Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

identical to import_single_range()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

We don't need req in either of those.  We don't need nr_segs in caller.
We don't really need len in caller either - iov_iter_count(&iter) will do.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

the only non-trivial detail is that we do it before rw_verify_area(),
so we'd better cap the length ourselves in aio_setup_single_rw()
case (for vectored case rw_copy_check_uvector() will do that for us).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

get it closer to matching {compat_,}rw_copy_check_uvector().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

We have observed a BUG() crash in fs/attr.c:notify_change(). The crash
occurs during an rsync into a filesystem that is exported via NFS.

1.) fs/attr.c:notify_change() modifies the caller's version of attr.
2.) 6de0ec00 ("VFS: make notify_change pass ATTR_KILL_S*ID to
    setattr operations") introduced a BUG() restriction such that "no
    function will ever call notify_change() with both ATTR_MODE and
    ATTR_KILL_S*ID set". Under some circumstances though, it will have
    assisted in setting the caller's version of attr to this very
    combination.
3.) 27ac0ffe ("locks: break delegations on any attribute
    modification") introduced code to handle breaking
    delegations. This can result in notify_change() being re-called. attr
    _must_ be explicitly reset to avoid triggering the BUG() established
    in #2.
4.) The path that that triggers this is via fs/open.c:chmod_common().
    The combination of attr flags set here and in the first call to
    notify_change() along with a later failed break_deleg_wait()
    results in notify_change() being called again via retry_deleg
    without resetting attr.

Solution is to move retry_deleg in chmod_common() a bit further up to
ensure attr is completely reset.

There are other places where this seemingly could occur, such as
fs/utimes.c:utimes_common(), but the attr flags are not initially
set in such a way to trigger this.

Fixes: 27ac0ffe ("locks: break delegations on any attribute modification")
Reported-by: Eric Meddaugh <etmsys@rit.edu>
Tested-by: Eric Meddaugh <etmsys@rit.edu>
Signed-off-by: Andrew Elble <aweits@rit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

On a distributed filesystem it's possible for lookup to discover that a
directory it just found is already cached elsewhere in the directory
heirarchy.  The dcache won't let us keep the directory in both places,
so we have to move the dentry to the new location from the place we
previously had it cached.

If the parent has changed, then this requires all the same locks as we'd
need to do a cross-directory rename.  But we're already in lookup
holding one parent's i_mutex, so it's too late to acquire those locks in
the right order.

The (unreliable) solution in __d_unalias is to trylock() the required
locks and return -EBUSY if it fails.

I see no particular reason for returning -EBUSY, and -ESTALE is already
the result of some other lookup races on NFS.  I think -ESTALE is the
more helpful error return.  It also allows us to take advantage of the
logic Jeff Layton added in c6a94284 "vfs: fix renameat to retry on
ESTALE errors" and ancestors, which hopefully resolves some of these
errors before they're returned to userspace.

I can reproduce these cases using NFS with:

	ssh root@$client '
		mount -olookupcache=pos '$server':'$export' /mnt/
		mkdir /mnt/TO
		mkdir /mnt/DIR
		touch /mnt/DIR/test.txt
		while true; do
			strace -e open cat /mnt/DIR/test.txt 2>&1 | grep EBUSY
		done
	'
	ssh root@$server '
		while true; do
			mv $export/DIR $export/TO/DIR
			mv $export/TO/DIR $export/DIR
		done
	'

It also helps to add some other concurrent use of the directory on the
client (e.g., "ls /mnt/TO").  And you can replace the server-side mv's
by client-side mv's that are repeatedly killed.  (If the client is
interrupted while waiting for the RENAME response then it's left with a
dentry that has to go under one parent or the other, but it doesn't yet
know which.)
Acked-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

simillar to iov_iter_fault_in_readable() but differs in that it is
not limited to faulting in the first iovec and instead faults in
"bytes" bytes iterating over the iovecs as necessary.

Also, instead of only faulting in the first and last page of the
range, all pages are faulted in.

This function is needed by NTFS when it does multi page file
writes.
Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

For one thing, LOOKUP_DIRECTORY will be dealt with in do_last().
For another, name can be an empty string, but not NULL - no callers
pass that and it would oops immediately if they would.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

flush_old_exec() has already done that.  Back on 2011 a bunch of
instances like that had been kicked out, but that hadn't taken
care of then-out-of-tree architectures, obviously, and they served
as reinfection vector...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

just make const char iname[] the last member and compare name->name with
name->iname instead of checking name->separate

We need to make sure that out-of-line name doesn't end up allocated adjacent
to struct filename refering to it; fortunately, it's easy to achieve - just
allocate that struct filename with one byte in ->iname[], so that ->iname[0]
will be inside the same object and thus have an address different from that
of out-of-line name [spotted by Boqun Feng <boqun.feng@gmail.com>]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

iovec-backed iov_iter instances are assumed to satisfy several properties:
	* no more than UIO_MAXIOV elements in iovec array
	* total size of all ranges is no more than MAX_RW_COUNT
	* all ranges pass access_ok().

