- 16 May, 2012 3 commits
-
-
Gustavo Padovan authored
When building fragmented skb's skb->len keeps track of the size of head plus all fragments combined, however when queueing the skb for sending we need to report the head size instead of the total size, so we just set skb->len to skb_headlen(). This bug appeared when implementing MSG_MORE support for L2CAP sockets, it never showed up before because l2cap_skbuff_fromiovec() never accounted skb size correctly. A following patch will fix this. Signed-off-by:
Gustavo Padovan <gustavo@padovan.org> Reviewed-by:
Mat Martineau <mathewm@codeaurora.org> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com>
-
Gustavo Padovan authored
If alloc() fails we let the frags linked list with garbage value (the err ptr value) in its last element. Reported-by:
-
-
- 15 May, 2012 1 commit
-
-
Mat Martineau authored
Commit 105bdf9e introduced a regression in L2CAP streaming mode due to rearranged initialization code that is shared between ERTM and streaming mode. This change makes sure the transmit queue is initialized in both modes. Signed-off-by:
Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by:
-
- 14 May, 2012 4 commits
-
-
Mat Martineau authored
Commit 94122bbe introduced a problem where tx_send_head was not set to point to the first skb in the ERTM transmit queue, which stalled data transmission. This change sets that pointer when transmission is not already in progress. Reported-by:
-
Johan Hedberg authored
The mgmt_ev_device_connected signal must be sent before any event indications happen for sockets associated with the connection. Otherwise e.g. device authorization for the sockets will fail with ENOTCONN as user space things that there is no baseband link. This patch fixes the issue by ensuring that the device_connected event if sent (if it hasn't been so already) as soon as the first ACL data packet arrives from the remote device. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Gustavo Padovan authored
It fixes L2CAP socket based security level elevation during a connection. The HID profile needs this (for keyboards) and it is the only way to achieve the security level elevation when using the management interface to talk to the kernel (hence the management enabling patch being the one that exposes this issue). It enables the userspace a security level change when the socket is already connected and create a way to notify the socket the result of the request. At the moment of the request the socket is made non writable, if the request fails the connections closes, otherwise the socket is made writable again, POLL_OUT is emmited. Signed-off-by:
-
Larry Finger authored
In commit b0302aba, the rtlwifi family of drivers was converted to use asynchronous firmware loading. Unfortumately, the implementation was racy, and the ieee80211 routines could be started before rtl_init_core() was called to setup the data. This patch fixes the bug noted in https://bugzilla.kernel.org/show_bug.cgi?id=43187. Reported-by:
Joshua Roys <Joshua.Roys@gtri.gatech.edu> Tested-by:
Neptune Ning <frostyplanet@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [3.3] Signed-off-by:
-
- 09 May, 2012 32 commits
-
-
Cristian Chilipirea authored
Fixed some checkpatch warnings in mgmt.c. Signed-off-by:
Cristian Chilipirea <cristian.chilipirea@gmail.com> Signed-off-by:
-
Eldad Zack authored
The dot1q ethertype number (0x8100) is embedded in the code, although it is already defined in included headers. Signed-off-by:
Eldad Zack <eldad@fogrefinery.com> Signed-off-by:
-
Mat Martineau authored
Use more common code for ERTM and streaming mode segmentation and transmission, and begin using skb control block data for delaying extended or enhanced header generation until just before the packet is transmitted. This code is also better suited for resegmentation, which is needed when L2CAP links are reconfigured after an AMP channel move. Signed-off-by:
Ulisses Furquim <ulisses@profusion.mobi> Signed-off-by:
-
Andrei Emeltchenko authored
Remove magic number unneeded calculation since hlen = L2CAP_HDR_SIZE + L2CAP_PSMLEN_SIZE Signed-off-by:
-
Gustavo Padovan authored
hlen has a fixed size of L2CAP_HDR_SIZE, use this instead. Signed-off-by:
-
Marcel Holtmann authored
The Bluetooth Low Energy support so far was disabled by default via a module parameter. With this change the module parameter will be removed and Low Energy is enabled by default. Signed-off-by:
-
Syam Sidhardhan authored
No one is using hci_le_ltk_neg_reply() in bluetooth subsystem. Signed-off-by:
Syam Sidhardhan <s.syam@samsung.com> Signed-off-by:
-
Amitkumar Karwar authored
Host sleep is activated using already configured host sleep parameters in suspend handler and it is cancelled in resume handler. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Acked-by:
-
Gustavo Padovan authored
hlen - L2CAP_HDR_SIZE = 0, so we don't need to add them in the calculation. Signed-off-by:
-
Syam Sidhardhan authored
In this API, we were using sizeof operator for an array given as function argument, which is invalid. However this API is not used anywhere. Signed-off-by:
-
Mat Martineau authored
Adding Code Aurora Forum copyright information due to significant additions of code. Acked-by:
-
Mat Martineau authored
L2CAP sockets contain a pointer to l2cap_chan that needs to be reference counted in order to prevent a possible dangling pointer when the channel is freed. There were a few other cases where an l2cap_chan pointer on the stack was dereferenced after a call to l2cap_chan_del. Those pointers are also now reference counted. Signed-off-by:
-
Mat Martineau authored
l2cap_get_chan_by_ident was not used, but didn't generate a compiler warning because it was an inline function. Signed-off-by:
-
Mat Martineau authored
