ARM: dts: zynq: DT changes for v4.19

- Add Z-turn board
- Add mmc aliases
- Fix model information
- Sort out documentatio
- Update Zybo Z7
- Fix gpio-keys

* tag 'zynq-dt-for-v4.19-v2' of https://github.com/Xilinx/linux-xlnx:
  ARM: dts: zynq: Remove #address/#size-cells from gpio-keys
  ARM: dts: zynq: Add LEDs to the Zybo Z7 board
  ARM: dts: zynq: Use gpio constants for the Zybo Z7 board
  ARM: dts: zynq: Fix memory size on the Zybo Z7 board
  dt-bindings: xilinx: zynq: Add missing boards
  dt-bindings: xilinx: zynq: Move Paralella board to Xilinx
  dt-bindings: xilinx: zynq: Sort entries alphabetically
  dt-bindings: xilinx: zynq: Improve boards description
  ARM: dts: zynq: correct and improve the model property of dt files
  ARM: dts: zynq: Set correct manufacturer for ZedBoard and MicroZed boards
  ARM: dts: zynq: Add mmc alias for zc702/zc706/zed/zybo
  ARM: dts: zynq: Add support for Z-turn board
Signed-off-by: Olof Johansson <olof@lixom.net>

arm: dts: zynqmp: DT changes for v4.19

- Use serdev for BT in zcu100
- Remove ep108
- Fix gpio-keys binding
- Add suport for Ultra96

* tag 'zynqmp-dt-for-v4.19-v2' of https://github.com/Xilinx/linux-xlnx:
  arm64: dts: zynqmp: Add support for Avnet Ultra96 rev1 board
  arm64: dts: zynqmp: Remove #address/#size-cells from gpio-keys
  arm64: dts: zynqmp: Remove ep108 board
  arm64: dts: zynqmp: Use serdev for zcu100 BT
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'uniphier-dt64-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt

UniPhier ARM64 SoC DT updates for v4.19

- Add missing #cooling-cells properties

- Add hp-det-gpio property to detect headphone via GPIO

* tag 'uniphier-dt64-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: add headphone detect gpio for LD11 global board
  arm64: dts: uniphier: add headphone detect gpio for LD20 global board
  arm64: dts: uniphier: Add missing cooling device properties for CPUs
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'uniphier-dt-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt

UniPhier ARM SoC DT updates for v4.19

- Add missing #cooling-cells properties

* tag 'uniphier-dt-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  ARM: dts: uniphier: Add missing cooling device properties for CPUs
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.19/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Few more beaglebone variants for v4.19 merge window

This adds dts files for two new beaglebone variants for
Octavo Systems OSD3358-SM-RED and Sancloud am335x-sancloud-bbe.

* tag 'omap-for-v4.19/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x: add am335x-sancloud-bbe board support
  dt-bindings: Add vendor prefix for Sancloud
  ARM: dts: Add DT support for Octavo Systems OSD3358-SM-RED based on TI AM335x
Signed-off-by: Olof Johansson <olof@lixom.net>

dts reports incorrect usage of these properties in gpio-keys node.
Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary

The patch is removing these useless properties.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add an LED node, connected to the Processing System (PS)
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Include GPIO dt-bindings and use GPIO_ACTIVE_* constants
to improve readability
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

According to the reference manual, the board has two Micron
MT41K256M16HA-125 DDR3L memory ICs, which have 512 MiB each

Tested on a ZYBO-Z7-20 board
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

The bindings were missing when the device-tree
files were added
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Move the Adapteva Parallela board to Xilinx dt-bindings,
as it's based on a Zynq SoC from Xilinx
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Sort additional compatible strings (boards) alphabetically
by their manufacturer and model number

This will help when finding a board because they
will be grouped by their manufacturer
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Change the description of some boards to make it similar
to the value of the model property from their respective
device-tree, using the format "<manufacturer> <model>"
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Replace the current value of the model property by a more accurate
description of each board (which includes the manufacturer), as some
of the boards had the same value ("Xilinx Zynq")
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Both boards are made by Avnet, Inc. So add an additional
value to the compatible property
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add missing mmc alias.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add a dts for MYIR Z-turn board and respective target in Makefile.
Signed-off-by: Anton Gerasimov <tossel@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Avnet Ultra96 rev1 board is commercialized Xilinx zcu100 revC/D
internal board. The patch is reusing zcu100 revC files but changing
model description and compatible strings which are used for example by
libmraa.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

dts reports incorrect usage of these properties in gpio-keys node.
Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary

The patch is removing these useless properties.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

ZynqMP Emulation board is no longer tested and there is no reason to
keep maintaining it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Mainline started to use serdev interface for uart attached devices.
Change description to reflect it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch adds GPIO for headphone detection on LD11 global board.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This patch adds GPIO for headphone detection on LD20 global board.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.

Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.

Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The "Beaglebone Enhanced" by Sancloud is based on the Beaglebone Black,
but with the following differences:

 * Gigabit capable PHY
 * Extra USB hub, optional i2c control
 * lps3331ap barometer connected over i2c
 * MPU6050 6 axis MEMS accelerometer/gyro connected over i2c
 * 1GiB DDR3 RAM
 * RTL8723 Wifi/Bluetooth connected over USB

Tested on a revision G board.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add vendor prefix for Sancloud Ltd.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

OSD3358-SM-RED is a dev board for OSD335x System-in-Package(SiP) devices from
Octavo Systems.

This board family can be indentified by the A335BNLTOS00 in the at24 eeprom:
A2: [aa 55 33 ee 41 33 33 35  42 4e 4c 54 4f 53 30 30 |.U3.A335BNLTOS00|]

https://octavosystems.com/octavo_products/osd3358-sm-red/Signed-off-by: Neeraj Dantu <neeraj.dantu@octavosystems.com>
CC: Tony Lindgren <tony@atomide.com>
CC: Robert Nelson <robertcnelson@gmail.com>
CC: Jason Kridner <jkridner@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge tag 'gemini-dts-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt

Gemini DTS updates for v4.19:
- Add Vitesse switch chips
- Add a new DT for a reference design

* tag 'gemini-dts-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: Add devicetree for Storlink/Storm SL93512R
  ARM: dts: Add Vitesse G5e switch to the Gemini SQ201
  ARM: dts: Add WAN ethernet port to the SQ201
Signed-off-by: Olof Johansson <olof@lixom.net>

The Storlink Gemini324 EV-Board also known as Storm
Semiconductor SL93512R_BRD is ground zero for the Gemini
devices. We add a device tree so we can support it, it
turns out to be pretty trivial.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This adds the Vitesse G5e ethernet switch to the Square
One Itian SQ201 router device tree.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This sets up the ethernet interface and PHY for the
WAN ethernet port which uses a Marvell PHY.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'v4.18-rockchip-dts32fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Fix for a new warning from dtc in graph node unit addresses.

* tag 'v4.18-rockchip-dts32fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: fix graph node unit address error from dtc
Signed-off-by: Olof Johansson <olof@lixom.net>

After the work done by Thomas Petazzoni, the NAND chip timings
can be read out from the chip instead of open coded in the
device tree, so let's just remove the timing information.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'stm32-dt-for-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt

STM32 DT updates for v4.19, round 1

Highlights:
----------

-MCU platforms update:
 -Update RTC syscfg bindings on stm32f746 and stm32f429
 -Update IWDG node with LSI clock name on stm32f429

-MPU STM32MP157 platform update:
 -Add HASH support
 -Add m_can support and enable it on EV1 board
 -Add RTC suppoort and enable it on ED1 board
 -Add USB OTG HS support and enable it on EV1 board
 -Enable USB Host EHCI on EV1 board
 -Add DFSDM support
 -Add SPI support
 -Add ETH support and enable it on EV1 board
 -Add IWDG support and enable it on ED1 board
 -Fix useless GPIO aliases and reorder nodes

