Merge tag 'v4.21-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

RV1108 improvements (uart-dma, clocks, interrupt numbers, gmac support
timer and emmc pins) from its first real-world user.
RK3188 improvements (OPPv2, cpu node updates) to prepare for a new
devicetree, the BQ Edison 2 Quad-Core.
VPU device node for rk3288, right now only the jpeg encoder part
will be in the kernel but hopefully other codecs will follow.

* tag 'v4.21-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Add internal timer support for rv1108
  ARM: dts: rockchip: add BQ Edison 2 QC devicetree
  ARM: dts: rockchip: add VPU device node for RK3288
  ARM: dts: rockchip: update cpu supplies on rk3188
  ARM: dts: rockchip: add phandles to secondary cpu cores
  ARM: dts: rockchip: add cpu-core resets for rk3188
  ARM: dts: rockchip: convert rk3188 to opp-v2
  ARM: dts: rockchip: add #sound-dai-cells to Cortex-A9 i2s
  ARM: dts: rockchip: Add UART DMA support for rv1108
  ARM: dts: rockchip: Assign the proper GPIO clocks for rv1108
  ARM: dts: rockchip: Fix the PMU interrupt number for rv1108
  ARM: dts: rockchip: Pass the 'arm,cpu-registers-not-fw-configured' property on rv1108
  ARM: dts: rockchip: Pass the 'clock-latency' property on rv1108
  ARM: dts: rockchip: Add rv1108 GMAC support
  ARM: dts: rockchip: add rv1108 eMMC pin settings
Signed-off-by: Olof Johansson <olof@lixom.net>

AT91 DT for 4.21

 - Switch most platforms to the new clock binding
 - Small improvement for Axentia nattis

* tag 'at91-4.21-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: nattis: initialize the BLON pin as output-low early
  ARM: dts: at91: at91sam9rl: switch to new clock bindings
  ARM: dts: at91: at91sam9x5: switch to new clock bindings
  ARM: dts: at91: at91sam9263: switch to new clock bindings
  ARM: dts: at91: at91sam9261: switch to new clock bindings
  ARM: dts: at91: at91sam9260: switch to new clock bindings
  ARM: dts: at91: sama5d2: switch to new clock binding
  ARM: dts: at91: sama5d4: switch to new clock bindings
  ARM: dts: at91: sama5d2: use the divided clock for SMC
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

ARM: dts: Amlogic updates for v4.21, round 2

Highlights
- add CPU OPP tables
- timers: add global timer and TWD

* tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson: meson8b: add the CPU OPP tables
  ARM: dts: meson: meson8: add the CPU OPP table
  ARM: dts: meson8b: add the Cortex-A5 global timer
  ARM: dts: meson8b: add the ARM TWD timer
  ARM: dts: meson8: add the Cortex-A9 global timer
  ARM: dts: meson8: add the ARM TWD timer
  ARM: dts: meson: group the Cortex-A5 / Cortex-A9 peripherals
  dt-bindings: clock: meson8b: export the CPU post dividers
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'uniphier-dt-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt

UniPhier ARM SoC DT updates for v4.21

- Add bindings for all SoCs/boards of UniPhier platform

- Move binding docs to socionext directory

- Add all CPUs in cooling maps

- Add MIO DMAC nodes

* tag 'uniphier-dt-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  ARM: dts: uniphier: add MIO DMAC nodes
  arm64: dts: uniphier: Add all CPUs in cooling maps
  ARM: dts: uniphier: Add all CPUs in cooling maps
  dt-bindings: uniphier: move cache-uniphier.txt to vendor directory
  dt-bindings: uniphier: add bindings for UniPhier SoC family
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-dt64-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Freescale arm64 device tree update for 4.21:
 - Add device tree for LS1028A SoC and NXP FRWY & QDS boards support
   based on this SoC.
 - Add device tree for LX2160A SoC and NXP QDS & RDB boards support
   based on this SoC.
 - Add qdma devices for LS1043A and LS1046A SoC.
 - Disable PCIe device by default in SoC device tree and let board level
   device tree to enable as needed.
 - Drop compatible string "snps,dw-pcie" from LayerScape PCIe devices to
   avoid incorrect matching.
 - Move fsl-mc device as a child node of soc node, and add missing
   dma-ranges property for LS1088A SoC.
 - Update LayerScape SoCs' cooling maps to include all devices affected
   by individual trip points.

