- 31 May, 2018 34 commits
-
-
Jaegeuk Kim authored
In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by:Greg KH <greg@kroah.com> Reported-by:
Silvio Cesare <silvio.cesare@gmail.com> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
Volatile file's data will be updated oftenly, so it'd better to place its data into hot data segment. In addition, for atomic file, we change to check FI_ATOMIC_FILE instead of FI_HOT_DATA to make code readability better. Signed-off-by:
-
Chao Yu authored
Introduce release_discard_addr() to include common codes for cleanup. Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Chao Yu authored
In build_sit_entries(), if valid_blocks in SIT block is smaller than valid_blocks in journal, for below calculation: sbi->discard_blks += old_valid_blocks - se->valid_blocks; There will be two times potential overflow: - old_valid_blocks - se->valid_blocks will overflow, and be a very large number. - sbi->discard_blks += result will overflow again, comes out a correct result accidently. Anyway, it should be fixed. Fixes: d600af23 ("f2fs: avoid unneeded loop in build_sit_entries") Fixes: 1f43e2ad ("f2fs: introduce CP_TRIMMED_FLAG to avoid unneeded discard") Signed-off-by:
-
Chao Yu authored
RW semphore dio_rwsem in struct f2fs_inode_info is introduced to avoid race between dio and data gc, but now, it is more wildly used to avoid foreground operation vs data gc. So rename it to i_gc_rwsem to improve its readability. Signed-off-by:
-
Yunlei He authored
This patch move mnt_want_write_file after range check, it's needless to check arguments with it. Signed-off-by:
Yunlei He <heyunlei@huawei.com> Reviewed-by:
-
Yunlei He authored
This patch fix missing clear FI_NO_PREALLOC in some error case Signed-off-by:
-
Jaegeuk Kim authored
This is to give a option for user to be able to recover B/foo in the below case. mkdir A sync() rename(A, B) creat (B/foo) fsync (B/foo) ---crash--- Sugessted-by:
Velayudhan Pillai <vijay@cs.utexas.edu> Signed-off-by:
-
Jaegeuk Kim authored
This patch enhances sanity check for SIT entries. syzbot hit the following crash on upstream commit 83beed7b (Fri Apr 20 17:56:32 2018 +0000) Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal syzbot dashboard link: https://syzkaller.appspot.com/bug?extid=bf9253040425feb155ad syzkaller reproducer: https://syzkaller.appspot.com/x/repro.syz?id=5692130282438656 Raw console output: https://syzkaller.appspot.com/x/log.txt?id=5095924598571008 Kernel config: https://syzkaller.appspot.com/x/.config?id=1808800213120130118 compiler: gcc (GCC) 8.0.1 20180413 (experimental) IMPORTANT: if you fix the bug, please add the following tag to the commit: Reported-by: syzbot+bf9253040425feb155ad@syzkaller.appspotmail.com It will help syzbot understand when the bug is fixed. See footer for details. If you forward the report, please keep this part and the footer. F2FS-fs (loop0): invalid crc value F2FS-fs (loop0): Try to recover 1th superblock, ret: 0 F2FS-fs (loop0): Mounted with checkpoint version = d F2FS-fs (loop0): Bitmap was wrongly cleared, blk:9740 ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:1884! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 4508 Comm: syz-executor0 Not tainted 4.17.0-rc1+ #10 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:update_sit_entry+0x1215/0x1590 fs/f2fs/segment.c:1882 RSP: 0018:ffff8801af526708 EFLAGS: 00010282 RAX: ffffed0035ea4cc0 RBX: ffff8801ad454f90 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff82eeb87e RDI: ffffed0035ea4cb6 RBP: ffff8801af526760 R08: ffff8801ad4a2480 R09: ffffed003b5e4f90 R10: ffffed003b5e4f90 R11: ffff8801daf27c87 R12: ffff8801adb8d380 R13: 0000000000000001 R14: 0000000000000008 R15: 00000000ffffffff FS: 00000000014af940(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f06bc223000 CR3: 00000001adb02000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: allocate_data_block+0x66f/0x2050 fs/f2fs/segment.c:2663 do_write_page+0x105/0x1b0 fs/f2fs/segment.c:2727 write_node_page+0x129/0x350 fs/f2fs/segment.c:2770 __write_node_page+0x7da/0x1370 fs/f2fs/node.c:1398 sync_node_pages+0x18cf/0x1eb0 fs/f2fs/node.c:1652 block_operations+0x429/0xa60 fs/f2fs/checkpoint.c:1088 write_checkpoint+0x3ba/0x5380 fs/f2fs/checkpoint.c:1405 f2fs_sync_fs+0x2fb/0x6a0 fs/f2fs/super.c:1077 __sync_filesystem fs/sync.c:39 [inline] sync_filesystem+0x265/0x310 fs/sync.c:67 generic_shutdown_super+0xd7/0x520 fs/super.c:429 kill_block_super+0xa4/0x100 fs/super.c:1191 kill_f2fs_super+0x9f/0xd0 fs/f2fs/super.c:3030 deactivate_locked_super+0x97/0x100 fs/super.c:316 deactivate_super+0x188/0x1b0 fs/super.c:347 cleanup_mnt+0xbf/0x160 fs/namespace.c:1174 __cleanup_mnt+0x16/0x20 fs/namespace.c:1181 task_work_run+0x1e4/0x290 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:191 [inline] exit_to_usermode_loop+0x2bd/0x310 arch/x86/entry/common.c:166 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:265 [inline] do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457d97 RSP: 002b:00007ffd46f9c8e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000457d97 RDX: 00000000014b09a3 RSI: 0000000000000002 RDI: 00007ffd46f9da50 RBP: 00007ffd46f9da50 R08: 0000000000000000 R09: 0000000000000009 R10: 0000000000000005 R11: 0000000000000246 R12: 00000000014b0940 R13: 0000000000000000 R14: 0000000000000002 R15: 000000000000658e RIP: update_sit_entry+0x1215/0x1590 fs/f2fs/segment.c:1882 RSP: ffff8801af526708 ---[ end trace f498328bb02610a2 ]--- Reported-and-tested-by: syzbot+bf9253040425feb155ad@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+7d6d31d3bc702f566ce3@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+0a725420475916460f12@syzkaller.appspotmail.com Reviewed-by:
-
Jaegeuk Kim authored
syzbot hit the following crash on upstream commit 87ef1202 (Wed Apr 18 19:48:17 2018 +0000) Merge tag 'ceph-for-4.17-rc2' of git://github.com/ceph/ceph-client syzbot dashboard link: https://syzkaller.appspot.com/bug?extid=83699adeb2d13579c31e C reproducer: https://syzkaller.appspot.com/x/repro.c?id=5805208181407744 syzkaller reproducer: https://syzkaller.appspot.com/x/repro.syz?id=6005073343676416 Raw console output: https://syzkaller.appspot.com/x/log.txt?id=6555047731134464 Kernel config: https://syzkaller.appspot.com/x/.config?id=1808800213120130118 compiler: gcc (GCC) 8.0.1 20180413 (experimental) IMPORTANT: if you fix the bug, please add the following tag to the commit: Reported-by: syzbot+83699adeb2d13579c31e@syzkaller.appspotmail.com It will help syzbot understand when the bug is fixed. See footer for details. If you forward the report, please keep this part and the footer. F2FS-fs (loop0): Magic Mismatch, valid(0xf2f52010) - read(0x0) F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock F2FS-fs (loop0): invalid crc value BUG: unable to handle kernel paging request at ffffed006b2a50c0 PGD 21ffee067 P4D 21ffee067 PUD 21fbeb067 PMD 0 Oops: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 4514 Comm: syzkaller989480 Not tainted 4.17.0-rc1+ #8 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:build_sit_entries fs/f2fs/segment.c:3653 [inline] RIP: 0010:build_segment_manager+0x7ef7/0xbf70 fs/f2fs/segment.c:3852 RSP: 0018:ffff8801b102e5b0 EFLAGS: 00010a06 RAX: 1ffff1006b2a50c0 RBX: 0000000000000004 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8801ac74243e RBP: ffff8801b102f410 R08: ffff8801acbd46c0 R09: fffffbfff14d9af8 R10: fffffbfff14d9af8 R11: ffff8801acbd46c0 R12: ffff8801ac742a80 R13: ffff8801d9519100 R14: dffffc0000000000 R15: ffff880359528600 FS: 0000000001e04880(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffed006b2a50c0 CR3: 00000001ac6ac000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: f2fs_fill_super+0x4095/0x7bf0 fs/f2fs/super.c:2803 mount_bdev+0x30c/0x3e0 fs/super.c:1165 f2fs_mount+0x34/0x40 fs/f2fs/super.c:3020 mount_fs+0xae/0x328 fs/super.c:1268 vfs_kern_mount.part.34+0xd4/0x4d0 fs/namespace.c:1037 vfs_kern_mount fs/namespace.c:1027 [inline] do_new_mount fs/namespace.c:2517 [inline] do_mount+0x564/0x3070 fs/namespace.c:2847 ksys_mount+0x12d/0x140 fs/namespace.c:3063 __do_sys_mount fs/namespace.c:3077 [inline] __se_sys_mount fs/namespace.c:3074 [inline] __x64_sys_mount+0xbe/0x150 fs/namespace.c:3074 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x443d6a RSP: 002b:00007ffd312813c8 EFLAGS: 00000297 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000020000c00 RCX: 0000000000443d6a RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007ffd312813d0 RBP: 0000000000000003 R08: 0000000020016a00 R09: 000000000000000a R10: 0000000000000000 R11: 0000000000000297 R12: 0000000000000004 R13: 0000000000402c60 R14: 0000000000000000 R15: 0000000000000000 RIP: build_sit_entries fs/f2fs/segment.c:3653 [inline] RSP: ffff8801b102e5b0 RIP: build_segment_manager+0x7ef7/0xbf70 fs/f2fs/segment.c:3852 RSP: ffff8801b102e5b0 CR2: ffffed006b2a50c0 ---[ end trace a2034989e196ff17 ]--- Reported-and-tested-by: syzbot+83699adeb2d13579c31e@syzkaller.appspotmail.com Reviewed-by:
-
Jaegeuk Kim authored
syzbot has tested the proposed patch but the reproducer still triggered crash: kernel BUG at fs/f2fs/inode.c:LINE! F2FS-fs (loop1): invalid crc value F2FS-fs (loop5): Magic Mismatch, valid(0xf2f52010) - read(0x0) F2FS-fs (loop5): Can't find valid F2FS filesystem in 1th superblock F2FS-fs (loop5): invalid crc value ------------[ cut here ]------------ kernel BUG at fs/f2fs/inode.c:238! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 4886 Comm: syz-executor1 Not tainted 4.17.0-rc1+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:do_read_inode fs/f2fs/inode.c:238 [inline] RIP: 0010:f2fs_iget+0x3307/0x3ca0 fs/f2fs/inode.c:313 RSP: 0018:ffff8801c44a70e8 EFLAGS: 00010293 RAX: ffff8801ce208040 RBX: ffff8801b3621080 RCX: ffffffff82eace18 F2FS-fs (loop2): Magic Mismatch, valid(0xf2f52010) - read(0x0) RDX: 0000000000000000 RSI: ffffffff82eaf047 RDI: 0000000000000007 RBP: ffff8801c44a7410 R08: ffff8801ce208040 R09: ffffed0039ee4176 R10: ffffed0039ee4176 R11: ffff8801cf720bb7 R12: ffff8801c0efa000 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f753aa9d700(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 ------------[ cut here ]------------ CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel BUG at fs/f2fs/inode.c:238! CR2: 0000000001b03018 CR3: 00000001c8b74000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: f2fs_fill_super+0x4377/0x7bf0 fs/f2fs/super.c:2842 mount_bdev+0x30c/0x3e0 fs/super.c:1165 f2fs_mount+0x34/0x40 fs/f2fs/super.c:3020 mount_fs+0xae/0x328 fs/super.c:1268 vfs_kern_mount.part.34+0xd4/0x4d0 fs/namespace.c:1037 vfs_kern_mount fs/namespace.c:1027 [inline] do_new_mount fs/namespace.c:2517 [inline] do_mount+0x564/0x3070 fs/namespace.c:2847 ksys_mount+0x12d/0x140 fs/namespace.c:3063 __do_sys_mount fs/namespace.c:3077 [inline] __se_sys_mount fs/namespace.c:3074 [inline] __x64_sys_mount+0xbe/0x150 fs/namespace.c:3074 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457daa RSP: 002b:00007f753aa9cba8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 