- 23 Mar, 2017 13 commits
-
-
NeilBrown authored
percpu_ref_switch_to_atomic_sync() schedules the switch to atomic mode, then waits for it to complete. Also export percpu_ref_switch_to_* so they can be used from modules. This will be used in md/raid to count the number of pending write requests to an array. We occasionally need to check if the count is zero, but most often we don't care. We always want updates to the counter to be fast, as in some cases we count every 4K page. Signed-off-by:
NeilBrown <neilb@suse.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Shaohua Li <shli@fb.com>
-
NeilBrown authored
If ->in_sync is being set just as md_write_start() is being called, it is possible that set_in_sync() won't see the elevated ->writes_pending, and md_write_start() won't see the set ->in_sync. To close this race, re-test ->writes_pending after setting ->in_sync, and add memory barriers to ensure the increment of ->writes_pending will be seen by the time of this second test, or the new ->in_sync will be seen by md_write_start(). Add a spinlock to array_state_show() to ensure this temporary instability is never visible from userspace. Signed-off-by:
-
NeilBrown authored
Three separate places in md.c check if the number of active writes is zero and, if so, sets mddev->in_sync. There are a few differences, but there shouldn't be: - it is always appropriate to notify the change in sysfs_state, and there is no need to do this outside a spin-locked region. - we never need to check ->recovery_cp. The state of resync is not relevant for whether there are any pending writes or not (which is what ->in_sync reports). So create set_in_sync() which does the correct tests and makes the correct changes, and call this in all three places. Any behaviour changes here a minor and cosmetic. Signed-off-by:
-
NeilBrown authored
This test on ->writes_pending cannot be safe as the counter can be incremented at any moment and cannot be locked against. Change it to test conf->active_stripes, which at least can be locked against. More changes are still needed. A future patch will change ->writes_pending, and testing it here will be very inconvenient. Signed-off-by:
-
NeilBrown authored
Change to use bio->__bi_remaining to count number of r1bio attached to a bio. See precious raid10 patch for more details. Like the raid10.c patch, this fixes a bug as nr_queued and nr_pending used to measure different things, but were being compared. This patch fixes another bug in that nr_pending previously did not could write-behind requests, so behind writes could continue while resync was happening. How that nr_pending counts all r1_bio, the resync cannot commence until the behind writes have completed. Signed-off-by:
-
NeilBrown authored
raid10 currently repurposes bi_phys_segments on each incoming bio to count how many r10bio was used to encode the request. We need to know when the number of attached r10bio reaches zero to: 1/ call bio_endio() when all IO on the bio is finished 2/ decrement ->nr_pending so that resync IO can proceed. Now that the bio has its own __bi_remaining counter, that can be used instead. We can call bio_inc_remaining to increment the counter and call bio_endio() every time an r10bio completes, rather than only when bi_phys_segments reaches zero. This addresses point 1, but not point 2. bio_endio() doesn't (and cannot) report when the last r10bio has finished, so a different approach is needed. So: instead of counting bios in ->nr_pending, count r10bios. i.e. every time we attach a bio, increment nr_pending. Every time an r10bio completes, decrement nr_pending. Normally we only increment nr_pending after first checking that ->barrier is zero, or some other non-trivial tests and possible waiting. When attaching multiple r10bios to a bio, we only need the tests and the waiting once. After the first increment, subsequent increments can happen unconditionally as they are really all part of the one request. So introduce inc_pending() which can be used when we know that nr_pending is already elevated. Note that this fixes a bug. freeze_array() contains the line atomic_read(&conf->nr_pending) == conf->nr_queued+extra, which implies that the units for ->nr_pending, ->nr_queued and extra are the same. ->nr_queue and extra count r10_bios, but prior to this patch, ->nr_pending counted bios. If a bio ever resulted in multiple r10_bios (due to bad blocks), freeze_array() would not work correctly. Now it does. Signed-off-by:
-
NeilBrown authored