* tag 'imx-dt64-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: ls1046a: add qdma device tree nodes
  arm64: dts: ls1043a: add qdma device tree nodes
  arm64: dts: ls1088a: Add missing dma-ranges property
  arm64: dts: ls1088a: Move fsl-mc node
  arm64: dts: fsl: Add all CPUs in cooling maps
  arm64: dts: Add support for NXP LS1028A SoC
  arm64: dts: layerscape: removed compatible string "snps,dw-pcie"
  arm64: dts: fsl: Add the status property disable PCIe
  arm64: dts: ls1012a: Add FRWY-LS1012A board support
  arm64: dts: add LX2160AQDS board support
  arm64: dts: add LX2160ARDB board support
  arm64: dts: add QorIQ LX2160A SoC support
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx7ulp-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

i.MX7ULP device tree for 4.21:
 - It includes the initial device tree for i.MX7ULP SoC and EVK board
   support.

* tag 'imx7ulp-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx: add imx7ulp evk support
  ARM: dts: imx: add common imx7ulp dtsi support
  dt-bindings: fsl: add imx7ulp pm related components bindings
  dt-bindings: fsl: add compatible for imx7ulp evk
  clk: imx: add imx7ulp clk driver
  clk: imx: implement new clk_hw based APIs
  clk: imx: make mux parent strings const
  dt-bindings: clock: add imx7ulp clock binding doc
  clk: imx: add imx7ulp composite clk support
  clk: imx: add pfdv2 support
  clk: imx: add pllv4 support
  clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support
  clk: imx: add gatable clock divider support
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx7d-pico-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

i.MX7D PICO boards update for 4.21:
 - It contains a series from Otavio Salvador that improves i.MX7D PICO
  SoM, and then adds Hobbit baseboard support on top of the improvement.

* tag 'imx7d-pico-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx7d-pico: Add the imx7d-pico-hobbit variant
  ARM: dts: imx7d-pico-pi: Extend peripherals support
  ARM: dts: imx7d-pico: Extend peripherals support
  ARM: dts: imx7d-pico: Improve WiFi regulator name
  ARM: dts: imx7d-pico: Pass the Ethernet PHY reset GPIO
  ARM: dts: imx7d-pico: Pass the USBOTG1_PWR pinctrl
  ARM: dts: imx7d-pico-pi: Move SoM related part to imx7d-pico.dtsi
  ARM: dts: imx7d-pico: Switch to SPDX identifier
  ARM: dts: imx7d-pico: Do not harcode the memory size
  ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
  ARM: imx: update the cpu power up timing setting on i.mx6sx
  ARM: dts: imx7d-pico: Describe the Wifi clock
  ARM: dts: imx51-zii-rdu1: Remove EEPROM node
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

i.MX device tree update for 4.21:
 - New boards support: emtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
   and vf610 based Liebherr's BK4 device, ZII SCU4 AIB board.
 - Add flexcan support for i.MX6UL SoC, turn on stop mode wakeup feature
   for flexcan, and enable devices on a few i.MX6 NXP boards.
 - Enable AUO G101EVN010 lcd panel and Goodix touch support for
   imx6ul-ccimx6ulsbcpro board.
 - Enable sensors support for imx6qdl-sabresd board: egalax touch, light,
   magnetometer and accelerometer sensor.
 - Switch more boards to use SPDX identifier.
 - Fix memory node duplication in i.MX device tree sources.
 - Correct GIC PPI interrupts mask for i.MX6UL and i.MX7 SoCs.
 - Drop 'snps,dw-pcie' compatible from LS1021A PCIe device to avoid
   incorrect device matching.
 - Add the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, which
   are now supported by the freedreno driver.
 - Add DCP device support for i.MX6ULL, which requires explicit clock
   enabling.
 - Add '#thermal-sensor-cells' for thermal device and '#cooling-cells'
   for cooling devices.
 - Add missing clock information for EPIT on i.MX25 SoC.
 - Add PWM and qdma devices for LS1021A SoC.
 - Update cooling maps of LS1021A SoC to include all devices affected by
   individual trip points.
 - Random device addition and cleanup on various boards.

