Skip to content

L
linux
Switch branch/tag
  1. 14 Feb, 2012 8 commits
    • Bjorn Helgaas's avatar
      x86/PCI: don't fall back to defaults if _CRS has no apertures · 316d86fe
      Bjorn Helgaas authored 
      Host bridges that lead to things like the Uncore need not have any
I/O port or MMIO apertures.  For example, in this case:

    ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
    PCI: root bus ff: using default resources
    PCI host bridge to bus 0000:ff
    pci_bus 0000:ff: root bus resource [io  0x0000-0xffff]
    pci_bus 0000:ff: root bus resource [mem 0x00000000-0x3fffffffffff]

we should not pretend those default resources are available on bus ff.

CC: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
      316d86fe
    • Konrad Rzeszutek Wilk's avatar
      xen/pciback: Support pci_reset_function, aka FLR or D3 support. · 11608318
      Konrad Rzeszutek Wilk authored 
      We use the __pci_reset_function_locked to perform the action.
Also on attaching ("bind") and detaching ("unbind") we save and
restore the configuration states. When the device is disconnected
from a guest we use the "pci_reset_function" to also reset the
device before being passed to another guest.
Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
      11608318
    • Konrad Rzeszutek Wilk's avatar
      PCI: Introduce __pci_reset_function_locked to be used when holding device_lock. · 6fbf9e7a
      Konrad Rzeszutek Wilk authored 
      The use case of this is when a driver wants to call FLR when a device
is attached to it using the SysFS "bind" or "unbind" functionality.

The call chain when a user does "bind" looks as so:

 echo "0000:01.07.0" > /sys/bus/pci/drivers/XXXX/bind

and ends up calling:
  driver_bind:
    device_lock(dev);  <=== TAKES LOCK
    XXXX_probe:
         .. pci_enable_device()
         ...__pci_reset_function(), which calls
                 pci_dev_reset(dev, 0):
                        if (!0) {
                                device_lock(dev) <==== DEADLOCK

The __pci_reset_function_locked function allows the the drivers
'probe' function to call the "pci_reset_function" while still holding
the driver mutex lock.
Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
      6fbf9e7a
    • Julia Lawall's avatar
      PCI: drivers/pci/hotplug/ibmphp_ebda.c: add missing iounmap · 8f0cdddc
      Julia Lawall authored 
      Add missing iounmap in error handling code, in a case where the function
already preforms iounmap on some other execution path.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
statement S,S1;
int ret;
@@
e = \(ioremap\|ioremap_nocache\)(...)
... when != iounmap(e)
if (<+...e...+>) S
... when any
    when != iounmap(e)
*if (...)
   { ... when != iounmap(e)
     return ...; }
... when any
iounmap(e);
// </smpl>
Signed-off-by: default avatarJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
      8f0cdddc
    • Amos Kong's avatar
      PCI: Can continually add funcs after adding func0 · f382a086
      Amos Kong authored 
      Boot up a KVM guest, and hotplug multifunction
devices(func1,func2,func0,func3) to guest.

for i in 1 2 0 3;do
qemu-img create /tmp/resize$i.qcow2 1G -f qcow2
(qemu) drive_add 0x11.$i id=drv11$i,if=none,file=/tmp/resize$i.qcow2
(qemu) device_add virtio-blk-pci,id=dev11$i,drive=drv11$i,addr=0x11.$i,multifunction=on
done

In linux kernel, when func0 of the slot is hot-added, the whole
slot will be marked as 'enabled', then driver will ignore other new
hotadded funcs.
But in Win7 & WinXP, we can continaully add other funcs after adding
func0, all funcs will be added in guest.

drivers/pci/hotplug/acpiphp_glue.c:
static int acpiphp_check_bridge(struct acpiphp_bridge *bridge)
{
....
        for (slot = bridge->slots; slot; slot = slot->next) {
                if (slot->flags & SLOT_ENABLED) {
                        acpiphp_disable_slot()
                else
                        acpiphp_enable_slot()
....                              |
}                                 v
                            enable_device()
                                  |
                                  v
        //only don't enable slot if func0 is not added
	list_for_each_entry(func, &slot->funcs, sibling) {
               ...
        }
       slot->flags |= SLOT_ENABLED; //mark slot to 'enabled'

This patch just make pci driver can continaully add funcs after adding
func 0. Only mark slot to 'enabled' when all funcs are added.

