- 07 Oct, 2019 16 commits
-
-
Arnd Bergmann authored
[ Upstream commit 920fdab7 ] On arm64 build with clang, sometimes the __cmpxchg_mb is not inlined when CONFIG_OPTIMIZE_INLINING is set. Clang then fails a compile-time assertion, because it cannot tell at compile time what the size of the argument is: mm/memcontrol.o: In function `__cmpxchg_mb': memcontrol.c:(.text+0x1a4c): undefined reference to `__compiletime_assert_175' memcontrol.c:(.text+0x1a4c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `__compiletime_assert_175' Mark all of the cmpxchg() style functions as __always_inline to ensure that the compiler can see the result. Acked-by:
Nick Desaulniers <ndesaulniers@google.com> Reported-by:
Nathan Chancellor <natechancellor@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/648Reviewed-by:
Andrew Murray <andrew.murray@arm.com> Tested-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nathan Lynch authored
[ Upstream commit 92c94dfb ] prep_irq_for_idle() is intended to be called before entering H_CEDE (and it is used by the pseries cpuidle driver). However the default pseries idle routine does not call it, leading to mismanaged lazy irq state when the cpuidle driver isn't in use. Manifestations of this include: * Dropped IPIs in the time immediately after a cpu comes online (before it has installed the cpuidle handler), making the online operation block indefinitely waiting for the new cpu to respond. * Hitting this WARN_ON in arch_local_irq_restore(): /* * We should already be hard disabled here. We had bugs * where that wasn't the case so let's dbl check it and * warn if we are wrong. Only do that when IRQ tracing * is enabled as mfmsr() can be costly. */ if (WARN_ON_ONCE(mfmsr() & MSR_EE)) __hard_irq_disable(); Call prep_irq_for_idle() from pseries_lpar_idle() and honor its result. Fixes: 363edbe2 ("powerpc: Default arch idle could cede processor on pseries") Signed-off-by:
Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190910225244.25056-1-nathanl@linux.ibm.comSigned-off-by:
-
Nicholas Piggin authored
[ Upstream commit 0b66370c ] Bare metal machine checks run an "early" handler in real mode before running the main handler which reports the event. The main handler runs exactly as a normal interrupt handler, after the "windup" which sets registers back as they were at interrupt entry. CFAR does not get restored by the windup code, so that will be wrong when the handler is run. Restore the CFAR to the saved value before running the late handler. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Jean Delvare authored
[ Upstream commit 77efe48a ] Comparing adev->family with CHIP constants is not correct. adev->family can only be compared with AMDGPU_FAMILY constants and adev->asic_type is the struct member to compare with CHIP constants. They are separate identification spaces. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Fixes: 62a37553 ("drm/amdgpu: add si implementation v10") Cc: Ken Wang <Qingqing.Wang@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
hexin authored
[ Upstream commit 92c80268 ] vfio_pci_enable() saves the device's initial configuration information with the intent that it is restored in vfio_pci_disable(). However, the commit referenced in Fixes: below replaced the call to __pci_reset_function_locked(), which is not wrapped in a state save and restore, with pci_try_reset_function(), which overwrites the restored device state with the current state before applying it to the device. Reinstate use of __pci_reset_function_locked() to return to the desired behavior. Fixes: 890ed578 ("vfio-pci: Use pci "try" reset interface") Signed-off-by:
hexin <hexin15@baidu.com> Signed-off-by:
Liu Qi <liuqi16@baidu.com> Signed-off-by:
Zhang Yu <zhangyu31@baidu.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Sowjanya Komatineni authored
[ Upstream commit c2cf351e ] pmx_writel uses writel which inserts write barrier before the register write. This patch has fix to replace writel with writel_relaxed followed by a readback and memory barrier to ensure write operation is completed for successful pinctrl change. Acked-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Sowjanya Komatineni <skomatineni@nvidia.com> Link: https://lore.kernel.org/r/1565984527-5272-2-git-send-email-skomatineni@nvidia.comSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Nathan Lynch authored