* tag 'imx-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (82 commits)
  ARM: dts: imx51-zii-rdu1: Do not specify "power-gpio" for hpa1
  ARM: dts: imx6ul: Remove extra space between node name and brace
  ARM: dts: imx6qdl-sabresd: Use GPIO_ACTIVE_HIGH for regulators
  ARM: dts: imx6ul: add flexcan support
  ARM: dts: imx5: add gpu nodes
  ARM: dts: imx6qdl-sabresd: add accelerometer sensor support
  ARM: dts: imx6qdl-sabresd: add magnetometer sensor support
  ARM: dts: imx6qdl-sabresd: add light sensor support
  ARM: dts: imx6qdl-sabresd: Move regulators outside of "simple-bus"
  ARM: dts: imx6qdl: Fix memory node duplication
  ARM: dts: imx6dl-mamoj: Add a memory node
  ARM: dts: imx53-voipac-dmm-668: Fix memory node duplication
  ARM: dts: vf610-zii-scu4-aib: Add HI8435 support
  ARM: dts: imx6qdl-sabresd: add egalax touch screen support on i2c2 bus
  ARM: dts: imx7s: Add flexcan stop mode wakeup support
  ARM: dts: imx6ul: Add flexcan stop mode wakeup support
  ARM: dts: imx6qdl: Add flexcan stop mode wakeup support
  ARM: dts: imx6sx: Add flexcan stop mode wakeup support
  ARM: dts: imx6ul-pico: Add the imx6ul-pico-pi variant
  ARM: dts: imx6ul-pico-hobbit: Extend peripherals support
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v4.20-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt

mt8173: add node for the command queue device

* tag 'v4.20-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm64: dts: mt8173: Add GCE node
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt64-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Samsung DTS ARM64 changes for v4.21

1. Update DWC3 hardware modules to Exynos5433 specific variant.
2. Update cooling maps to include all CPU devices in multiple DTS files.

* tag 'samsung-dt64-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Add all CPUs in cooling maps
  arm64: dts: exynos: Update DWC3 modules on Exynos5433 SoCs
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Samsung DTS ARM changes for v4.21

1. Add missing properties and nodes for PMIC clocks in multiple DTS
   files.
2. Add UHS-I bus speed support to Odroid XU3/XU4/HC SD card and bump the
   maximum clock frequency to 200 MHz for SD and eMMC.
3. Update cooling maps to include all CPU devices in multiple DTS files.
4. Enable quirks for Exynos3250 DWC.
5. Add JPEG CODEC node to S5Pv210.
6. Add opp-suspend to devfreq OPPs on Exynos4 boards to fix resuming
   from suspend to RAM.
7. Remove eDP from Arndale board as it does not work and breaks also
   DSI.

* tag 'samsung-dt-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: remove display-port node from Arndale
  ARM: dts: exynos: Add opp-suspend to DMC and leftbus devfreq OPPs on Exynos4
  ARM: dts: s5pv210: Add s5p-jpeg codec node.
  ARM: dts: exynos: Use Samsung SoC specific compatible for DWC2 module
  ARM: dts: exynos: Add all CPUs in cooling maps
  ARM: dts: exynos: Clarify comment explaining purpose of Odroid XU3 DTSI
  ARM: dts: exynos: Add pin configuration for SD write protect on Odroid XU3/XU4/HC1
  ARM: dts: exynos: Update maximum frequency for eMMC to 200MHz on Odroid XU3/XU4
  ARM: dts: exynos: Update maximum frequency for SD card to 200MHz on Odroid XU3/XU4/HC1
  ARM: dts: exynos: Fix LDO13 min values on Odroid XU3/XU4/HC1
  ARM: dts: exynos: Add UHS-I bus speed support to Odroid XU3/XU4/HC1
  ARM: dts: exynos: Add missing clocks to RTC node for Arndale board
  ARM: dts: exynos: Add compatible for s5m8767 clocks node on Itop Core
  ARM: dts: exynos: Add compatible for s2mps11 clocks node on Exynos542x
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu dt64 for 4.21 (part 1)

 - complete the description of the clearfog-gt-8k board (Armada 8040
   based board)
 - declare eMMC on espressobin (Armada 3720 based board) which still
   need to be enable by the bootloader as it is not present on all the
   board.
 - add a new version of the Macchiatobin (Armada 8040 based board): the
   Single Shot (without the 10G 3310 PHYs).