0000000000457daa RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007f753aa9cbf0 RBP: 0000000000000064 R08: 0000000020016a00 R09: 0000000020000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 0000000000000064 R14: 00000000006fcb80 R15: 0000000000000000 RIP: do_read_inode fs/f2fs/inode.c:238 [inline] RSP: ffff8801c44a70e8 RIP: f2fs_iget+0x3307/0x3ca0 fs/f2fs/inode.c:313 RSP: ffff8801c44a70e8 invalid opcode: 0000 [#2] SMP KASAN ---[ end trace 1cbcbec2156680bc ]--- Reported-and-tested-by: syzbot+41a1b341571f0952badb@syzkaller.appspotmail.com Reviewed-by:
-
Jaegeuk Kim authored
syzbot hit the following crash on upstream commit 83beed7b (Fri Apr 20 17:56:32 2018 +0000) Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal syzbot dashboard link: https://syzkaller.appspot.com/bug?extid=d154ec99402c6f628887 C reproducer: https://syzkaller.appspot.com/x/repro.c?id=5414336294027264 syzkaller reproducer: https://syzkaller.appspot.com/x/repro.syz?id=5471683234234368 Raw console output: https://syzkaller.appspot.com/x/log.txt?id=5436660795834368 Kernel config: https://syzkaller.appspot.com/x/.config?id=1808800213120130118 compiler: gcc (GCC) 8.0.1 20180413 (experimental) IMPORTANT: if you fix the bug, please add the following tag to the commit: Reported-by: syzbot+d154ec99402c6f628887@syzkaller.appspotmail.com It will help syzbot understand when the bug is fixed. See footer for details. If you forward the report, please keep this part and the footer. F2FS-fs (loop0): Magic Mismatch, valid(0xf2f52010) - read(0x0) F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock F2FS-fs (loop0): invalid crc value ------------[ cut here ]------------ kernel BUG at fs/f2fs/node.c:1185! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 4549 Comm: syzkaller704305 Not tainted 4.17.0-rc1+ #10 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__get_node_page+0xb68/0x16e0 fs/f2fs/node.c:1185 RSP: 0018:ffff8801d960e820 EFLAGS: 00010293 RAX: ffff8801d88205c0 RBX: 0000000000000003 RCX: ffffffff82f6cc06 RDX: 0000000000000000 RSI: ffffffff82f6d5e8 RDI: 0000000000000004 RBP: ffff8801d960ec30 R08: ffff8801d88205c0 R09: ffffed003b5e46c2 R10: 0000000000000003 R11: 0000000000000003 R12: ffff8801a86e00c0 R13: 0000000000000001 R14: ffff8801a86e0530 R15: ffff8801d9745240 FS: 000000000072c880(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3d403209b8 CR3: 00000001d8f3f000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: get_node_page fs/f2fs/node.c:1237 [inline] truncate_xattr_node+0x152/0x2e0 fs/f2fs/node.c:1014 remove_inode_page+0x200/0xaf0 fs/f2fs/node.c:1039 f2fs_evict_inode+0xe86/0x1710 fs/f2fs/inode.c:547 evict+0x4a6/0x960 fs/inode.c:557 iput_final fs/inode.c:1519 [inline] iput+0x62d/0xa80 fs/inode.c:1545 f2fs_fill_super+0x5f4e/0x7bf0 fs/f2fs/super.c:2849 mount_bdev+0x30c/0x3e0 fs/super.c:1164 f2fs_mount+0x34/0x40 fs/f2fs/super.c:3020 mount_fs+0xae/0x328 fs/super.c:1267 vfs_kern_mount.part.34+0xd4/0x4d0 fs/namespace.c:1037 vfs_kern_mount fs/namespace.c:1027 [inline] do_new_mount fs/namespace.c:2518 [inline] do_mount+0x564/0x3070 fs/namespace.c:2848 ksys_mount+0x12d/0x140 fs/namespace.c:3064 __do_sys_mount fs/namespace.c:3078 [inline] __se_sys_mount fs/namespace.c:3075 [inline] __x64_sys_mount+0xbe/0x150 fs/namespace.c:3075 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x443dea RSP: 002b:00007ffcc7882368 EFLAGS: 00000297 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000020000c00 RCX: 0000000000443dea RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007ffcc7882370 RBP: 0000000000000003 R08: 0000000020016a00 R09: 000000000000000a R10: 0000000000000000 R11: 0000000000000297 R12: 0000000000000004 R13: 0000000000402ce0 R14: 0000000000000000 R15: 0000000000000000 RIP: __get_node_page+0xb68/0x16e0 fs/f2fs/node.c:1185 RSP: ffff8801d960e820 ---[ end trace 4edbeb71f002bb76 ]--- Reported-and-tested-by: syzbot+d154ec99402c6f628887@syzkaller.appspotmail.com Signed-off-by:
-
Eric Biggers authored
The file is called "features", not "feature". Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
-
Chao Yu authored
This patch moves error handling from commit_inmem_pages() into __commit_inmem_page() for cleanup, no logic change. Signed-off-by:
-
Sheng Yong authored
Only dir may have F2FS_INLINE_DOTS flag, so there is no need to check the flag in recover flow. Signed-off-by:
Sheng Yong <shengyong1@huawei.com> Reviewed-by:
-
Sheng Yong authored
This patch removes duplicated dquot_initialize in recover_orphan_inode(), and fix the error handling if dquot_initialize fails. Signed-off-by:
-
Chao Yu authored
dquot_initialize() can fail due to any exception inside quota subsystem, f2fs needs to be aware of it, and return correct return value to caller. Signed-off-by:
-
Yunlei He authored
v4->v5: move data corruption check to __submit_discard_cmd, in order to control discard io submitted more accurately, besides, increase async thread wait time if data corruption detected. This patch stop async thread and umount process to issue discard if something wrong with f2fs, which is similar to fstrim. Signed-off-by:
-
Chao Yu authored
In f2fs_ioc_commit_atomic_write, if file is volatile, return -EINVAL to indicate that commit failure. Signed-off-by:
-
Yunlei He authored
If a file not set type as hot, has dirty pages more than threshold 64 before starting atomic write, may be lose hot flag. v1->v2: move set FI_ATOMIC_FILE flag behind flush dirty pages too, in case of dirty pages before starting atomic use atomic mode to write back. Signed-off-by:
-
Sheng Yong authored
`cur' will never be NULL, we should check inmem_pages list instead. Signed-off-by:
-
Chao Yu authored
Thread GC thread - f2fs_ioc_start_atomic_write - get_dirty_pages - filemap_write_and_wait_range - f2fs_gc - do_garbage_collect - gc_data_segment - move_data_page - f2fs_is_atomic_file - set_page_dirty - set_inode_flag(, FI_ATOMIC_FILE) Dirty data page can still be generated by GC in race condition as above call stack. This patch adds fi->dio_rwsem[WRITE] in f2fs_ioc_start_atomic_write to avoid such race. Signed-off-by:
-
Souptick Joarder authored
Use new return type vm_fault_t for page_mkwrite and fault handler. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by:
Matthew Wilcox <mawilcox@microsoft.com> Acked-by:
-
Zhikang Zhang authored
In the structure of f2fs_inode, i_extra_size's type is __le16, so we should keep type consistent when using it. Fixes: 704956ec ("f2fs: support inode checksum") Signed-off-by:
Zhikang Zhang <zhangzhikang1@huawei.com> Signed-off-by:
-
Zhikang Zhang authored
We should check valid_map_mir and block count to ensure the flushed raw_sit is correct. Signed-off-by:
-
Chao Yu authored
Correct return value in two cases: - return EINVAL if end boundary is out-of-range. - return EIO if fs needs off-line check. Signed-off-by:
-
Chao Yu authored
This patch fixes to show missing encrypt/inline_data flag in FS_IOC_GETFLAGS like ext4 does. Signed-off-by:
-
Chao Yu authored
Now F2FS_FL_USER_VISIBLE and F2FS_FL_USER_MODIFIABLE has included F2FS_PROJINHERIT_FL, so remove unneeded F2FS_PROJINHERIT_FL when using visible/modifiable flag macro. Signed-off-by:
-
Chao Yu authored