When raid1 or raid10 find they will need to allocate a new r1bio/r10bio, in order to work around a known bad block, they account for the allocation well before the allocation is made. This separation makes the correctness less obvious and requires comments. The accounting needs to be a little before: before the first rXbio is submitted, but that is all. So move the accounting down to where it makes more sense. Signed-off-by:
-
NeilBrown authored
This reverts commit e8d7c332. Now that raid5 doesn't abuse bi_phys_segments any more, we no longer need to impose these limits. Signed-off-by:
-
NeilBrown authored
When a read request, which bypassed the cache, fails, we need to retry it through the cache. This involves attaching it to a sequence of stripe_heads, and it may not be possible to get all the stripe_heads we need at once. We do what we can, and record how far we got in ->bi_phys_segments so we can pick up again later. There is only ever one bio which may have a non-zero offset stored in ->bi_phys_segments, the one that is either active in the single thread which calls retry_aligned_read(), or is in conf->retry_read_aligned waiting for retry_aligned_read() to be called again. So we only need to store one offset value. This can be in a local variable passed between remove_bio_from_retry() and retry_aligned_read(), or in the r5conf structure next to the ->retry_read_aligned pointer. Storing it there allows the last usage of ->bi_phys_segments to be removed from md/raid5.c. Signed-off-by:
-
NeilBrown authored
md/raid5 needs to keep track of how many stripe_heads are processing a bio so that it can delay calling bio_endio() until all stripe_heads have completed. It currently uses 16 bits of ->bi_phys_segments for this purpose. 16 bits is only enough for 256M requests, and it is possible for a single bio to be larger than this, which causes problems. Also, the bio struct contains a larger counter, __bi_remaining, which has a purpose very similar to the purpose of our counter. So stop using ->bi_phys_segments, and instead use __bi_remaining. This means we don't need to initialize the counter, as our caller initializes it to '1'. It also means we can call bio_endio() directly as it tests this counter internally. Signed-off-by:
-
NeilBrown authored
We currently gather bios that need to be returned into a bio_list and call bio_endio() on them all together. The original reason for this was to avoid making the calls while holding a spinlock. Locking has changed a lot since then, and that reason is no longer valid. So discard return_io() and various return_bi lists, and just call bio_endio() directly as needed. Signed-off-by:
-
NeilBrown authored
If a device fails during a write, we must ensure the failure is recorded in the metadata before the completion of the write is acknowleged. Commit c3cce6cd ("md/raid5: ensure device failure recorded before write request returns.") added code for this, but it was unnecessarily complicated. We already had similar functionality for handling updates to the bad-block-list, thanks to Commit de393cde ("md: make it easier to wait for bad blocks to be acknowledged.") So revert most of the former commit, and instead avoid collecting completed writes if MD_CHANGE_PENDING is set. raid5d() will then flush the metadata and retry the stripe_head. As this change can leave a stripe_head ready for handling immediately after handle_active_stripes() returns, we change raid5_do_work() to pause when MD_CHANGE_PENDING is set, so that it doesn't spin. We check MD_CHANGE_PENDING *after* analyse_stripe() as it could be set asynchronously. After analyse_stripe(), we have collected stable data about the state of devices, which will be used to make decisions. Signed-off-by:
-
NeilBrown authored
We use md_write_start() to increase the count of pending writes, and md_write_end() to decrement the count. We currently count bios submitted to md/raid5. Change it count stripe_heads that a WRITE bio has been attached to. So now, raid5_make_request() calls md_write_start() and then md_write_end() to keep the count elevated during the setup of the request. add_stripe_bio() calls md_write_start() for each stripe_head, and the completion routines always call md_write_end(), instead of only calling it when raid5_dec_bi_active_stripes() returns 0. make_discard_request also calls md_write_start/end(). The parallel between md_write_{start,end} and use of bi_phys_segments can be seen in that: Whenever we set bi_phys_segments to 1, we now call md_write_start. Whenever we increment it on non-read requests with raid5_inc_bi_active_stripes(), we now call md_write_start(). Whenever we decrement bi_phys_segments on non-read requsts with raid5_dec_bi_active_stripes(), we now call md_write_end(). This reduces our dependence on keeping a per-bio count of active stripes in bi_phys_segments. md_write_inc() is added which parallels md_write_start(), but requires that a write has already been started, and is certain never to sleep. This can be used inside a spinlocked region when adding to a write request. Signed-off-by:
-
- 16 Mar, 2017 21 commits
-
-
Guoqing Jiang authored
Since we have switched to sync way to handle METADATA_UPDATED msg for md-cluster, then process_metadata_update is depended on mddev->thread->wqueue. With the new change, clustered raid could possible hang if array received a METADATA_UPDATED msg after array unregistered mddev->thread, so we need to stop clustered raid (bitmap_destroy -> bitmap_free -> md_cluster_stop) earlier than unregister thread (mddev_detach -> md_unregister_thread). And this change should be safe for non-clustered raid since all writes are stopped before the destroy. Also in md_run, we activate the personality (pers->run()) before activating the bitmap (bitmap_create()). So it is pleasingly symmetric to stop the bitmap (bitmap_destroy()) before stopping the personality (__md_stop() calls pers->free()), we achieve this by move bitmap_destroy to the beginning of __md_stop. But we don't want to break the codes for waiting behind IO as Shaohua mentioned, so introduce bitmap_wait_behind_writes to call the codes, and call the new fun in both mddev_detach and bitmap_destroy, then we will not break original behind IO code and also fit the new condition well. Signed-off-by:
Guoqing Jiang <gqjiang@suse.com> Signed-off-by:
-
Song Liu authored
In r5c_finish_stripe_write_out(), R5LOG_PAYLOAD_FLUSH is append to log->current_io. Appending R5LOG_PAYLOAD_FLUSH in quiesce needs extra writes to journal. To simplify the logic, we just skip R5LOG_PAYLOAD_FLUSH in quiesce. Even R5LOG_PAYLOAD_FLUSH supports multiple stripes per payload. However, current implementation is one stripe per R5LOG_PAYLOAD_FLUSH, which is simpler. Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Song Liu authored
This patch adds handling of R5LOG_PAYLOAD_FLUSH in journal recovery. Next patch will add logic that generate R5LOG_PAYLOAD_FLUSH on flush finish. When R5LOG_PAYLOAD_FLUSH is seen in recovery, pending data and parity will be dropped from recovery. This will reduce the number of stripes to replay, and thus accelerate the recovery process. Signed-off-by:
-
Artur Paszkiewicz authored
Allow writing to 'consistency_policy' attribute when the array is active. Add a new function 'change_consistency_policy' to the md_personality operations structure to handle the change in the personality code. Values "ppl" and "resync" are accepted and turn PPL on and off respectively. When enabling PPL its location and size should first be set using 'ppl_sector' and 'ppl_size' attributes and a valid PPL header should be written at this location on each member device. Enabling or disabling PPL is performed under a suspended array. The raid5_reset_stripe_cache function frees the stripe cache and allocates it again in order to allocate or free the ppl_pages for the stripes in the stripe cache. Signed-off-by:
Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by:
-
Artur Paszkiewicz authored
Add a function to modify the log by removing an rdev when a drive fails or adding when a spare/replacement is activated as a raid member. Removing a disk just clears the child log rdev pointer. No new stripes will be accepted for this child log in ppl_write_stripe() and running io units will be processed without writing PPL to the device. Adding a disk sets the child log rdev pointer and writes an empty PPL header. Signed-off-by:
-
Artur Paszkiewicz authored
Load the log from each disk when starting the array and recover if the array is dirty. The initial empty PPL is written by mdadm. When loading the log we verify the header checksum and signature. For external metadata arrays the signature is verified in userspace, so here we read it from the header, verifying only if it matches on all disks, and use it later when writing PPL. In addition to the header checksum, each header entry also contains a checksum of its partial parity data. If the header is valid, recovery is performed for each entry until an invalid entry is found. If the array is not degraded and recovery using PPL fully succeeds, there is no need to resync the array because data and parity will be consistent, so in this case resync will be disabled. Due to compatibility with IMSM implementations on other systems, we can't assume that the recovery data block size is always 4K. Writes generated by MD raid5 don't have this issue, but when recovering PPL written in other environments it is possible to have entries with 512-byte sector granularity. The recovery code takes this into account and also the logical sector size of the underlying drives. Signed-off-by:
-
Artur Paszkiewicz authored
Add 'consistency_policy' attribute for array. It indicates how the array maintains consistency in case of unexpected shutdown. Add 'ppl_sector' and 'ppl_size' for rdev, which describe the location and size of the PPL space on the device. They can't be changed for active members if the array is started and PPL is enabled, so in the setter functions only basic checks are performed. More checks are done in ppl_validate_rdev() when starting the log. These attributes are writable to allow enabling PPL for external metadata arrays and (later) to enable/disable PPL for a running array. Signed-off-by:
-
Artur Paszkiewicz authored
Implement the calculation of partial parity for a stripe and PPL write logging functionality. The description of PPL is added to the documentation. More details can be found in the comments in raid5-ppl.c. Attach a page for holding the partial parity data to stripe_head. Allocate it only if mddev has the MD_HAS_PPL flag set. Partial parity is the xor of not modified data chunks of a stripe and is calculated as follows: - reconstruct-write case: xor data from all not updated disks in a stripe - read-modify-write case: xor old data and parity from all updated disks in a stripe Implement it using the async_tx API and integrate into raid_run_ops(). It must be called when we still have access to old data, so do it when STRIPE_OP_BIODRAIN is set, but before ops_run_prexor5(). The result is stored into sh->ppl_page. Partial parity is not meaningful for full stripe write and is not stored in the log or used for recovery, so don't attempt to calculate it when stripe has STRIPE_FULL_WRITE. Put the PPL metadata structures to md_p.h because userspace tools (mdadm) will also need to read/write PPL. Warn about using PPL with enabled disk volatile write-back cache for now. It can be removed once disk cache flushing before writing PPL is implemented. Signed-off-by:
-
Artur Paszkiewicz authored
Move raid5-cache declarations from raid5.h to raid5-log.h, add inline wrappers for functions which will be shared with ppl and use them in raid5 core instead of direct calls to raid5-cache. Remove unused parameter from r5c_cache_data(), move two duplicated pr_debug() calls to r5l_init_log(). Signed-off-by:
-
Artur Paszkiewicz authored
Include information about PPL location and size into mdp_superblock_1 and copy it to/from rdev. Because PPL is mutually exclusive with bitmap, put it in place of 'bitmap_offset'. Add a new flag MD_FEATURE_PPL for 'feature_map', analogically to MD_FEATURE_BITMAP_OFFSET. Add MD_HAS_PPL to mddev->flags to indicate that PPL is enabled on an array. Signed-off-by:
-
Song Liu authored
In r5cache recovery, the journal device is scanned page by page. Currently, we use sync_page_io() to read journal device. This is not efficient when we have to recovery many stripes from the journal. To improve the speed of recovery, this patch introduces a read ahead page pool (ra_pool) to recovery_ctx. With ra_pool, multiple consecutive pages are read in one IO. Then the recovery code read the journal from ra_pool. With ra_pool, r5l_recovery_ctx has become much bigger. Therefore, r5l_recovery_log() is refactored so r5l_recovery_ctx is not using stack space. Signed-off-by:
-
Shaohua Li authored
Previous patch (raid5: only dispatch IO from raid5d for harddisk raid) defers IO dispatching. The goal is to create better IO pattern. At that time, we don't sort the deffered IO and hope the block layer can do IO merge and sort. Now the raid5-cache writeback could create large amount of bios. And if we enable muti-thread for stripe handling, we can't control when to dispatch IO to raid disks. In a lot of time, we are dispatching IO which block layer can't do merge effectively. This patch moves further for the IO dispatching defer. We accumulate bios, but we don't dispatch all the bios after a threshold is met. This 'dispatch partial portion of bios' stragety allows bios coming in a large time window are sent to disks together. At the dispatching time, there is large chance the block layer can merge the bios. To make this more effective, we dispatch IO in ascending order. This increases request merge chance and reduces disk seek. Signed-off-by: -
Shaohua Li authored