The problem is, invariants of data structures should be established in the
primitives creating those data structures, not in the code using those
primitives.  And iov_iter_init() violates that principle.  For a while we
managed to get away with that, but once the use of iov_iter started to
spread, it didn't take long for shit to hit the fan - missed check in
sys_sendto() had introduced a roothole.

We _do_ have primitives for importing and validating iovecs (both native and
compat ones) and those primitives are almost always followed by shoving the
resulting iovec into iov_iter.  Life would be considerably simpler (and safer)
if we combined those primitives with initializing iov_iter.

That gives us two new primitives - import_iovec() and compat_import_iovec().
Calling conventions:
	iovec = iov_array;
	err = import_iovec(direction, uvec, nr_segs,
			   ARRAY_SIZE(iov_array), &iovec,
			   &iter);
imports user vector into kernel space (into iov_array if it fits, allocated
if it doesn't fit or if iovec was NULL), validates it and sets iter up to
refer to it.  On success 0 is returned and allocated kernel copy (or NULL
if the array had fit into caller-supplied one) is returned via iovec.
On failure all allocations are undone and -E... is returned.  If the total
size of ranges exceeds MAX_RW_COUNT, the excess is silently truncated.

compat_import_iovec() expects uvec to be a pointer to user array of compat_iovec;
otherwise it's identical to import_iovec().

Finally, import_single_range() sets iov_iter backed by single-element iovec
covering a user-supplied range -

	err = import_single_range(direction, address, size, iovec, &iter);

does validation and sets iter up.  Again, size in excess of MAX_RW_COUNT gets
silently truncated.

Next commits will be switching the things up to use of those and reducing
the amount of iov_iter_init() instances.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

all callers were passing it ->name of some struct filename
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull networking fixes from David Miller:

 1) Validate iov ranges before feeding them into iov_iter_init(), from
    Al Viro.

 2) We changed copy_from_msghdr_from_user() to zero out the msg_namelen
    is a NULL pointer is given for the msg_name.  Do the same in the
    compat code too.  From Catalin Marinas.

 3) Fix partially initialized tuples in netfilter conntrack helper, from
    Ian Wilson.

 4) Missing continue; statement in nft_hash walker can lead to crashes,
    from Herbert Xu.

 5) tproxy_tg6_check looks for IP6T_INV_PROTO in ->flags instead of
    ->invflags, fix from Pablo Neira Ayuso.

 6) Incorrect memory account of TCP FINs can result in negative socket
    memory accounting values.  Fix from Josh Hunt.

 7) Don't allow virtual functions to enable VLAN promiscuous mode in
    be2net driver, from Vasundhara Volam.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  netfilter: nft_compat: set IP6T_F_PROTO flag if protocol is set
  cx82310_eth: wait for firmware to become ready
  net: validate the range we feed to iov_iter_init() in sys_sendto/sys_recvfrom
  net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour
  be2net: use PCI MMIO read instead of config read for errors
  be2net: restrict MODIFY_EQ_DELAY cmd to a max of 8 EQs
  be2net: Prevent VFs from enabling VLAN promiscuous mode
  tcp: fix tcp fin memory accounting
  ipv6: fix backtracking for throw routes
  net: ethernet: pcnet32: Setup the SRAM and NOUFLO on Am79C97{3, 5}
  ipv6: call ipv6_proxy_select_ident instead of ipv6_select_ident in udp6_ufo_fragment
  netfilter: xt_TPROXY: fix invflags check in tproxy_tg6_check()
  netfilter: restore rule tracing via nfnetlink_log
  netfilter: nf_tables: allow to change chain policy without hook if it exists
  netfilter: Fix potential crash in nft_hash walker
  netfilter: Zero the tuple in nfnl_cthelper_parse_tuple()

Pull sparc fixes from David Miller:
 "Some perf bug fixes from David Ahern, and the fix for that nasty
  memmove() bug"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix several bugs in memmove().
  sparc: Touch NMI watchdog when walking cpus and calling printk
  sparc: perf: Add support M7 processor
  sparc: perf: Make counting mode actually work
  sparc: perf: Remove redundant perf_pmu_{en|dis}able calls

Firstly, handle zero length calls properly.  Believe it or not there
are a few of these happening during early boot.

Next, we can't just drop to a memcpy() call in the forward copy case
where dst <= src.  The reason is that the cache initializing stores
used in the Niagara memcpy() implementations can end up clearing out
cache lines before we've sourced their original contents completely.

For example, considering NG4memcpy, the main unrolled loop begins like
this:

     load   src + 0x00
     load   src + 0x08
     load   src + 0x10
     load   src + 0x18
     load   src + 0x20
     store  dst + 0x00

Assume dst is 64 byte aligned and let's say that dst is src - 8 for
this memcpy() call.  That store at the end there is the one to the
first line in the cache line, thus clearing the whole line, which thus
clobbers "src + 0x28" before it even gets loaded.