[ Upstream commit ccfb5bd7 ] After a partition migration, pseries_devicetree_update() processes changes to the device tree communicated from the platform to Linux. This is a relatively heavyweight operation, with multiple device tree searches, memory allocations, and conversations with partition firmware. There's a few levels of nested loops which are bounded only by decisions made by the platform, outside of Linux's control, and indeed we have seen RCU stalls on large systems while executing this call graph. Use cond_resched() in these loops so that the cpu is yielded when needed. Signed-off-by:
-
Christophe Leroy authored
[ Upstream commit 38a0d0cd ] We see warnings such as: kernel/futex.c: In function 'do_futex': kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized] return oldval == cmparg; ^ kernel/futex.c:1651:6: note: 'oldval' was declared here int oldval, ret; ^ This is because arch_futex_atomic_op_inuser() only sets *oval if ret is 0 and GCC doesn't see that it will only use it when ret is 0. Anyway, the non-zero ret path is an error path that won't suffer from setting *oval, and as *oval is a local var in futex_atomic_op_inuser() it will have no impact. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> [mpe: reword change log slightly] Signed-off-by:
-
Nathan Lynch authored
[ Upstream commit a6717c01 ] The LPAR migration implementation and userspace-initiated cpu hotplug can interleave their executions like so: 1. Set cpu 7 offline via sysfs. 2. Begin a partition migration, whose implementation requires the OS to ensure all present cpus are online; cpu 7 is onlined: rtas_ibm_suspend_me -> rtas_online_cpus_mask -> cpu_up This sets cpu 7 online in all respects except for the cpu's corresponding struct device; dev->offline remains true. 3. Set cpu 7 online via sysfs. _cpu_up() determines that cpu 7 is already online and returns success. The driver core (device_online) sets dev->offline = false. 4. The migration completes and restores cpu 7 to offline state: rtas_ibm_suspend_me -> rtas_offline_cpus_mask -> cpu_down This leaves cpu7 in a state where the driver core considers the cpu device online, but in all other respects it is offline and unused. Attempts to online the cpu via sysfs appear to succeed but the driver core actually does not pass the request to the lower-level cpuhp support code. This makes the cpu unusable until the cpu device is manually set offline and then online again via sysfs. Instead of directly calling cpu_up/cpu_down, the migration code should use the higher-level device core APIs to maintain consistent state and serialize operations. Fixes: 120496ac ("powerpc: Bring all threads online prior to migration/hibernation") Signed-off-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Stephen Boyd authored
[ Upstream commit af55dadf ] A future patch is going to change semantics of clk_register() so that clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid referencing this member here so that we don't run into NULL pointer exceptions. Cc: Guo Zeng <Guo.Zeng@csr.com> Cc: Barry Song <Baohua.Song@csr.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190731193517.237136-6-sboyd@kernel.orgSigned-off-by:
-
Nathan Huckleberry authored
[ Upstream commit a95fb581 ] drivers/clk/clk-qoriq.c:138:38: warning: unused variable 'p5020_cmux_grp1' [-Wunused-const-variable] static const struct clockgen_muxinfo p5020_cmux_grp1 drivers/clk/clk-qoriq.c:146:38: warning: unused variable 'p5020_cmux_grp2' [-Wunused-const-variable] static const struct clockgen_muxinfo p5020_cmux_grp2 In the definition of the p5020 chip, the p2041 chip's info was used instead. The p5020 and p2041 chips have different info. This is most likely a typo. Link: https://github.com/ClangBuiltLinux/linux/issues/525 Cc: clang-built-linux@googlegroups.com Signed-off-by:
Nathan Huckleberry <nhuck@google.com> Link: https://lkml.kernel.org/r/20190627220642.78575-1-nhuck@google.comReviewed-by:
Scott Wood <oss@buserror.net> Signed-off-by:
-
Corey Minyard authored
[ Upstream commit 340ff31a ] ipmi_thread() uses back-to-back schedule() to poll for command completion which, on some machines, can push up CPU consumption and heavily tax the scheduler locks leading to noticeable overall performance degradation. This was originally added so firmware updates through IPMI would complete in a timely manner. But we can't kill the scheduler locks for that one use case. Instead, only run schedule() continuously in maintenance mode, where firmware updates should run. Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit f3eb9b8f ] In radeon_connector_set_property(), there is an if statement on line 743 to check whether connector->encoder is NULL: if (connector->encoder) When connector->encoder is NULL, it is used on line 755: if (connector->encoder->crtc) Thus, a possible null-pointer dereference may occur. To fix this bug, connector->encoder is checked before being used. This bug is found by a static analysis tool STCheck written by us. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
