- 29 Jun, 2019 11 commits
-
-
Mike Marciniszyn authored
This patch enhances the MR trace information to enable more focused debug of MR issues. Reviewed-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Mike Marciniszyn authored
This was missed in the original implementation of the memory management extensions. Fixes: 0db3dfa0 ("IB/hfi1: Work request processing for fast register mr and invalidate") Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
-
Michael J. Ruhl authored
Uninline the aspm API since it increases code space for no reason. Move the aspm module param to the new aspm C file. Reviewed-by:
-
Michael J. Ruhl authored
Add some helper functions to hide struct rvt_swqe details. Reviewed-by:
-
Michael J. Ruhl authored
Historically rdmavt destroy_ah() has returned an -EBUSY when the AH has a non-zero reference count. IBTA 11.2.2 notes no such return value or error case: Output Modifiers: - Verb results: - Operation completed successfully. - Invalid HCA handle. - Invalid address handle. ULPs never test for this error and this will leak memory. The reference count exists to allow for driver independent progress mechanisms to process UD SWQEs in parallel with post sends. The SWQE will hold a reference count until the UD SWQE completes and then drops the reference. Fix by removing need to reference count the AH. Add a UD specific allocation to each SWQE entry to cache the necessary information for independent progress. Copy the information during the post send processing. Reviewed-by:
-
Michael J. Ruhl authored
Currently QP allowed_ops is set after the QP is completely initialized. This curtails the use of this optimization for any initialization before allowed_ops is set. Fix by adding a helper to determine the correct allowed_ops and moving the setting of the allowed_ops to just after QP allocation. Reviewed-by:
-
Kamenee Arumugam authored
When a completion queue is full, the associated queue pairs are not put into the error state. According to the IBTA specification, this is a violation. Quote from IBTA spec: C9-218: A Requester Class F error occurs when the CQ is inaccessible or full and an attempt is made to complete a WQE. The Affected QP shall be moved to the error state and affiliated asynchronous errors generated as described in 11.6.3.1 Affiliated Asynchronous Events on page 678. The current WQE and any subsequent WQEs are left in an unknown state. C11-37: The CI shall generate a CQ Error when a CQ overrun is detected. This condition will result in an Affiliated Asynchronous Error for any associated Work Queues when they attempt to use that CQ. Completions can no longer be added to the CQ. It is not guaranteed that completions present in the CQ at the time the error occurred can be retrieved. Possible causes include a CQ overrun or a CQ protection error. Put the qp in error state when cq is full. Implement a state called full to continue to put other associated QPs in error state. Reviewed-by:
Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by:
-
Kamenee Arumugam authored
Usage of single lock prevents fetching posted and processing receive work queue entries from progressing simultaneously and impacts overall performance. Fracture the single lock used for posting and processing Receive Work Queue Entries (RWQEs) to allow the circular buffer to be filled and emptied at the same time. Two new spinlocks - one for the producers and one for the consumers used for posting and processing RWQEs simultaneously and the two indices are define on two different cache lines. The threshold count is used to avoid reading other index in different cache line every time. Signed-off-by:
Harish Chegondi <harish.chegondi@intel.com> Signed-off-by:
-
Kamenee Arumugam authored
The rvt_rwqe and rvt_rwq struct elements are shared between rdmavt and the providers but are not in uapi directory. As per the comment in https://marc.info/?l=linux-rdma&m=152296522708522&w=2, The hfi1 driver and the rdma core driver are not using shared structures in the uapi directory. Move rvt_rwqe and rvt_rwq struct into rvt-abi.h header in uapi directory. Reviewed-by:
-
Kamenee Arumugam authored
The rvt_cq_wc struct elements are shared between rdmavt and the providers but not in uapi directory. As per the comment in https://marc.info/?l=linux-rdma&m=152296522708522&w=2 The hfi1 driver and the rdma core driver are not using shared structures in the uapi directory. In that case, move rvt_cq_wc struct into the rvt-abi.h header file and create a rvt_k_cq_w for the kernel completion queue. Signed-off-by:
-
Jason Gunthorpe authored
