When setting the operational mode, some third party (Speedlink Strike-FX)
gamepads refuse the output report. Failing here means we refuse to
initialize the gamepad while this should be harmless.

The weird part is that the initial commit that added this: a7de9b86
("HID: sony: Enable Gasia third-party PS3 controllers") mentions this
very same controller as one requiring this output report.
Anyway, it's broken for one user at least, so let's change it.
We will report an error, but at least the controller should work.

And no, these devices present themselves as legacy Sony controllers
(VID:PID of 054C:0268, as in the official ones) so there are no ways
of discriminating them from the official ones.

https://bugzilla.redhat.com/show_bug.cgi?id=1255325Reported-and-tested-by: Max Fedotov <thesourcehim@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID updates from Jiri Kosina:

 - appoint Benjamin Tissoires as co-maintainer / designated reviewer

 - sysfs report_descriptor visibility fix for unclaimed devices, from
   Andy Lutomirski

 - suspend/resume fixes for Sony driver from Frank Praznik

 - IRQ deadlock fix from Ioan-Adrian Ratiu

 - hid-i2c fixes affecting (at least) Yoga 900 from Mika Westerberg and
   Srinivas Pandruvada

 - a lot of new device support (especially, but not limited to, Wacom)
   and assorted small misc fixes

 - almost complete G920 support; the only bit that is missing is
   switching the device to HID mode automatically; Simon Wood and Michal
   Maly are working on it.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (46 commits)
  Revert "INPUT: xpad: switch Logitech G920 Wheel into HID mode"
  HID: sensor-hub: Add quirk for Lenovo Yoga 900 with ITE Chips
  HID: Add new PID for Microchip Pick16F1454
  HID: wacom: Use correct report to query pen ID from INTUOSHT2 devices
  HID: i2c-hid: Prevent sending reports from racing with device reset
  HID: use kobj_to_dev()
  HID: wiimote: use dev_to_wii()
  HID: add a new helper to_hid_driver()
  HID: use to_hid_device()
  HID: move to_hid_device() to hid.h
  HID: usbhid: use to_usb_device
  HID: corsair: Convert to use module_hid_driver
  HID: input: ignore the battery in OKLICK Laser BTmouse
  HID: wacom: Fix pad button range for CINTIQ_COMPANION_2
  HID: wacom: Fix touchring value reporting
  HID: wacom: Report 'strip2' values in ABS_RY
  HID: wacom: Limit touchstrip data to 13 bits
  HID: wacom: bitwise vs logical ORs
  HID: wacom: Apply lowres quirk to BAMBOO_TOUCH devices
  HID: enable hid device to suspend/resume asynchronously
  ...

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Stable fixes:
   - Fix a regression in the SunRPC socket polling code
   - Fix the attribute cache revalidation code
   - Fix race in __update_open_stateid()
   - Fix an lo->plh_block_lgets imbalance in layoutreturn
   - Fix an Oopsable typo in ff_mirror_match_fh()

  Features:
   - pNFS layout recall performance improvements.
   - pNFS/flexfiles: Support server-supplied layoutstats sampling period

  Bugfixes + cleanups:
   - NFSv4: Don't perform cached access checks before we've OPENed the
     file
   - Fix starvation issues with background flushes
   - Reclaim writes should be flushed as unstable writes if there are
     already entries in the commit lists
   - Various bugfixes from Chuck to fix NFS/RDMA send queue ordering
     problems
   - Ensure that we propagate fatal layoutget errors back to the
     application
   - Fixes for sundry flexfiles layoutstats bugs
   - Fix files/flexfiles to not cache invalidated layouts in the DS
     commit buckets"

