We haven't taken the lock yet so we don't need to unlock here.

Fixes: 0d96d5ea ('iio: humidity: Add triggered buffer support for AM2315')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Tiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Apply the correct mask to enable all available humidity integration
times.  Currently, the driver defaults to 6500 and all is okay with that.
However, if 3850 is selected we get a stuck bit and can't change back
to 6500 or select 2500.  (Verified with HDC1008)
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Matt Ranostay <mranostay@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The bmp280 driver also supports BMP180 which has a different chip id
with BMP280.  The probe routine verifies that the device reports the
correct chip id but the error message is confusing as if BMP280's chip
id is always expected.
Reported-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Matt Ranostay <mranostay@gmail.com>
Cc: Vlad Dogaru <vlad.dogaru@intel.com>
Cc: Christoph Mair <christoph.mair@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

When writing a value using direct reg access from debugfs
we need to return and not fall through to reading the
value, lest we'll dereference a NULL pointer.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The > here should be >= or we go beyond the end for the array.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

mask and val parameters of regmap_update_bits were reveresed.

Fixes: 77c4ad2d ("iio: imu: Add initial support for Bosch BMI160")
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Format is INT_PLUS_MICRO and micro odr part of ODR should
be parts of a micro.

Also s/8000/800 this is obviously a typo.

Fixes: 77c4ad2d ("iio: imu: Add initial support for Bosch BMI160")
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Move the module_init()/module_exit() so they are in the prefered spot
on the line after the function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add docbook comments for the exported functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, move these functions to a more logical spot in the
code and add docbook comments for the exported functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, move this functions to a more logical spot in the
code and add a docbook comment for the exported function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, make the actual "request" function static and change
mite_request_channel_in_range() into a wrapper that calls the internal
function. Change the inline function that requests any free channel
into an export that also calls the internal function.

Move the functions to a more logical spot in the code and add docbook
comments for the exported functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, move the functions that allocate/free and initialize
the mite dma ring. They are currently kind of scattered around the
code.

Add docbook comments for the exported functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The dev_err() messages with pci_ioremap_bar() fails are just noise.
Remove them.

The 'use_win1' and 'fifo_size' dev_info() messages are also noise
but they may be useful when debugging. Change them to dev_dbg().

Absorb dump_chip_signnature() and change the pr_info() messages
to dev_dbg(). These also might be useful when debugging.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently all the drivers that use the mite driver have to call
mite_setup() after allocating and initializing the mite device
with mite_attach().

Move the mite_setup() call into mite_attach() to simplify the
drivers a bit and remove the need for the additional inline and
exported functions.

For aesthetics, move mite_setup2(), and rename it to mite_setup(),
so it's near mite_attach().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These functions are basically the comedi_driver (*attach)/(*detach)
for this driver.

For aesthetics, rename mite_alloc() to mite_attach() and pass the
comedi_device pointer to it instead of the pci_dev pointer.

Move the functions to the end of the file. This is typically where
a comedi_drivers (*attach)/(*detach) are located.

Add some docbook comments for these exported functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a local variable to mite_buf_change() so that the prefered
form of passing a struct size, sizeof(*p), can be used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to handle the dma_free_coherent() of
the mite dma descriptors.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

An allocated mite_channel will have its 'ring' member initialized
to point to the mite_ring that will be used for DMA. A non-allocated
mite_channel will have a 'ring' member set to NULL, either by a
channel release or due to the initial kzalloc of the 'mite' struct.

Refactor the code to use the mite_chan->ring to detect in a channel
is allocated and remove the unnecessary member.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this member of struct mite to 'mmio' to help shorten the long lines.

Add a local variable for the mite pointer in the ni_pcimio driver
to clarify and shorten the long lines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a local variable for the mite_dma_desc pointer to help clarify
this function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this member of struct mite_ring to 'descs' to help shorten the
long lines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this member of struct mite_ring to 'dma_addr' to help shorten the
long lines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this name to 'mite_ring' to help shorten the long lines.

In the ni_660x driver, also shorten the private data member 'mite_rings'
to simply 'ring'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this struct to 'mite_dma_desc' to help shorten the long lines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this struct to simply 'mite'. The current name is a bit redundant.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Align wrapped lines to parentheses (if applicable).
Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Spaces after casts are removed
Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

added operator white space and parentheses for readability
Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added lines between functions in skein_block.c and removed unneeded
lines in skein_block.c
Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch renames result to ret that is used to get return value from
wilc_send_config_pkt. Some handle_*() functions are used as result,
others are used as ret. It will be changed as ret in all handle_*()
functions to match variable name.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch changes data type of result variable from s32 to int. result
is used to get return value from wilc_send_config_pkt that has return
type of int.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When handle_get_mac_address is called in hostIFthread that is a kernel
thread, it is not checked return type of this function. This patch
changes return type to void and removes braces if statement due to have
a single statement.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch changes conditional comparison of if statement as if (ret)
instead of using if (ret != 0)
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch renames result to ret that is used to get return value from
wilc_send_config_pkt. Some handle_*() functions are used as result,
others are used as ret. It will be changed as ret in all handle_*()
functions to match variable name.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch changes data type of result variable from s32 to int. result
is used to get return value from wilc_send_config_pkt that has return
type of int.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When handle_get_ip_address is called in hostIFthread that is a kernel
thread, it is not checked return type of this function. This patch
changes return type to void and removes braces if statement due to have
a single statement.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix coding style issue
Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix coding style issue
Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix coding style issue
Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>