- 02 Apr, 2020 7 commits
-
-
Al Viro authored
The only remaining caller (path_pts()) should be using follow_down() anyway. And clean path_pts() a bit. Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
new helper: choose_mountpoint(). Wrapper around choose_mountpoint_rcu(), similar to lookup_mnt() vs. __lookup_mnt(). follow_dotdot() switched to it. Now we don't grab mount_lock exclusive anymore; note that the primitive used non-RCU mount traversals in other direction (lookup_mnt()) doesn't bother with that either - it uses mount_lock seqcount instead. Signed-off-by: -
Al Viro authored
The loops in follow_dotdot{_rcu()} are doing the same thing: we have a mount and we want to find out how far up the chain of mounts do we need to go. We follow the chain of mount until we find one that is not directly overmounting the root of another mount. If such a mount is found, we want the location it's mounted upon. If we run out of chain (i.e. get to a mount that is not mounted on anything else) or run into process' root, we report failure. On success, we want (in RCU case) d_seq of resulting location sampled or (in non-RCU case) references to that location acquired. This commit introduces such primitive for RCU case and switches follow_dotdot_rcu() to it; non-RCU case will be go in the next commit. Signed-off-by: -
Al Viro authored
Change nd->path only after the loop is done and only in case we hadn't ended up finding ourselves in root. Same for NO_XDEV check. That separates the "check how far back do we need to go through the mount stack" logics from the rest of .. traversal. NOTE: path_get/path_put introduced here are temporary. They will go away later in the series. Signed-off-by: -
Al Viro authored
Change nd->path only after the loop is done and only in case we hadn't ended up finding ourselves in root. Same for NO_XDEV check. Don't recheck mount_lock on each step either. That separates the "check how far back do we need to go through the mount stack" logics from the rest of .. traversal. Note that the sequence for d_seq/d_inode here is * sample mount_lock seqcount ... * sample d_seq * fetch d_inode * verify mount_lock seqcount The last step makes sure that d_inode value we'd got matches d_seq - it dentry is guaranteed to have been a mountpoint through the entire thing, so its d_inode must have been stable. Signed-off-by: -
Al Viro authored
The logics in both of them is the same: while true if in process' root // uncommon break if *not* in mount root // normal case find the parent return if at absolute root // very uncommon break move to underlying mountpoint report that we are in root Pull the common path out of the loop: if in process' root // uncommon goto in_root if unlikely(in mount root) while true if at absolute root goto in_root move to underlying mountpoint if in process' root goto in_root if in mount root break; find the parent // we are not in mount root return in_root: report that we are in root The reason for that transformation is that we get to keep the common path straight *and* get a separate block for "move through underlying mountpoints", which will allow to sanitize NO_XDEV handling there. What's more, the pared-down loops will be easier to deal with - in particular, non-RCU case has no need to grab mount_lock and rewriting it to the form that wouldn't do that is a non-trivial change. Better do that with less stuff getting in the way... Signed-off-by: -
Al Viro authored
lift step_into() into handle_dots() (where they merge with each other); have follow_... return dentry and pass inode/seq to the caller. [braino fix folded; kudos to Qian Cai <cai@lca.pw> for reporting it] Signed-off-by:
-
- 14 Mar, 2020 33 commits
-
-
Al Viro authored
gets the regular mount crossing on result of .. Signed-off-by: -
Al Viro authored
Right now the tail ends of follow_dotdot{,_rcu}() are pretty much the open-coded analogues of step_into(). The differences: * the lack of proper LOOKUP_NO_XDEV handling in non-RCU case (arguably a bug) * the lack of ->d_manage() handling (again, arguably a bug) Adjust the calling conventions so that on the next step with could just switch those functions to returning step_into(). Signed-off-by: -
Al Viro authored
pure move; we are going to have step_into() called by that bunch. Signed-off-by: -
Al Viro authored
Behaviour change: LOOKUP_BENEATH lookup of .. in absolute root yields an error even if it's not the process' root. That's possible only if you'd managed to escape chroot jail by way of procfs symlinks, but IMO the resulting behaviour is not worse - more consistent and easier to describe: ".." in root is "stay where you are", uness LOOKUP_BENEATH has been given, in which case it's "fail with EXDEV". Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
Instead of returning 0, return new dentry; instead of returning -ENOENT, return NULL. Adjust the callers accordingly. Signed-off-by: -
Al Viro authored
eventually we'll want to do that check *before* mangling nd->path.dentry... Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
... getting may_create_in_sticky() checks in FMODE_OPENED case as well. Signed-off-by: -