* tag 'nfs-for-4.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (68 commits)
  NFS: Fix a compile warning about unused variable in nfs_generic_pg_pgios()
  NFSv4: Fix a compile warning about no prototype for nfs4_ioctl()
  NFS: Use wait_on_atomic_t() for unlock after readahead
  SUNRPC: Fixup socket wait for memory
  NFSv4.1/pNFS: Cleanup constify struct pnfs_layout_range arguments
  NFSv4.1/pnfs: Cleanup copying of pnfs_layout_range structures
  NFSv4.1/pNFS: Cleanup pnfs_mark_matching_lsegs_invalid()
  NFSv4.1/pNFS: Fix a race in initiate_file_draining()
  NFSv4.1/pNFS: pnfs_error_mark_layout_for_return() must always return layout
  NFSv4.1/pNFS: pnfs_mark_matching_lsegs_return() should set the iomode
  NFSv4.1/pNFS: Use nfs4_stateid_copy for copying stateids
  NFSv4.1/pNFS: Don't pass stateids by value to pnfs_send_layoutreturn()
  NFS: Relax requirements in nfs_flush_incompatible
  NFSv4.1/pNFS: Don't queue up a new commit if the layout segment is invalid
  NFS: Allow multiple commit requests in flight per file
  NFS/pNFS: Fix up pNFS write reschedule layering violations and bugs
  SUNRPC: Fix a missing break in rpc_anyaddr()
  pNFS/flexfiles: Fix an Oopsable typo in ff_mirror_match_fh()
  NFS: Fix attribute cache revalidation
  NFS: Ensure we revalidate attributes before using execute_ok()
  ...

Pull vfs fix from Al Viro:
 "Don't put symlink bodies in pagecache into highmem"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Make sure that highmem pages are not added to symlink page cache

inode_nohighmem() is sufficient to make sure that page_get_link()
won't try to allocate a highmem page.  Moreover, it is sufficient
to make sure that page_symlink/__page_symlink won't do the same
thing.  However, any filesystem that manually preseeds the symlink's
page cache upon symlink(2) needs to make sure that the page it
inserts there won't be a highmem one.

Fortunately, only nfs and shmem have run afoul of that...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull x86 fixes from Ingo Molnar:
 "Misc changes:
   - fix lguest bug
   - fix /proc/meminfo output on certain configs
   - fix pvclock bug
   - fix reboot on certain iMacs by adding new reboot quirk
   - fix bootup crash
   - fix FPU boot line option parsing
   - add more x86 self-tests
   - small cleanups, documentation improvements, etc"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu/amd: Remove an unneeded condition in srat_detect_node()
  x86/vdso/pvclock: Protect STABLE check with the seqcount
  x86/mm: Improve switch_mm() barrier comments
  selftests/x86: Test __kernel_sigreturn and __kernel_rt_sigreturn
  x86/reboot/quirks: Add iMac10,1 to pci_reboot_dmi_table[]
  lguest: Map switcher text R/O
  x86/boot: Hide local labels in verify_cpu()
  x86/fpu: Disable AVX when eagerfpu is off
  x86/fpu: Disable MPX when eagerfpu is off
  x86/fpu: Disable XGETBV1 when no XSAVE
  x86/fpu: Fix early FPU command-line parsing
  x86/mm: Use PAGE_ALIGNED instead of IS_ALIGNED
  selftests/x86: Disable the ldt_gdt_64 test for now
  x86/mm/pat: Make split_page_count() check for empty levels to fix /proc/meminfo output
  x86/boot: Double BOOT_HEAP_SIZE to 64KB
  x86/mm: Add barriers and document switch_mm()-vs-flush synchronization

Pull timer fixes from Ingo Molnar:
 "Three clocksource driver fixes"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/vt8500: Increase the minimum delta
  clocksource/drivers/fsl_ftm_timer: Fix CLKSRC_MMIO dependency
  clocksource/drivers: Fix dependencies for !HAS_IOMEM archs

Pull perf fixes from Ingo Molnar:
 "Tooling fixes, the biggest patch is one that decouples the kernel's
  list.h from tooling list.h"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  perf tools: Fallback to srcdir/Documentation/tips.txt
  perf ui/tui: Print helpline message as is
  perf tools: Set and pass DOCDIR to builtin-report.c
  perf tools: Add file_only config option to strlist
  perf tools: Add more usage tips
  perf record: Add --buildid-all option
  tools subcmd: Add missing NORETURN define for parse-options.h
  tools: Fix formatting of the "make -C tools" help message
  tools: Make list.h self-sufficient
  perf tools: Fix mmap2 event allocation in synthesize code
  perf stat: Fix recort_usage typo
  perf test: Reset err after using it hold errcode in hist testcases
  perf test: Fix false TEST_OK result for 'perf test hist'
  tools build: Add BPF feature check to test-all
  perf bpf: Fix build breakage due to libbpf
  tools: Move Makefile.arch from perf/config to tools/scripts
  perf tools: Fix PowerPC native building
  perf tools: Fix phony build target for build-test
  perf tools: Add -lutil in python lib list for broken python-config
  perf tools: Add missing sources to perf's MANIFEST
  ...

