Also add pvcalls-back to the Makefile.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

When the other end notifies us that there is data to be written
(pvcalls_back_conn_event), increment the io and write counters, and
schedule the ioworker.

Implement the write function called by ioworker by reading the data from
the data ring, writing it to the socket by calling inet_sendmsg.

Set out_error on error.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

When an active socket has data available, increment the io and read
counters, and schedule the ioworker.

Implement the read function by reading from the socket, writing the data
to the data ring.

Set in_error on error.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

We have one ioworker per socket. Each ioworker goes through the list of
outstanding read/write requests. Once all requests have been dealt with,
it returns.

We use one atomic counter per socket for "read" operations and one
for "write" operations to keep track of the reads/writes to do.

We also use one atomic counter ("io") per ioworker to keep track of how
many outstanding requests we have in total assigned to the ioworker. The
ioworker finishes when there are none.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Implement backend_disconnect. Call pvcalls_back_release_active on active
sockets and pvcalls_back_release_passive on passive sockets.

Implement module_exit by calling backend_disconnect on frontend
connections.

[ boris: fixed long lines ]
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Release both active and passive sockets. For active sockets, make sure
to avoid possible conflicts with the ioworker reading/writing to those
sockets concurrently. Set map->release to let the ioworker know
atomically that the socket will be released soon, then wait until the
ioworker finishes (flush_work).

Unmap indexes pages and data rings.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Implement poll on passive sockets by requesting a delayed response with
mappass->reqcopy, and reply back when there is data on the passive
socket.

Poll on active socket is unimplemented as by the spec, as the frontend
should just wait for events and check the indexes on the indexes page.

Only support one outstanding poll (or accept) request for every passive
socket at any given time.

[ boris: fixed long lines ]
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Implement the accept command by calling inet_accept. To avoid blocking
in the kernel, call inet_accept(O_NONBLOCK) from a workqueue, which get
scheduled on sk_data_ready (for a passive socket, it means that there
are connections to accept).

Use the reqcopy field to store the request. Accept the new socket from
the delayed work function, create a new sock_mapping for it, map
the indexes page and data ring, and reply to the other end. Allocate an
ioworker for the socket.

Only support one outstanding blocking accept request for every socket at
any time.

Add a field to sock_mapping to remember the passive socket from which an
active socket was created.

[ boris: fixed whitespaces ]
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Call inet_listen to implement the listen command.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Allocate a socket. Track the allocated passive sockets with a new data
structure named sockpass_mapping. It contains an unbound workqueue to
schedule delayed work for the accept and poll commands. It also has a
reqcopy field to be used to store a copy of a request for delayed work.
Reads/writes to it are protected by a lock (the "copy_lock" spinlock).
Initialize the workqueue in pvcalls_back_bind.

Implement the bind command with inet_bind.

The pass_sk_data_ready event handler will be added later.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Allocate a socket. Keep track of socket <-> ring mappings with a new data
structure, called sock_mapping. Implement the connect command by calling
inet_stream_connect, and mapping the new indexes page and data ring.
Allocate a workqueue and a work_struct, called ioworker, to perform
reads and writes to the socket.

When an active socket is closed (sk_state_change), set in_error to
-ENOTCONN and notify the other end, as specified by the protocol.

sk_data_ready and pvcalls_back_ioworker will be implemented later.

[ boris: fixed whitespaces ]
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Just reply with success to the other end for now. Delay the allocation
of the actual socket to bind and/or connect.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

When the other end notifies us that there are commands to be read
(pvcalls_back_event), wake up the backend thread to parse the command.

The command ring works like most other Xen rings, so use the usual
ring macros to read and write to it. The functions implementing the
commands are empty stubs for now.

[ boris: fixed whitespaces ]
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Introduce a per-frontend data structure named pvcalls_fedata. It
contains pointers to the command ring, its event channel, a list of
active sockets and a tree of passive sockets (passing sockets need to be
looked up from the id on listen, accept and poll commands, while active
sockets only on release).

It also has an unbound workqueue to schedule the work of parsing and
executing commands on the command ring. socket_lock protects the two
lists. In pvcalls_back_global, keep a list of connected frontends.

[ boris: fixed whitespaces/long lines ]
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Introduce the code to handle xenbus state changes.

Implement the probe function for the pvcalls backend. Write the
supported versions, max-page-order and function-calls nodes to xenstore,
as required by the protocol.

Introduce stub functions for disconnecting/connecting to a frontend.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Keep a list of connected frontends. Use a semaphore to protect list
accesses.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Introduce a xenbus backend for the pvcalls protocol, as defined by
https://xenbits.xen.org/docs/unstable/misc/pvcalls.html.