For pci multifunction hotplug, we can add functions one by one(func 0 is
necessary), and all functions will be removed in one time.
Signed-off-by: default avatarAmos Kong <akong@redhat.com>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
      f382a086
    • Myron Stowe's avatar
      x86/PCI: Convert maintaining FW-assigned BIOS BAR values to use a list · 6535943f
      Myron Stowe authored 
      This patch converts the underlying maintenance aspects of FW-assigned
BIOS BAR values from a statically allocated array within struct pci_dev
to a list of temporary, stand alone, entries.
Signed-off-by: default avatarMyron Stowe <myron.stowe@redhat.com>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
      6535943f
    • Myron Stowe's avatar
      x86/PCI: Infrastructure to maintain a list of FW-assigned BIOS BAR values · 925845bd
      Myron Stowe authored 
      Commit 58c84eda introduced functionality to try and reinstate the
original BIOS BAR addresses of a PCI device when normal resource
assignment attempts fail.  To keep track of the BIOS BAR addresses,
struct pci_dev was augmented with an array to hold the BAR addresses
of the PCI device: 'resource_size_t fw_addr[DEVICE_COUNT_RESOURCE]'.

The reinstatement of BAR addresses is an uncommon event leaving the
'fw_addr' array unused under normal circumstances.  This functionality
is also currently architecture specific with an implementation limited
to x86.  As the use of struct pci_dev is so prevalent, having the
'fw_addr' array residing within such seems somewhat wasteful.

This patch introduces a stand alone data structure and interfacing
routines for maintaining a list of FW-assigned BIOS BAR value entries.
Signed-off-by: default avatarMyron Stowe <myron.stowe@redhat.com>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
      925845bd
    • Myron Stowe's avatar
      PCI: Fix starting basis for resource requests · 351fc6d1
      Myron Stowe authored 
      pci_revert_fw_address() is used to reinstate a PCI device's original
FW-assigned BIOS BAR value(s) if normal resource assignment fails.

When attempting to reinstate an address, the point within the resource
tree from which to attempt the new resource request should be the parent
resource corresponding to the device, not the base of the resource tree
(ioport_resource or iomem_resource).  For PCI devices this would
typically be the resource corresponding to the upstream PCI host bridge
or P2P bridge aperture.

This patch sets the point within the resource tree to attempt a new
resource assignment request to the PCI device's parent resource and only
if that fails does it fall back to the base ioport_resource or
iomem_resource.
Signed-off-by: default avatarMyron Stowe <myron.stowe@redhat.com>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
      351fc6d1
  3. 10 Feb, 2012 3 commits
    • Yinghai Lu's avatar
      PCI: Fix pci cardbus removal · 3682a394
      Yinghai Lu authored 
      During test busn_res allocation with cardbus, found pci card removal is not
working anymore, and it turns out it is broken by:

|commit 79cc9601
|Date:   Tue Nov 22 21:06:53 2011 -0800
|
|    PCI: Only call pci_stop_bus_device() one time for child devices at remove

The above changed the behavior of pci_remove_behind_bridge that
yenta_cardbus depended on.  So restore the old behavoir of
pci_remove_behind_bridge (which requires stopping and removing of all
devices) by:

1. rename pci_remove_behind_bridge to __pci_remove_behind_bridge, and let
   __pci_remove_bus_device() call it instead.
2. add pci_stop_behind_bridge that will stop devices behind a bridge
3. add back pci_remove_behind_bridge that will stop and remove devices
   under bridge.

-v2: update commit description a little bit.
Tested-by: default avatarDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: default avatarYinghai Lu <yinghai@kernel.org>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
      3682a394
    • Vaidyanathan Srinivasan's avatar
      PCI: set pci sriov page size before reading SRIOV BAR · 8161fe91
      Vaidyanathan Srinivasan authored 
      For an SRIOV device, PCI_SRIOV_SYS_PGSIZE should be set before
the PCI_SRIOV_BAR are queried.  The sys pagesize defaults to 4k,
so this change is required on powerpc box with 64k base page size.
    
