We now have many repetitive greps over the kernel config.  Refactor
them into functions.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

s390 now only supports 64-bit configurations.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

We currently use dpkg --print-architecture, which reports the
architecture of the build machine.  We can make a better guess
than this by asking dpkg-architecture what the host architecture,
i.e. the default architecture for building packages, is.  This is
sensitive to environment variables such as CC and DEB_HOST_ARCH,
which should already be set in a cross-build environment.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

If KBUILD_DEBARCH is set then we will not use the result of
architecture detection, and we may also warn unnecessarily.
Move the check for KBUILD_DEBARCH further up to avoid this.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, filechk unconditionally opens the first prerequisite and
redirects it as the stdin of a filechk_* rule.  Hence, every target
using $(call filechk,...) must list something as the first prerequisite
even if it is unneeded.

'< $<' is actually unneeded in most cases.  Each rule can explicitly
adds it if necessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The filechk_offsets in arch/arm/mach-at91/Makefile is never
used because it is always overridden by the equivalent one in
scripts/Makefile.lib
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Users of if_changed could easily feel invited to use it to divide a
recipe into parts like:

a: prereq FORCE
	$(call if_changed,do_a)
	$(call if_changed,do_b)

But this is problematic, because if_changed should not be used more
than once per target: in the above example, if_changed stores the
command-line of the given command in .a.cmd and when a is up-to-date
with respect to prereq, the file .a.cmd contains the command-line for
the last command executed, i.e. do_b.

When the recipe is then executed again, without any change of
prerequisites, the command-line check for do_a will fail, do_a will be
executed and stored in .a.cmd.  The next check, however, will still see
the old content (the file isn't re-read) and if_changed will skip
do_b, because the command-line test will not recognize a change.  On
the next execution of the recipe the roles will flip: do_a is OK but
do_b not and it will be executed.  And so on...
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Make 'make tar-pkg' work on arm64.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

ARCH=vax isn't in mainline; it can be added back if/when it shows up.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Put $(LDFLAGS_$(@F)) into ld_flags so that $(LDFLAGS_pcap.o) and
$(LDFLAGS_vde.o) in arch/um/drivers/Makefile are absorbed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>

$(LDFLAGS) $(ldflags-y) is equivalent to $(ld_flags).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>

Since commit ce99d0bf ("kbuild: clear LDFLAGS in the top Makefile"),
the top-level Makefile caters to this.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>

This is already exported by the top-level Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>

Now that we have the rename in place, reuse the HOST*FLAGS options as
something that can be set from the command line and included with the
rest of the flags.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

In preparation for enabling command line LDLIBS, re-name HOST_LOADLIBES
to KBUILD_HOSTLDLIBS as the internal use only flags. Also rename
existing usage to HOSTLDLIBS for consistency. This should not have any
visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

In preparation for enabling command line LDFLAGS, re-name HOSTLDFLAGS
to KBUILD_HOSTLDFLAGS as the internal use only flags. This should not
have any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

In preparation for enabling command line CXXFLAGS, re-name HOSTCXXFLAGS
to KBUILD_HOSTCXXFLAGS as the internal use only flags. This should not
have any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to
KBUILD_HOSTCFLAGS as the internal use only flags. This should not have
any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The vDSO needs to have a unique build id in a similar manner
to the kernel and modules. Use the build salt macro.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The vDSO needs to have a unique build id in a similar manner
to the kernel and modules. Use the build salt macro.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The vDSO needs to have a unique build id in a similar manner
to the kernel and modules. Use the build salt macro.
Acked-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

In Fedora, the debug information is packaged separately (foo-debuginfo) and
can be installed separately. There's been a long standing issue where only
one version of a debuginfo info package can be installed at a time. There's
been an effort for Fedora for parallel debuginfo to rectify this problem.

Part of the requirement to allow parallel debuginfo to work is that build ids
are unique between builds. The existing upstream rpm implementation ensures
this by re-calculating the build-id using the version and release as a
seed. This doesn't work 100% for the kernel because of the vDSO which is
its own binary and doesn't get updated when embedded.

