- 01 Nov, 2011 40 commits
-
-
Éric Piel authored
After an "unexpected" reboot, I found this Oops in my logs: divide error: 0000 [#1] PREEMPT SMP=20 CPU 0=20 Modules linked in: lis3lv02d hp_wmi input_polldev [...] Pid: 390, comm: modprobe Tainted: G C 2.6.39-rc7-wl+=20 RIP: 0010:[<ffffffffa014b427>] [<ffffffffa014b427>] lis3lv02d_poweron+0x4e/0x94 [lis3lv02d] RSP: 0018:ffff8801d6407cf8 EFLAGS: 00010246 RAX: 0000000000000bb8 RBX: ffffffffa014e000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffea00066e4708 RDI: ffff8801df002700 RBP: ffff8801d6407d18 R08: ffffea00066c5a30 R09: ffffffff812498c9 R10: ffff8801d7bfcea0 R11: ffff8801d7bfce10 R12: 0000000000000bb8 R13: 00000000ffffffda R14: ffffffffa0154120 R15: ffffffffa0154030 =46S: 00007fc0705db700(0000) GS:ffff8801dfa00000(0000) knlGS:0 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f33549174f0 CR3: 00000001d65c9000 CR4: 00000000000406f0 Process modprobe (pid: 390, threadinfo ffff8801d6406000, task ffff8801d6b40= 000) Stack: ffffffffa0154120 62ffffffa0154030 ffffffffa014e000 00000000ffffffea ffff8801d6407d58 ffffffffa014bcc1 0000000000000000 0000000000000048 ffff8801d8bae800 00000000ffffffea 00000000ffffffda ffffffffa0154120 Call Trace: [<ffffffffa014bcc1>] lis3lv02d_init_device+0x1ce/0x496 [lis3lv02d] [<ffffffffa01522ff>] lis3lv02d_add+0x10f/0x17c [hp_accel] [<ffffffff81233e11>] acpi_device_probe+0x49/0x117 [...] Code: 3a 75 06 80 4d ef 50 eb 04 80 4d ef 40 0f b6 55 ef be 21 00 00 00 48 89 df ff 53 18 44 8b 63 6c e8 3e fc ff ff 89 c1 44 89 e0 99 <f7> f9 89 c7 e8 93 82 ef e0 48 83 7b 30 00 74 2d 45 31 e4 80 7b=20 RIP [<ffffffffa014b427>] lis3lv02d_poweron+0x4e/0x94 [lis3lv02d] RSP <ffff8801d6407cf8> >From my POV, it looks like the hardware is not working as expected and returns a bogus data rate. The driver doesn't check the result and directly uses it as some sort of divisor in some places: msleep(lis3->pwron_delay / lis3lv02d_get_odr()); Under this circumstances, this could very well cause the "divide by zero" exception from above. For now, I fixed it the easiest and most obvious way: Check if the result is sane and if it isn't use a sane default instead. I went for "100" in the latter case, simply because /sys/devices/platform/lis3lv02d/rate returns it on a successful boot. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jonathan Cameron authored
A straightforward looking use of idr for a device id. Signed-off-by:
Jonathan Cameron <jic23@cam.ac.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Acked-by:
Darrick J. Wong <djwong@us.ibm.com> Signed-off-by:
-
Jonathan Cameron authored
hwmon was using an idr with a NULL pointer, so convert to an ida which then allows use of Rusty's ida_simple_get. Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: David Airlie <airlied@linux.ie> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by:
-
Jiaju Zhang authored
Added missing _secs in the help message of config DEFAULT_HUNG_TASK_TIMEOUT. Signed-off-by:
Jiaju Zhang <jjzhang@suse.de> Signed-off-by:
-
Pavel Emelyanov authored
Currently a statfs on a pipe's /proc/<pid>/fd/ link returns -ENOSYS. Wire pipfs up so that the statfs succeeds. This is required by checkpoint-restart in the userspace to make it possible to distinguish pipes from fifos. When we dump information about task's open files we use the /proc/pid/fd directoy's symlinks and the fact that opening any of them gives us exactly the same dentry->inode pair as the original process has. Now if a task we're dumping has opened pipe and fifo we need to detect this and act accordingly. Knowing that an fd with type S_ISFIFO resides on a pipefs is the most precise way. Signed-off-by:
Pavel Emelyanov <xemul@parallels.com> Reviewed-by:
Tejun Heo <tj@kernel.org> Acked-by:
Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
-
Michael Cree authored
Signed-off-by:
Michael Cree <mcree@orcon.net.nz> Reviewed-by:
Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by:
-
Michael Cree authored
Somehow wiring up the accept4 syscall on Alpha was missed long ago. This commit rectifies that oversight. Signed-off-by:
-
Dimitri Sivanich authored
Avoid false sharing of the vm_stat array. This was found to adversely affect tmpfs I/O performance. Tests run on a 640 cpu UV system. With 120 threads doing parallel writes, each to different tmpfs mounts: No patch: ~300 MB/sec With vm_stat alignment: ~430 MB/sec Signed-off-by:
Dimitri Sivanich <sivanich@sgi.com> Acked-by:
Christoph Lameter <cl@gentwo.org> Acked-by:
Mel Gorman <mel@csn.ul.ie> Signed-off-by:
-
Hugh Dickins authored
A process spent 30 minutes exiting, just munlocking the pages of a large anonymous area that had been alternately mprotected into page-sized vmas: for every single page there's an anon_vma walk through all the other little vmas to find the right one. A general fix to that would be a lot more complicated (use prio_tree on anon_vma?), but there's one very simple thing we can do to speed up the common case: if a page to be munlocked is mapped only once, then it is our vma that it is mapped into, and there's no need whatever to walk through all the others. Okay, there is a very remote race in munlock_vma_pages_range(), if between its follow_page() and lock_page(), another process were to munlock the same page, then page reclaim remove it from our vma, then another process mlock it again. We would find it with page_mapcount 1, yet it's still mlocked in another process. But never mind, that's much less likely than the down_read_trylock() failure which munlocking already tolerates (in try_to_unmap_one()): in due course page reclaim will discover and move the page to unevictable instead. [akpm@linux-foundation.org: add comment] Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Michel Lespinasse <walken@google.com> Signed-off-by:
-
Hillf Danton authored
There are three cases of update_mmu_cache() in the file, and the case in function collapse_huge_page() has a typo, namely the last parameter used, which is corrected based on the other two cases. Due to the define of update_mmu_cache by X86, the only arch that implements THP currently, the change here has no really crystal point, but one or two minutes of efforts could be saved for those archs that are likely to support THP in future. Signed-off-by:
Hillf Danton <dhillf@gmail.com> Cc: Johannes Weiner <jweiner@redhat.com> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Hillf Danton authored
The THP copy-on-write handler falls back to regular-sized pages for a huge page replacement upon allocation failure or if THP has been individually disabled in the target VMA. The loop responsible for copying page-sized chunks accidentally uses multiples of PAGE_SHIFT instead of PAGE_SIZE as the virtual address arg for copy_user_highpage(). Signed-off-by:
Johannes Weiner <jweiner@redhat.com> Reviewed-by:
-
Christoph Lameter authored
MCL_FUTURE does not move pages between lru list and draining the LRU per cpu pagevecs is a nasty activity. Avoid doing it unecessarily. Signed-off-by:
Minchan Kim <minchan.kim@gmail.com> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Acked-by:
-
Mel Gorman authored
If compaction can proceed, shrink_zones() stops doing any work but its callers still call shrink_slab() which raises the priority and potentially sleeps. This is unnecessary and wasteful so this patch aborts direct reclaim/compaction entirely if compaction can proceed. Signed-off-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Rik van Riel <riel@redhat.com> Reviewed-by:
-
Rik van Riel authored
When suffering from memory fragmentation due to unfreeable pages, THP page faults will repeatedly try to compact memory. Due to the unfreeable pages, compaction fails. Needless to say, at that point page reclaim also fails to create free contiguous 2MB areas. However, that doesn't stop the current code from trying, over and over again, and freeing a minimum of 4MB (2UL << sc->order pages) at every single invocation. This resulted in my 12GB system having 2-3GB free memory, a corresponding amount of used swap and very sluggish response times. This can be avoided by having the direct reclaim code not reclaim from zones that already have plenty of free memory available for compaction. If compaction still fails due to unmovable memory, doing additional reclaim will only hurt the system, not help. [jweiner@redhat.com: change comment to explain the order check] Signed-off-by:
-
Minchan Kim authored
When a race between putback_lru_page() and shmem_lock with lock=0 happens, progrom execution order is as follows, but clear_bit in processor #1 could be reordered right before spin_unlock of processor #1. Then, the page would be stranded on the unevictable list. spin_lock SetPageLRU spin_unlock clear_bit(AS_UNEVICTABLE) spin_lock if PageLRU() if !test_bit(AS_UNEVICTABLE) move evictable list smp_mb if !test_bit(AS_UNEVICTABLE) move evictable list spin_unlock But, pagevec_lookup() in scan_mapping_unevictable_pages() has rcu_read_[un]lock() so it could protect reordering before reaching test_bit(AS_UNEVICTABLE) on processor #1 so this problem never happens. But it's a unexpected side effect and we should solve this problem properly. This patch adds a barrier after mapping_clear_unevictable. I didn't meet this problem but just found during review. Signed-off-by: -
