- 01 Mar, 2020 10 commits
-
-
Taehee Yoo authored
When HSR interface is sending a frame, it finds a node with the destination ethernet address from the list. If there is no node, it calls WARN_ONCE(). But, using WARN_ONCE() for this situation is a little bit overdoing. So, in this patch, the netdev_err() is used instead. Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Taehee Yoo authored
If HSR uses the extack instead of netdev_info(), users can get error messages immediately without any checking the kernel message. Signed-off-by:
-
Taehee Yoo authored
If it uses debugfs_remove_recursive() instead of debugfs_remove(), hsr_priv() doesn't need to have "node_tbl_file" pointer variable. Signed-off-by:
-
Oleksij Rempel authored
The port to phylink was done as close as possible to initial functionality. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Acked-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
David S. Miller authored
Esben Haabendal says: ==================== net: ll_temac: RX/TX ring size and coalesce ethtool parameters This series adds support for RX/TX ring size and irq coalesce ethtool parameters to ll_temac driver. ==================== Signed-off-by: -
Esben Haabendal authored
Please note that the delays are calculated based on typical parameters. But as TEMAC is an HDL IP, designs may vary, and future work might be needed to make this calculation configurable. Signed-off-by:
Esben Haabendal <esben@geanix.com> Signed-off-by:
-
Esben Haabendal authored
Add support for setting the RX and TX ring sizes for this driver using ethtool. Also increase the default RX ring size as the previous default was far too low for good performance in some configurations. Signed-off-by:
-
Esben Haabendal authored
The start_p variable was included in the initial commit, commit 92744989 ("net: add Xilinx ll_temac device driver"), but has never had any real use. Signed-off-by:
-
Esben Haabendal authored
The tx_bd_next field was included in the initial commit, commit 92744989 ("net: add Xilinx ll_temac device driver"), but has never had any real use. Signed-off-by:
-
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
- 29 Feb, 2020 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-02-28 The following pull-request contains BPF updates for your *net-next* tree. We've added 41 non-merge commits during the last 7 day(s) which contain a total of 49 files changed, 1383 insertions(+), 499 deletions(-). The main changes are: 1) BPF and Real-Time nicely co-exist. 2) bpftool feature improvements. 3) retrieve bpf_sk_storage via INET_DIAG. ==================== Signed-off-by:
-
- 28 Feb, 2020 29 commits
-
-
David S. Miller authored
Paolo Abeni says: ==================== net: cleanup datagram receive helpers Several receive helpers have an optional destructor argument, which uglify the code a bit and is taxed by retpoline overhead. This series refactor the code so that we can drop such optional argument, cleaning the helpers a bit and avoiding an indirect call in fast path. The first patch refactor a bit the caller, so that the second patch actually dropping the argument is more straight-forward v1 -> v2: - call scm_stat_del() only when not peeking - Kirill - fix build issue with CONFIG_INET_ESPINTCP ==================== Signed-off-by: -
Paolo Abeni authored
The only users for such argument are the UDP protocol and the UNIX socket family. We can safely reclaim the accounted memory directly from the UDP code and, after the previous patch, we can do scm stats accounting outside the datagram helpers. Overall this cleans up a bit some datagram-related helpers, and avoids an indirect call per packet in the UDP receive path. v1 -> v2: - call scm_stat_del() only when not peeking - Kirill - fix build issue with CONFIG_INET_ESPINTCP Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Paolo Abeni authored
So the scm_stat_{add,del} helper can be invoked with no additional lock held. This clean-up the code a bit and will make the next patch easier. Signed-off-by: -
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: -
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: -
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: -
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: -
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: -
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] Lastly, fix the following checkpatch warning: CHECK: Prefer kernel type 'u8' over 'uint8_t' #50: FILE: net/l2tp/l2tp_core.h:119: + uint8_t priv[]; /* private data */ This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: -
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: -
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by:Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by:
Björn Töpel <bjorn.topel@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2020-02-27 mlx5 misc updates and minor cleanups: 1) Use per vport tables for mirroring 2) Improve log messages for SW steering (DR) 3) Add devlink fdb_large_groups parameter 4) E-Switch, Allow goto earlier chain 5) Don't allow forwarding between uplink representors 6) Add support for devlink-port in non-representors mode 7) Minor misc cleanups ==================== Signed-off-by: -
Alexei Starovoitov authored
Martin KaFai Lau says: ==================== The bpf_prog can store specific info to a sk by using bpf_sk_storage. In other words, a sk can be extended by a bpf_prog. This series is to support providing bpf_sk_storage data during inet_diag's dump. The primary target is the usage like iproute2's "ss". The first two patches are refactoring works in inet_diag to make adding bpf_sk_storage support easier. The next two patches do the actual work. Please see individual patch for details. v2: - Add commit message for u16 to u32 change in min_dump_alloc in Patch 4 (Song) - Add comment to explain the !skb->len check in __inet_diag_dump in Patch 4. - Do the map->map_type check earlier in Patch 3 for readability. ==================== Signed-off-by:Alexei Starovoitov <ast@kernel.org>
-
Martin KaFai Lau authored
This patch will dump out the bpf_sk_storages of a sk if the request has the INET_DIAG_REQ_SK_BPF_STORAGES nlattr. An array of SK_DIAG_BPF_STORAGE_REQ_MAP_FD can be specified in INET_DIAG_REQ_SK_BPF_STORAGES to select which bpf_sk_storage to dump. If no map_fd is specified, all bpf_sk_storages of a sk will be dumped. bpf_sk_storages can be added to the system at runtime. It is difficult to find a proper static value for cb->min_dump_alloc. This patch learns the nlattr size required to dump the bpf_sk_storages of a sk. If it happens to be the very first nlmsg of a dump and it cannot fit the needed bpf_sk_storages, it will try to expand the skb by "pskb_expand_head()". Instead of expanding it in inet_sk_diag_fill(), it is expanded at a sleepable context in __inet_diag_dump() so __GFP_DIRECT_RECLAIM can be used. In __inet_diag_dump(), it will retry as long as the skb is empty and the cb->min_dump_alloc becomes larger than before. cb->min_dump_alloc is bounded by KMALLOC_MAX_SIZE. The min_dump_alloc is also changed from 'u16' to 'u32' to accommodate a sk that may have a few large bpf_sk_storages. The updated cb->min_dump_alloc will also be used to allocate the skb in the next dump. This logic already exists in netlink_dump(). Here is the sample output of a locally modified 'ss' and it could be made more readable by using BTF later: [root@arch-fb-vm1 ~]# ss --bpf-map-id 14 --bpf-map-id 13 -t6an 'dst [::1]:8989' State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess ESTAB 0 0 [::1]:51072 [::1]:8989 bpf_map_id:14 value:[ 3feb ] bpf_map_id:13 value:[ 3f ] ESTAB 0 0 [::1]:51070 [::1]:8989 bpf_map_id:14 value:[ 3feb ] bpf_map_id:13 value:[ 3f ] [root@arch-fb-vm1 ~]# ~/devshare/github/iproute2/misc/ss --bpf-maps -t6an 'dst [::1]:8989' State Recv-Q Send-Q Local Address:Port Peer Address:Port Process ESTAB 0 0 [::1]:51072 [::1]:8989 bpf_map_id:14 value:[ 3feb ] bpf_map_id:13 value:[ 3f ] bpf_map_id:12 value:[ 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000... total:65407 ] ESTAB 0 0 [::1]:51070 [::1]:8989 bpf_map_id:14 value:[ 3feb ] bpf_map_id:13 value:[ 3f ] bpf_map_id:12 value:[ 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000... total:65407 ] Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200225230427.1976129-1-kafai@fb.com
-
Martin KaFai Lau authored
This patch adds INET_DIAG support to bpf_sk_storage. 1. Although this series adds bpf_sk_storage diag capability to inet sk, bpf_sk_storage is in general applicable to all fullsock. Hence, the bpf_sk_storage logic will operate on SK_DIAG_* nlattr. The caller will pass in its specific nesting nlattr (e.g. INET_DIAG_*) as the argument. 2. The request will be like: INET_DIAG_REQ_SK_BPF_STORAGES (nla_nest) (defined in latter patch) SK_DIAG_BPF_STORAGE_REQ_MAP_FD (nla_put_u32) SK_DIAG_BPF_STORAGE_REQ_MAP_FD (nla_put_u32) ...... Considering there could have multiple bpf_sk_storages in a sk, instead of reusing INET_DIAG_INFO ("ss -i"), the user can select some specific bpf_sk_storage to dump by specifying an array of SK_DIAG_BPF_STORAGE_REQ_MAP_FD. If no SK_DIAG_BPF_STORAGE_REQ_MAP_FD is specified (i.e. an empty INET_DIAG_REQ_SK_BPF_STORAGES), it will dump all bpf_sk_storages of a sk. 3. The reply will be like: INET_DIAG_BPF_SK_STORAGES (nla_nest) (defined in latter patch) SK_DIAG_BPF_STORAGE (nla_nest) SK_DIAG_BPF_STORAGE_MAP_ID (nla_put_u32) SK_DIAG_BPF_STORAGE_MAP_VALUE (nla_reserve_64bit) SK_DIAG_BPF_STORAGE (nla_nest) SK_DIAG_BPF_STORAGE_MAP_ID (nla_put_u32) SK_DIAG_BPF_STORAGE_MAP_VALUE (nla_reserve_64bit) ...... 4. Unlike other INET_DIAG info of a sk which is pretty static, the size required to dump the bpf_sk_storage(s) of a sk is dynamic as the system adding more bpf_sk_storage_map. It is hard to set a static min_dump_alloc size. Hence, this series learns it at the runtime and adjust the cb->min_dump_alloc as it iterates all sk(s) of a system. The "unsigned int *res_diag_size" in bpf_sk_storage_diag_put() is for this purpose. The next patch will update the cb->min_dump_alloc as it iterates the sk(s). Signed-off-by: -