KyleMahlkuch authored
[ Upstream commit 6f7fe9a9 ] During kexec some adapters hit an EEH since they are not properly shut down in the radeon_pci_shutdown() function. Adding radeon_suspend_kms() fixes this issue. Signed-off-by:
KyleMahlkuch <kmahlkuc@linux.vnet.ibm.com> Signed-off-by:
-
Marko Kohtala authored
[ Upstream commit dd978283 ] The page_offset was only applied to the end of the page range. This caused the display updates to cause a scrolling effect on the display because the amount of data written to the display did not match the range display expected. Fixes: 301bc067 ("video: ssd1307fb: Make use of horizontal addressing mode") Signed-off-by:
Marko Kohtala <marko.kohtala@okoko.fi> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-4-marko.kohtala@okoko.fiSigned-off-by:
-
Andrey Smirnov authored
[ Upstream commit e0655fea ] According to the datasheet tc358767 can transfer up to 16 bytes via its AUX channel, so the artificial limit of 8 appears to be too low. However only up to 15-bytes seem to be actually supported and trying to use 16-byte transfers results in transfers failing sporadically (with bogus status in case of I2C transfers), so limit it to 15. Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Cory Tusar <cory.tusar@zii.aero> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
- 05 Oct, 2019 24 commits
-
-
Greg Kroah-Hartman authored
-
Filipe Manana authored
[ Upstream commit 13fc1d27 ] There is a race between setting up a qgroup rescan worker and completing a qgroup rescan worker that can lead to callers of the qgroup rescan wait ioctl to either not wait for the rescan worker to complete or to hang forever due to missing wake ups. The following diagram shows a sequence of steps that illustrates the race. CPU 1 CPU 2 CPU 3 btrfs_ioctl_quota_rescan() btrfs_qgroup_rescan() qgroup_rescan_init() mutex_lock(&fs_info->qgroup_rescan_lock) spin_lock(&fs_info->qgroup_lock) fs_info->qgroup_flags |= BTRFS_QGROUP_STATUS_FLAG_RESCAN init_completion( &fs_info->qgroup_rescan_completion) fs_info->qgroup_rescan_running = true mutex_unlock(&fs_info->qgroup_rescan_lock) spin_unlock(&fs_info->qgroup_lock) btrfs_init_work() --> starts the worker btrfs_qgroup_rescan_worker() mutex_lock(&fs_info->qgroup_rescan_lock) fs_info->qgroup_flags &= ~BTRFS_QGROUP_STATUS_FLAG_RESCAN mutex_unlock(&fs_info->qgroup_rescan_lock) starts transaction, updates qgroup status item, etc btrfs_ioctl_quota_rescan() btrfs_qgroup_rescan() qgroup_rescan_init() mutex_lock(&fs_info->qgroup_rescan_lock) spin_lock(&fs_info->qgroup_lock) fs_info->qgroup_flags |= BTRFS_QGROUP_STATUS_FLAG_RESCAN init_completion( &fs_info->qgroup_rescan_completion) fs_info->qgroup_rescan_running = true mutex_unlock(&fs_info->qgroup_rescan_lock) spin_unlock(&fs_info->qgroup_lock) btrfs_init_work() --> starts another worker mutex_lock(&fs_info->qgroup_rescan_lock) fs_info->qgroup_rescan_running = false mutex_unlock(&fs_info->qgroup_rescan_lock) complete_all(&fs_info->qgroup_rescan_completion) Before the rescan worker started by the task at CPU 3 completes, if another task calls btrfs_ioctl_quota_rescan(), it will get -EINPROGRESS because the flag BTRFS_QGROUP_STATUS_FLAG_RESCAN is set at fs_info->qgroup_flags, which is expected and correct behaviour. However if other task calls btrfs_ioctl_quota_rescan_wait() before the rescan worker started by the task at CPU 3 completes, it will return immediately without waiting for the new rescan worker to complete, because fs_info->qgroup_rescan_running is set to false by CPU 2. This race is making test case btrfs/171 (from fstests) to fail often: btrfs/171 9s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/171.out.bad) # --- tests/btrfs/171.out 2018-09-16 21:30:48.505104287 +0100 # +++ /home/fdmanana/git/hub/xfstests/results//btrfs/171.out.bad 2019-09-19 02:01:36.938486039 +0100 # @@ -1,2 +1,3 @@ # QA output created by 171 # +ERROR: quota rescan failed: Operation now in progress # Silence is golden # ... # (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/btrfs/171.out /home/fdmanana/git/hub/xfstests/results//btrfs/171.out.bad' to see the entire diff) That is because the test calls the btrfs-progs commands "qgroup quota rescan -w", "qgroup assign" and "qgroup remove" in a sequence that makes calls to the rescan start ioctl fail with -EINPROGRESS (note the "btrfs" commands 'qgroup assign' and 'qgroup remove' often call the rescan start ioctl after calling the qgroup assign ioctl, btrfs_ioctl_qgroup_assign()), since previous waits didn't actually wait for a rescan worker to complete. Another problem the race can cause is missing wake ups for waiters, since the call to complete_all() happens outside a critical section and after clearing the flag BTRFS_QGROUP_STATUS_FLAG_RESCAN. In the sequence diagram above, if we have a waiter for the first rescan task (executed by CPU 2), then fs_info->qgroup_rescan_completion.wait is not empty, and if after the rescan worker clears BTRFS_QGROUP_STATUS_FLAG_RESCAN and before it calls complete_all() against fs_info->qgroup_rescan_completion, the task at CPU 3 calls init_completion() against fs_info->qgroup_rescan_completion which re-initilizes its wait queue to an empty queue, therefore causing the rescan worker at CPU 2 to call complete_all() against an empty queue, never waking up the task waiting for that rescan worker. Fix this by clearing BTRFS_QGROUP_STATUS_FLAG_RESCAN and setting fs_info->qgroup_rescan_running to false in the same critical section, delimited by the mutex fs_info->qgroup_rescan_lock, as well as doing the call to complete_all() in that same critical section. This gives the protection needed to avoid rescan wait ioctl callers not waiting for a running rescan worker and the lost wake ups problem, since setting that rescan flag and boolean as well as initializing the wait queue is done already in a critical section delimited by that mutex (at qgroup_rescan_init()). Fixes: 57254b6e ("Btrfs: add ioctl to wait for qgroup rescan completion") Fixes: d2c609b8 ("btrfs: properly track when rescan worker is running") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Lu Fengqi authored
[ Upstream commit 2e980acd ] They can be fetched from the transaction handle. Signed-off-by:
Lu Fengqi <lufq.fnst@cn.fujitsu.com> Signed-off-by:
-
Pavel Shilovsky authored
commit a016e279 upstream. There may be situations when a server negotiates SMB 2.1 protocol version or higher but responds to a CREATE request with an oplock rather than a lease. Currently the client doesn't handle such a case correctly: when another CREATE comes in the server sends an oplock break to the initial CREATE and the client doesn't send an ack back due to a wrong caching level being set (READ instead of RWH). Missing an oplock break ack makes the server wait until the break times out which dramatically increases the latency of the second CREATE. Fix this by properly detecting oplocks when using SMB 2.1 protocol version and higher. Cc: <stable@vger.kernel.org> Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Murphy Zhou authored
commit 63d37fb4 upstream. It should not be larger then the slab max buf size. If user specifies a larger size, it passes this check and goes straightly to SMB2_set_info_init performing an insecure memcpy. Signed-off-by:
Murphy Zhou <jencce.kernel@gmail.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Chris Brandt authored
commit a71e2ac1 upstream. The NACKF flag should be cleared in INTRIICNAKI interrupt processing as description in HW manual. This issue shows up quickly when PREEMPT_RT is applied and a device is probed that is not plugged in (like a touchscreen controller). The result is endless interrupts that halt system boot. Fixes: 310c18a4 ("i2c: riic: add driver") Cc: stable@vger.kernel.org Reported-by:
Chien Nguyen <chien.nguyen.eb@rvc.renesas.com> Signed-off-by:
Chris Brandt <chris.brandt@renesas.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Laurent Vivier authored