H Hartley Sweeten authored
Quiet the sparse noise: warning: symbol 'khugepaged_scan' was not declared. Should it be static? warning: context imbalance in 'khugepaged_scan_mm_slot' - unexpected unlock Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <jweiner@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
H Hartley Sweeten authored
Quiet the spares noise: warning: symbol 'default_policy' was not declared. Should it be static? Signed-off-by:
-
H Hartley Sweeten authored
Quiet the following sparse noise: warning: symbol 'swap_token_memcg' was not declared. Should it be static? Signed-off-by:
-
H Hartley Sweeten authored
Quiet the following sparse noise in this file: warning: symbol 'memblock_overlaps_region' was not declared. Should it be static? Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers,com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Tomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by:
-
Johannes Weiner authored
At one point, anonymous pages were supposed to go on the unevictable list when no swap space was configured, and the idea was to manually rescue those pages after adding swap and making them evictable again. But nowadays, swap-backed pages on the anon LRU list are not scanned without available swap space anyway, so there is no point in moving them to a separate list anymore. The manual rescue could also be used in case pages were stranded on the unevictable list due to race conditions. But the code has been around for a while now and newly discovered bugs should be properly reported and dealt with instead of relying on such a manual fixup. In addition to the lack of a usecase, the sysfs interface to rescue pages from a specific NUMA node has been broken since its introduction, so it's unlikely that anybody ever relied on that. This patch removes the functionality behind the sysctl and the node-interface and emits a one-time warning when somebody tries to access either of them. Signed-off-by:
Kautuk Consul <consul.kautuk@gmail.com> Reviewed-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Kautuk Consul authored
write_scan_unevictable_node() checks the value req returned by strict_strtoul() and returns 1 if req is 0. However, when strict_strtoul() returns 0, it means successful conversion of buf to unsigned long. Due to this, the function was not proceeding to scan the zones for unevictable pages even though we write a valid value to the scan_unevictable_pages sys file. Change this check slightly to check for invalid value in buf as well as 0 value stored in res after successful conversion via strict_strtoul. In both cases, we do not perform the scanning of this node's zones. Signed-off-by:
-
Li Haifeng authored
Signed-off-by:
Li Haifeng <omycle@gmail.com> Signed-off-by:
-
Kyungmin Park authored
There's no compact_zone_order() user outside file scope, so make it static. Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
David Rientjes <rientjes@google.com> Reviewed-by:
-
Dean Nelson authored
Commit fb46e735 ("HWPOISON: Convert pr_debugs to pr_info) authored by Andi Kleen converted a number of pr_debug()s to pr_info()s. About the same time additional code with pr_debug()s was added by two other commits 8c6c2ecb ("HWPOSION, hugetlb: recover from free hugepage error when !MF_COUNT_INCREASED") and d950b958 ("HWPOISON, hugetlb: soft offlining for hugepage"). And these pr_debug()s failed to get converted to pr_info()s. This patch converts them as well. And does some minor related whitespace cleanup. Signed-off-by:
Dean Nelson <dnelson@redhat.com> Reviewed-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Tao Ma authored
On the ext4 mailing list[1], we got some report about errors in __find_get_block_slow(), but the information is very limited. If the device information is given, we can know the name of the sick volume. Futhermore, we can get the corresponding status of that block(group, inode block etc) by analyzing the disk layout. [1] http://marc.info/?l=linux-ext4&m=131379831421147&w=2Signed-off-by:
Tao Ma <boyu.mt@taobao.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Kautuk Consul authored