* tag 'stm32-dt-for-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (22 commits)
  ARM: dts: stm32: update iwdg with lsi clock name for stm32f429
  ARM: dts: stm32: add iwdg2 support for stm32mp157c-ed1
  ARM: dts: stm32: add iwdg2 support for stm32mp157c
  ARM: dts: stm32: Reorder nodes in stm32mp157c-ed1
  ARM: dts: stm32: remove gpio aliases for stm32mp157c
  ARM: dts: stm32: add support of ethernet on stm32mp157c-ev1
  ARM: dts: stm32: Add ethernet dwmac on stm32mp1
  ARM: dts: stm32: Add syscfg on stm32mp1
  ARM: dts: stm32: add SPI1 support on stm32mp157c-ev1
  ARM: dts: stm32: add SPI support on stm32mp157c
  ARM: dts: stm32: Add DFSDM support to stm32mp157c
  ARM: dts: stm32: Add ADC support to stm32mp157c
  ARM: dts: stm32: enable USB OTG HS on stm32mp157c-ev1
  ARM: dts: stm32: add USB OTG HS support for stm32mp157c SoC
  ARM: dts: stm32: enable USB Host (USBH) EHCI controller on stm32mp157c-ev1
  ARM: dts: stm32: enable RTC on stm32mp157c-ed1
  ARM: dts: stm32: add RTC support to stm32mp157c
  ARM: dts: stm32: m_can activation on stm32mp157c-ev1
  ARM: dts: stm32: m_can support to stm32mp157c
  ARM: dts: stm32: Add HASH support on stm32mp157c
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu dt64 for 4.19 (part 1)

Armada 3700
 - Add default memory reservation for ATF
 - Add a node for AVS support
Fix eth3 connector name on the Macchiatobin

* tag 'mvebu-dt64-4.19-1' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: armada-37xx: reserve memory for ATF
  arm64: dts: marvell: armada-37xx: add the node allowing AVS support
  arm64: dts: marvell: mcbin: fix eth3 connector name
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu dt for 4.19 (part 1)

 - Add a new Armada 388 based board: helios4
 - Enable SPI flash by default on SolidRun Armada 38x Microsom

* tag 'mvebu-dt-4.19-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: armada388-clearfog: drop future changes disclaimer
  ARM: dts: armada388-clearfog: enable spi flash
  ARM: dts: armada388-helios4
Signed-off-by: Olof Johansson <olof@lixom.net>

This device-tree pxa update brings :
 - pxa3xx fixes and updates

* tag 'pxa-dt-4.19' of https://github.com/rjarzmik/linux:
  arm: dts: pxa3xx: Add ssp ports to pxa3xx device tree
  arm: dts: pxa3xx: provide correct clk-names property for nand controller node
  ARM: dts: pxa: add label to lcd controller node
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt64-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Samsung DTS ARM64 changes for v4.19

Cleanup from old properties and code-style warnings.

* tag 'samsung-dt64-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Remove leading 0x from unit addresses in Exynos5433
  arm64: dts: exynos: Remove no longer needed samsung thermal properties
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Samsung DTS ARM changes for v4.19

1. Add two new S5Pv210 boards: Samsung Galaxy S and Samsung Galaxy S 4G
   mobile phones.  Both are from family codenamed Aries.  The Samsung
   Galaxy S was released on the market in 2010 with Android operating
   system.  At that time, it was the Samsung's flagship model.
   This brings support for storage (SD card and internal memory), PMIC,
   RTC, fuel-gauge, keys, USB (in peripherial mode) and WiFi.

2. Add missing secondary CPU properties.
3. Cleanup from old files and properties.

* tag 'samsung-dt-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  dt-bindings: samsung: Document bindings for SGH-T959P board
  dt-bindings: samsung: Document bindings for Samsung aries boards
  ARM: dts: s5pv210: Add initial DTS for SGH-T959P phone
  ARM: dts: s5pv210: Add initial DTS for Samsung Galaxy S phone
  ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones
  ARM: dts: s5pv210: Add missing interrupt-controller property to gph2
  ARM: dts: exynos: remove no longer needed samsung thermal properties
  dt-bindings: arm: Remove obsolete insignal-boards.txt
  ARM: dts: exynos: Add missing CPU clocks to secondary CPUs on Exynos542x
  arm: dts: exynos: Add missing cooling device properties for CPUs
Signed-off-by: Olof Johansson <olof@lixom.net>