Fix this by adding some data in an ELF note for both the kernel and modules.
The data is controlled via a Kconfig option so distributions can set it
to an appropriate value to ensure uniqueness between builds.
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Verify that 'depmod' ($DEPMOD) is installed.
This is a partial revert of commit 620c231c
("kbuild: do not check for ancient modutils tools").

Also update Documentation/process/changes.rst to refer to
kmod instead of module-init-tools.

Fixes kernel bugzilla #198965:
https://bugzilla.kernel.org/show_bug.cgi?id=198965Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Chih-Wei Huang <cwhuang@linux.org.tw>
Cc: stable@vger.kernel.org # any kernel since 2012
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Commit 8370edea ("bin2c: move bin2c in scripts/basic") moved bin2c
to the scripts/basic/ directory, incorrectly stating "Kexec wants to
use bin2c and it wants to use it really early in the build process.
See arch/x86/purgatory/ code in later patches."

Commit bdab125c ("Revert "kexec/purgatory: Add clean-up for
purgatory directory"") and commit d6605b6b ("x86/build: Remove
unnecessary preparation for purgatory") removed the redundant
purgatory build magic entirely.

That means that the move of bin2c was unnecessary in the first place.

fixdep is the only host program that deserves to sit in the
scripts/basic/ directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

atomic_as_refcounter.cocci script allows detecting
cases when refcount_t type and API should be used
instead of atomic_t.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Pull ARM SoC fixes from Olof Johansson:

 - A fix for OMAP5 and DRA7 to make the branch predictor hardening
   settings take proper effect on secondary cores

 - Disable USB OTG on am3517 since current driver isn't working

 - Fix thermal sensor register settings on Armada 38x

 - Fix suspend/resume IRQs on pxa3xx

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: am3517.dtsi:  Disable reference to OMAP3 OTG controller
  ARM: DRA7/OMAP5: Enable ACTLR[0] (Enable invalidates of BTB) for secondary cores
  ARM: pxa: irq: fix handling of ICMR registers in suspend/resume
  ARM: dts: armada-38x: use the new thermal binding

Pull RTC fixes from Alexandre Belloni:
 "Two fixes for 4.18:

   - an important core fix for RTCs using the core offsetting only one
     driver is affected

   - a fix for the error path of mrst"

* tag 'rtc-4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: fix alarm read and set offset
  rtc: mrst: fix error code in probe()

Merge tag 'omap-for-v4.18/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Two omap fixes for v4.18-rc cycle

Turns out the recent patches for ARM branch predictor hardening are
not working on omap5 and dra7 as planned because the secondary CPU
is parked to the bootrom code. We can't configure it in the bootloader.
So we must enable invalidates of BTB for omap5 and dra7 secondary
core in the kernel.

And there's a fix for reserved register access for am3517. The
usb otg module on am3517 is not the same as for other omap3.

* tag 'omap-for-v4.18/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am3517.dtsi:  Disable reference to OMAP3 OTG controller
  ARM: DRA7/OMAP5: Enable ACTLR[0] (Enable invalidates of BTB) for secondary cores
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu fixes for 4.18 (part 1)

Use the new thermal binding on Armada 38x allowing to use a driver fix
which is already part of the kernel.

* tag 'mvebu-fixes-4.18-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: armada-38x: use the new thermal binding
Signed-off-by: Olof Johansson <olof@lixom.net>

This is the fixes set for v4.18 cycle.

This is a fix for suspending all pxa3xx platforms, where high
number interrupts are not reenabled.

