- 12 Jul, 2018 20 commits
-
-
Tomas Winkler authored
Use ssize_t for rets variables in mei_write(), mei_read(), and mei_cl_write() as well as change the return type of mei_cl_write() to ssize_t, to prevent assignment of possible 64bit size_t to int 32 bit variable. As by product also eliminate warning drivers/misc/mei/client.c:1702:11: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomas Winkler authored
In for loops use same type for counter variable as has the limiting variable. drivers/misc/mei/bus-fixup.c:489:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/misc/mei/hw-txe.c:725:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/misc/mei/hw-txe.c:744:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomas Winkler authored
mei_hbuf_empty_slots() may return with an error in case of circular buffer overflow. This type of error may be caused only by a bug. However currently, the error won't be detected due signed type promotion in comparison to u32. We add explicit check for less then zero and explicit cast in comparison to suppress singn-compare warning. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Usyskin authored
MEI enables writes of complete messages only while read can be performed in parts, hence write should not update the file offset to not break interleaving partial reads with writes. Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomas Winkler authored
if __mei_cl_recv() returns a negative then "bytes_recv" type is promoted to a high positive value in comparison with size_t evaluated by MKHI_FWVER_LEN(1). It results in error condition not to be detected. Cc: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 9078ad92ef86 ("mei: expose fw version to sysfs") Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
We accidentally removed the check for negative returns without considering the issue of type promotion. The "if_version_length" variable is type size_t so if __mei_cl_recv() returns a negative then "bytes_recv" is type promoted to a high positive value and treated as success. Cc: <stable@vger.kernel.org> Fixes: 582ab27a ("mei: bus: fix received data size check in NFC fixup") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Merge tag 'fsi-updates-2018-07-12' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/linux-fsi into char-misc-next Ben writes: FSI fixes and updates: - Reported build fixes - Add configuration of send/echo delayus - Object lifetime fix - Re-arrange some definitions in preparation for adding the CF master
-
Benjamin Herrenschmidt authored
This moves the definitions for various protocol details (message & response codes, delays etc...) out of fsi-master-gpio.c to fsi-master.h in order to share them with other master implementations. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Joel Stanley <joel@jms.id.au>
-
Benjamin Herrenschmidt authored
The embedded struct device needs a release function to be able to successfully remove the driver. We remove the devm_gpiod_put() as they are unnecessary (the resources will be released automatically) and because fsi_master_unregister() will cause the master structure to be freed. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Joel Stanley <joel@jms.id.au>
-
Benjamin Herrenschmidt authored
In the error path of fsi_master_register(), we currently use device_unregister(). This will cause the last reference to the structure to be dropped, thus freeing the enclosing structure, which isn't what the callers want. Use device_del() instead so that we return to the caller with a refcount of 1. The caller can then assume that it must use put_device() after a call to fsi_master_register() regardless of whether the latter suceeded or failed. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
Some definitions are generic to the FSI protocol or any give master implementation. Rename them to remove the "GPIO" prefix in preparation for moving them to a common header. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Joel Stanley <joel@jms.id.au> # Conflicts: # drivers/fsi/fsi-master-gpio.c
-
Benjamin Herrenschmidt authored
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Joel Stanley <joel@jms.id.au>
-
Benjamin Herrenschmidt authored
This adds a few more tracepoints that have proven useful when debugging issues with the FSI bus. This also makes echo_delay() use clock_zeros() instead of open-code it in order to share the tracepoint. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Joel Stanley <joel@jms.id.au>
-
Benjamin Herrenschmidt authored
To configure the send and echo delays Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Joel Stanley <joel@jms.id.au>
-
Benjamin Herrenschmidt authored
What the driver called "FSI_GPIO_PRIME_SLAVE_CLOCKS" is what the FSI spec calls tSendDelay and should be 16 clocks by default. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Joel Stanley <joel@jms.id.au>
-
Benjamin Herrenschmidt authored
Those values control the amount of "dummy" clocks between commands and between a command and its response. This adds a way to configure them from sysfs (to be later extended to defaults in the device-tree). The default remains 16 (the HW default). This is only supported if the backend supports the new link_config() callback to configure the generation of those delays. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Joel Stanley <joel@jms.id.au> ---
-
Benjamin Herrenschmidt authored
Move fsi_slave_set_smode() and its helpers to before it's first user and remove the corresponding forward declaration. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Joel Stanley <joel@jms.id.au>
-
Benjamin Herrenschmidt authored
"dev" is dereferences before it's checked. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Guenter Roeck authored
The driver calls of_platform_device_create() which is only available if OF_ADDRESS is enabled. When building sparc64 images, this results in ERROR: "of_platform_device_create" [drivers/fsi/fsi-sbefifo.ko] undefined! Fixes: 9f4a8a2d ("fsi/sbefifo: Add driver for the SBE FIFO") Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Eddie James authored
There was no unlock of the FFDC mutex. Fixes: 9f4a8a2d ("fsi/sbefifo: Add driver for the SBE FIFO") Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 11 Jul, 2018 1 commit
-
-
Arnd Bergmann authored