* tag 'mvebu-dt64-4.21-1' of git://git.infradead.org/linux-mvebu:
  arm64: dts: clearfog-gt-8k: describe mini-PCIe CON2 USB
  arm64: dts: add support for Macchiatobin Single Shot board
  arm64: dts: marvell: armada-37xx: Enable emmc on espressobin
  arm64: dts: marvell: armada37xx: Add emmc/sdio pinctrl definition
  arm64: dts: clearfog-gt-8k: enable mini-PCIe CON2 USB
  arm64: dts: clearfog-gt-8k: 1G eth PHY reset signal
  arm64: dts: clearfog-gt-8k: fix USB regulator gpio polarity
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-arm64-for-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

Qualcomm ARM64 Updates for v4.21 Part 2

* Switch to use dwc3-qcom glue driver on MSM8996
* Fix issue with xo clk name on MSM8998
* Add cooling maps on MSM8916
* Add UART nodes on SDM845
* Add camera subsystem support on MSM8996 and MSM8916

* tag 'qcom-arm64-for-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: dts: msm8996: Use dwc3-qcom glue driver for USB
  arm64: dts: qcom: msm8998: Fixup clock to use xo_board
  arm64: dts: qcom: sdm845: Add UART nodes
  arm64: dts: qcom: msm8996: Add CAMSS support
  arm64: dts: qcom: msm8996: Add VFE SMMU node
  arm64: dts: qcom: Add pinctrls for camera sensors
  arm64: dts: qcom: Add Camera Control Interface pinctrls
  arm64: dts: qcom: msm8916: Add CAMSS support
  arm64: dts: qcom: msm8916: Add IOMMU sub-node for VFE context bank
  arm64: dts: msm8916: Add all CPUs in cooling maps
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Allwinner arm64 DT changes for 4.21

Our usual set of arm64 DT changes, with the biggest additions being:
  - Support for the video decoding engine in the A64
  - Support for the audio codec in the A64
  - USB Support in the H6
  - HDMI Support in the H6
  - EMAC Support in the H6
  - New board: Orange Pi Lite2

* tag 'sunxi-dt64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (27 commits)
  arm64: dts: allwinner: a64: Fix up RTC device node and clock references
  arm64: dts: allwinner: a64: Add Video Engine node
  arm64: dts: allwinner: a64: Add support for the SRAM C1 section
  arm64: dts: allwinner: a64: pinebook: enable power supplies
  arm64: dts: allwinner: a64: sopine-baseboard: enable power supplies
  arm64: dts: allwinner: axp803: add AC and battery power supplies
  arm64: dts: allwinner: a64: bananapi-m64: Enable audio codec
  arm64: dts: allwinner: a64: enable sound on Pinebook
  arm64: dts: allwinner: a64: enable sound on Pine64 and SoPine
  arm64: dts: allwinner: a64: add nodes necessary for analog sound support
  arm64: dts: allwinner: h6: orangepi: Add device nodes for LEDs
  arm64: dts: allwinner: h6: orangepi: Enable USB 2.0 host and OTG ports
  arm64: dts: allwinner: h6: orangepi: Add board-wide 5V regulator
  arm64: dts: allwinner: h6: fix EMAC compatible string sequence
  arm64: dts: allwinner: a64: Add device node for Mali-400 GPU
  dt-bindings: gpu: mali-utgard: Add compatible for A64 Mali
  arm64: dts: allwinner: h6: enable USB2 on Pine H64
  arm64: dts: allwinner: h6: add USB Vbus regulator for Pine H64
  arm64: dts: allwinner: h6: add USB2-related device nodes
  arm64: dts: allwinner: h6: Enable HDMI output on Pine H64 board
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Allwinner DT changes for 4.21

This is a quite big pull request this time, with a huge number of changes
(and patches) due to us fixing the vast majority of the DTC warnings our DT
had.

We also have a bunch of other good, more meaningful, changes:
  - Support for the new Allwinner T3 (rebranded R40) and f1c100s (armv5)
    SoCs
  - AXP803 PMIC AC Power supply support
  - Rework of the oscillators tree
  - Two new boards: the t3-cqa3t-bv3 and Lichee Pi Nano

Plus a few enhancements here and there.

* tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (84 commits)
  ARM: dts: sunxi: Fix PMU compatible strings
  ARM: dts: sun8i: r40: Add RTC device node
  ARM: dts: sunxi: h3/h5: Fix up RTC device node and clock references
  ARM: dts: sun8i: a23/a33: Fix up RTC device node
  ARM: dts: sun8i: r40: Add clock accuracy for external oscillators
  ARM: dts: sunxi: h3/h5: Add clock accuracy for external oscillators
  ARM: dts: sun8i: a33: Drop audio codec oversampling rate to 128 fs
  ARM: dts: sun8i: h3: Remove unnecessary reserved memory node
  ARM: dts: sun8i: a33: Remove unnecessary reserved memory node
  ARM: dts: suniv: Add device tree for Lichee Pi Nano
  ARM: dts: suniv: add initial DTSI file for F1C100s
  ARM: dts: axp81x: add AC power supply subnode
  ARM: dts: sun8i: v3s: Remove skeleton and memory to avoid warnings
  ARM: dts: sun8i: v3s: Provide default muxing for relevant controllers
  ARM: dts: sun8i: v3s: Change pinctrl nodes to avoid warning
  ARM: dts: sun8i: v3s: Change LRADC node names to avoid warnings
  ARM: dts: sun8i: h3: Remove leading zeros from unit-addresses
  ARM: dts: sun8i: BPI-M2M: Remove i2c nodes
  ARM: dts: sun8i: a23/a33: Provide default muxing for relevant controllers
  ARM: dts: sunxi: reference: Move the muxing back to the common DTSI
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Add support for the internal timer peripheral on RV1108.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Merge tag 'tegra-for-4.21-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

arm64: tegra: Device tree change for v4.21-rc1

These changes add a bunch of features for Tegra194 and Tegra186, such as
wake events, on-die RTC, temperature sensors, HDA for audio over HDMI
and fan support on Jetson Xavier to allow cooling of the device.

* tag 'tegra-for-4.21-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (29 commits)
  arm64: tegra: Set reg property for display-hub on Tegra194
  arm64: tegra: Set reg property for display-hub on Tegra186
  arm64: dts: tegra186: Enable IOMMU for SDHCI
  arm64: tegra: Enable HDA controller on Jetson TX1
  arm64: tegra: Add CEC controller on Tegra194
  arm64: tegra: Enable HDA on Jetson Xavier
  arm64: tegra: Add HDA controller on Tegra194
  arm64: tegra: Add CEC controller on Tegra186
  arm64: tegra: Enable HDA on Jetson TX2
  arm64: tegra: Add HDA controller on Tegra186
  arm64: tegra: Add temperature sensor on P2888
  arm64: tegra: Add gpio-keys on Jetson Xavier
  arm64: tegra: Add AON GPIO controller on Tegra194
  arm64: tegra: p2888: Enable on-die RTC
  arm64: tegra: Add RTC support on Tegra194
  arm64: tegra: Enable PMC wake events on Tegra194
  arm64: tegra: p3310: Enable on-die RTC
  arm64: tegra: Add RTC support on Tegra186
  arm64: tegra: Enable PMC wake events on Tegra186
  arm64: tegra: Fix power key interrupt type on Jetson TX2
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-4.21-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

ARM: tegra: Device tree changes for v4.21-rc1

These changes add the external memory controller on Tegra20 as well as
the VIC on Tegra124.

* tag 'tegra-for-4.21-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Add VIC on Tegra124
  ARM: dts: tegra20: Add clock entry to External Memory Controller
  ARM: dts: tegra20: Add interrupt entry to External Memory Controller
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

dt-bindings: Changes for v4.21-rc1

This contains a few cleanups of and additions to existing device tree
bindings, such as XUSB, EMC, PMC and thermal.

* tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: tegra186-pmc: Add interrupt controller properties
  dt-bindings: thermal: tegra-bpmp: Add Tegra194 support
  dt: bindings: Move tegra20-emc binding to memory-controllers directory
  dt: bindings: tegra20-emc: Document clock property
  dt: bindings: tegra20-emc: Document interrupt property
  dt-bindings: usb: xhci-tegra: Add power-domain details
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-dt-bindings-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM Based SoC DT Bindings Updates for v4.21

* Move 'renesas,prr' binding to its own document
  - Prepration for converting board-level bindings to json-schema

* Document iW-RainboW-G20D-Qseven-RZG1N board and iWave RZ/G1N SOM

* tag 'renesas-dt-bindings-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  dt-bindings: arm: renesas: Move 'renesas,prr' binding to its own doc
  dt-bindings: arm: renesas: Document iW-RainboW-G20D-Qseven-RZG1N board
  dt-bindings: arm: renesas: Document iWave RZ/G1N SOM
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM Based SoC DT Updates for v4.21