Pull i2c updates from Wolfram Sang:
 "Quite some driver updates:
   - piix4 can now handle multiplexed adapters
   - brcmstb, xlr, eg20t, designware drivers support more SoCs
   - emev2 gained i2c slave support
   - img-scb and rcar got bigger refactoring to remove issues
   - lots of common driver updates

  i2c core changes:
   - new quirk flag when an adapter does not support clock stretching,
     so clients can be configured to avoid that if possible
   - added a helper function to retrieve timing parameters from firmware
     (with rcar being the first user)
   - "multi-master" DT binding added so drivers can adapt to this
     setting (like disabling PM to keep arbitration working)
   - RuntimePM for the logical adapter device is now always enabled by
     the core to ensure propagation from childs to the parent (the HW
     device)
   - new macro builtin_i2c_driver to reduce boilerplate"

* 'i2c/for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (70 commits)
  i2c: create builtin_i2c_driver to avoid registration boilerplate
  i2c: imx: fix i2c resource leak with dma transfer
  dt-bindings: i2c: eeprom: add another EEPROM device
  dt-bindings: move I2C eeprom descriptions to the proper file
  i2c: designware: Do not require clock when SSCN and FFCN are provided
  DT: i2c: trivial-devices: Add Epson RX8010 and MPL3115
  i2c: s3c2410: remove superfluous runtime PM calls
  i2c: always enable RuntimePM for the adapter device
  i2c: designware: retry transfer on transient failure
  i2c: ibm_iic: rename i2c_timings struct due to clash with generic version
  i2c: designware: Add support for AMD Seattle I2C
  i2c: imx: Remove unneeded comments
  i2c: st: use to_platform_device()
  i2c: designware: use to_pci_dev()
  i2c: brcmstb: Adding support for CM and DSL SoCs
  i2c: mediatek: fix i2c multi transfer issue in high speed mode
  i2c: imx: improve code readability
  i2c: imx: Improve message log when DMA is not used
  i2c: imx: add runtime pm support to improve the performance
  i2c: imx: init bus recovery info before adding i2c adapter
  ...

Pull DeviceTree updates from Rob Herring:

 - Rework and export the changeset API to make it available to users
   other than DT overlays

 - ARM secure devices binding

 - OCTEON USB binding

 - Clean-up of various SRAM binding docs

 - Various other binding doc updates

* tag 'devicetree-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (21 commits)
  drivers/of: Export OF changeset functions
  Fix documentation for adp1653 DT
  ARM: psci: Fix indentation in DT bindings
  of/platform: export of_default_bus_match_table
  of/unittest: Show broken behaviour in the platform bus
  of: fix declaration of of_io_request_and_map
  of/address: replace printk(KERN_ERR ...) with pr_err(...)
  of/irq: optimize device node matching loop in of_irq_init()
  dt-bindings: tda998x: Document the required 'port' node.
  net/macb: bindings doc: Merge cdns-emac to macb
  dt-bindings: Misc fix for the ATH79 DDR controllers
  dt-bindings: Misc fix for the ATH79 MISC interrupt controllers
  Documentation: dt: Add bindings for Secure-only devices
  dt-bindings: ARM: add arm,cortex-a72 compatible string
  ASoC: Atmel: ClassD: add GCK's parent clock in DT binding
  DT: add Olimex to vendor prefixes
  Documentation: fsl-quadspi: Add fsl,ls1021-qspi compatible string
  Documentation/devicetree: document OCTEON USB bindings
  usb: misc: usb3503: Describe better how to bind clock to the hub
  dt-bindings: Consolidate SRAM bindings from all vendors
  ...