For dependencies in next patches. Resolve conflicts: - Use uverbs_get_cleared_udata() with new cq allocation flow - Continue to delete nes despite SPDX conflict - Resolve list appends in mlx5_command_str() - Use u16 for vport_rule stuff - Resolve list appends in struct ib_client Signed-off-by:
-
- 25 Jun, 2019 6 commits
-
-
Colin Ian King authored
There is a spelling mistake in an dev_err message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Doug Ledford authored
For all string attributes for which we don't currently accept the element as input, we only use it as output, set the string length to RDMA_NLDEV_ATTR_EMPTY_STRING which is defined as 1. That way we will only accept a null string for that element. This will prevent someone from writing a new input routine that uses the element without also updating the policy to have a valid value. Also while there, make sure the existing entries that are valid have the correct policy, if not, correct the policy. Remove unnecessary checks for nla_strlcpy() overflow once the policy has been set correctly. Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Lijun Ou authored
This patch removes the hns-roce.ko for cleanup all the exported symbols in common part. Signed-off-by:
Xi Wang <wangxi11@huawei.com> Signed-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
The InfiniBand docs are plain text with no markups. So, all we needed to do were to add the title markups and some markup sequences in order to properly parse tables, lists and literal blocks. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Dan Carpenter authored
This function is supposed to return negative kernel error codes but here it returns CMD_RST_PRC_EBUSY (2). The error code eventually gets passed to IS_ERR() and since it's not an error pointer it leads to an Oops in hns_roce_v1_rsv_lp_qp() Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Colin Ian King authored
There is a potential integer overflow when int i is left shifted as this is evaluated using 32 bit arithmetic but is being used in a context that expects an expression of type dma_addr_t. Fix this by casting integer i to dma_addr_t before shifting to avoid the overflow. Addresses-Coverity: ("Unintentional integer overflow") Fixes: 2ac0bc5e ("RDMA/hns: Add a group interfaces for optimizing buffers getting flow") Signed-off-by:
-
- 24 Jun, 2019 21 commits
-
-
Max Gurtovoy authored
Improve code readability using static helpers for each memory region type. Re-use the common logic to get smaller functions that are easy to maintain and reduce code duplication. Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
Israel Rukshin <israelr@mellanox.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Max Gurtovoy authored
If possibe, avoid doing a UMR operation to register data and protection buffers (via MTT/KLM mkeys). Instead, use the local DMA key and map the SG lists using PA access. This is safe, since the internal key for data and protection never exposed to the remote server (only signature key might be exposed). If PA mappings are not possible, perform mapping using MTT/KLM descriptors. The setup of the tested benchmark (using iSER ULP): - 2 servers with 24 cores (1 initiator and 1 target) - ConnectX-4/ConnectX-5 adapters - 24 target sessions with 1 LUN each - ramdisk backstore - PI active Performance results running fio (24 jobs, 128 iodepth) using write_generate=1 and read_verify=1 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1266.4K/1262.4K 1720.1K/1732.1K 4k 793139/570902 1129.6K/773982 32k 72660/72086 97229/96164 Using write_generate=0 and read_verify=0 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1590.2K/1600.1K 1828.2K/1830.3K 4k 1078.1K/937272 1142.1K/815304 32k 77012/77369 98125/97435 Signed-off-by:
-
Israel Rukshin authored
In some loads, there is performance degradation when using KLM mkey instead of MTT mkey. This is because KLM descriptor access is via indirection that might require more HW resources and cycles. Using KLM descriptor is not necessary when there are no gaps at the data/metadata sg lists. As an optimization, use MTT mkey whenever it is possible. For that matter, allocate internal MTT mkey and choose the effective pi_mr for in transaction according to the required mapping scheme. The setup of the tested benchmark (using iSER ULP): - 2 servers with 24 cores (1 initiator and 1 target) - ConnectX-4/ConnectX-5 adapters - 24 target sessions with 1 LUN each - ramdisk backstore - PI active Performance results running fio (24 jobs, 128 iodepth) using write_generate=1 and read_verify=1 (w/w.o/baseline): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1262.4K/1243.3K/1147.1K 1732.1K/1725.1K/1423.8K 4k 570902/571233/457874 773982/743293/642080 32k 72086/72388/71933 96164/71789/93249 Using write_generate=0 and read_verify=0 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1600.1K/1572.1K/1393.3K 1830.3K/1823.5K/1557.2K 4k 937272/921992/762934 815304/753772/646071 32k 77369/75052/72058 97435/73180/94612 Signed-off-by:
Idan Burstein <idanb@mellanox.com> Reviewed-by:
-
Israel Rukshin authored
IB_WR_REG_SIG_MR is not needed after IB_WR_REG_MR_INTEGRITY was used. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Israel Rukshin authored
Replace the old signature handover API with the new one. The new API simplifes PI handover code complexity for ULPs and improve performance. For RW API it will reduce the maximum number of work requests per task and the need of dealing with multiple MRs (and their registrations and invalidations) per task. All the mappings and registration of the data and the protection buffers is done by the LLD using a single WR and a special MR type (IB_MR_TYPE_INTEGRITY) for the PI handover operation. The setup of the tested benchmark (using iSER ULP): - 2 servers with 24 cores (1 initiator and 1 target) - ConnectX-4/ConnectX-5 adapters - 24 target sessions with 1 LUN each - ramdisk backstore - PI active Performance results running fio (24 jobs, 128 iodepth) using write_generate=1 and read_verify=1 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1243.3K/1182.3K 1725.1K/1680.2K 4k 571233/528835 743293/748259 32k 72388/71086 71789/93573 Using write_generate=0 and read_verify=0 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1572.1K/1427.2K 1823.5K/1724.3K 4k 921992/916194 753772/768267 32k 75052/73960 73180/95484 There is a performance degradation when writing big block sizes. Degradation is caused by the complexity of combining multiple indirections and perform RDMA READ operation from it. This will be fixed in the following patches by reducing the indirections if possible. Signed-off-by:
-
Israel Rukshin authored
This is a preparation for adding new signature API to the rw-API. Signed-off-by:
-
Max Gurtovoy authored
Protect the case that a ULP tries to allocate a QP with signature enabled flag while the LLD doesn't support this feature. While we're here, also move integrity_en attribute from mlx5_qp to ib_qp as a preparation for adding new integrity API to the rw-API (that is part of ib_core module). Signed-off-by:
-
Israel Rukshin authored
Rename IB_QP_CREATE_SIGNATURE_EN to IB_QP_CREATE_INTEGRITY_EN and IB_DEVICE_SIGNATURE_HANDOVER to IB_DEVICE_INTEGRITY_HANDOVER. Signed-off-by:
-
Israel Rukshin authored
This is a preparation for adding new signature API to the rw-API. Signed-off-by:
-
Israel Rukshin authored
After decreasing WRs array size from 7 to 3 it is more readable to give each WR a descriptive name. Signed-off-by:
-
Israel Rukshin authored
Using this new API reduces iSER code complexity. It also reduces the maximum number of work requests per task and the need of dealing with multiple MRs (and their registrations and invalidations) per task. It is done by using a single WR and a special MR type (IB_MR_TYPE_INTEGRITY) for PI operation. The setup of the tested benchmark: - 2 servers with 24 cores (1 initiator and 1 target) - 24 target sessions with 1 LUN each - ramdisk backstore - PI active Performance results running fio (24 jobs, 128 iodepth) using write_generate=0 and read_verify=0 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1236.6K/1164.3K 1357.2K/1332.8K 1k 1196.5K/1163.8K 1348.4K/1262.7K 2k 1016.7K/921950 1003.7K/931230 4k 662728/600545 595423/501513 8k 385954/384345 333775/277090 16k 222864/222820 170317/170671 32k 116869/114896 82331/82244 64k 55205/54931 40264/40021 Using write_generate=1 and read_verify=1 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1090.1K/1030.9K 1303.9K/1101.4K 1k 1057.7K/904583 1318.4K/988085 2k 965226/638799 1008.6K/692514 4k 555479/410151 542414/414517 8k 298675/224964 264729/237508 16k 133485/122481 164625/138647 32k 74329/67615 80143/78743 64k 35716/35519 39294/37334 We get performance improvement at all block sizes. The most significant improvement is when writing 4k bs (almost 30% more iops). Signed-off-by:
-
Max Gurtovoy authored
This new WR will be used to perform PI (protection information) handover using the new API. Using the new API, the user will post a single WR that will internally perform all the needed actions to complete PI operation. This new WR will use a memory region that was allocated as IB_MR_TYPE_INTEGRITY and was mapped using ib_map_mr_sg_pi to perform the registration. In the old API, in order to perform a signature handover operation, each ULP should perform the following: 1. Map and register the data buffers. 2. Map and register the protection buffers. 3. Post a special reg WR to configure the signature handover operation layout. 