commit 78887832 upstream. add_early_randomness() is called by hwrng_register() when the hardware is added. If this hardware and its module are present at boot, and if there is no data available the boot hangs until data are available and can't be interrupted. For instance, in the case of virtio-rng, in some cases the host can be not able to provide enough entropy for all the guests. We can have two easy ways to reproduce the problem but they rely on misconfiguration of the hypervisor or the egd daemon: - if virtio-rng device is configured to connect to the egd daemon of the host but when the virtio-rng driver asks for data the daemon is not connected, - if virtio-rng device is configured to connect to the egd daemon of the host but the egd daemon doesn't provide data. The guest kernel will hang at boot until the virtio-rng driver provides enough data. To avoid that, call rng_get_data() in non-blocking mode (wait=0) from add_early_randomness(). Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Fixes: d9e79726 ("hwrng: add randomness to system from rng...") Cc: <stable@vger.kernel.org> Reviewed-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Chao Yu authored
commit 6565c182 upstream. Quoted from commit 3da40c7b ("ext4: only call ext4_truncate when size <= isize") " At LSF we decided that if we truncate up from isize we shouldn't trim fallocated blocks that were fallocated with KEEP_SIZE and are past the new i_size. This patch fixes ext4 to do this. " And generic/092 of fstest have covered this case for long time, however is_quota_modification() didn't adjust based on that rule, so that in below condition, we will lose to quota block change: - fallocate blocks beyond EOF - remount - truncate(file_path, file_size) Fix it. Link: https://lore.kernel.org/r/20190911093650.35329-1-yuchao0@huawei.com Fixes: 3da40c7b ("ext4: only call ext4_truncate when size <= isize") CC: stable@vger.kernel.org Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Theodore Ts'o authored
commit c1e8220b upstream. If a program attempts to punch a hole on an inline data file, we need to convert it to a normal file first. This was detected using ext4/032 using the adv configuration. Simple reproducer: mke2fs -Fq -t ext4 -O inline_data /dev/vdc mount /vdc echo "" > /vdc/testfile xfs_io -c 'truncate 33554432' /vdc/testfile xfs_io -c 'fpunch 0 1048576' /vdc/testfile umount /vdc e2fsck -fy /dev/vdc Cc: stable@vger.kernel.org Signed-off-by:
-
Rakesh Pandit authored
commit e3d550c2 upstream. Really enable warning when CONFIG_EXT4_DEBUG is set and fix missing first argument. This was introduced in commit ff95ec22 ("ext4: add warning to ext4_convert_unwritten_extents_endio") and splitting extents inside endio would trigger it. Fixes: ff95ec22 ("ext4: add warning to ext4_convert_unwritten_extents_endio") Signed-off-by:
Rakesh Pandit <rakesh@tuxera.com> Signed-off-by:
-
Tetsuo Handa authored
commit 8619e5bd upstream. syzbot found that a thread can stall for minutes inside read_mem() or write_mem() after that thread was killed by SIGKILL [1]. Reading from iomem areas of /dev/mem can be slow, depending on the hardware. While reading 2GB at one read() is legal, delaying termination of killed thread for minutes is bad. Thus, allow reading/writing /dev/mem and /dev/kmem to be preemptible and killable. [ 1335.912419][T20577] read_mem: sz=4096 count=2134565632 [ 1335.943194][T20577] read_mem: sz=4096 count=2134561536 [ 1335.978280][T20577] read_mem: sz=4096 count=2134557440 [ 1336.011147][T20577] read_mem: sz=4096 count=2134553344 [ 1336.041897][T20577] read_mem: sz=4096 count=2134549248 Theoretically, reading/writing /dev/mem and /dev/kmem can become "interruptible". But this patch chose "killable". Future patch will make them "interruptible" so that we can revert to "killable" if some program regressed. [1] https://syzkaller.appspot.com/bug?id=a0e3436829698d5824231251fad9d8e998f94f5eSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@vger.kernel.org> Reported-by:
syzbot <syzbot+8ab2d0f39fb79fe6ca40@syzkaller.appspotmail.com> Link: https://lore.kernel.org/r/1566825205-10703-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by:
-
Denis Kenzior authored
commit c1d3ad84 upstream. Currently frame registrations are not purged, even when changing the interface type. This can lead to potentially weird situations where frames possibly not allowed on a given interface type remain registered due to the type switching happening after registration. The kernel currently relies on userspace apps to actually purge the registrations themselves, this is not something that the kernel should rely on. Add a call to cfg80211_mlme_purge_registrations() to forcefully remove any registrations left over prior to switching the iftype. Cc: stable@vger.kernel.org Signed-off-by:
Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190828211110.15005-1-denkenz@gmail.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Xiao Ni authored