Bump the flush stripe batch size to 2048. For my 12 disks raid array, the stripes takes: 12 * 4k * 2048 = 96MB This is still quite small. A hardware raid card generally has 1GB size, which we suggest the raid5-cache has similar cache size. The advantage of a big batch size is we can dispatch a lot of IO in the same time, then we can do some scheduling to make better IO pattern. Last patch prioritizes stripes, so we don't worry about a big flush stripe batch will starve normal stripes. Signed-off-by: -
Shaohua Li authored
In raid5-cache writeback mode, we have two types of stripes to handle. - stripes which aren't cached yet - stripes which are cached and flushing out to raid disks Upperlayer is more sensistive to latency of the first type of stripes generally. But we only one handle list for all these stripes, where the two types of stripes are mixed together. When reclaim flushes a lot of stripes, the first type of stripes could be noticeably delayed. On the other hand, if the log space is tight, we'd like to handle the second type of stripes faster and free log space. This patch destinguishes the two types stripes. They are added into different handle list. When we try to get a stripe to handl, we prefer the first type of stripes unless log space is tight. This should have no impact for !writeback case. Signed-off-by: -
Guoqing Jiang authored
To update size for cluster raid, we need to make sure all nodes can perform the change successfully. However, it is possible that some of them can't do it due to failure (bitmap_resize could fail). So we need to consider the issue before we set the capacity unconditionally, and we use below steps to perform sanity check. 1. A change the size, then broadcast METADATA_UPDATED msg. 2. B and C receive METADATA_UPDATED change the size excepts call set_capacity, sync_size is not update if the change failed. Also call bitmap_update_sb to sync sb to disk. 3. A checks other node's sync_size, if sync_size has been updated in all nodes, then send CHANGE_CAPACITY msg otherwise send msg to revert previous change. 4. B and C call set_capacity if receive CHANGE_CAPACITY msg, otherwise pers->resize will be called to restore the old value. Reviewed-by:
-
Guoqing Jiang authored
Support resize is a little complex for clustered raid, since we need to ensure all the nodes share the same knowledge about the size of raid. We achieve the goal by check the sync_size which is in each node's bitmap, we can only change the capacity after cluster_check_sync_size returns 0. Also, get_bitmap_from_slot is added to get a slot's bitmap. And we exported some funcs since they are used in cluster_check_sync_size(). We can also reuse get_bitmap_from_slot to remove redundant code existed in bitmap_copy_from_slot. Reviewed-by:
-
Guoqing Jiang authored
The msg type CHANGE_CAPACITY is introduced to support resize clustered raid in later patch, and it is sent after all the nodes have the same sync_size, receiver node just need to set new capacity once received this msg. Reviewed-by:
-
Guoqing Jiang authored
Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: -
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fix from Darrick Wong: "Here's a single fix for -rc3 to improve input validation on inline directory data to prevent buffer overruns due to corrupt metadata" * tag 'xfs-4.11-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: verify inline directory data forks
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes/cleanups from Catalin Marinas: "In Will's absence I'm sending the arm64 fixes he queued for 4.11-rc3: - fix arm64 kernel boot warning when DEBUG_VIRTUAL and KASAN are enabled - enable KEYS_COMPAT for keyctl compat support - use cpus_have_const_cap() for system_uses_ttbr0_pan() (slight performance improvement) - update kerneldoc for cpu_suspend() rename - remove the arm64-specific kprobe_exceptions_notify (weak generic variant defined)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kernel: Update kerneldoc for cpu_suspend() rename arm64: use const cap for system_uses_ttbr0_pan() arm64: support keyctl() system call in 32-bit mode arm64: kasan: avoid bad virt_to_pfn() arm64: kprobes: remove kprobe_exceptions_notify -
git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds authored
Pull MD fixes from Shaohua Li: - fix a parity calculation bug of raid5 cache by Song - fix a potential deadlock issue by me - fix two endian issues by Jason - fix a disk limitation issue by Neil - other small fixes and cleanup * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/raid1: fix a trivial typo in comments md/r5cache: fix set_syndrome_sources() for data in cache md: fix incorrect use of lexx_to_cpu in does_sb_need_changing md: fix super_offset endianness in super_1_rdev_size_change md/raid1/10: fix potential deadlock md: don't impose the MD_SB_DISKS limit on arrays without metadata. md: move funcs from pers->resize to update_size md-cluster: remove useless memset from gather_all_resync_info md-cluster: free md_cluster_info if node leave cluster md: delete dead code md/raid10: submit bio directly to replacement disk