4. Invalidate the signature memory key. 5. Invalidate protection buffers memory key. 6. Invalidate data buffers memory key. In the new API, the mapping of both data and protection buffers is performed using a single call to ib_map_mr_sg_pi function. Also the registration of the buffers and the configuration of the signature operation layout is done by a single new work request called IB_WR_REG_MR_INTEGRITY. This patch implements this operation for mlx5 devices that are capable to offload data integrity generation/validation while performing the actual buffer transfer. This patch will not remove the old signature API that is used by the iSER initiator and target drivers. This will be done in the future. In the internal implementation, for each IB_WR_REG_MR_INTEGRITY work request, we are using a single UMR operation to register both data and protection buffers using KLM's. Afterwards, another UMR operation will describe the strided block format. These will be followed by 2 SET_PSV operations to set the memory/wire domains initial signature parameters passed by the user. In the end of the whole transaction, only the signature memory key (the one that exposed for the RDMA operation) will be invalidated. Signed-off-by:
-
Max Gurtovoy authored
Explicitly pass the sig_mr and the access flags for the mkey segment configuration. This function will be used also in the new signature API, so modify it in order to use it in both APIs. This is a preparation commit before adding new signature API. Signed-off-by:
-
Max Gurtovoy authored
UMR ctrl segment flags can vary between UMR operations. for example, using inline UMR or adding free/not-free checks for a memory key. This is a preparation commit before adding new signature API that will not need not-free checks for the internal memory key during the UMR operation. Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
-
Max Gurtovoy authored
PI offload (protection information) is a feature that each RDMA provider can implement differently. Thus, introduce new device attribute to define the maximal length of the page list for PI fast registration operation. For example, mlx5 driver uses a single internal MR to map both data and protection SGL's, so it's equal to max_fast_reg_page_list_len / 2. Signed-off-by:
-
Max Gurtovoy authored
mlx5_ib_map_mr_sg_pi() will map the PI and data dma mapped SG lists to the mlx5 memory region prior to the registration operation. In the new API, the mlx5 driver will allocate an internal memory region for the UMR operation to register both PI and data SG lists. The internal MR will use KLM mode in order to map 2 (possibly non-contiguous/non-align) SG lists using 1 memory key. In the new API, each ULP will use 1 memory region for the signature operation (instead of 3 in the old API). This memory region will have a key that will be exposed to remote server to perform RDMA operation. The internal memory key that will map the SG lists will stay private. Signed-off-by:
-
Max Gurtovoy authored
This element will describe the needed characteristics for the signature operation per signature enabled memory region (type IB_MR_TYPE_INTEGRITY). Also add meta_length attribute to ib_sig_attrs structure for saving the mapped metadata length (needed for the new API implementation). Signed-off-by:
-
Max Gurtovoy authored
This function will map the previously dma mapped SG lists for PI (protection information) and data to an appropriate memory region for future registration. The given MR must be allocated as IB_MR_TYPE_INTEGRITY. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
-
Israel Rukshin authored
This is a preparation for signature verbs API re-design. In the new design a single MR with IB_MR_TYPE_INTEGRITY type will be used to perform the needed mapping for data integrity operations. Signed-off-by:
-
Max Gurtovoy authored
This is a preparation for the signature verbs API change. This change is needed since the MR type will define, in the upcoming patches, the need for allocating internal resources in LLD for signature handover related operations. It will also help to make sure that signature related functions are called with an appropriate MR type and fail otherwise. Also introduce new mr types IB_MR_TYPE_USER, IB_MR_TYPE_DMA and IB_MR_TYPE_DM for correctness. Signed-off-by:
-
Max Gurtovoy authored
Ease the exhausted ib_verbs.h file and make the code more readable. Signed-off-by:
-
- 22 Jun, 2019 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fix from Joerg Roedel: "Revert a commit from the previous pile of fixes which causes new lockdep splats. It is better to revert it for now and work on a better and more well tested fix" * tag 'iommu-fix-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: Revert "iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock"
-