The ret variable is really not needed in mm_take_all_locks(). Signed-off-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Mikulas Patocka authored
The callback must not return -1 when nr_to_scan is zero. Fix the bug in fs/super.c and add this requirement to the callback specification. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Andrew Morton authored
fiddle wording Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Wanlong Gao authored
try_to_unmap_one() is called by try_to_unmap_ksm(), too. Signed-off-by:
Wanlong Gao <gaowanlong@cn.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Joe Perches authored
Some vmalloc failure paths do not report OOM conditions. Add warn_alloc_failed, which also does a dump_stack, to those failure paths. This allows more site specific vmalloc failure logging message printks to be removed. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Alex,Shi authored
There 2 places to read pgdat in kswapd. One is return from a successful balance, another is waked up from kswapd sleeping. The new_order and new_classzone_idx represent the balance input order and classzone_idx. But current new_order and new_classzone_idx are not assigned after kswapd_try_to_sleep(), that will cause a bug in the following scenario. 1: after a successful balance, kswapd goes to sleep, and new_order = 0; new_classzone_idx = __MAX_NR_ZONES - 1; 2: kswapd waked up with order = 3 and classzone_idx = ZONE_NORMAL 3: in the balance_pgdat() running, a new balance wakeup happened with order = 5, and classzone_idx = ZONE_NORMAL 4: the first wakeup(order = 3) finished successufly, return order = 3 but, the new_order is still 0, so, this balancing will be treated as a failed balance. And then the second tighter balancing will be missed. So, to avoid the above problem, the new_order and new_classzone_idx need to be assigned for later successful comparison. Signed-off-by:
Alex Shi <alex.shi@intel.com> Acked-by:
Pádraig Brady <P@draigBrady.com> Signed-off-by:
-
Jonghwan Choi authored
warning: function 'memblock_memory_can_coalesce' with external linkage has definition. Signed-off-by:
Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by:
-
Alex,Shi authored
In commit 215ddd66 ("mm: vmscan: only read new_classzone_idx from pgdat when reclaiming successfully") , Mel Gorman said kswapd is better to sleep after a unsuccessful balancing if there is tighter reclaim request pending in the balancing. But in the following scenario, kswapd do something that is not matched our expectation. The patch fixes this issue. 1, Read pgdat request A (classzone_idx, order = 3) 2, balance_pgdat() 3, During pgdat, a new pgdat request B (classzone_idx, order = 5) is placed 4, balance_pgdat() returns but failed since returned order = 0 5, pgdat of request A assigned to balance_pgdat(), and do balancing again. While the expectation behavior of kswapd should try to sleep. Signed-off-by:
Tim Chen <tim.c.chen@linux.intel.com> Acked-by:
-
Akinobu Mita authored
This adds support for highmem pages poisoning and verification to the debug-pagealloc feature for no-architecture support. [akpm@linux-foundation.org: remove unneeded preempt_disable/enable] Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Joe Perches authored
Add __attribute__((format (printf...) to the function to validate format and arguments. Use vsprintf extension %pV to avoid any possible message interleaving. Coalesce format string. Convert printks/pr_warning to pr_warn. [akpm@linux-foundation.org: use the __printf() macro] Signed-off-by:
-
Sonic Zhang authored
On NOMMU architectures, if physical memory doesn't start from 0, ARCH_PFN_OFFSET is defined to generate page index in mem_map array. Because virtual address is equal to physical address, PAGE_OFFSET is always 0. virt_to_page and page_to_virt should not index page by PAGE_OFFSET directly. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Cc: Greg Ungerer <gerg@snapgear.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Andrea Arcangeli authored