Structure members used by ERTM or streaming mode need to be initialized when an ERTM or streaming mode link is configured. Some duplicate code is also eliminated by moving in to the ERTM init function. Signed-off-by:
-
Mat Martineau authored
Moving these functions simplifies future patches by eliminating forward declarations, makes future patches easier to review, and better preserves 'git blame' information. Signed-off-by:
-
Mat Martineau authored
These values are now in the nested l2cap_ctrl struct. Signed-off-by:
-
Mat Martineau authored
Instead of using modular division, the offset can be calculated using only addition and subtraction. The previous calculation did not work as intended and was more difficult to understand, involving unsigned integer underflow and a check for a negative value where one was not possible. Signed-off-by:
-
Amitkumar Karwar authored
Currently debugfs commands "hscfgcmd" and "gpiogap" are provided for host sleep configuration. But if user doesn't configure host sleep parameters using these commands, host sleep activation is failed during suspend (support for suspend and resume handlers is added in next patch). Default host sleep configuration is done during driver initialisation in this patch. Signed-off-by:
-
Andre Guedes authored
User-space pass the remote device address type to kernel through struct sockaddr_l2 what makes the advertising useless. This patch removes all advertising cache code. Signed-off-by:
Andre Guedes <andre.guedes@openbossa.org> Acked-by:
-
Andre Guedes authored
In order to establish a LE connection we need the address type information. User-space already pass this information to kernel through struct sockaddr_l2. This patch adds the dst_type parameter to l2cap_chan_connect so we are able to pass the address type info from user-space down to hci_conn layer. Signed-off-by:
-
Andre Guedes authored
This patch adds the dst_type parameter to hci_connect function. Instead of searching the address type in advertising cache, we use the dst_type parameter to establish LE connections. The dst_type is ignored for BR/EDR connection establishment. Signed-off-by:
-
Andre Guedes authored
This patch moves the helper function bdaddr_to_le to hci_core, so it can be used in mgmt.c and hci_conn.c. Signed-off-by:
-
Andre Guedes authored
Since address type macros are not only related to Management Interface anymore, it makes sense to rename the helper function mgmt_to_le to bdaddr_to_le. Signed-off-by:
-
Andre Guedes authored
This patch adds the address type info to struct sockaddr_l2 so user-space can inform the remote device address type required to establish LE connections. Soon, instead of looking the advertising cache up to discover the address type, we'll use this address type info to establish LE connections. Signed-off-by:
-
Andre Guedes authored
Since address type macros are not only related to Management Interface anymore, it makes sense to rename the helper function link_to_mgmt to link_to_bdaddr. Signed-off-by:
-
Andre Guedes authored
This patch moves address type macros to bluetooth.h since they will be used by management interface and Bluetooth socket interface. It also replaces the macro prefix MGMT_ADDR_ by BDADDR_. Signed-off-by:
-
Andrei Emeltchenko authored
Signed-off-by:
-
Andre Guedes authored
This patch removes unneeded variable assignments in hci_connect. 'sec_level' is already assigned to BT_SECURITY_LOW in hci_le_connect and 'pending_sec_level' and 'auth_type' are assigned right after if statement. Signed-off-by:
-
Vinicius Costa Gomes authored
As most LE devices leave advertising mode when they enter the connected state, we may want to "pass" that connection to other users. The first user will be the pairing procedure, the connection is established without an associated socket, after the pairing is complete, userspace may want to discover via GATT what services the newly bonded device has. If userspace establishes the connection while the timeout still hasn't expired, the connection will be re-used. Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Tested-by:
João Paulo Rechi Vita <jprvita@openbossa.org> Signed-off-by:
-
Ido Yariv authored
The cid or psm and the source address might not be enough to uniquely identify a global channel, especially when the source address is our own. For instance, when trying to communicate with two LE devices in master mode, data received from the both devices is sent to the same socket. Fix this by taking the destination address into account when choosing the socket. Signed-off-by:
Ido Yariv <ido@wizery.com> Signed-off-by:
Arik Nemtsov <arik@wizery.com> Tested-by:
-
David Herrmann authored
We allocate memory with kzalloc() so there is no need to call memset(..., 0, ...) or similar. Signed-off-by:
David Herrmann <dh.herrmann@googlemail.com> Signed-off-by:
-
David Herrmann authored
We currently initialize locks, lists, works, etc. in hci_register_dev() (hci_alloc_dev() was added later) which is bogus because an hdev is in an invalid state if it is not registered. This patch moves all memory initialization to hci_alloc_dev(). Device registering and registration of sub-modules is still left in hci_register_dev() as it belongs there. The benefit is (despite cleaning up the code-base) we can now always be sure that an hdev is a valid object and can be locked and worked on even though it may not be registered. This patch also reorders the initialization to be easier to understand. First the memory is initialized, then all generic structures and as last step the sub-init functions are called. This guarantees that all dependencies are initialized in the right order and makes it also easier to find a specific line. We previously initialized it in the same order as the "struct hci_dev" is declared which seems pretty random. Signed-off-by:
-