Pull MFD updates from Lee Jones:
 "New Device Support:
   - Add support for s2mps15; sec-core
   - Add support for Lewisburg; lpc_ich
   - Add support for cs47l24 and wm1831; arizona

  New Functionality:
   - Allow user to select syscon register width; syscon

  Fix-ups:
   - Lots of Checkpatch fixes
   - Rename -pmic/-regulator; s2mps11
   - Build driver components into a single module; wm8994-*
   - Better handing of IRQ during suspend/resume; as3722
   - Constify things; da903x
   - Remove unused code; ab8500-core
   - Improve error handing; qcom_rpm
   - Simplify code: wm831x-otp, sta2x11-mfd
   - Improve locking; cros_ec_spi
   - Fix incorrect DT binding filename reference; arizona, palmas,
     snps-dwapb-gpio, wm8994

  Bug Fixes:
   - Fix broken SYSFS 'show ID' call; wm831x-otp
   - Protect reads from non-existent registers; qcom-spmi-pmic
   - Repair build warnings; as3722
   - Fix IRQ request ordering; arizona-irq
   - Ensure return value is boolean; ucb1x00-core, tps65010, tc6393xb,
     htc-egpio, dm355evm_msp, asic3"

* tag 'mfd-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (58 commits)
  mfd: davinci_voicecodec: Remove pointless 'out of memory' error message
  mfd: da9052-irq: Fix trivial 'space before comma' error
  mfd: da9052-i2c: Fix tabbing/whitespace issue
  mfd: da903x: Fix white space and split string issues
  mfd: cs5535-mfd: Add missing line spacing and make local array static
  mfd: cros_ec_spi: Repair comparison ordering issue
  mfd: cros_ec_i2c: Fix trivial 'tabs before spaces' whitespace issue.
  mfd: asic3: Fix a plethora of Checkpatch errors and warnings
  mfd: as3711: Repair OOM and 'line over 80 chars' formatting warnings
  mfd: arizona-i2c: Add blank line formatting after declaration
  mfd: arizona-core: msleep() is unreliable for anything <20ms use usleep_range() instead
  mfd: adp5520: Some trivial 'no space before tab' fixes
  mfd: ab8500-sysctrl: Fix Constify, printk => pr_info and formatting issues
  mfd: ab8500-gpadc: Squash a whole bunch of Checkpatch warnings and one error
  mfd: ab8500-debugfs: Clean-up non-conforming commenting and print formatting
  mfd: ab8500-core: Fix many warnings reported by Checkpatch
  mfd: ab2100-otp: Remove pointless 'out of memory' error message
  mfd: ab3100-core.c: Fix multiple warnings reported by Checkpatch
  mfd: aat2870-core: Remove unnecessary 'out of memory' message
  mfd: 88pm860x-core: Fix commenting and declaration spacing
  ...

Pull power supply and reset updates from Sebastian Reichel:
 "I have mostly fixes in the power-supply tree for the 4.5 kernel.  I
  should mention, that the top-most commit has not been in next, but
  it's a fix changing only a single register offset.

  Summary:

   - uncouple CONFIG_POWER_RESET from CONFIG_POWER_SUPPLY

   - misc fixes"

* tag 'for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: bq27xxx_battery: Fix bq27541 AveragePower register address
  power: test_power: correctly handle empty writes
  power: generic-adc-battery: use to_delayed_work
  power: isp1704_charger: Fix isp1704_write() definition
  power: bq27xxx: fix register numbers of bq27500
  power: bq27xxx: fix reading for bq27000 and bq27010
  power: Fix unmet dependency on POWER_SUPPLY by POWER_RESET by uncoupling them
  power: bq27xxx_battery: Reorganize I2C into a module
  power: bq27xxx: don't fill system log by missing battery
  power: max8903_charger: set IRQF_ONESHOT if no primary handler is specified
  power/reset: at91-reset: add missing of_node_put
  power: ds2782_battery: constify ds278x_battery_ops structure
  power: bq2415x_charger: Delete unnecessary checks before the function call "of_node_put"

Pull HSI updates from Sebastian Reichel:
 "Misc fixes"