Al Viro authored
Don't mess with got_write there - it is guaranteed to be false on entry and it will be set true if and only if we decide to go for truncation and manage to get write access for that. Don't carry acc_mode through the entire thing - it's only used in that part. And don't bother with gotos in there - compiler is quite capable of optimizing that. Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
it's easier to drop it right after lookup_open() and regain if needed (i.e. if we will need to truncate). On the non-FMODE_OPENED path we do that anyway. In case of FMODE_CREATED we won't be needing it. And it's easier to prove correctness that way, especially since the initial failure to get write access is not always fatal; proving that we'll never end up truncating in that case is rather convoluted. Signed-off-by: -
Al Viro authored
have FMODE_OPENED case rejoin the main path at earlier point Signed-off-by: -
Al Viro authored
there we'll be able to merge it with its counterparts in other cases, and there's no reason to do it before the parent has been unlocked Signed-off-by: -
Al Viro authored
->atomic_open() might have used a different alias than the one we'd passed to it; in "not opened" case we take care of that, in "opened" one we don't. Currently we don't care downstream of "opened" case which alias to return; however, that will change shortly when we get to unifying may_open() calls. It's not hard to get right in all cases, anyway. Signed-off-by: -
Al Viro authored
common guts of follow_down() and follow_managed() taken to a new helper - traverse_mounts(). The remnants of follow_managed() are folded into its sole remaining caller (handle_mounts()). Calling conventions of handle_mounts() slightly sanitized - instead of the weird "1 for success, -E... for failure" that used to be imposed by the calling conventions of walk_component() et.al. we can use the normal "0 for success, -E... for failure". Signed-off-by: -
Al Viro authored
make the loop more similar to that in follow_managed(), with explicit tracking of flags, etc. Signed-off-by: -
Al Viro authored
set on entry, clear when we get to the last component. Signed-off-by: -
Al Viro authored
We use nd->stack to store two things: pinning down the symlinks we are resolving and resuming the name traversal when a nested symlink is finished. Currently, nd->depth is used to keep track of both. It's 0 when we call link_path_walk() for the first time (for the pathname itself) and 1 on all subsequent calls (for trailing symlinks, if any). That's fine, as far as pinning symlinks goes - when handling a trailing symlink, the string we are interpreting is the body of symlink pinned down in nd->stack[0]. It's rather inconvenient with respect to handling nested symlinks, though - when we run out of a string we are currently interpreting, we need to decide whether it's a nested symlink (in which case we need to pick the string saved back when we started to interpret that nested symlink and resume its traversal) or not (in which case we are done with link_path_walk()). Current solution is a bit of a kludge - in handling of trailing symlink (in lookup_last() and open_last_lookups() we clear nd->stack[0].name. That allows link_path_walk() to use the following rules when running out of a string to interpret: * if nd->depth is zero, we are at the end of pathname itself. * if nd->depth is positive, check the saved string; for nested symlink it will be non-NULL, for trailing symlink - NULL. It works, but it's rather non-obvious. Note that we have two sets: the set of symlinks currently being traversed and the set of postponed pathname tails. The former is stored in nd->stack[0..nd->depth-1].link and it's valid throught the pathname resolution; the latter is valid only during an individual call of link_path_walk() and it occupies nd->stack[0..nd->depth-1].name for the first call of link_path_walk() and nd->stack[1..nd->depth-1].name for subsequent ones. The kludge is basically a way to recognize the second set becoming empty. The things get simpler if we keep track of the second set's size explicitly and always store it in nd->stack[0..depth-1].name. We access the second set only inside link_path_walk(), so its size can live in a local variable; that way the check becomes trivial without the need of that kludge. Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
old flags & WALK_FOLLOW <=> new !(flags & WALK_TRAILING) That's what that flag had really been used for. Signed-off-by: -
Al Viro authored
