in the physical DMI link when there is a capture stream open. Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
-
Liam Girdwood authored
FW mailbox offset was not set before use and HDR size was not validated. Fix this. Signed-off-by:
Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by:
-
Kai Vehmanen authored
The "snd_pcm_substream" handle was not initialized properly in hda-loader.c for firmware load. When the HDA DMAs were used to load the firmware, the interrupts related to firmware load also triggered calls to snd_sof_pcm_period_elapsed() on a non-existent ALSA PCM stream. This caused runtime kernel warnings from pcm_lib.c:snd_pcm_period_elapsed(). Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
-
Pan Xiuli authored
The old STOP sequence is: 1. stop DMA 2. send STOP ipc If delay happen before the steps 1 and 2, the DMA buffer will be empty in short time and cause pipeline xrun then stop the pipeline. Then the step 2 ipc stop will return error as pipeline is already stopped. Suggested change to avoid the issue is to switch the order of steps 1 and 2 for the stop sequence. Signed-off-by:
Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by:
-
Kai Vehmanen authored
Fix a bug in sof_pcm_hw_free() where some cleanup actions were skipped if STREAM_PCM_FREE IPC was already successfully sent to DSP when the stream was stopped or suspended. This is incorrect as hw_free should clean up also other resources, including pcm lib page allocations, period elapsed work queue and call to platform hw_free. Fixes: c29d96c3b9b4 ("ASoC: SOF: reset DMA state in prepare") Signed-off-by: -
Keyon Jie authored
We are using sof_parse_word_tokens() to parse tokens with bool/byte/short/word tuple types, here add the missing check, to fix the parsing failure at byte/bool tuple types. Signed-off-by:
Keyon Jie <yang.jie@linux.intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
When we fail to boot the firmware, we encounter a kernel oops in hda_dsp_get_registers(), which is called conditionally in hda_dsp_dump() when the sdev_>boot_complete flag is set. Setting this flag _after_ dumping the data fixes the issue and does not change the programming flow. Signed-off-by:
-
Li Xu authored
Fix potential NULL pointer dereference for alg_region in wm_adsp_buffer_parse_legacy. In practice this can never happen as loading the firmware should have failed at the wm_adsp2_setup_algs stage, however probably better for the code to be robust against future changes and this is more helpful for static analysis. Signed-off-by:
Li Xu <li.xu@cirrus.com> Signed-off-by:
-
Sathyanarayana Nujella authored
Below Oops is caused in a system which uses ACPI instead of device node: of_get_named_gpiod_flags: can't parse 'maxim,reset-gpio' property of node '(null)[0]' BUG: kernel NULL pointer dereference, address: 0000000000000010 This patch avoids NULL pointer deferencing by adding a check before parsing and initializes to make reset-gpio pin as invalid. Signed-off-by:
Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by:
Jairaj Arava <jairaj.arava@intel.com> Link: https://lore.kernel.org/r/1569702150-11976-1-git-send-email-sathyanarayana.nujella@intel.comSigned-off-by:
-
- 26 Sep, 2019 1 commit
-
-
Dan Carpenter authored
The "template.id" variable is an enum and in this context GCC will treat it as an unsigned int so it can never be less than zero. Fixes: 8a978234 ("ASoC: topology: Add topology core") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20190925110624.GR3264@mwandaSigned-off-by:
-
- 23 Sep, 2019 3 commits
-
-
Dan Carpenter authored
There were a couple places where the return value wasn't assigned so the error handling wouldn't trigger. Fixes: 5c0769af ("ASoC: soc-dai: add snd_soc_dai_bespoke_trigger()") Fixes: 95aef355 ("ASoC: soc-dai: add snd_soc_dai_trigger()") Signed-off-by:
-
Sylwester Nawrocki authored
In case of WM1811 device there are currently being registered controls referring to registers not existing on that device. It has been noticed when getting values of "AIF1ADC2 Volume", "AIF1DAC2 Volume" controls was failing during ALSA state restoring at boot time: "amixer: Mixer hw:0 load error: Device or resource busy" Reading some registers through I2C was failing with EBUSY error and indeed these registers were not available according to the datasheet. To fix this controls not available on WM1811 are moved to a separate array and registered only for WM8994 and WM8958. There are some further differences between WM8994 and WM1811, e.g. registers 603h, 604h, 605h, which are not covered in this patch. Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20190920130218.32690-2-s.nawrocki@samsung.comSigned-off-by:
-
Sylwester Nawrocki authored
Ensure there is no OF node references kept when the driver is removed/unbound. Reviewed-by:
-
- 20 Sep, 2019 3 commits
-
-
Arnd Bergmann authored
SND_SOC_DM365_VOICE_CODEC is a 'bool' option in a choice statement, meaning it cannot be set to =m, but it selects two other drivers that we may want to be loadable modules after all: WARNING: unmet direct dependencies detected for SND_SOC_CQ0093VC Depends on [m]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] Selected by [y]: - SND_SOC_DM365_VOICE_CODEC [=y] && <choice> Selected by [m]: - SND_SOC_ALL_CODECS [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMPILE_TEST [=y] Add an intermediate symbol that sets SND_SOC_CQ0093VC and MFD_DAVINCI_VOICECODEC to =m if SND_SOC=m. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190920075046.3210393-1-arnd@arndb.deSigned-off-by:
-
Peter Ujfalusi authored
24 bits is supported in all modes and 16 bit only when the codec is slave and the DAI is set to RIGHT_J. Remove the unsupported sample format. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20190919071652.31724-1-peter.ujfalusi@ti.comSigned-off-by:
-
Bard liao authored
commit a0a4bf57 ("ASoC: core: delete component->card_list in soc_remove_component only") was trying to fix a kernel oops when list_del was called twice without re-init the list. Use list_del_init() can solve it, too. Besides, it will be more readable if we cleanup all component related resource at soc_cleanup_component(). Suggested-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
- 18 Sep, 2019 2 commits
-
-
Kuninori Morimoto authored
SSI need to use rsnd_channel_normalization() for TDM-split mode, thus, channel check need to do after that. Signed-off-by:
-
Gregory CLEMENT authored
A potential bug was reported in the email "[BUG] atmel_ssc_dai: a possible sleep-in-atomic bug in atmel_ssc_shutdown"[1] Indeed in the function atmel_ssc_shutdown() free_irq() was called in a critical section protected by spinlock. However this spinlock is only used in atmel_ssc_shutdown() and atmel_ssc_startup() functions. After further analysis, it occurred that the call to these function are already protected by mutex used on the calling functions. Then we can remove the spinlock which will fix this bug as a side effect. Thanks to this patch the following message disappears: "BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909" [1]: https://www.spinics.net/lists/alsa-devel/msg71286.htmlReviewed-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20190918100344.23629-1-gregory.clement@bootlin.comSigned-off-by:
-
- 17 Sep, 2019 2 commits
-
-
Bard Liao authored
We add component->card_list in the end of soc_probe_component(). In other words, component->card_list will not be added if there is an error in the soc_probe_component() function. So we can't delete component->card_list in the error handling of soc_probe_component(). Fixes: 22d14231 ("ASoC: soc-core: add soc_cleanup_component()") Signed-off-by:
-
Mihai Serban authored
EDMA requires the period size to be multiple of maxburst. Otherwise the remaining bytes are not transferred and thus noise is produced. We can handle this issue by adding a constraint on SNDRV_PCM_HW_PARAM_PERIOD_SIZE to be multiple of tx/rx maxburst value. Signed-off-by:
Mihai Serban <mihai.serban@nxp.com> Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/20190913192807.8423-2-daniel.baluta@nxp.comSigned-off-by:
-
- 15 Sep, 2019 1 commit
-
-
Saiyam Doshi authored
Remove excess semicolon after closing parenthesis. Signed-off-by:
Saiyam Doshi <saiyamdoshi.in@gmail.com> Link: https://lore.kernel.org/r/20190914031133.GA28447@SDSigned-off-by:
-
- 13 Sep, 2019 1 commit
-
-
Viorel Suman authored
This is to allow machine drivers to set a certain bitclk rate which might not be exactly rate * frame size. Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by:
Viorel Suman <viorel.suman@nxp.com> Signed-off-by:
-
- 11 Sep, 2019 1 commit
-
-
Saiyam Doshi authored
All these functions declares and initializes variable ret with '0' and without modifying 'ret' variable, it is returned. This patch removes this redundancy and returns '0' directly. Signed-off-by:
-
