- 04 Sep, 2013 38 commits
-
-
Jason Wang authored
We used to poll vhost queue before making DMA is done, this is racy if vhost thread were waked up before marking DMA is done which can result the signal to be missed. Fix this by always polling the vhost thread before DMA is done. Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason Wang authored
Currently, even if the packet length is smaller than VHOST_GOODCOPY_LEN, if upend_idx != done_idx we still set zcopy_used to true and rollback this choice later. This could be avoided by determining zerocopy once by checking all conditions at one time before. Signed-off-by:
-
Jason Wang authored
Let vhost_add_used() to use vhost_add_used_n() to reduce the code duplication. To avoid the overhead brought by __copy_to_user(). We will use put_user() when one used need to be added. Signed-off-by:
-
Jason Wang authored
We tend to batch the used adding and signaling in vhost_zerocopy_callback() which may result more than 100 used buffers to be updated in vhost_zerocopy_signal_used() in some cases. So switch to use vhost_add_used_and_signal_n() to avoid multiple calls to vhost_add_used_and_signal(). Which means much less times of used index updating and memory barriers. 2% performance improvement were seen on netperf TCP_RR test. Signed-off-by:
-
Jason Wang authored
None of its caller use its return value, so let it return void. Signed-off-by:
-
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using pci_dev instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct pci_dev. This is a purely cosmetic change. Signed-off-by:Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using pci_dev instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct pci_dev. This is a purely cosmetic change. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. This is a purely cosmetic change. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. This is a purely cosmetic change. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. This is a purely cosmetic change. Signed-off-by: -
Joe Perches authored
This function is being removed, so remove the reference to it. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
This function is being removed, rename the reference. Signed-off-by:
Antonio Quartulli <ordex@autistici.org> Signed-off-by:
-
Joe Perches authored
Convert the llc_<foo> static inlines to the equivalents from etherdevice.h and remove the llc_<foo> static inline functions. llc_mac_null -> is_zero_ether_addr llc_mac_multicast -> is_multicast_ether_addr llc_mac_match -> ether_addr_equal Signed-off-by:
-
Joe Perches authored
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: (and a little typing) $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by:
-
Liu Junliang authored
Signed-off-by:
Liu Junliang <liujunliang_ljl@163.com> Signed-off-by:
-
Ajit Khaparde authored
SkyHawk-R can support VEB or VEPA mode. This patch will allow the user to set/query this switch setting. Signed-off-by:
Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by:
-
Florian Fainelli authored
The name of the function in the comment is __skb_alloc_page() while we are actually commenting __skb_alloc_pages(). Fix this typo and make it a valid kernel doc comment. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Claudiu Manoil authored
Fix the amount of sent bytes reported to BQL by reporting the number of bytes on wire in the xmit routine, and recording that value for each skb in order to be correctly confirmed on Tx confirmation cleanup. Reporting skb->len to BQL just before exiting xmit is not correct due to possible insertions of TOE block and alignment bytes in the skb->data, which are being stripped off by the controller before transmission on wire. This led to mismatch of (incorrectly) reported bytes to BQL b/w xmit and Tx confirmation, resulting in Tx timeout firing, for the h/w tx timestamping acceleration case. There's no easy way to obtain the number of bytes on wire in the Tx confirmation routine, so skb->cb is used to convey that information from xmit to Tx confirmation, for now (as proposed by Eric). Revived the currently unused GFAR_CB() construct for that purpose. Signed-off-by:
Claudiu Manoil <claudiu.manoil@freescale.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Dan Aloni authored
When my 'ifup eth' script was fired multiple times and ran concurrent on my laptop, for some obscure /etc scripting reason, it was revealed that the store_enabled() function in netconsole doesn't handle it nicely, as recorded by the Oops below (a syslog paste, but not mangled too much to prevent from discerning the traceback). On Linux 3.10.4, this patch seeks to remedy the problem, and it has been running stable on my laptop for a few days. [52608.609325] BUG: unable to handle kernel NULL pointer dereference at 00000000000003e0 [52608.609331] IP: [<ffffffff81532a17>] __netpoll_cleanup+0x27/0xe0 [52608.609339] PGD 15e51a067 PUD 15433e067 PMD 0 [52608.609343] Oops: 0000 [#1] SMP re firewire_ohci firewire_core crc_itu_t [last unloaded: kvm_intel] [52608.609347] Modules linked in: kvm_intel tun vfat fat ppdev parport_pc parport fuse ipt_MASQUERADE usb_storage nf_conntrack_netbios_ns nf_conn [..garbled..] [52608.609433] RAX: 0000000000000000 RBX: ffff880210bbcc68 RCX: 0000000000000000 [52608.609435] RDX: 0000000000000000 RSI: ffff8801ba447da0 RDI: ffff880210bbcc68 [52608.609437] RBP: ffff8801ba447e18 R08: 0000000000000000 R09: 0000000000000001 [52608.609439] R10: 000000000000000a R11: f000000000000000 R12: ffff880210bbcc68 [52608.609441] R13: ffff88020bc41000 R14: 0000000000000002 R15: 000000000000000200000000000 [52608.609443] FS: 00007f38d7bff740(0000) GS:ffff88021dc40000(0000) knlGS:0000000000000000 [52608.609446] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003300000000001427e0 [52608.609448] CR2: 00000000000003e0 CR3: 0000000154103000 CR4: 00000000001427e0 [52608.609450] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [52608.609452] netpoll: netconsole: local port 6665ess 10.0.0.27 [52608.609454] netpoll: netconsole: local IPv4 address 10.0.0.27 [52608.609456] netpoll: netconsole: interface 'em1' [52608.609457] netpoll: netconsole: remote port 514ress 10.0.0.15 [52608.609459] netpoll: netconsole: remote IPv4 address 10.0.0.15:65:a8:9a:c7 [52608.609461] netpoll: netconsole: remote ethernet address 1c:6f:65:a8:9a:c7 [52608.609463] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [52608.609464] Stack:801ba447e08 ffff880210bbcc68 ffffffffffffffea ffff88020bc41000 [52608.609466] ffff8801ba447e08 ffff880210bbcc68 ffffffffffffffea ffff88020bc41000 [52608.609471] 0000000000000002 0000000000000002 ffff8801ba447e38 ffffffff81532af4 [52608.609475] 0000000000000000 ffff880210bbcc00 ffff8801ba447e78 ffffffff81420e7c [52608.609479] Call Trace: [52608.609484] [<ffffffff81532af4>] netpoll_cleanup+0x24/0x50 [52608.609489] [<ffffffff81420e7c>] store_enabled+0x5c/0xe0 [52608.609492] [<ffffffff81420abe>] netconsole_target_attr_store+0x2e/0x40 [52608.609498] [<ffffffff811ff2a2>] configfs_write_file+0xd2/0x130 [52608.609503] [<ffffffff81188f95>] vfs_write+0xc5/0x1f0 [52608.609506] [<ffffffff81189482>] SyS_write+0x52/0xa0/0x10 [52608.609511] [<ffffffff81628c2e>] ? do_page_fault+0xe/0x10 [52608.609516] [<ffffffff8162d402>] system_call_fastpath+0x16/0x1b [52608.609517] Code: 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 30 4c 89 65 e0 48 89 5d d8 49 89 fc 4c 89 6d e8 4c 89 75 f0 4c 89 7d f8 48 8 [..garbled..] [52608.609559] RIP [<ffffffff81532a17>] __netpoll_cleanup+0x27/0xe0 [52608.609563] RSP <ffff8801ba447de8> [52608.609564] CR2: 00000000000003e0 [52608.609567] ---[ end trace d25ec343349b61d2 ]--- Signed-off-by:
Dan Aloni <alonid@postram.com> Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Kouei Abe authored
This corrects an oversight when r8a7790 support was added to sh_eth. Signed-off-by:
Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Kouei Abe authored
Signed-off-by:
-
Veaceslav Falico authored
Store VID in ->vlan_id (if any), and remove the useless ->tag. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
-
Veaceslav Falico authored
We're using it currently to verify if we have vlans before getting the tag from the skb we're about to send. It's useless because the vlan_get_tag() verifies if the skb has the tag (and returns an error if not), and we can receive tagged skbs only if we *already* have vlans. Plus, the current RCUed implementation is kind of useless anyway - the we can remove the last vlan in the moment we return from the function. So remove the only usage of it and the whole function. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
git://gitorious.org/linux-can/linux-can-nextDavid S. Miller authored
Marc Kleine-Budde says: ==================== this is a pull request for net-next. There are two patches from Gerhard Sittig, which improves the clock handling on mpc5121. Oliver Hartkopp provides a patch that adds a per rule limitation of frame hops. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-nextDavid S. Miller authored
John W. Linville says: ==================== Please accept this batch of updates intended for the 3.12 stream. For the mac80211 bits, Johannes says this: "This time I have various improvements all over the place: IBSS, mesh, testmode, AP client powersave handling, one of the rare rfkill patches and some code cleanup." Also for mac80211: "And I also have some more changes for -next, just a few small fixes and improvements, nothing really stands out." And for iwlwifi: "This time I have some powersave work (notably uAPSD support), CQM offloads, support for a new firmware API and various code cleanups." Regarding the Bluetooth bits, Gustavo says: "Patches to 3.12, here we have: * implementation of a proper tty_port for RFCOMM devices, this fixes some issues people were seeing lately in the kernel. * Add voice_setting option for SCO, it is used for SCO Codec selection * bugfixes, small improvements and clean ups" For the NFC bits, Samuel says: "With this one we have: - A few pn533 improvements and minor fixes. Testing our pn533 driver against Google's NCI stack triggered a few issues that we fixed now. We also added Tx fragmentation support to this driver. - More NFC secure element handling. We added a GET_SE netlink command for getting all the discovered secure elements, and we defined 2 additional secure element netlink event (transaction and connectivity). We also fixed a couple of typos and copy-paste bugs from the secure element handling code. - Firmware download support for the pn544 driver. This chipset can enter a special mode where it's waiting for firmware blobs to replace the already flashed one. We now support that mode." With repect to the ath tree, Kalle says: "New features in ath10k are rx/tx checsumming in hw and survey scan implemented by Michal. Also he made fixes to different areas of the driver, most notable being fixing the case when using two streams and reducing the number of interface combinations to avoid firmware crashes. Bartosz did a clean related to how we handle SoC power save in PCI layer. For ath6kl Mohammed and Vasanth sent each a patch to fix two infrequent crashes." I also pulled the wireless tree into wireless-next to support a request from Johannes. On top of all that, there are the usual sort of driver updates. The mwifiex, brcmfmac, brcmsmac, ath9k, and rt2x00 drivers all get some attention, as does the bcma bus and a few other random bits here and there. ==================== Signed-off-by: -