Martin KaFai Lau authored
The INET_DIAG_REQ_BYTECODE nlattr is currently re-found every time when the "dump()" is re-started. In a latter patch, it will also need to parse the new INET_DIAG_REQ_SK_BPF_STORAGES nlattr to learn the map_fds. Thus, this patch takes this chance to store the parsed nlattr in cb->data during the "start" time of a dump. By doing this, the "bc" argument also becomes unnecessary and is removed. Also, the two copies of the INET_DIAG_REQ_BYTECODE parsing-audit logic between compat/current version can be consolidated to one. Signed-off-by:
-
Martin KaFai Lau authored
In a latter patch, there is a need to update "cb->min_dump_alloc" in inet_sk_diag_fill() as it learns the diffierent bpf_sk_storages stored in a sk while dumping all sk(s) (e.g. tcp_hashinfo). The inet_sk_diag_fill() currently does not take the "cb" as an argument. One of the reason is inet_sk_diag_fill() is used by both dump_one() and dump() (which belong to the "struct inet_diag_handler". The dump_one() interface does not pass the "cb" along. This patch is to make dump_one() pass a "cb". The "cb" is created in inet_diag_cmd_exact(). The "nlh" and "in_skb" are stored in "cb" as the dump() interface does. The total number of args in inet_sk_diag_fill() is also cut from 10 to 7 and that helps many callers to pass fewer args. In particular, "struct user_namespace *user_ns", "u32 pid", and "u32 seq" can be replaced by accessing "cb->nlh" and "cb->skb". A similar argument reduction is also made to inet_twsk_diag_fill() and inet_req_diag_fill(). inet_csk_diag_dump() and inet_csk_diag_fill() are also removed. They are mostly equivalent to inet_sk_diag_fill(). Their repeated usages are very limited. Thus, inet_sk_diag_fill() is directly used in those occasions. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller authored
The mptcp conflict was overlapping additions. The SMC conflict was an additional and removal happening at the same time. Signed-off-by: -
Roi Dayan authored
The code is self explanatory and makes the comment redundant. Signed-off-by:
Roi Dayan <roid@mellanox.com> Reviewed-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Eli Cohen authored
mlx5e_tc_offload_to_slow_path() and mlx5e_tc_unoffload_from_slow_path() take an extra argument allocated on the stack of the caller but not used by the caller. Avoid the extra argument and use local variable in the function itself. Signed-off-by:
-
Eli Cohen authored
parse_attr is not used by parse_tc_pedit_action() so revmove it. Signed-off-by:
-
Roi Dayan authored
This to be consistent and adds the module name to the error message. Signed-off-by:
-
Roi Dayan authored
This is for added netdev prefix that helps identify the source of the message. Signed-off-by:
-
Roi Dayan authored
This helps identify the source of the message. If netdev still doesn't exists use mlx5_core_warn(). Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
Erez Shitrit authored
Few print messages are in debug level where they should be in error, and few messages are missing. Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
-
Hamdan Igbaria authored
Change matcher priority parameter type from u16 to u32, this change is needed since sometimes upper levels create a matcher with priority bigger than 2^16. Signed-off-by:
Hamdan Igbaria <hamdani@mellanox.com> Reviewed-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
-
Jianbo Liu authored
Add a devlink parameter to control the number of large groups in a autogrouped flow table. The default value is 15, and the range is between 1 and 1024. The size of each large group can be calculated according to the following formula: size = 4M / (fdb_large_groups + 1). Examples: - Set the number of large groups to 20. $ devlink dev param set pci/0000:82:00.0 name fdb_large_groups \ cmode driverinit value 20 Then run devlink reload command to apply the new value. $ devlink dev reload pci/0000:82:00.0 - Read the number of large groups in flow table. $ devlink dev param show pci/0000:82:00.0 name fdb_large_groups pci/0000:82:00.0: name fdb_large_groups type driver-specific values: cmode driverinit value 20 Signed-off-by:Jianbo Liu <jianbol@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jianbo Liu authored
The prefix should be "MLX5_DEVLINK_PARAM_ID_" for all in mlx5_devlink_param_id enum. Signed-off-by:
-
Vladyslav Tarasiuk authored
Added devlink_port field to mlx5e_priv structure and a callback to netdev ops to enable devlink to get info about the port. The port registration happens at driver initialization. Signed-off-by:
Vladyslav Tarasiuk <vladyslavt@mellanox.com> Reviewed-by:
Moshe Shemesh <moshe@mellanox.com> Reviewed-by:
-