* tag 'hsi-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: omap_ssi_port: fix handling of_get_named_gpio result
  HSI: omap_ssi: fix handling ida_simple_get result
  HSI: Remove struct hsi_client private fields from kernel-doc

Pull backlight updates from Lee Jones:
  Fix-ups:
   - Take heed of GPIO default-on requests; gpio_backlight
   - Enable DT probing; tps65217_bl

  Bug Fixes:
   - Free resources in error path; pwm_bl
   - Fix uninitialised variable warning; adp8860_bl, adp8870_bl
   - Protect unconditional DT look-ups from non-DT platforms; pwm_bl
   - Fix backlight flicker; pwm_bl

* tag 'backlight-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: pwm_bl: Free PWM requested by legacy API on error path
  backlight: adp8860: Fix another uninitialized variable use
  backlight: gpio-backlight: Use default-on on GPIO request
  backlight: pwm_bl: Fix broken PWM backlight for non-dt platforms
  backlight: tps65217_bl: Add MODULE_DEVICE_TABLE
  backlight: pwm_bl: Avoid backlight flicker when probed from DT
  backlight: adp88x0: Fix uninitialized variable use

Merge branches 'for-4.4/upstream-fixes', 'for-4.5/async-suspend', 'for-4.5/container-of-cleanups', 'for-4.5/core', 'for-4.5/i2c-hid', 'for-4.5/logitech', 'for-4.5/multitouch', 'for-4.5/sony', 'for-4.5/upstream' and 'for-4.5/wacom' into for-linus

Originally we calculated ht_nodeid as "ht_nodeid = apicid -
boot_cpu_id;" so presumably it could be negative.

But after commit:

  01aaea1a ('x86: introduce initial apicid')

we use c->initial_apicid which is an unsigned short and thus always >= 0.

It causes a static checker warning to test for impossible
conditions so let's remove it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hector Marco-Gisbert <hecmargi@upv.es>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Link: http://lkml.kernel.org/r/20160113123940.GE19993@mwandaSigned-off-by: Ingo Molnar <mingo@kernel.org>

WARNING: Possible unnecessary 'out of memory' message
+       if (!davinci_vc) {
+               dev_dbg(&pdev->dev,

total: 0 errors, 1 warnings, 154 lines checked
Signed-off-by: Lee Jones <lee.jones@linaro.org>

ERROR: space prohibited before that ',' (ctx:WxW)
+       da9052_free_irq(da9052, DA9052_IRQ_ADC_EOM , da9052);

total: 1 errors, 0 warnings, 290 lines checked

Cc: Support Opensource <support.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: suspect code indent for conditional statements (8, 24)
+       if (!i2c_safe_reg(reg))
+                       return regmap_read(da9052->regmap,

total: 0 errors, 1 warnings, 226 lines checked

Cc: Support Opensource <support.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

While we're at it, let's also match the MODULE_LICENSE with the header.

WARNING: please, no space before tabs
+ * ^IMike Rapoport <mike@compulab.co.il>$

WARNING: please, no space before tabs
+ * ^IEric Miao <eric.miao@marvell.com>$

WARNING: quoted string split across lines
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"
+             "Mike Rapoport <mike@compulab.co.il>");

total: 0 errors, 3 warnings, 574 lines checked

Cc: Support Opensource <support.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: Missing a blank line after declarations
+       struct resource *res;
+       res = platform_get_resource(pdev, IORESOURCE_IO, 0);

WARNING: char * array declaration might be better as static const
+       const char *acpi_clones[] = { "olpc-xo1-pm-acpi", "olpc-xo1-sci-acpi" };

total: 0 errors, 2 warnings, 192 lines checked
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: Comparisons should place the constant on the right side of the test
+       BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size);

WARNING: Comparisons should place the constant on the right side of the test
+       BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size);

total: 0 errors, 2 warnings, 731 lines checked
Signed-off-by: Lee Jones <lee.jones@linaro.org>

ERROR: code indent should use tabs where possible
+ ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$

WARNING: please, no space before tabs
+ ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$

WARNING: please, no spaces at the start of a line
+ ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$

total: 1 errors, 2 warnings, 366 lines checked
Signed-off-by: Lee Jones <lee.jones@linaro.org>