Another driver turned up that is missing linux/mod_devicetable.h after the device IDs are split out from linux/platform_device.h: drivers/extcon/extcon-max3355.c:127:34: error: array type has incomplete element type 'struct of_device_id' static const struct of_device_id max3355_match_table[] = { Fixes: ac316725 ("headers: separate linux/mod_devicetable.h from linux/platform_device.h") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 10 Jul, 2018 1 commit
-
-
Arnd Bergmann authored
A couple of drivers produced build errors after the mod_devicetable.h header was split out from the platform_device one, e.g. drivers/media/platform/davinci/vpbe_osd.c:42:40: error: array type has incomplete element type 'struct platform_device_id' drivers/media/platform/davinci/vpbe_venc.c:42:40: error: array type has incomplete element type 'struct platform_device_id' This adds the inclusion where needed. Fixes: ac316725 ("headers: separate linux/mod_devicetable.h from linux/platform_device.h") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 08 Jul, 2018 3 commits
-
-
Sunil Muthuswamy authored
In the VM mode on Hyper-V, currently, when the kernel panics, an error code and few register values are populated in an MSR and the Hypervisor notified. This information is collected on the host. The amount of information currently collected is found to be limited and not very actionable. To gather more actionable data, such as stack trace, the proposal is to write one page worth of kmsg data on an allocated page and the Hypervisor notified of the page address through the MSR. - Sysctl option to control the behavior, with ON by default. Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Srinivas Kandagatla authored
This patch fixes below warning during building htmldoc: slimbus.h:352: warning: Function parameter or member 'name' not described in 'slim_stream_runtime' This patch also removes documentation for state variable in struct slim_stream_runtime which was redundant and removed. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Randy Dunlap authored
arch/arm/plat-samsung/adc.c needs to #include <linux/mod_devicetable.h> explicitly since that header file was removed from <linux/platform_device.h> (it wasn't needed there). Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 07 Jul, 2018 15 commits
-
-
Randy Dunlap authored
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Geert Uytterhoeven authored
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Geert Uytterhoeven authored
As of commit 7124330d ("m68k/uaccess: Revive 64-bit get_user()"), the 64-bit Android binder interface builds fine on m68k. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Kapshuk authored
Checking whether output of commands matches the ver_linux pattern in the version function is original shell implementation legacy code. When the original implementation failed to locate a particular utility, it generated error output along the lines of: ver_linux:line number: command not found. The awk implementation, does not contain the name of the script within the body of the error message returned by the subshell when a given utility fails to be located. The error message returned is along the lines of: sh: name of utility: command not found Safeguarding against the ver_linux pattern being found in the output being parsed may thus be safely omitted. Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Kapshuk authored
Currently, input coming from /proc/self/maps is split into fields without checking whether or not it matches libc.so. This is not efficient. All text processing should only be performed on lines of input that match libc.so. Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matt Ranostay authored
ADC channel 0 photodiode detects both infrared + visible light, but ADC channel 1 just detects infrared. However, the latter is a bit more sensitive in that range so complete darkness or low light causes a error condition in which the chan0 - chan1 is negative that results in a -EAGAIN. This patch changes the resulting lux1_input sysfs attribute message from "Resource temporarily unavailable" to a user-grokable lux value of 0. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
I noticed that the mic driver passes a 'struct timespec64' as part of a message into an attached device, where it is used to set the current system time. This won't actually work if one of the two sides runs a 32-bit kernel and the other runs a 64-bit kernel, since the structure layout is different between the two. I found this while replacing calls to the deprecated do_settimeofday64() interface with the modern ktime_get_real_ts() variant, but it seems appropriate to address both at the same time here. To make sure we have a sane structure, let's define our own structure using the layout of the 64-bit kernel. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Uwe Kleine-König authored
When a siox master device is registered a kthread is created that is only started when triggered by userspace. So this thread might be in TASK_UNINTERRUPTIBLE state for long and trigger a warning [ 241.130465] INFO: task siox-0:626 blocked for more than 120 seconds. with the respective debug settings enabled. It might be right to put an unstarted thread to TASK_IDLE (in kernel/kthread.c:kthread()) instead, but independant of this discussion it is cleaner for siox_master_register() to start the thread immediately. The effect is that it enters its own waiting state and then stays in state TASK_IDLE which doesn't trigger the above warning. As siox_poll_thread() uses some variables of the device the initialisation of these is moved before thread creation. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Gavin Schenk <g.schenk@eckelmann.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Uwe Kleine-König authored
The type bits are part of the per-device status word. So it's natural to consider an error in the type bits as a status error instead of only resulting in an unsynced state. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Gavin Schenk <g.schenk@eckelmann.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wei Yongjun authored
The function alloc_dma_buffer() is called from ibmvmc_add_buffer(), in which a spin lock be held here, so we should use GFP_ATOMIC when a lock is held. Fixes: 0eca353e ("misc: IBM Virtual Management Channel Driver (VMC)") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
The problem is that if get_user_pages_fast() fails and returns a negative error code, it gets type promoted to a high positive value and treated as a success. Fixes: 06164d2b ("VMCI: queue pairs implementation.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-