* tag 'pxa-fixes-4.18' of https://github.com/rjarzmik/linux:
  ARM: pxa: irq: fix handling of ICMR registers in suspend/resume
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull xen fixes from Juergen Gross:
 "Two related fixes for a boot failure of Xen PV guests"

* tag 'for-linus-4.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: setup pv irq ops vector earlier
  xen: remove global bit from __default_kernel_pte_mask for pv guests

Pull block fix from Jens Axboe:
 "Just a single regression fix (from 4.17) for bsg, fixing an EINVAL
  return on non-data commands"

* tag 'for-linus-20180713' of git://git.kernel.dk/linux-block:
  bsg: fix bogus EINVAL on non-data commands

Merge misc fixes from Andrew Morton:
 "11 fixes"

* emailed patches form Andrew Morton <akpm@linux-foundation.org>:
  reiserfs: fix buffer overflow with long warning messages
  checkpatch: fix duplicate invalid vsprintf pointer extension '%p<foo>' messages
  mm: do not bug_on on incorrect length in __mm_populate()
  mm/memblock.c: do not complain about top-down allocations for !MEMORY_HOTREMOVE
  fs, elf: make sure to page align bss in load_elf_library
  x86/purgatory: add missing FORCE to Makefile target
  net/9p/client.c: put refcount of trans_mod in error case in parse_opts()
  mm: allow arch to supply p??_free_tlb functions
  autofs: fix slab out of bounds read in getname_kernel()
  fs/proc/task_mmu.c: fix Locked field in /proc/pid/smaps*
  mm: do not drop unused pages when userfaultd is running

ReiserFS prepares log messages into a 1024-byte buffer with no bounds
checks.  Long messages, such as the "unknown mount option" warning when
userspace passes a crafted mount options string, overflow this buffer.
This causes KASAN to report a global-out-of-bounds write.

Fix it by truncating messages to the buffer size.

Link: http://lkml.kernel.org/r/20180707203621.30922-1-ebiggers3@gmail.com
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+b890b3335a4d8c608963@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Multiline statements with invalid %p<foo> uses produce multiple
warnings.  Fix that.

e.g.:

$ cat t_block.c
void foo(void)
{
	MY_DEBUG(drv->foo,
		 "%pk",
		 foo->boo);
}

$ ./scripts/checkpatch.pl -f t_block.c
WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
#1: FILE: t_block.c:1:
+void foo(void)

WARNING: Invalid vsprintf pointer extension '%pk'
#3: FILE: t_block.c:3:
+	MY_DEBUG(drv->foo,
+		 "%pk",
+		 foo->boo);

WARNING: Invalid vsprintf pointer extension '%pk'
#3: FILE: t_block.c:3:
+	MY_DEBUG(drv->foo,
+		 "%pk",
+		 foo->boo);

total: 0 errors, 3 warnings, 6 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

t_block.c has style problems, please review.

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.

Link: http://lkml.kernel.org/r/9e8341bbe4c9877d159cb512bb701043cbfbb10b.camel@perches.comSigned-off-by: Joe Perches <joe@perches.com>
Cc: "Tobin C. Harding" <me@tobin.cc>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

syzbot has noticed that a specially crafted library can easily hit
VM_BUG_ON in __mm_populate

  kernel BUG at mm/gup.c:1242!
  invalid opcode: 0000 [#1] SMP
  CPU: 2 PID: 9667 Comm: a.out Not tainted 4.18.0-rc3 #644
  Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
  RIP: 0010:__mm_populate+0x1e2/0x1f0
  Code: 55 d0 65 48 33 14 25 28 00 00 00 89 d8 75 21 48 83 c4 20 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 75 18 f1 ff 0f 0b e8 6e 18 f1 ff <0f> 0b 31 db eb c9 e8 93 06 e0 ff 0f 1f 00 55 48 89 e5 53 48 89 fb
  Call Trace:
     vm_brk_flags+0xc3/0x100
     vm_brk+0x1f/0x30
     load_elf_library+0x281/0x2e0
     __ia32_sys_uselib+0x170/0x1e0
     do_fast_syscall_32+0xca/0x420
     entry_SYSENTER_compat+0x70/0x7f

The reason is that the length of the new brk is not page aligned when we
try to populate the it.  There is no reason to bug on that though.
do_brk_flags already aligns the length properly so the mapping is
expanded as it should.  All we need is to tell mm_populate about it.
Besides that there is absolutely no reason to to bug_on in the first
place.  The worst thing that could happen is that the last page wouldn't
get populated and that is far from putting system into an inconsistent
state.