commit 143f6e73 upstream. 7471fb77 ("md/raid6: Fix anomily when recovering a single device in RAID6.") avoids rereading P when it can be computed from other members. However, this misses the chance to re-write the right data to P. This patch sets R5_ReadError if the re-read fails. Also, when re-read is skipped, we also missed the chance to reset rdev->read_errors to 0. It can fail the disk when there are many read errors on P member disk (other disks don't have read error) V2: upper layer read request don't read parity/Q data. So there is no need to consider such situation. This is Reported-by: kbuild test robot <lkp@intel.com> Fixes: 7471fb77 ("md/raid6: Fix anomily when recovering a single device in RAID6.") Cc: <stable@vger.kernel.org> #4.4+ Signed-off-by:
Xiao Ni <xni@redhat.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Nikolay Borisov authored
commit 6af112b1 upstream. When doing any form of incremental send the parent and the child trees need to be compared via btrfs_compare_trees. This can result in long loop chains without ever relinquishing the CPU. This causes softlockup detector to trigger when comparing trees with a lot of items. Example report: watchdog: BUG: soft lockup - CPU#0 stuck for 24s! [snapperd:16153] CPU: 0 PID: 16153 Comm: snapperd Not tainted 5.2.9-1-default #1 openSUSE Tumbleweed (unreleased) Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40000005 (nZcv daif -PAN -UAO) pc : __ll_sc_arch_atomic_sub_return+0x14/0x20 lr : btrfs_release_extent_buffer_pages+0xe0/0x1e8 [btrfs] sp : ffff00001273b7e0 Call trace: __ll_sc_arch_atomic_sub_return+0x14/0x20 release_extent_buffer+0xdc/0x120 [btrfs] free_extent_buffer.part.0+0xb0/0x118 [btrfs] free_extent_buffer+0x24/0x30 [btrfs] btrfs_release_path+0x4c/0xa0 [btrfs] btrfs_free_path.part.0+0x20/0x40 [btrfs] btrfs_free_path+0x24/0x30 [btrfs] get_inode_info+0xa8/0xf8 [btrfs] finish_inode_if_needed+0xe0/0x6d8 [btrfs] changed_cb+0x9c/0x410 [btrfs] btrfs_compare_trees+0x284/0x648 [btrfs] send_subvol+0x33c/0x520 [btrfs] btrfs_ioctl_send+0x8a0/0xaf0 [btrfs] btrfs_ioctl+0x199c/0x2288 [btrfs] do_vfs_ioctl+0x4b0/0x820 ksys_ioctl+0x84/0xb8 __arm64_sys_ioctl+0x28/0x38 el0_svc_common.constprop.0+0x7c/0x188 el0_svc_handler+0x34/0x90 el0_svc+0x8/0xc Fix this by adding a call to cond_resched at the beginning of the main loop in btrfs_compare_trees. Fixes: 7069830a ("Btrfs: add btrfs_compare_trees function") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
-
Filipe Manana authored
commit efad8a85 upstream. At ctree.c:get_old_root(), we are accessing a root's header owner field after we have freed the respective extent buffer. This results in an use-after-free that can lead to crashes, and when CONFIG_DEBUG_PAGEALLOC is set, results in a stack trace like the following: [ 3876.799331] stack segment: 0000 [#1] SMP DEBUG_PAGEALLOC PTI [ 3876.799363] CPU: 0 PID: 15436 Comm: pool Not tainted 5.3.0-rc3-btrfs-next-54 #1 [ 3876.799385] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 [ 3876.799433] RIP: 0010:btrfs_search_old_slot+0x652/0xd80 [btrfs] (...) [ 3876.799502] RSP: 0018:ffff9f08c1a2f9f0 EFLAGS: 00010286 [ 3876.799518] RAX: ffff8dd300000000 RBX: ffff8dd85a7a9348 RCX: 000000038da26000 [ 3876.799538] RDX: 0000000000000000 RSI: ffffe522ce368980 RDI: 0000000000000246 [ 3876.799559] RBP: dae1922adadad000 R08: 0000000008020000 R09: ffffe522c0000000 [ 3876.799579] R10: ffff8dd57fd788c8 R11: 000000007511b030 R12: ffff8dd781ddc000 [ 3876.799599] R13: ffff8dd9e6240578 R14: ffff8dd6896f7a88 R15: ffff8dd688cf90b8 [ 3876.799620] FS: 00007f23ddd97700(0000) GS:ffff8dda20200000(0000) knlGS:0000000000000000 [ 3876.799643] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3876.799660] CR2: 00007f23d4024000 CR3: 0000000710bb0005 CR4: 00000000003606f0 [ 3876.799682] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3876.799703] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3876.799723] Call Trace: [ 3876.799735] ? do_raw_spin_unlock+0x49/0xc0 [ 3876.799749] ? _raw_spin_unlock+0x24/0x30 [ 3876.799779] resolve_indirect_refs+0x1eb/0xc80 [btrfs] [ 3876.799810] find_parent_nodes+0x38d/0x1180 [btrfs] [ 3876.799841] btrfs_check_shared+0x11a/0x1d0 [btrfs] [ 3876.799870] ? extent_fiemap+0x598/0x6e0 [btrfs] [ 3876.799895] extent_fiemap+0x598/0x6e0 [btrfs] [ 3876.799913] do_vfs_ioctl+0x45a/0x700 [ 3876.799926] ksys_ioctl+0x70/0x80 [ 3876.799938] ? trace_hardirqs_off_thunk+0x1a/0x20 [ 3876.799953] __x64_sys_ioctl+0x16/0x20 [ 3876.799965] do_syscall_64+0x62/0x220 [ 3876.799977] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 