* RZ/G1N (r8a7744) SoC
  - Describe in DT: SYS-DMAC, GPIO, Ethernet AVB, SMP, [H]SCIF{A|B},
    I2C, USB 2.0 and 3.0 hosts, USB-DMAC, HSUSB, RWDT, Audio, CAN, IRQC,
    thermal, CMT, VIN, VSP, IPMMU, PMU, TPU, QSPI MSIOF, and PCIE
  - iWave G20D-Q7 board
    - Initial support
    - Enable eMMC, SDHI and SPIO NOR support
  - Add camera daughterboard

* RZ/G1M (r8a7743) SoC
  - Remove legacy "renesas,rcar-thermal" compatibility

* tag 'renesas-arm-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (34 commits)
  ARM: dts: r8a7744-iwg20m: Add SPI NOR support
  ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM
  ARM: dts: r8a7744: Add PCIe Controller device node
  ARM: dts: r8a7744: Add xhci support
  ARM: dts: r8a7744: Add MSIOF[012] support
  ARM: dts: r8a7744: Add QSPI support
  ARM: dts: r8a7744-iwg20d-q7-dbcm-ca: Add device tree for camera DB
  ARM: dts: r8a7744: Add TPU support
  ARM: dts: r8a7744: Add PWM SoC support
  ARM: dts: r8a7744: Add IPMMU DT nodes
  ARM: dts: r8a7744: Add VSP support
  ARM: dts: r8a7744: add VIN dt support
  ARM: dts: r8a7744: Add CMT SoC specific support
  ARM: dts: r8a7744: Add thermal device to DT
  ARM: dts: r8a7744: Add IRQC support
  ARM: dts: r8a7744: Add CAN support
  ARM: dts: r8a7744: Add audio support
  ARM: dts: r8a7744: Add RWDT node
  ARM: dts: r8a7744: Add USB-DMAC and HSUSB device nodes
  ARM: dts: r8a7744: USB 2.0 host support
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm64-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM64 Based SoC DT Updates for v4.21

* R-Car D3 (r8a77995) SoC based Draak board
  - Add the backlight device for the LVDS1 output

* R-Car H3 (r8a7795) ES1.0 SoC
  - Add missing power domains to IPMMU nodes

* R-Car M3-N (r8a77965) SoC
  - Remove non-existent IPMMU-IR

* tag 'renesas-arm64-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: renesas: r8a77995: draak: Add backlight
  arm64: dts: renesas: r8a7795-es1: Add missing power domains to IPMMU nodes
  arm64: dts: renesas: r8a77965: Remove non-existent IPMMU-IR
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'aspeed-4.21-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt

ASPEED device tree updates for 4.20

 - New machine: Facebook Backpack-CMM BMC and flash layout

 - OpenPower reference systems (Palmetto P8, Romulus P9) move to the
   ColdFire based FSI driver

 - Misc device tree updates from the OpenBMC project

* tag 'aspeed-4.21-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed: Add Facebook Backpack-CMM BMC
  ARM: dts: Add Facebook BMC flash layout
  ARM: dts: aspeed: wspoon: Enable iio-hwmon battery
  ARM: dts: aspeed: romulus: Enable iio-hwmon-battery
  ARM: dts: aspeed: Enable VHUB on Romulus
  ARM: dts: aspeed-palmetto: Add LPC control node
  ARM: dts: aspeed: Palmetto system can use coprocessor for FSI
  ARM: dts: aspeed: Romulus system can use coprocessor for FSI
Signed-off-by: Olof Johansson <olof@lixom.net>

This device-tree pxa update brings :
 - various fixes from Daniel (W=12 issues mainly)
 - support for the first pxa3xx devicetree pxa board

* tag 'pxa-dt-4.21' of https://github.com/rjarzmik/linux:
  ARM: dts: pxa3xx: Add Raumfeld DTS files
  ARM: dts: pxa: clean up USB controller nodes
  ARM: dts: pxa3xx: clean up pxa3xx clock controller node name
  ARM: dts: pxa3xx: order timer and gcu nodes under /pxabus
  ARM: dts: pxa2xx: fix hwuart memory range
  ARM: dts: pxa3xx: drop #address-cells and #size-cells from pinctrl node
  ARM: dts: pxa2xx: drop #address-cells and #size-cells from /cpus
  ARM: dts: pxa3xx: add gcu node
Signed-off-by: Olof Johansson <olof@lixom.net>

Add MIO-DMAC (Media IO DMA Controller) nodes, and use them as
the DMA engine of SD/eMMC controllers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Each CPU can (and does) participate in cooling down the system but the
DT only captures a handful of them, normally CPU0, in the cooling maps.
Things work by chance currently as under normal circumstances its the
first CPU of each cluster which is used by the operating systems to
probe the cooling devices. But as soon as this CPU ordering changes and
any other CPU is used to bring up the cooling device, we will start
seeing failures.