This patch only adds the stubs, the code will be added by the following
patches.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Introduce the C header file which defines the PV Calls interface. It is
imported from xen/include/public/io/pvcalls.h.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: konrad.wilk@oracle.com
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Pull MIPS fixes from Ralf Baechle:
 "Another round of MIPS fixes:

   - compressed boot: Ignore a generated .c file

   - VDSO: Fix a register clobber list

   - DECstation: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression

   - Octeon: Fix recent cleanups that cleaned away a bit too much thus
     breaking the arch side of the EDAC and USB drivers.

   - uasm: Fix duplicate const in "const struct foo const bar[]" which
     GCC 7.1 no longer accepts.

   - Fix race on setting and getting cpu_online_mask

   - Fix preemption issue. To do so cleanly introduce macro to get the
     size of L3 cache line.

   - Revert include cleanup that sometimes results in build error

   - MicroMIPS uses bit 0 of the PC to indicate microMIPS mode. Make
     sure this bit is set for kernel entry as well.

   - Prevent configuring the kernel for both microMIPS and MT. There are
     no such CPUs currently and thus the combination is unsupported and
     results in build errors.

  This has been sitting in linux-next for a few days and has survived
  automated testing by Imagination's test farm. No known regressions
  pending except a number of issues that crept up due to lots of people
  switching to GCC 7.1"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Set ISA bit in entry-y for microMIPS kernels
  MIPS: Prevent building MT support for microMIPS kernels
  MIPS: PCI: Fix smp_processor_id() in preemptible
  MIPS: Introduce cpu_tcache_line_size
  MIPS: DEC: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression
  MIPS: VDSO: Fix clobber lists in fallback code paths
  Revert "MIPS: Don't unnecessarily include kmalloc.h into <asm/cache.h>."
  MIPS: OCTEON: Fix USB platform code breakage.
  MIPS: Octeon: Fix broken EDAC driver.
  MIPS: gitignore: ignore generated .c files
  MIPS: Fix race on setting and getting cpu_online_mask
  MIPS: mm: remove duplicate "const" qualifier on insn_table

Merge tag 'driver-core-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are three firmware core fixes for 4.13-rc5.

  All three of these fix reported issues and have been floating around
  for a few weeks. They have been in linux-next with no reported
  problems"

* tag 'driver-core-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  firmware: avoid invalid fallback aborts by using killable wait
  firmware: fix batched requests - send wake up on failure on direct lookups
  firmware: fix batched requests - wake all waiters

Pull char/misc fixes from Greg KH:
 "Here are two patches for 4.13-rc5.

  One is a fix for a reported thunderbolt issue, and the other a fix for
  an MEI driver issue. Both have been in linux-next with no reported
  issues"

* tag 'char-misc-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  thunderbolt: Do not enumerate more ports from DROM than the controller has
  mei: exclude device from suspend direct complete optimization

Pull tty/serial fixes from Greg KH:
 "Here are two tty serial driver fixes for 4.13-rc5. One is a revert of
  a -rc1 patch that turned out to not be a good idea, and the other is a
  fix for the pl011 serial driver.

  Both have been in linux-next with no reported issues"

* tag 'tty-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "serial: Delete dead code for CIR serial ports"
  tty: pl011: fix initialization order of QDF2400 E44

Pull staging/iio fixes from Greg KH:
 "Here are some Staging and IIO driver fixes for 4.13-rc5.

  Nothing major, just a number of small fixes for reported issues. All
  of these have been in linux-next for a while now with no reported
  issues. Full details are in the shortlog"

* tag 'staging-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: comedi: comedi_fops: do not call blocking ops when !TASK_RUNNING
  iio: aspeed-adc: wait for initial sequence.
  iio: accel: bmc150: Always restore device to normal mode after suspend-resume
  staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read
  iio: adc: axp288: Fix the GPADC pin reading often wrongly returning 0
  iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits
  iio: accel: st_accel: add SPI-3wire support
  iio: adc: Revert "axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications"
  iio: adc: sun4i-gpadc-iio: fix unbalanced irq enable/disable
  iio: pressure: st_pressure_core: disable multiread by default for LPS22HB
  iio: light: tsl2563: use correct event code

Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes and new device ids for
  4.13-rc5. There is the usual gadget driver fixes, some new quirks for
  "messy" hardware, and some new device ids.