This is a regression caused due to moving SRIOV init to sriov_enable().
    
| commit afd24ece
| Author: Ram Pai <linuxram@us.ibm.com>
    
| PCI: delay configuration of SRIOV capability
| The SRIOV capability, namely page size and total_vfs of a device are
| configured during enumeration phase of the device.  This can potentially
| interfere with the PCI operations of the platform, if the IOV capability
| of the device is not enabled.
Signed-off-by: default avatarVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: default avatarRam Pai <linuxram@us.ibm.com>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
      8161fe91
    • Yinghai Lu's avatar
      PCI: workaround hard-wired bus number V2 · 71f6bd4a
      Yinghai Lu authored 
      Fixes PCI device detection on IBM xSeries IBM 3850 M2 / x3950 M2
when using ACPI resources (_CRS).
This is default, a manual workaround (without this patch)
would be pci=nocrs boot param.

V2: Add dev_warn if the workaround is hit. This should reveal
how common such setups are (via google) and point to possible
problems if things are still not working as expected.
-> Suggested by Jan Beulich.

Cc: stable@vger.kernel.org
Tested-by: garyhade@us.ibm.com
Signed-off-by: default avatarYinghai Lu <yinghai.lu@oracle.com>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
      71f6bd4a
  5. 27 Jan, 2012 11 commits
  7. 26 Jan, 2012 14 commits
  9. 25 Jan, 2012 4 commits
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs · aaad641e
      Linus Torvalds authored 
      Quoth Ben Myers:
 "Please pull in the following bugfix for xfs.  We forgot to drop a lock on
  error in xfs_readlink.  It hasn't been through -next yet, but there is no
  -next tree tomorrow.  The fix is clear so I'm sending this request today."

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: Fix missing xfs_iunlock() on error recovery path in xfs_readlink()
      aaad641e
    • Linus Torvalds's avatar
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · 74a7f6a0
      Linus Torvalds authored 
      * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/ttm: fix two regressions since move_notify changes
  drm/radeon: avoid deadlock if GPU lockup is detected in ib_pool_get
  drm/radeon: silence out possible lock dependency warning
  drm: Fix authentication kernel crash
  gma500: Fix shmem mapping
  drm/radeon/kms: refine TMDS dual link checks
  drm/radeon/kms: use drm_detect_hdmi_monitor for picking encoder mode
  drm/radeon/kms: rework modeset sequence for DCE41 and DCE5
  drm/radeon/kms: move panel mode setup into encoder mode set
  drm/radeon/kms: move disp eng pll setup to init path
  drm/radeon: finish getting bios earlier
  drm/radeon: fix invalid memory access in radeon_atrm_get_bios()
  drm/radeon/kms: add some missing semaphore init
  drm/radeon/kms: Add an MSI quirk for Dell RS690
  gpu, drm, sis: Don't return uninitialized variable from sis_driver_load()
      74a7f6a0
    • Linus Torvalds's avatar
      Merge branch 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound · 486bc794
      Linus Torvalds authored 
      * 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: wm2000: Fix use-after-free - don't release_firmware() twice on error
  ASoC: wm8958: Use correct format string in dev_err() call
  ASoC: wm8996: Call _POST_PMU callback for CPVDD
  ASoC: mxs: Fix mxs-saif timeout
  ASoC: Disable register synchronisation for low frequency WM8996 SYSCLK
  ASoC: Don't go through cache when applying WM5100 rev A updates
  ASoC: Mark WM5100 register map cache only when going into BIAS_OFF
  ASoC: tlv320aic32x4: always enable analouge block
  ASoC: tlv320aic32x4: always enable dividers
  ASoC: sgtl5000: Fix wrong register name in restore
      486bc794
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap · 7ca4e8c4
      Linus Torvalds authored 
      A fairly simple bugfix for a WARN_ON() which was triggered in the cache
reset support as a result of some subsequent work.  There's only one
mainline user for the code path that's updated right now (wm8994) so
should be low risk.

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Reset cache status when reinitialsing the cache
      7ca4e8c4
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7