ERROR: Macros with complex values should be enclosed in parentheses
+#define INIT_CDEX(_name, _rate)        \
+       [ASIC3_CLOCK_##_name] = {               \
+               .cdex = CLOCK_CDEX_##_name,     \
+               .rate = _rate,                  \
+       }

WARNING: line over 80 characters
+                                                           ASIC3_GPIO_INT_STATUS);

WARNING: void function return statements are not generally useful
+       return;
+}

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(1);
WARNING: line over 80 characters
+               asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) +

WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then p
r_err(...  to printk(KERN_ERR ...
+               printk(KERN_ERR "kzalloc failed\n");

WARNING: Possible unnecessary 'out of memory' message
+       if (asic == NULL) {
+               printk(KERN_ERR "kzalloc failed\n");

WARNING: Missing a blank line after declarations
+       int retval = 0;
+       retval = platform_driver_probe(&asic3_device_driver, asic3_probe);

total: 1 errors, 13 warnings, 1081 lines checked
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: Possible unnecessary 'out of memory' message
+               if (!pdata) {
+                       dev_err(&client->dev, "Failed to allocate pdata\n");

WARNING: Possible unnecessary 'out of memory' message
+       if (!as3711) {
+               dev_err(&client->dev, "Memory allocation failed\n");

WARNING: line over 80 characters
+               dev_err(&client->dev, "regmap initialization failed: %d\n", ret);

WARNING: line over 80 characters
+       /* We can reuse as3711_subdevs[], it will be copied in mfd_add_devices() */

WARNING: line over 80 characters
+               as3711_subdevs[AS3711_REGULATOR].platform_data = &pdata->regulator;

WARNING: line over 80 characters
+               as3711_subdevs[AS3711_REGULATOR].pdata_size = sizeof(pdata->regulator);

WARNING: line over 80 characters
+               as3711_subdevs[AS3711_BACKLIGHT].platform_data = &pdata->backlight;

WARNING: line over 80 characters
+               as3711_subdevs[AS3711_BACKLIGHT].pdata_size = sizeof(pdata->backlight);

total: 0 errors, 8 warnings, 236 lines checked
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: Missing a blank line after declarations
+       struct arizona *arizona = dev_get_drvdata(&i2c->dev);
+       arizona_dev_exit(arizona);

total: 0 errors, 1 warnings, 120 lines checked

Cc: patches@opensource.wolfsonmicro.com
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+                       msleep(5);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(1);

total: 0 errors, 4 warnings, 1407 lines checked

Cc: patches@opensource.wolfsonmicro.com
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: please, no space before tabs
+ * ^IMike Rapoport <mike@compulab.co.il>$

WARNING: please, no space before tabs
+ * ^IEric Miao <eric.miao@marvell.com>$

WARNING: please, no space before tabs
+^I.id_table ^I= adp5520_id,$

total: 0 errors, 3 warnings, 365 lines checked

Cc: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: char * array declaration might be better as static const
+       static char *pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"};

WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then
 pr_info(...  to printk(KERN_INFO ...
+                       printk(KERN_INFO

WARNING: quoted string split across lines
+                              "Charger \"%s\" is connected with known battery."
+                              " Rebooting.\n",

WARNING: quoted string split across lines
+                                       "unable to set sysClkReq%dRfClkBuf: "
+                                       "%d\n", j + 1, ret);

total: 0 errors, 4 warnings, 199 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: line over 80 characters
+#define ADC_CH_IBAT_MIN                        (-6000) /* mA range measured by ADC for ib
t*/

WARNING: line over 80 characters
+#define ADC_CH_IBAT_MIN_V              (-60)   /* mV range measured by ADC for ibat*/

WARNING: suspect code indent for conditional statements (16, 20)
+               if (!strcmp(name, dev_name(gpadc->dev)))
+                   return gpadc;

WARNING: suspect code indent for conditional statements (0, 16)
+if (ad_value < 0) {
+               dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n",

WARNING: quoted string split across lines
+               dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
+                       " %d AD: 0x%x\n", channel, ad_value);