  All have been in linux-next with no reported issues"

* tag 'usb-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: pl2303: add new ATEN device id
  usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter
  USB: Check for dropped connection before switching to full speed
  usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume
  usb: renesas_usbhs: gadget: fix unused-but-set-variable warning
  usb: renesas_usbhs: Fix UGCTRL2 value for R-Car Gen3
  usb: phy: phy-msm-usb: Fix usage of devm_regulator_bulk_get()
  usb: gadget: udc: renesas_usb3: Fix usb_gadget_giveback_request() calling
  usb: dwc3: gadget: Correct ISOC DATA PIDs for short packets
  USB: serial: option: add D-Link DWM-222 device ID
  usb: musb: fix tx fifo flush handling again
  usb: core: unlink urbs from the tail of the endpoint's urb_list
  usb-storage: fix deadlock involving host lock and scsi_done
  uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069
  USB: hcd: Mark secondary HCD as dead if the primary one died
  USB: serial: cp210x: add support for Qivicon USB ZigBee dongle

Pull another MTD fix from Brian Norris:
 "An mtdblock regression occurred in -rc1 (all writes were broken!), in
  the process of some block subsystem refactoring. Noticed and fixed
  last week, but I'm a little slow on the uptake"

* tag 'for-linus-20170812' of git://git.infradead.org/linux-mtd:
  mtd: blkdevs: Fix mtd block write failure

All the MTD block write requests are failing with
following error messages

    mkfs.ext4  /dev/mtdblock0

    print_req_error: I/O error, dev mtdblock0, sector 0
    Buffer I/O error on dev mtdblock0, logical block 0,
    lost async page write

The control is going to default case after block write request
because of missing return.

Fixes: commit 2a842aca ("block: introduce new block status code type")
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Pull SCSI target fixes from Nicholas Bellinger:
 "The highlights include:

   - Fix iscsi-target payload memory leak during
     ISCSI_FLAG_TEXT_CONTINUE (Varun Prakash)

   - Fix tcm_qla2xxx incorrect use of tcm_qla2xxx_free_cmd during ABORT
     (Pascal de Bruijn + Himanshu Madhani + nab)

   - Fix iscsi-target long-standing issue with parallel delete of a
     single network portal across multiple target instances (Gary Guo +
     nab)

   - Fix target dynamic se_node GPF during uncached shutdown regression
     (Justin Maggard + nab)"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Fix node_acl demo-mode + uncached dynamic shutdown regression
  iscsi-target: Fix iscsi_np reset hung task during parallel delete
  qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT (v2)
  cxgbit: fix sg_nents calculation
  iscsi-target: fix invalid flags in text response
  iscsi-target: fix memory leak in iscsit_setup_text_cmd()
  cxgbit: add missing __kfree_skb()
  tcmu: free old string on reconfig
  tcmu: Fix possible to/from address overflow when doing the memcpy

Pull xen fixes from Juergen Gross:
 "Some fixes for Xen:

   - a fix for a regression introduced in 4.13 for a Xen HVM-guest
     configured with KASLR

   - a fix for a possible deadlock in the xenbus driver when booting the
     system

   - a fix for lost interrupts in Xen guests"

* tag 'for-linus-4.13b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/events: Fix interrupt lost during irq_disable and irq_enable
  xen: avoid deadlock in xenbus
  xen: fix hvm guest with kaslr enabled
  xen: split up xen_hvm_init_shared_info()
  x86: provide an init_mem_mapping hypervisor hook

Pull NFS client fixes from Anna Schumaker:
 "A few more NFS client bugfixes from me for rc5.

  Dros has a stable fix for flexfiles to prevent leaking the
  nfs4_ff_ds_version arrays when freeing a layout, Trond fixed a
  potential recovery loop situation with the TEST_STATEID operation, and
  Christoph fixed up the pNFS blocklayout Kconfig options to prevent
  unsafe use with kernels that don't have large block device support.
  Summary:

  Stable fix:
   - fix leaking nfs4_ff_ds_version array

  Other fixes:
   - improve TEST_STATEID OLD_STATEID handling to prevent recovery loop

   - require 64-bit sector_t for pNFS blocklayout to prevent 32-bit
     compile errors"

* tag 'nfs-for-4.13-5' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  pnfs/blocklayout: require 64-bit sector_t
  NFSv4: Ignore NFS4ERR_OLD_STATEID in nfs41_check_open_stateid()
  nfs/flexfiles: fix leak of nfs4_ff_ds_version arrays

Pull block fixes from Jens Axboe:
 "A set of fixes that should go into this series. This contains:

   - Fix from Bart for blk-mq requeue queue running, preventing a
     continued loop of run/restart.

   - Fix for a bio/blk-integrity issue, in two parts. One from
     Christoph, fixing where verification happens, and one from Milan,
     for a NULL profile.