->last_type values are set in 3 places: path_init() (sets to LAST_ROOT), link_path_walk (LAST_NORM/DOT/DOTDOT) and pick_link (LAST_BIND). The are checked in walk_component(), lookup_last() and do_last(). They also get copied to the caller by filename_parentat(). In the last 3 cases the value is what we had at the return from link_path_walk(). In case of walk_component() it's either directly downstream from assignment in link_path_walk() or, when called by lookup_last(), the value we have at the return from link_path_walk(). The value at the entry into link_path_walk() can survive to return only if the pathname contains nothing but slashes. Note that pick_link() never returns such - pure jumps are handled directly. So for the calls of link_path_walk() for trailing symlinks it does not matter what value had been there at the entry; the value at the return won't depend upon it. There are 3 call chains that might have pick_link() storing LAST_BIND: 1) pick_link() from step_into() from walk_component() from link_path_walk(). In that case we will either be parsing the next component immediately after return into link_path_walk(), which will overwrite the ->last_type before anyone has a chance to look at it, or we'll fail, in which case nobody will be looking at ->last_type at all. 2) pick_link() from step_into() from walk_component() from lookup_last(). The value is never looked at due to the above; it won't affect the value seen at return from any link_path_walk(). 3) pick_link() from step_into() from do_last(). Ditto. In other words, assignemnt in pick_link() is pointless, and so is LAST_BIND itself; nothing ever looks at that value. Kill it off. And make link_path_walk() _always_ assign ->last_type - in the only case when the value at the entry might survive to the return that value is always LAST_ROOT, inherited from path_init(). Move that assignment from path_init() into the beginning of link_path_walk(), to consolidate the things. Historical note: LAST_BIND used to be used for the kludge with trailing pure jump symlinks (extra iteration through the top-level loop). No point keeping it anymore... Signed-off-by: -
Al Viro authored
kill nd->link_inode, while we are at it Signed-off-by: -
Al Viro authored
move the only remaining call of get_link() into pick_link() Signed-off-by: -
Al Viro authored
move get_link() call into step_into(). Signed-off-by: -
Al Viro authored
Move the call of get_link() into walk_component(). Change the calling conventions for walk_component() to returning the link body to follow (if any). Signed-off-by: -
Al Viro authored
After a pure jump ("/" or procfs-style symlink) we don't need to hold the link anymore. link_path_walk() dropped it if such case had been detected, lookup_last/do_last() (i.e. old trailing_symlink()) left it on the stack - it ended up calling terminate_walk() shortly anyway, which would've purged the entire stack. Do it in get_link() itself instead. Simpler logics that way... Signed-off-by: -
Al Viro authored
Fold trailing_symlink() into lookup_last() and do_last(), change the calling conventions of those two. Rules change: success, we are done => NULL instead of 0 error => ERR_PTR(-E...) instead of -E... got a symlink to follow => return the path to be followed instead of 1 The loops calling those (in path_lookupat() and path_openat()) adjusted. A subtle change of control flow here: originally a pure-jump trailing symlink ("/" or procfs one) would've passed through the upper level loop once more, with "" for path to traverse. That would've brought us back to the lookup_last/do_last entry and we would've hit LAST_BIND case (LAST_BIND left from get_link() called by trailing_symlink()) and pretty much skip to the point right after where we'd left the sucker back when we picked that trailing symlink. Now we don't bother with that extra pass through the upper level loop - if get_link() says "I've just done a pure jump, nothing else to do", we just treat that as non-symlink case. Boilerplate added on that step will go away shortly - it'll migrate into walk_component() and then to step_into(), collapsing into the change of calling conventions for those. Signed-off-by: -
Al Viro authored
Move restoring LOOKUP_PARENT and zeroing nd->stack.name[0] past the call of get_link() (nothing _currently_ uses them in there). That allows to moved the call of may_follow_link() into get_link() as well, since now the presence of LOOKUP_PARENT distinguishes the callers from each other (link_path_walk() has it, trailing_symlink() doesn't). Preparations for folding trailing_symlink() into callers (lookup_last() and do_last()) and changing the calling conventions of those. Next stage after that will have get_link() call migrate into walk_component(), then - into step_into(). It's tricky enough to warrant doing that in stages, unfortunately... Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
New LOOKUP flag, telling path_lookupat() to act as path_mountpointat(). IOW, traverse mounts at the final point and skip revalidation of the location where it ends up. Signed-off-by: -
Al Viro authored
The following is true: * calls of handle_mounts() and step_into() are always paired in sequences like err = handle_mounts(nd, dentry, &path, &inode, &seq); if (unlikely(err < 0)) return err; err = step_into(nd, &path, flags, inode, seq); * in all such sequences path is uninitialized before and unused after this pair of calls * in all such sequences inode and seq are unused afterwards. So the call of handle_mounts() can be shifted inside step_into(), turning 'path' into a local variable in the combined function. Signed-off-by:
-
