- 23 May, 2008 40 commits
-
-
Steven Rostedt authored
This patch is the correct way to have tracing enabled by default. Signed-off-by:
Steven Rostedt <srostedt@redhat.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Steven Rostedt authored
Since ftrace touches practically every function. If we detect any anomaly, we want to fully disable ftrace. This patch adds code to try shutdown ftrace as much as possible without doing any more harm is something is detected not quite correct. This only kills ftrace, this patch does have checks for other parts of the tracer (irqsoff, wakeup, etc.). Signed-off-by:
-
Steven Rostedt authored
The ftrace dynamic function update allocates a record to store the instruction pointers that are being modified. If the modified instruction pointer fails to update, then the record is marked as failed and nothing more is done. Worse, if the modification fails, but the record ip function is still called, it will allocate a new record and try again. In just a matter of time, will this cause a serious memory leak and crash the system. This patch plugs this memory leak. When a record fails, it is included back into the pool of records to be used. Now a record may fail over and over again, but the number of allocated records will not increase. Signed-off-by:
-
Steven Rostedt authored
Some fixes for better output with the trace pipe. Signed-off-by:
-
Ingo Molnar authored
should be an irq-safe lock ... Signed-off-by:
-
Ingo Molnar authored
for ad-hoc tracing. Signed-off-by:
-
Ingo Molnar authored
Signed-off-by:
-
Ingo Molnar authored
Signed-off-by:
-
Ingo Molnar authored
Signed-off-by:
-
Ingo Molnar authored
remove idx syncing - it's expensive on SMP. Signed-off-by:
-
Ingo Molnar authored
implement globally synchronized, fast and scalable time source for tracing. Signed-off-by:
-
Ingo Molnar authored
rename and uninline now() to ftrace_now(). Signed-off-by:
-
Ingo Molnar authored
no code changed. Signed-off-by:
-
Ingo Molnar authored
we can hold all cpu trace buffer locks at once - put each into a separate lock class. Signed-off-by:
-
Steven Rostedt authored
This patch creates a file called trace_pipe in the tracing debug directory. This file is a consumer of the trace buffers. This means that reads of this file consumes the entries from the trace buffers so that they will not be read a second time, as contrast to the static buffers latency_trace and trace. Reading from the trace_pipe will remove the entries from trace and latency_trace too. The advantage that trace_pipe has is that it can record live traces. It will block when there is nothing in the buffer, and read the entries as they are entered. An EOF happens when tracing is disabled (tracing_enabled = 0). Signed-off-by:
-
Steven Rostedt authored
Later patches will need to print the same things as the seq output does. But those outputs will not use the seq utility. This patch adds a buffer to the iterator, that can be used by either the seq utility or other output. Signed-off-by:
-
Steven Rostedt authored
This patch changes the way the CPU trace buffers are handled. Instead of always starting from the trace page head, the logic is changed to a producer consumer logic. This allows for the buffers to be drained while they are alive. Signed-off-by:
-
Steven Rostedt authored
The tests may leave stuff in the buffers. This resets the buffers after each test is run. If a test fails, it does not reset the buffer to avoid touching a buffer that is corrupted. Signed-off-by:
-
Steven Rostedt authored
If the trace buffer is detected to be corrupted, then we disable all tracers. Signed-off-by:
-
Ingo Molnar authored
fix time offset calculations and ordering, plus make code more consistent. Signed-off-by:
-
Steven Rostedt authored
This patch adds a startup self test on dynamic code modification and filters. The test filters on a specific function, makes sure that no other function is traced, exectutes the function, then makes sure that the function is traced. This patch also fixes a slight bug with the ftrace selftest, where tracer_enabled was not being set. Signed-off-by:
-
Ingo Molnar authored
make it easier for newbies to find their way around. Signed-off-by:
-
Ingo Molnar authored
factor out code and clean it up. Signed-off-by:
-
Steven Rostedt authored
Signed-off-by:
-
Steven Rostedt authored
Signed-off-by:
-
Steven Rostedt authored
Signed-off-by:
-
Steven Rostedt authored
This patch fixes some bugs to the updating of the max trace that was caused by implementing the new buffering. Signed-off-by:
-
Steven Rostedt authored
Using raw_local_irq_save/restore confuses lockdep. It's fine to use the normal ones. Signed-off-by:
-
Steven Rostedt authored
Add notrace annotations to lockdep to keep ftrace from causing recursive problems with lock tracing and debugging. Signed-off-by:
-
Steven Rostedt authored
The irqsoff function tracer did a __get_cpu_var to determine if it should trace the function or not. The problem is that __get_cpu_var can preempt between getting the CPU and reading the cpu variable. This means that the cpu variable that is being read is not from the cpu being run on. At worst, this can give a false positive, where we trace the function when we should not. It will never give a false negative since we only want to trace when interrupts are disabled and we never preempt when they are. This fix adds a check after reading the irq flags to only trace if the interrupts are actually disabled. It also changes the reading of the cpu variable to use a raw_smp_processor_id since we now don't care if we preempt. We still catch that fact. Signed-off-by:
-
Steven Rostedt authored