   - NVMe pull request, most of the changes being for nvme-fc, but also
     a few trivial core/pci fixes"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvme: fix directive command numd calculation
  nvme: fix nvme reset command timeout handling
  nvme-pci: fix CMB sysfs file removal in reset path
  lpfc: support nvmet_fc defer_rcv callback
  nvmet_fc: add defer_req callback for deferment of cmd buffer return
  nvme: strip trailing 0-bytes in wwid_show
  block: Make blk_mq_delay_kick_requeue_list() rerun the queue at a quiet time
  bio-integrity: only verify integrity on the lowest stacked driver
  bio-integrity: Fix regression if profile verify_fn is NULL

Pull MMC fixes from Ulf Hansson:
 "MMC core:

   - fix lockdep splat when removing mmc_block module

   - fix the logic for setting eMMC HS400ES signal voltage

  MMC host:

   - omap_hsmmc: add CMD23 capability to fix -EIO errors"

* tag 'mmc-v4.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: block: fix lockdep splat when removing mmc_block module
  mmc: mmc: correct the logic for setting HS400ES signal voltage
  mmc: host: omap_hsmmc: Add CMD23 capability to omap_hsmmc driver

Pull fbdev fixes from Bartlomiej Zolnierkiewicz:

 - allow user to disable write combined mapping in efifb driver (Dave
   Airlie)

 - fix use after free bugs on driver removal in imxfb driver (Dan
   Carpenter)

 - fix unused variable warning in omapfb driver (Arnd Bergmann)

* tag 'fbdev-v4.13-rc5' of git://github.com/bzolnier/linux:
  efifb: allow user to disable write combined mapping.
  fbdev: omapfb: remove unused variable
  video: fbdev: imxfb: use after free in imxfb_remove()

Pull fuse fixes from Miklos Szeredi:
 "Fix a few bugs in fuse"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: set mapping error in writepage_locked when it fails
  fuse: Dont call set_page_dirty_lock() for ITER_BVEC pages for async_dio
  fuse: initialize the flock flag in fuse_file on allocation

Pull IOMMU fix from Joerg Roedel:
 "Fix a NULL-pointer dereference in arm_smmu_add_device"

* tag 'iommu-fixes-v4.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/arm-smmu: fix null-pointer dereference in arm_smmu_add_device

The blocklayout code does not compile cleanly for a 32-bit sector_t,
and also has no reliable checks for devices sizes, which makes it
unsafe to use with a kernel that doesn't support large block devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 5c83746a ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Pull powerpc fixes from Michael Ellerman:
 "All fixes for code that went in this cycle.

   - a revert of an optimisation to the syscall exit path, which could
     lead to an oops on either older machines or machines with > 1TB of
     memory

   - disable some deep idle states if the firmware configuration for
     them fails

   - re-enable HARD/SOFT lockup detectors in defconfigs after a Kconfig
     change

   - six fairly small patches fixing bugs in our new watchdog code

  Thanks to: Gautham R Shenoy, Nicholas Piggin"

* tag 'powerpc-4.13-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/watchdog: add locking around init/exit functions
  powerpc/watchdog: Fix marking of stuck CPUs
  powerpc/watchdog: Fix final-check recovered case
  powerpc/watchdog: Moderate touch_nmi_watchdog overhead
  powerpc/watchdog: Improve watchdog lock primitive
  powerpc: NMI IPI improve lock primitive
  powerpc/configs: Re-enable HARD/SOFT lockup detectors
  powerpc/powernv/idle: Disable LOSE_FULL_CONTEXT states when stop-api fails
  Revert "powerpc/64: Avoid restore_math call if possible in syscall exit"

Commit c54451a5 "iommu/arm-smmu: Fix the error path in arm_smmu_add_device"
removed fwspec assignment in legacy_binding path as redundant which is
wrong. It needs to be updated after fwspec initialisation in
arm_smmu_register_legacy_master() as it is dereferenced later. Without
this there is a NULL-pointer dereference panic during boot on some hosts.
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Here is a device has xen-pirq-MSI interrupt. Dom0 might lost interrupt
during driver irq_disable/irq_enable. Here is the scenario,
 1. irq_disable -> disable_dynirq -> mask_evtchn(irq channel)
 2. dev interrupt raised by HW and Xen mark its evtchn as pending
 3. irq_enable -> startup_pirq -> eoi_pirq ->
    clear_evtchn(channel of irq) -> clear pending status
 4. consume_one_event process the irq event without pending bit assert
    which result in interrupt lost once
 5. No HW interrupt raising anymore.

Now use enable_dynirq for enable_pirq of xen_pirq_chip to remove
eoi_pirq when irq_enable.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

When starting the xenwatch thread a theoretical deadlock situation is
possible:

xs_init() contains:

    task = kthread_run(xenwatch_thread, NULL, "xenwatch");
    if (IS_ERR(task))
        return PTR_ERR(task);
    xenwatch_pid = task->pid;

And xenwatch_thread() does:

    mutex_lock(&xenwatch_mutex);
    ...
    event->handle->callback();
    ...
    mutex_unlock(&xenwatch_mutex);

The callback could call unregister_xenbus_watch() which does:

    ...
    if (current->pid != xenwatch_pid)
        mutex_lock(&xenwatch_mutex);
    ...

In case a watch is firing before xenwatch_pid could be set and the
callback of that watch unregisters a watch, then a self-deadlock would
occur.

Avoid this by setting xenwatch_pid in xenwatch_thread().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>