This adds THP support to mremap (decreases the number of split_huge_page() calls). Here are also some benchmarks with a proggy like this: === #define _GNU_SOURCE #include <sys/mman.h> #include <stdlib.h> #include <stdio.h> #include <string.h> #include <sys/time.h> #define SIZE (5UL*1024*1024*1024) int main() { static struct timeval oldstamp, newstamp; long diffsec; char *p, *p2, *p3, *p4; if (posix_memalign((void **)&p, 2*1024*1024, SIZE)) perror("memalign"), exit(1); if (posix_memalign((void **)&p2, 2*1024*1024, SIZE)) perror("memalign"), exit(1); if (posix_memalign((void **)&p3, 2*1024*1024, 4096)) perror("memalign"), exit(1); memset(p, 0xff, SIZE); memset(p2, 0xff, SIZE); memset(p3, 0x77, 4096); gettimeofday(&oldstamp, NULL); p4 = mremap(p, SIZE, SIZE, MREMAP_FIXED|MREMAP_MAYMOVE, p3); gettimeofday(&newstamp, NULL); diffsec = newstamp.tv_sec - oldstamp.tv_sec; diffsec = newstamp.tv_usec - oldstamp.tv_usec + 1000000 * diffsec; printf("usec %ld\n", diffsec); if (p == MAP_FAILED || p4 != p3) //if (p == MAP_FAILED) perror("mremap"), exit(1); if (memcmp(p4, p2, SIZE)) printf("mremap bug\n"), exit(1); printf("ok\n"); return 0; } === THP on Performance counter stats for './largepage13' (3 runs): 69195836 dTLB-loads ( +- 3.546% ) (scaled from 50.30%) 60708 dTLB-load-misses ( +- 11.776% ) (scaled from 52.62%) 676266476 dTLB-stores ( +- 5.654% ) (scaled from 69.54%) 29856 dTLB-store-misses ( +- 4.081% ) (scaled from 89.22%) 1055848782 iTLB-loads ( +- 4.526% ) (scaled from 80.18%) 8689 iTLB-load-misses ( +- 2.987% ) (scaled from 58.20%) 7.314454164 seconds time elapsed ( +- 0.023% ) THP off Performance counter stats for './largepage13' (3 runs): 1967379311 dTLB-loads ( +- 0.506% ) (scaled from 60.59%) 9238687 dTLB-load-misses ( +- 22.547% ) (scaled from 61.87%) 2014239444 dTLB-stores ( +- 0.692% ) (scaled from 60.40%) 3312335 dTLB-store-misses ( +- 7.304% ) (scaled from 67.60%) 6764372065 iTLB-loads ( +- 0.925% ) (scaled from 79.00%) 8202 iTLB-load-misses ( +- 0.475% ) (scaled from 70.55%) 9.693655243 seconds time elapsed ( +- 0.069% ) grep thp /proc/vmstat thp_fault_alloc 35849 thp_fault_fallback 0 thp_collapse_alloc 3 thp_collapse_alloc_failed 0 thp_split 0 thp_split 0 confirms no thp split despite plenty of hugepages allocated. The measurement of only the mremap time (so excluding the 3 long memset and final long 10GB memory accessing memcmp): THP on usec 14824 usec 14862 usec 14859 THP off usec 256416 usec 255981 usec 255847 With an older kernel without the mremap optimizations (the below patch optimizes the non THP version too). THP on usec 392107 usec 390237 usec 404124 THP off usec 444294 usec 445237 usec 445820 I guess with a threaded program that sends more IPI on large SMP it'd create an even larger difference. All debug options are off except DEBUG_VM to avoid skewing the results. The only problem for native 2M mremap like it happens above both the source and destination address must be 2M aligned or the hugepmd can't be moved without a split but that is an hardware limitation. [akpm@linux-foundation.org: coding-style nitpicking] Signed-off-by: -
Andrea Arcangeli authored
This replaces ptep_clear_flush() with ptep_get_and_clear() and a single flush_tlb_range() at the end of the loop, to avoid sending one IPI for each page. The mmu_notifier_invalidate_range_start/end section is enlarged accordingly but this is not going to fundamentally change things. It was more by accident that the region under mremap was for the most part still available for secondary MMUs: the primary MMU was never allowed to reliably access that region for the duration of the mremap (modulo trapping SIGSEGV on the old address range which sounds unpractical and flakey). If users wants secondary MMUs not to lose access to a large region under mremap they should reduce the mremap size accordingly in userland and run multiple calls. Overall this will run faster so it's actually going to reduce the time the region is under mremap for the primary MMU which should provide a net benefit to apps. For KVM this is a noop because the guest physical memory is never mremapped, there's just no point it ever moving it while guest runs. One target of this optimization is JVM GC (so unrelated to the mmu notifier logic). Signed-off-by:
-
Andrea Arcangeli authored
Using "- 1" relies on the old_end to be page aligned and PAGE_SIZE > 1, those are reasonable requirements but the check remains obscure and it looks more like an off by one error than an overflow check. This I feel will improve readability. Signed-off-by:
-
Sam Ravnborg authored
With the NO_BOOTMEM symbol added architectures may now use the following syntax to tell that they do not need bootmem: select NO_BOOTMEM This is much more convinient than adding a new kconfig symbol which was otherwise required. Adding this symbol does not conflict with the architctures that already define their own symbol. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Yinghai Lu <yinghai@kernel.org> Acked-by:
-