The debug smp_processor_id caused a recursive fault in debugging the irqsoff tracer. The tracer used a smp_processor_id in the ftrace callback, and this function called preempt_disable which also is traced. This caused a recursive fault (stack overload). Since using smp_processor_id without debugging on does not cause faults with the tracer (even when the tracer is wrong), the debug version should not cause a system reboot. This changes the debug_smp_processor_id to use the notrace versions of preempt_disable and enable. Signed-off-by:
-
Ingo Molnar authored
disable the tracer while kexec pulls the rug from under the old kernel. Signed-off-by:
-
Steven Rostedt authored
Allocating large buffers for the tracer may fail easily. This patch converts the buffer from a large ordered allocation to single pages. It uses the struct page LRU field to link the pages together. Later patches may also implement dynamic increasing and decreasing of the trace buffers. Signed-off-by:
-
Steven Rostedt authored
This patch adds two files to the debugfs system: /debugfs/tracing/available_filter_functions and /debugfs/tracing/set_ftrace_filter The available_filter_functions lists all functions that has been recorded by the ftraced that has called the ftrace_record_ip function. This is to allow users to see what functions have been converted to nops and can be enabled for tracing. To enable functions, simply echo the names (whitespace delimited) into set_ftrace_filter. Simple wildcards are also allowed. echo 'scheduler' > /debugfs/tracing/set_ftrace_filter Will have only the scheduler be activated when tracing is enabled. echo 'sched_*' > /debugfs/tracing/set_ftrace_filter Will have only the functions starting with 'sched_' be activated. echo '*lock' > /debugfs/tracing/set_ftrace_filter Will have only functions ending with 'lock' be activated. echo '*lock*' > /debugfs/tracing/set_ftrace_filter Will have only functions with 'lock' in its name be activated. Note: 'sched*lock' will not work. The only wildcards that are allowed is an asterisk and the beginning and or end of the string passed in. Multiple names can be passed in with whitespace delimited: echo 'scheduler *lock *acpi*' > /debugfs/tracing/set_ftrace_filter is also the same as: echo 'scheduler' > /debugfs/tracing/set_ftrace_filter echo '*lock' >> /debugfs/tracing/set_ftrace_filter echo '*acpi*' >> /debugfs/tracing/set_ftrace_filter Appending does just that. It appends to the list. To disable all filters simply echo an empty line in: echo > /debugfs/tracing/set_ftrace_filter Signed-off-by:
-
Steven Rostedt authored
This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by:
-
Steven Rostedt authored
This patch moves the memory management of the ftrace records out of the arch code and into the generic code making the arch code simpler. Signed-off-by:
-
Steven Rostedt authored
This patch patches the call to mcount with nops instead of a jmp over the mcount call. Signed-off-by:
-
Steven Rostedt authored
This patch adds back the sysctl ftrace_enabled. This time it is defaulted to on, if DYNAMIC_FTRACE is configured. When ftrace_enabled is disabled, the ftrace function is set to the stub return. If DYNAMIC_FTRACE is also configured, on ftrace_enabled = 0, the registered ftrace functions will all be set to jmps, but no more new calls to ftrace recording (used to find the ftrace calling sites) will be called. Signed-off-by:
-
Steven Rostedt authored
This patch adds a feature to dynamically replace the ftrace code with the jmps to allow a kernel with ftrace configured to run as fast as it can without it configured. The way this works, is on bootup (if ftrace is enabled), a ftrace function is registered to record the instruction pointer of all places that call the function. Later, if there's still any code to patch, a kthread is awoken (rate limited to at most once a second) that performs a stop_machine, and replaces all the code that was called with a jmp over the call to ftrace. It only replaces what was found the previous time. Typically the system reaches equilibrium quickly after bootup and there's no code patching needed at all. e.g. call ftrace /* 5 bytes */ is replaced with jmp 3f /* jmp is 2 bytes and we jump 3 forward */ 3: When we want to enable ftrace for function tracing, the IP recording is removed, and stop_machine is called again to replace all the locations of that were recorded back to the call of ftrace. When it is disabled, we replace the code back to the jmp. Allocation is done by the kthread. If the ftrace recording function is called, and we don't have any record slots available, then we simply skip that call. Once a second a new page (if needed) is allocated for recording new ftrace function calls. A large batch is allocated at boot up to get most of the calls there. Because we do this via stop_machine, we don't have to worry about another CPU executing a ftrace call as we modify it. But we do need to worry about NMI's so all functions that might be called via nmi must be annotated with notrace_nmi. When this code is configured in, the NMI code will not call notrace. Signed-off-by:
-
Steven Rostedt authored
Add preempt off timings. A lot of kernel core code is taken from the RT patch latency trace that was written by Ingo Molnar. This adds "preemptoff" and "preemptirqsoff" to /debugfs/tracing/available_tracers Now instead of just tracing irqs off, preemption off can be selected to be recorded. When this is selected, it shares the same files as irqs off timings. One can either trace preemption off, irqs off, or one or the other off. By echoing "preemptoff" into /debugfs/tracing/current_tracer, recording of preempt off only is performed. "irqsoff" will only record the time irqs are disabled, but "preemptirqsoff" will take the total time irqs or preemption are disabled. Runtime switching of these options is now supported by simpling echoing in the appropriate trace name into /debugfs/tracing/current_tracer. Signed-off-by:
-