WARNING: Missing a blank line after declarations
+       int raw_data;
+       raw_data = ab8500_gpadc_double_read_raw(gpadc, channel,

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(10);

ERROR: else should follow close brace '}'
+       }
+       else

WARNING: line over 80 characters
+                       delay_max = 10000; /* large range to optimise sleep mode */

WARNING: line over 80 characters
+                       gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain;

WARNING: line over 80 characters
+       gpadc = devm_kzalloc(&pdev->dev, sizeof(struct ab8500_gpadc), GFP_KERNEL);

WARNING: Possible unnecessary 'out of memory' message
+       if (!gpadc) {
+               dev_err(&pdev->dev, "Error: No memory\n");

WARNING: space prohibited before semicolon
+       return ;

WARNING: void function return statements are not generally useful
+       return ;
+}

WARNING: quoted string split across lines
+MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson,"
+               "M'boumba Cedric Madianga");

total: 1 errors, 14 warnings, 1089 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: Block comments use a trailing */ on a separate line
+                        * not be accessed from here */

WARNING: Block comments use a trailing */ on a separate line
+                        * not be accessed from here */

WARNING: Block comments use a trailing */ on a separate line
+                                * the output is wanted in any case */

WARNING: Consecutive strings are generally better as a single string
+               "  addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n",

total: 0 errors, 4 warnings, 3331 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: Block comments use a trailing */ on a separate line
+        * */

WARNING: Block comments use a trailing */ on a separate line
+        * bank on higher 8 bits and reg in lower */

WARNING: Block comments use a trailing */ on a separate line
+        * bank on higher 8 bits and reg in lower */

WARNING: suspect code indent for conditional statements (8, 24)
+       if (unlikely(*offset == 17))
+                       *offset = 24;

WARNING: suspect code indent for conditional statements (8, 24)
+       if (unlikely(*offset == 16))
+                       *offset = 25;

WARNING: suspect code indent for conditional statements (8, 24)
+       if ((i == 3) && (*offset >= 24))
+                       *offset += 2;

WARNING: ENOSYS means 'invalid syscall nr' and nothing else
+               return -ENOSYS;

WARNING: static const char * array should probably be static const char * const
+       static const char *switch_off_status[] = {

WARNING: static const char * array should probably be static const char * const
+       static const char *turn_on_status[] = {

total: 0 errors, 9 warnings, 1867 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: Possible unnecessary 'out of memory' message
+       if (!otp) {
+               dev_err(&pdev->dev, "could not allocate AB3100 OTP device\n");

total: 0 errors, 1 warnings, 250 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: Missing a blank line after declarations
+       struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
+       if (!ab3100->startup_events_read)

WARNING: Possible unnecessary 'out of memory' message
+       if (!ab3100) {
+               dev_err(&client->dev, "could not allocate AB3100 device\n");

WARNING: else is not generally useful after a break or return
+                               break;
+                       } else {

total: 0 errors, 3 warnings, 996 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: Possible unnecessary 'out of memory' message
+       if (!aat2870) {
+               dev_err(&client->dev,

total: 0 errors, 1 warnings, 524 lines checked
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Checkpatch output:

WARNING: Block comments use a trailing */ on a separate line
+        * - turn off */

WARNING: Missing a blank line after declarations
+       int ret;
+       ret = i2c_add_driver(&pm860x_driver);

total: 0 errors, 2 warnings, 1283 lines checked
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Specify the device tree binding for the input clocks to Arizona devices.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The mfd/s2mpa01.txt duplicates some of the information about bindings
with old mfd/s2mps11.txt. Now common part exists entirely in
mfd/samsung,sec-core.txt so:
 - add company prefix to file name (regulator/samsung,s2mpa01.txt),
 - remove duplicated information,
 - reorganize the contents to match style of
   regulator/samsung,s2mps11.txt.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The regulator/s5m8767-regulator.txt duplicates some of the information
about bindings with old mfd/s2mps11.txt. Now common part exists entirely
in mfd/samsung,sec-core.txt so:
 - add company prefix to file name (regulator/samsung,s5m8767.txt),
 - remove duplicated information,
 - reorganize the contents to match style of
   regulator/samsung,s2mps11.txt.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>