To avoid this, just fall through to a simple copy only mildly
optimized for the case where src and dst are 8 byte aligned and the
length is a multiple of 8 as well.  We could get fancy and call
GENmemcpy() but this is good enough for how this thing is actually
used.
Reported-by: David Ahern <david.ahern@oracle.com>
Reported-by: Bob Picco <bpicco@meloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull bugfix for md from Neil Brown:
 "One fix for md in 4.0-rc4

  Regression in recent patch causes crash on error path"

* tag 'md/4.0-rc4-fix' of git://neil.brown.name/md:
  md: fix problems with freeing private data after ->run failure.

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree,
they are:

1) Fix missing initialization of tuple structure in nfnetlink_cthelper
   to avoid mismatches when looking up to attach userspace helpers to
   flows, from Ian Wilson.

2) Fix potential crash in nft_hash when we hit -EAGAIN in
   nft_hash_walk(), from Herbert Xu.

3) We don't need to indicate the hook information to update the
   basechain default policy in nf_tables.

4) Restore tracing over nfnetlink_log due to recent rework to
   accomodate logging infrastructure into nf_tables.

5) Fix wrong IP6T_INV_PROTO check in xt_TPROXY.

6) Set IP6T_F_PROTO flag in nft_compat so we can use SYNPROXY6 and
   REJECT6 from xt over nftables.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull driver core fixes from Greg KH:
 "Here are two bugfixes for things reported.  One regression in kernfs,
  and another issue fixed in the LZ4 code that was fixed in the
  "upstream" codebase that solves a reported kernel crash

  Both have been in linux-next for a while"

* tag 'driver-core-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  LZ4 : fix the data abort issue
  kernfs: handle poll correctly on 'direct_read' files.

Pull char/misc fixes from Greg KH:
 "Here are three fixes for 4.0-rc5 that revert 3 PCMCIA patches that
  were merged in 4.0-rc1 that cause regressions.  So let's revert them
  for now and they will be reworked and resent sometime in the future.

  All have been tested in linux-next for a while"

* tag 'char-misc-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Revert "pcmcia: add a new resource manager for non ISA systems"
  Revert "pcmcia: fix incorrect bracketing on a test"
  Revert "pcmcia: add missing include for new pci resource handler"

Pull staging driver fixes from Greg KH:
 "Here are four small staging driver fixes, all for the vt6656 and
  vt6655 drivers, that resolve some reported issues with them.

  All of these patches have been in linux next for a while"

* tag 'staging-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  vt6655: Fix late setting of byRFType.
  vt6655: RFbSetPower fix missing rate RATE_12M
  staging: vt6656: vnt_rf_setpower: fix missing rate RATE_12M
  staging: vt6655: vnt_tx_packet fix dma_idx selection.

Pull tty/serial driver fix from Greg KH:
 "Here's a single 8250 serial driver that fixes a reported deadlock with
  the serial console and the tty driver.

  It's been in linux-next for a while now"

* tag 'tty-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_dw: Fix deadlock in LCR workaround

Pull USB / PHY driver fixes from Greg KH:
 "Here's a number of USB and PHY driver fixes for 4.0-rc5.

  The largest thing here is a revert of a gadget function driver patch
  that removes 500 lines of code.  Other than that, it's a number of
  reported bugs fixes and new quirk/id entries.

  All have been in linux-next for a while"

* tag 'usb-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
  usb: common: otg-fsm: only signal connect after switching to peripheral
  uas: Add US_FL_NO_ATA_1X for Initio Corporation controllers / devices
  USB: ehci-atmel: rework clk handling
  MAINTAINERS: add entry for USB OTG FSM
  usb: chipidea: otg: add a_alt_hnp_support response for B device
  phy: omap-usb2: Fix missing clk_prepare call when using old dt name
  phy: ti/omap: Fix modalias
  phy: core: Fixup return value of phy_exit when !pm_runtime_enabled
  phy: miphy28lp: Convert to devm_kcalloc and fix wrong sizof
  phy: miphy365x: Convert to devm_kcalloc and fix wrong sizeof
  phy: twl4030-usb: Remove redundant assignment for twl->linkstat
  phy: exynos5-usbdrd: Fix off-by-one valid value checking for args->args[0]
  phy: Find the right match in devm_phy_destroy()
  phy: rockchip-usb: Fixup rockchip_usb_phy_power_on failure path
  phy: ti-pipe3: Simplify ti_pipe3_dpll_wait_lock implementation
  phy: samsung-usb2: Remove NULL terminating entry from phys array
  phy: hix5hd2-sata: Check return value of platform_get_resource
  phy: exynos-dp-video: Kill exynos_dp_video_phy_pwr_isol function
  Revert "usb: gadget: zero: Add support for interrupt EP"
  Revert "xhci: Clear the host side toggle manually when endpoint is 'soft reset'"
  ...