3876.799993] RIP: 0033:0x7f23e0013dd7 (...) [ 3876.800056] RSP: 002b:00007f23ddd96ca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 3876.800078] RAX: ffffffffffffffda RBX: 00007f23d80210f8 RCX: 00007f23e0013dd7 [ 3876.800099] RDX: 00007f23d80210f8 RSI: 00000000c020660b RDI: 0000000000000003 [ 3876.800626] RBP: 000055fa2a2a2440 R08: 0000000000000000 R09: 00007f23ddd96d7c [ 3876.801143] R10: 00007f23d8022000 R11: 0000000000000246 R12: 00007f23ddd96d80 [ 3876.801662] R13: 00007f23ddd96d78 R14: 00007f23d80210f0 R15: 00007f23ddd96d80 (...) [ 3876.805107] ---[ end trace e53161e179ef04f9 ]--- Fix that by saving the root's header owner field into a local variable before freeing the root's extent buffer, and then use that local variable when needed. Fixes: 30b0463a ("Btrfs: fix accessing the root pointer in tree mod log functions") CC: stable@vger.kernel.org # 3.10+ Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
Mark Salyzyn authored
commit 5c2e9f34 upstream. When filtering xattr list for reading, presence of trusted xattr results in a security audit log. However, if there is other content no errno will be set, and if there isn't, the errno will be -ENODATA and not -EPERM as is usually associated with a lack of capability. The check does not block the request to list the xattrs present. Switch to ns_capable_noaudit to reflect a more appropriate check. Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Cc: linux-security-module@vger.kernel.org Cc: kernel-team@android.com Cc: stable@vger.kernel.org # v3.18+ Fixes: a082c6f6 ("ovl: filter trusted xattr for non-admin") Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Michal Hocko authored
commit e55d9d9b upstream. Thomas has noticed the following NULL ptr dereference when using cgroup v1 kmem limit: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 16923 Comm: gtk-update-icon Not tainted 4.19.51 #42 Hardware name: Gigabyte Technology Co., Ltd. Z97X-Gaming G1/Z97X-Gaming G1, BIOS F9 07/31/2015 RIP: 0010:create_empty_buffers+0x24/0x100 Code: cd 0f 1f 44 00 00 0f 1f 44 00 00 41 54 49 89 d4 ba 01 00 00 00 55 53 48 89 fb e8 97 fe ff ff 48 89 c5 48 89 c2 eb 03 48 89 ca <48> 8b 4a 08 4c 09 22 48 85 c9 75 f1 48 89 6a 08 48 8b 43 18 48 8d RSP: 0018:ffff927ac1b37bf8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: fffff2d4429fd740 RCX: 0000000100097149 RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff9075a99fbe00 RBP: 0000000000000000 R08: fffff2d440949cc8 R09: 00000000000960c0 R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000 R13: ffff907601f18360 R14: 0000000000002000 R15: 0000000000001000 FS: 00007fb55b288bc0(0000) GS:ffff90761f8c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000007aebc002 CR4: 00000000001606e0 Call Trace: create_page_buffers+0x4d/0x60 __block_write_begin_int+0x8e/0x5a0 ? ext4_inode_attach_jinode.part.82+0xb0/0xb0 ? jbd2__journal_start+0xd7/0x1f0 ext4_da_write_begin+0x112/0x3d0 generic_perform_write+0xf1/0x1b0 ? file_update_time+0x70/0x140 __generic_file_write_iter+0x141/0x1a0 ext4_file_write_iter+0xef/0x3b0 __vfs_write+0x17e/0x1e0 vfs_write+0xa5/0x1a0 ksys_write+0x57/0xd0 do_syscall_64+0x55/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Tetsuo then noticed that this is because the __memcg_kmem_charge_memcg fails __GFP_NOFAIL charge when the kmem limit is reached. This is a wrong behavior because nofail allocations are not allowed to fail. Normal charge path simply forces the charge even if that means to cross the limit. Kmem accounting should be doing the same. Link: http://lkml.kernel.org/r/20190906125608.32129-1-mhocko@kernel.orgSigned-off-by:
Michal Hocko <mhocko@suse.com> Reported-by:
Thomas Lindroth <thomas.lindroth@gmail.com> Debugged-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mark Brown authored
commit 55576cf1 upstream. The kernel has no way of knowing when we have finished instantiating drivers, between deferred probe and systems that build key drivers as modules we might be doing this long after userspace has booted. This has always been a bit of an issue with regulator_init_complete since it can power off hardware that's not had it's driver loaded which can result in user visible effects, the main case is powering off displays. Practically speaking it's not been an issue in real systems since most systems that use the regulator API are embedded and build in key drivers anyway but with Arm laptops coming on the market it's becoming more of an issue so let's do something about it. In the absence of any better idea just defer the powering off for 30s after late_initcall(), this is obviously a hack but it should mask the issue for now and it's no more arbitrary than late_initcall() itself. Ideally we'd have some heuristics to detect if we're on an affected system and tune or skip the delay appropriately, and there may be some need for a command line option to be added. Link: https://lore.kernel.org/r/20190904124250.25844-1-broonie@kernel.orgSigned-off-by:
Mark Brown <broonie@kernel.org> Tested-by:
Lee Jones <lee.jones@linaro.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
commit f18ddc13 upstream. ENOTSUPP is not supposed to be returned to userspace. This was found on an OpenPower machine, where the RTC does not support set_alarm. On that system, a clock_nanosleep(CLOCK_REALTIME_ALARM, ...) results in "524 Unknown error 524" Replace it with EOPNOTSUPP which results in the expected "95 Operation not supported" error. Fixes: 1c6b39ad (alarmtimers: Return -ENOTSUPP if no RTC device is present) Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190903171802.28314-1-cascardo@canonical.comSigned-off-by:
-
Luis Araneda authored
commit b7005d4e upstream. This fixes a kernel panic on memcpy when FORTIFY_SOURCE is enabled. The initial smp implementation on commit aa7eb2bb ("arm: zynq: Add smp support") used memcpy, which worked fine until commit ee333554 ("ARM: 8749/1: Kconfig: Add ARCH_HAS_FORTIFY_SOURCE") enabled overflow checks at runtime, producing a read overflow panic. The computed size of memcpy args are: - p_size (dst): 4294967295 = (size_t) -1 - q_size (src): 1 - size (len): 8 Additionally, the memory is marked as __iomem, so one of the memcpy_* functions should be used for read/write. Fixes: aa7eb2bb ("arm: zynq: Add smp support") Signed-off-by:
Luis Araneda <luaraneda@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Amadeusz Sławiński authored
commit 810f3b86 upstream. If ipc->ops.reply_msg_match is NULL, we may end up using uninitialized mask value. reported by smatch: sound/soc/intel/common/sst-ipc.c:266 sst_ipc_reply_find_msg() error: uninitialized symbol 'mask'. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@intel.com> Link: https://lore.kernel.org/r/20190827141712.21015-3-amadeuszx.slawinski@linux.intel.comReviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Amadeusz Sławiński authored
commit 855a06da upstream. oem_table_id is 8 chars long, so we need to limit it, otherwise it may print some unprintable characters into dmesg. Signed-off-by:
-
Hans de Goede authored
commit 7e0bb582 upstream. Like a bunch of other MSI laptops the MS-1039 uses a 0c45:627b SN9C201 + OV7660 webcam which is mounted upside down. Add it to the sn9c20x flip_dmi_table to deal with this. Cc: stable@vger.kernel.org Reported-by:
Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Sean Christopherson authored
commit 16cfacc8 upstream. Manually generate the PDPTR reserved bit mask when explicitly loading PDPTRs. The reserved bits that are being tracked by the MMU reflect the current paging mode, which is unlikely to be PAE paging in the vast majority of flows that use load_pdptrs(), e.g. CR0 and CR4 emulation, __set_sregs(), etc... This can cause KVM to incorrectly signal a bad PDPTR, or more likely, miss a reserved bit check and subsequently fail a VM-Enter due to a bad VMCS.GUEST_PDPTR. Add a one off helper to generate the reserved bits instead of sharing code across the MMU's calculations and the PDPTR emulation. The PDPTR reserved bits are basically set in stone, and pushing a helper into the MMU's calculation adds unnecessary complexity without improving readability. Oppurtunistically fix/update the comment for load_pdptrs(). Note, the buggy commit also introduced a deliberate functional change, "Also remove bit 5-6 from rsvd_bits_mask per latest SDM.", which was effectively (and correctly) reverted by commit cd9ae5fe ("KVM: x86: Fix page-tables reserved bits"). A bit of SDM archaeology shows that the SDM from late 2008 had a bug (likely a copy+paste error) where it listed bits 6:5 as AVL and A for PDPTEs used for 4k entries but reserved for 2mb entries. I.e. the SDM contradicted itself, and bits 6:5 are and always have been reserved. Fixes: 20c466b5 ("KVM: Use rsvd_bits_mask in load_pdptrs()") Cc: stable@vger.kernel.org Cc: Nadav Amit <nadav.amit@gmail.com> Reported-by:
Doug Reiland <doug.reiland@intel.com> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