Related to https://lkml.org/lkml/2018/4/8/661 Sometimes, we need to write meta data to new allocated block address, then we will allocate a zeroed page in inner inode's address space, and fill partial data in it, and leave other place with zero value which means some fields are initial status. There are two inner inodes (meta inode and node inode) setting __GFP_ZERO, I have just checked them, for both of them, we can avoid using __GFP_ZERO, and do initialization by ourselves to avoid unneeded/redundant zeroing from mm. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Yunlei He authored
This patch modify max_requests to UINT_MAX, to issue all big range discards in umount. Signed-off-by:
-
Chao Yu authored
For buffered IO, we don't need to use block plug to cache bio, for direct IO, generic f2fs_direct_IO has already added block plug, so let's remove redundant one in .write_iter. As Yunlei described in his patch: -f2fs_file_write_iter -blk_start_plug -__generic_file_write_iter ... -do_blockdev_direct_IO -blk_start_plug ... -blk_finish_plug ... -blk_finish_plug which may conduct performance decrease in our platform Signed-off-by: -
Yunlong Song authored
Since the layout of regular dentry block is different from inline dentry block, zero_user_segment starting from MAX_INLINE_DATA(dir) is not correct for regular dentry block, besides, bitmap is already copied and used, so there is no necessary to zero page at all, so just remove the zero_user_segment is OK. Signed-off-by:
Yunlong Song <yunlong.song@huawei.com> Reviewed-by:
-
Chao Yu authored
Previously, we use generic FS_*_FL defined by vfs to indicate inode status for each bit of i_flags, so f2fs's flag status definition is tied to vfs' one, it will be hard for f2fs to reuse bits f2fs never used to indicate new status.. In order to solve this issue, we introduce private inode status mapping, Note, for these bits have already been persisted into disk, we should never change their definition, for other ones, we can remap them for later new coming status. Signed-off-by:
-
Jaegeuk Kim authored
We don't need to wait for whole bunch of discard candidates in fstrim, since runtime discard will issue them in idle time. Signed-off-by:
-
- 30 May, 2018 3 commits
-
-
Chao Yu authored
In order to avoid interfering normal r/w IO, let's turn down IO priority of discard issued from background. Signed-off-by:
-
Chao Yu authored
Now, we issue discard asynchronously in separated thread instead of in checkpoint, after that, we won't encounter long latency in checkpoint due to huge number of synchronous discard command handling, so, we don't need to split checkpoint to do trim in batch, merge it and obsolete related sysfs entry. Signed-off-by:
-
Jaegeuk Kim authored
In the high utilization like over 80%, we don't expect huge # of large discard commands, but do many small pending discards which affects FTL GCs a lot. Let's issue them in that case. Reviewed-by:
-
- 29 May, 2018 2 commits
-
-
Jaegeuk Kim authored
For non-atomic files, this patch adds an option to give nobarrier which doesn't issue flush commands to the device. Reviewed-by:
-
Jaegeuk Kim authored
The fstrim gathers huge number of large discard commands, and tries to issue without IO awareness, which results in long user-perceive IO latencies on READ, WRITE, and FLUSH in UFS. We've observed some of commands take several seconds due to long discard latency. This patch limits the maximum size to 2MB per candidate, and check IO congestion when issuing them to disk. Reviewed-by:
-
- 04 May, 2018 1 commit
-
-
Jaegeuk Kim authored
pageout() in MM traslates EAGAIN, so calls handle_write_error() -> mapping_set_error() -> set_bit(AS_EIO, ...). file_write_and_wait_range() will see EIO error, which is critical to return value of fsync() followed by atomic_write failure to user. Signed-off-by:
-