Also the DT is rather incomplete when we list only one CPU in the
cooling maps, as the hardware doesn't have any such limitations.

Update cooling maps to include all devices affected by individual trip
points.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The NXP i.MX 7ULP Evaluation Kit (EVK) provides a platform for rapid
evaluation of the i.MX 7ULP, which features NXP's advanced implementation
of the Arm Cortex-A7 core, the Arm Cortex-M4 core, as well as a 3D and
2D Graphics Processing Units (GPUs).

The EVK enables HDMI output for simple out-of-the-box to bring up but
allows reconfiguration for MIPI displays. The EVK is designed as a
System-On-Module(SOM) board that connects to an associated baseboard.
The SOM provides 1 GB LPDDR3, 8 MB Quad SPI flash, Micro SD 3.0 card
socket, WiFi/ Bluetooth capability, USB 2.0 OTG with Type C connector
and an NXP PF1550 power management IC (PMIC). The baseboard provides
additional capabilities including a full SD/MMC 3.0 card socket, audio
codec, multiple sensors, an HDMI connector, and an alternate MIPI display
connector. Additionally, the EVK facilitates software development with the
ultimate goal of faster time to market through the support of both
Linux OS and AndroidTM rich operating systems, as well as FreeRTOS.

This patch aims to support the preliminary booting up features
as follows:
GPIO
LPUART
FEC
SD/MMC

See more board details:
https://www.nxp.com/products/processors-and-microcontrollers/
arm-based-processors-and-mcus/i.mx-applications-processors/
i.mx-7-processors/evaluation-kit-for-the-i.mx-7ulp-applications
-processor:MCIMX7ULP-EVK

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The i.MX 7ULP family of processors features NXP's advanced implementation
of the Arm Cortex-A7 core, the Arm Cortex-M4 core, as well as a 3D and 2D
Graphics Processing Units (GPUs).

This patch aims to add the initial support including:
1) CLK
2) GPIO PTC, PTD, PTE, PTF
3) uSDHC 1/2
4) LPUART 4/5/6/7
5) LPI2C 6/7

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add imx7ulp pm related components bindings.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add compatible string for imx7ulp evk board.

Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The imx7d-pico-hobbit contains a imx7d-pico SoM and a hobbit baseboard.

Add support for it.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

This adds following peripherals for the imx7d-pico-pi as:

 - LED
 - Touchscreen
 - GPIO
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

This extends the peripherals supported by the imx7d-pico.dtsi. It
adds:

 - I2C2
 - Flexcan (flexcan1 and flexcan2 ports)
 - USDHC1
 - UART (6 and 7 ports)
 - PWM (4 ports)
 - eCSPI3
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

There are different models of WiFi being used in the SoM and the
handle name was too restrictive. This reworks it to a more generic and
meaningful name.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Pass the "phy-reset-gpios" property in order to describe the GPIO
that performs the Ethernet PHY reset.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Pass the USBOTG1_PWR pinctrl description in the USBOTG GPIO
controlled regulator.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

imx7d-pico-pi board contains:

- One SoM board (imx7d pico)
- One base board (pi).

In order to make it easier for adding support for other board variants,
move the commom SoM part to the imx7d-pico.dtsi file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Currently the memory size described in dts is 2GB, which is incorrect.

There are 512MB and 1GB versions of imx7d-pico boards, so remove
the hardcoded memory size and let the bootloader pass the correct
value to the kernel.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

i.MX fixes for 4.20, round 3:
 - A couple of fixes on imx7d-pico and imx7d-nitrogen7 boards to correct
   the description of the Wifi clock.
 - Change SW2ISO count to get a safer ARM LDO ramp-up time, so that
   different boards can be covered. This fixes the ARM LDO failure seen
   on some customer boards.