- 09 Sep, 2019 10 commits
-
-
Cheng-Yi Chiang authored
Add an op in hdmi_codec_ops so codec driver can register callback function to handle plug event. Driver in DRM can use this callback function to report connector status. Signed-off-by:
Cheng-Yi Chiang <cychiang@chromium.org> Link: https://lore.kernel.org/r/20190717083327.47646-2-cychiang@chromium.orgReviewed-by:
Tzung-Bi Shih <tzungbi@google.com> Signed-off-by:
-
Ben Zhang authored
Instead of clearing RT5677_PWR_ANLG2 (MX-64h) to 0 at SND_SOC_BIAS_OFF, we only clear the RT5677_PWR_CORE bit which is set at SND_SOC_BIAS_PREPARE. MICBIAS control bits are left unchanged. This fixed the bug where if MICBIAS1 widget is forced on, MICBIAS control bits will be cleared at suspend and never turned back on again, since DAPM thinks the widget is always on. Signed-off-by:
Ben Zhang <benzh@chromium.org> Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20190906194636.217881-3-cujomalainey@chromium.orgSigned-off-by:
-
Curtis Malainey authored
In order to simplify understanding what register values are being written to the codec for debugging more advanced features (such as hotwording) it is best to remove magic numbers Signed-off-by:
-
Kuninori Morimoto authored
Current soc_unbind_aux_dev() implementation is very half, thus it is very unreadable. for_each_comp_order(order) { for_each_card_auxs_safe(card, comp, _comp) { (1) if (comp->driver->remove_order == order) { ... => soc_unbind_aux_dev(comp); } } soc_unbind_aux_dev() itself is not related to remove_order (1). And, it is called from soc_remove_aux_devices(), even though its paired function soc_bind_aux_dev() is called from snd_soc_instantiate_card(). It is very unbalance, and very difficult to understand. This patch do 1) update soc_bind_aux_dev() to self contained 2) call it from soc_cleanup_card_resources() to make up balance Signed-off-by: -
Kuninori Morimoto authored
It is easy to read code if it is cleanly using paired function/naming, like start <-> stop, register <-> unregister, etc, etc. But, current ALSA SoC code is very random, unbalance, not paired, etc. It is easy to create bug at the such code, and it will be difficult to debug. soc-core.c has soc_bind_aux_dev(), but, there is no its paired soc_unbind_aux_dev(). This patch adds soc_unbind_aux_dev(). Signed-off-by:
-
Kuninori Morimoto authored
Current soc_bind_aux_dev() implementation is very half, thus it is very unreadable. for_each_card_pre_auxs(xxx) { => ret = soc_bind_aux_dev(xxx); ... } This patch does all for_each_xxx() under soc_bind_aux_dev(), and makes it to self contained. Signed-off-by: -
Kuninori Morimoto authored
It is easy to read code if it is cleanly using paired function/naming, like start <-> stop, register <-> unregister, etc, etc. But, current ALSA SoC code is very random, unbalance, not paired, etc. It is easy to create bug at the such code, and it will be difficult to debug. This patch moves soc_probe_link_dais() next to soc_remove_link_dais() which is paired function. Signed-off-by:
-
Kuninori Morimoto authored
Current soc_probe_link_dais() implementation is very half, thus it is very difficult to read. for_each_comp_order(xxx) { for_each_card_rtds(xxx) => soc_probe_link_dais(xxx); } This patch does all for_each_xxx() under soc_probe_link_dais(), and makes it to self contained. Signed-off-by: -
Kuninori Morimoto authored
Current soc_probe_link_dais() (1) is called under probe_order (2), and it will initialize dai_link related settings at *Last* turn (3)(B). It is very complex code. static int soc_probe_link_dais(..., order) { (A) /* probe DAIs here */ ... (3) if (order != SND_SOC_COMP_ORDER_LAST) return 0; (B) /* initialize dai_link related settings */ ... } static int snd_soc_instantiate_card(...) { ... (2) for_each_comp_order(order) { for_each_card_rtds(...) { (1) ret = soc_probe_link_dais(..., order); } } } This patch separes soc_probe_link_dais() into "DAI probe" portion (A), and dai_link settings portion (B). The later is named as soc_link_init() by this patch. Signed-off-by: -
Kuninori Morimoto authored
It is easy to read code if it is cleanly using paired function/naming, like start <-> stop, register <-> unregister, etc, etc. But, current ALSA SoC code is very random, unbalance, not paired, etc. It is easy to create bug at the such code, and it will be difficult to debug. This patch moves soc_probe_dai() next to soc_remove_dai() which is paired function. Signed-off-by:
-