-
- 15 Mar, 2017 6 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Four small fixes for this cycle: - followup fix from Neil for a fix that went in before -rc2, ensuring that we always see the full per-task bio_list. - fix for blk-mq-sched from me that ensures that we retain similar direct-to-issue behavior on running the queue. - fix from Sagi fixing a potential NULL pointer dereference in blk-mq on spurious CPU unplug. - a memory leak fix in writeback from Tahsin, fixing a case where device removal of a mounted device can leak a struct wb_writeback_work" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq-sched: don't run the queue async from blk_mq_try_issue_directly() writeback: fix memory leak in wb_queue_work() blk-mq: Fix tagset reinit in the presence of cpu hot-unplug blk: Ensure users for current->bio_list can see the full list. -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a rather large set of fixes. The bulk are for lpfc correcting a lot of issues in the new NVME driver code which just went in in the merge window. The others are: - fix a hang in the vmware paravirt driver caused by incorrect handling of the new MSI vector allocation - long standing bug in storvsc, which recent block changes turned from being a harmless annoyance into a hang - yet more fallout (in mpt3sas) from the changes to device blocking The remainder are small fixes and updates" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (34 commits) scsi: lpfc: Add shutdown method for kexec scsi: storvsc: Workaround for virtual DVD SCSI version scsi: lpfc: revise version number to 11.2.0.10 scsi: lpfc: code cleanups in NVME initiator discovery scsi: lpfc: code cleanups in NVME initiator base scsi: lpfc: correct rdp diag portnames scsi: lpfc: remove dead sli3 nvme code scsi: lpfc: correct double print scsi: lpfc: Rename LPFC_MAX_EQ_DELAY to LPFC_MAX_EQ_DELAY_EQID_CNT scsi: lpfc: Rework lpfc Kconfig for NVME options scsi: lpfc: add transport eh_timed_out reference scsi: lpfc: Fix eh_deadline setting for sli3 adapters. scsi: lpfc: add NVME exchange aborts scsi: lpfc: Fix nvme allocation bug on failed nvme_fc_register_localport scsi: lpfc: Fix IO submission if WQ is full scsi: lpfc: Fix NVME CMD IU byte swapped word 1 problem scsi: lpfc: Fix RCTL value on NVME LS request and response scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters scsi: lpfc: fix missing spin_unlock on sql_list_lock scsi: lpfc: don't dereference dma_buf->iocbq before null check ... -
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 fix from Bob Peterson: "This is an emergency patch for 4.11-rc3 The GFS2 developers uncovered a really nasty problem that can lead to random corruption and kernel panic, much like the last one. Andreas Gruenbacher wrote a simple one-line patch to fix the problem." * tag 'gfs2-4.11-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Avoid alignment hole in struct lm_lockname
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: - self-test failure of crc32c on powerpc - regressions of ecb(aes) when used with xts/lrw in s5p-sss - a number of bugs in the omap RNG driver * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: s5p-sss - Fix spinlock recursion on LRW(AES) hwrng: omap - Do not access INTMASK_REG on EIP76 hwrng: omap - use devm_clk_get() instead of of_clk_get() hwrng: omap - write registers after enabling the clock crypto: s5p-sss - Fix completing crypto request in IRQ handler crypto: powerpc - Fix initialisation of crc32c context
-
Andreas Gruenbacher authored
Commit 88ffbf3e switches to using rhashtables for glocks, hashing over the entire struct lm_lockname instead of its individual fields. On some architectures, struct lm_lockname contains a hole of uninitialized memory due to alignment rules, which now leads to incorrect hash values. Get rid of that hole. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> CC: <stable@vger.kernel.org> #v4.3+
-
Darrick J. Wong authored
When we're reading or writing the data fork of an inline directory, check the contents to make sure we're not overflowing buffers or eating garbage data. xfs/348 corrupts an inline symlink into an inline directory, triggering a buffer overflow bug. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> --- v2: add more checks consistent with _dir2_sf_check and make the verifier usable from anywhere.
-