Fix the issue by moving the length sanitization code from do_brk_flags
up to vm_brk_flags.  The only other caller of do_brk_flags is brk
syscall entry and it makes sure to provide the proper length so t here
is no need for sanitation and so we can use do_brk_flags without it.

Also remove the bogus BUG_ONs.

[osalvador@techadventures.net: fix up vm_brk_flags s@request@len@]
Link: http://lkml.kernel.org/r/20180706090217.GI32658@dhcp22.suse.czSigned-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: syzbot <syzbot+5dcb560fe12aa5091c06@syzkaller.appspotmail.com>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Mike Rapoport is converting architectures from bootmem to nobootmem
allocator.  While doing so for m68k Geert has noticed that he gets a
scary looking warning:

  WARNING: CPU: 0 PID: 0 at mm/memblock.c:230
  memblock_find_in_range_node+0x11c/0x1be
  memblock: bottom-up allocation failed, memory hotunplug may be affected
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper Not tainted
  4.18.0-rc3-atari-01343-gf2fb5f2e09a97a3c-dirty #7
  Call Trace: __warn+0xa8/0xc2
    kernel_pg_dir+0x0/0x1000
    netdev_lower_get_next+0x2/0x22
    warn_slowpath_fmt+0x2e/0x36
    memblock_find_in_range_node+0x11c/0x1be
    memblock_find_in_range_node+0x11c/0x1be
    memblock_find_in_range_node+0x0/0x1be
    vprintk_func+0x66/0x6e
    memblock_virt_alloc_internal+0xd0/0x156
    netdev_lower_get_next+0x2/0x22
    netdev_lower_get_next+0x2/0x22
    kernel_pg_dir+0x0/0x1000
    memblock_virt_alloc_try_nid_nopanic+0x58/0x7a
    netdev_lower_get_next+0x2/0x22
    kernel_pg_dir+0x0/0x1000
    kernel_pg_dir+0x0/0x1000
    EXPTBL+0x234/0x400
    EXPTBL+0x234/0x400
    alloc_node_mem_map+0x4a/0x66
    netdev_lower_get_next+0x2/0x22
    free_area_init_node+0xe2/0x29e
    EXPTBL+0x234/0x400
    paging_init+0x430/0x462
    kernel_pg_dir+0x0/0x1000
    printk+0x0/0x1a
    EXPTBL+0x234/0x400
    setup_arch+0x1b8/0x22c
    start_kernel+0x4a/0x40a
    _sinittext+0x344/0x9e8

The warning is basically saying that a top-down allocation can break
memory hotremove because memblock allocation is not movable.  But m68k
doesn't even support MEMORY_HOTREMOVE so there is no point to warn about
it.

Make the warning conditional only to configurations that care.

Link: http://lkml.kernel.org/r/20180706061750.GH32658@dhcp22.suse.czSigned-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Sam Creasey <sammy@sammy.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The current code does not make sure to page align bss before calling
vm_brk(), and this can lead to a VM_BUG_ON() in __mm_populate() due to
the requested lenght not being correctly aligned.

Let us make sure to align it properly.

Kees: only applicable to CONFIG_USELIB kernels: 32-bit and configured
for libc5.

Link: http://lkml.kernel.org/r/20180705145539.9627-1-osalvador@techadventures.netSigned-off-by: Oscar Salvador <osalvador@suse.de>
Reported-by: syzbot+5dcb560fe12aa5091c06@syzkaller.appspotmail.com
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

- Build the kernel without the fix
- Add some flag to the purgatories KBUILD_CFLAGS,I used
  -fno-asynchronous-unwind-tables
- Re-build the kernel

When you look at makes output you see that sha256.o is not re-build in the
last step.  Also readelf -S still shows the .eh_frame section for
sha256.o.

With the fix sha256.o is rebuilt in the last step.

Without FORCE make does not detect changes only made to the command line
options.  So object files might not be re-built even when they should be.
Fix this by adding FORCE where it is missing.

Link: http://lkml.kernel.org/r/20180704110044.29279-2-prudo@linux.ibm.com
Fixes: df6f2801 ("kernel/kexec_file.c: move purgatories sha256 to common code")
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>	[4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>