Daniel Borkmann authored
This is a follow-up commit for commit b1dcdc68 ("net: tcp_probe: allow more advanced ingress filtering by mark") that allows for advanced SCTP probe module filtering based on skb mark (for a more detailed description and advantages using mark, refer to b1dcdc68). The current option to filter by a given port is still being preserved. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
-
Tim Gardner authored
This config option is superfluous in that it only guards a call to neigh_app_ns(). Enabling CONFIG_ARPD by default has no change in behavior. There will now be call to __neigh_notify() for each ARP resolution, which has no impact unless there is a user space daemon waiting to receive the notification, i.e., the case for which CONFIG_ARPD was designed anyways. Suggested-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Gao feng <gaofeng@cn.fujitsu.com> Cc: Joe Perches <joe@perches.com> Cc: Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Reviewed-by:
-
Thomas Huth authored
If the VIRTIO_NET_F_GUEST_CSUM virtio feature is available, the guest does not have to calculate the checksums on all received packets. This is pretty much the same feature as RX checksum offloading on real network cards, so the virtio-net driver should report this by setting the NETIF_F_RXCSUM flag. When the user now runs "ethtool -k", he or she can see whether the virtio-net interface has to calculate RX checksums or not. Signed-off-by:
Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
David S. Miller authored
Bjørn Mork says: ==================== net: set addr_assign_type when inheriting a dev_addr Copying the dev_addr from a parent device is an operation common to a number of drivers. The addr_assign_type should be updated accordingly, either by reusing the value from the source device or explicitly indicating that the address is stolen by setting addr_assign_type to NET_ADDR_STOLEN. This patch set adds a helper copying both the dev_addr and the addr_assign_type, and use this helper in drivers which don't currently set the addr_assign_type. Using NET_ADDR_STOLEN might be more appropriate in some of these cases. Please let me know, and I'll update the patch accordingly. Changes in v2: - assuming addr_len == ETH_ALEN to allow optimized memcpy - dropped the vt6656 patch due to addr_len being unset in that driver ==================== Signed-off-by: -
Bjørn Mork authored
A device inheriting a random or set address should reflect this in its addr_assign_type. Cc: Forest Bond <forest@alittletooquiet.net> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Bjørn Mork authored
A device inheriting a random or set address should reflect this in its addr_assign_type. Acked-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Bjørn Mork authored
A device inheriting a random or set address should reflect this in its addr_assign_type. Cc: Jouni Malinen <j@w1.fi> Signed-off-by:
-
Bjørn Mork authored
A device inheriting a random or set address should reflect this in its addr_assign_type. Acked-by:
-
Bjørn Mork authored
A device inheriting a random or set address should reflect this in its addr_assign_type. Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Bjørn Mork authored
A device inheriting a random or set address should reflect this in its addr_assign_type. Cc: Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Bjørn Mork authored
A device inheriting a random or set address should reflect this in its addr_assign_type. Signed-off-by:
-
Bjørn Mork authored
A device inheriting a random or set address should reflect this in its addr_assign_type. Cc: Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Bjørn Mork authored
Some etherdevices inherit their address from a parent or master device. The addr_assign_type should be updated along with the address in these cases. Adding a helper function to simplify this. Signed-off-by:
-
- 03 Sep, 2013 2 commits
-
-
Cong Wang authored
Fengguang reported: net/built-in.o: In function `in6_dev_finish_destroy': (.text+0x4ca7d): undefined reference to `snmp_mib_free' this is due to snmp_mib_free() is defined when CONFIG_INET is enabled, but in6_dev_finish_destroy() is now moved to core kernel. I think snmp_mib_free() is small enough to be inlined, so just make it static inline. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Cong Wang <amwang@redhat.com> Signed-off-by:
-
Cong Wang authored
Fengguang reported a compile warning: drivers/net/vxlan.c: In function 'vxlan6_xmit_skb': drivers/net/vxlan.c:1352:3: error: implicit declaration of function 'csum_ipv6_magic' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors this patch fixes it. Reported-by:
-
