- 03 Jul, 2011 40 commits
-
-
Dan Williams authored
Now that phys_to_virt() and virt_to_phys() have been removed we are no longer violating the dma mapping (or kmap apis). Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Ross says: "The memory allocation for these requests doesn’t take into account the additional memory needed when the code in scic_sds_s[mst]p_request_assign_buffers() shifts the struct scu_task_context so that it is cache line aligned: In an example from my machine, total buffer that I’ve given to SCIC goes from 0x410024566f84 to 0x410024567308. From this same example, this call shifts my task_context_buffer from 0x410024567208 to 0x410024567240. This means that the task_context_buffer that used to range from 0x410024567208 to 0x410024567308 instead now goes from 0x410024567240 to 0x410024567340. When the memset() call at the end of scic_task_request_construct() clears out this task_context_buffer, it does so from 0x410024567240 to 0x410024567340, effectively killing whatever buffer follows this allocation in memory." djbw: Use the kernel's PTR_ALIGN instead of scic_sds_request_align_task_context_buffer() and SMP_CACHE_BYTES instead of the local CACHE_LINE_SIZE definition. TODO: These allocations really want to be better defined in a union rather than opaque buffers carved up by macros. Reported-by: Ross Zwisler <ross.zwisler@intel.com> Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
When aborting a task context we need to be sure that the hardware has acted on this request (retrieved the task context) before invalidating the remote node context. In the case of the "dummy" task context and remote node we do not have the full state machine that goes through the complete tc abort and rnc invalidate states. Instead we ensure the hardware has seen and acted on Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dave Jiang authored
Moving some of the chattiness of warning messages to debug so only the Linux system messages are shown. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dave Jiang authored
Adding support for PHY_FUNC_LINK_RESET and PHY_FUNC_DISABLE. This allow the sysfs knob enable (both 0 and 1) and link_reset to work properly. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Pawel Marek authored
Core reworks to support stopping and re-starting the controller, lays the groundwork for phy disable / re-enable and fixes other bugs around port/phy setup/teardown. Signed-off-by: Pawel Marek <pawel.marek@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Piotr Sawicki authored
Observed that some devices return a d2h fis, treat like an sdb error fis. Signed-off-by: Piotr Sawicki <piotr.sawicki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Tomasz Chudy authored
There is a condition whereby TCs (task contexts) can jump to the head of the round robin queue causing indefinite starvation of pending tasks. Posting a TC to a suspended RNC (remote node context) causes the hardware to select that task first, but since the RNC is suspended the scheduler proceeds to the next task in the expected round robin fashion, restoring TC arbitration fairness. Signed-off-by: Tomasz Chudy <tomasz.chudy@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Prepare the timer api for the arrival of dynamic creation and destruction events from the core. It pretended to do this previously but the core to date only used it in a static init-time only fashion. This is an interim fix until a cleaner event queue can be developed. 1/ make all locking external to the api (add WARN_ONCE to verify) 2/ add a timer_destroy interface (to be used by the core) 3/ use del_timer_sync() prior to deallocating timer data 4/ delete the "timer_list" indirection, we only have timers allocated for the isci_host 5/ fix detection of timer list allocation errors Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Undo the open coded and incorrect translation of the oem parameter sas address to its libsas expected format. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dave Jiang authored
Removed all callbacks in the deprecated.c. Core will call the appropriate functions directly. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dave Jiang authored
Renaming the callbacks to apparopriate event notify calls for the LLDD. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dave Jiang authored
Remove abstraction for SG building and get rid of callbacks for getting DMA memory mapping. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dave Jiang authored
We can copy the data directly to and from sg for SATA PIO read operations. There is no reason to involve the hardware SGL. In the process we also need to kmap the sg because we don't know where that can come from. We also do to not call phys_to_virt(). The driver already has the information. We can just calculcate the appropriate offets. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dave Jiang authored
These macros are not necessary. We can do 64bit math directly. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Piotr Sawicki authored
Sending aborts/resets to SAS/SATA targets in APC mode eventually causes an assert in scic_sds_apc_agent_link_up(). We need to handle the hard reset case for apc mode ports. Signed-off-by: Piotr Sawicki <piotr.sawicki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Tomasz Chudy authored
Update the SCI Core to comprehend the changes in the TC completion codes from A0 to B0. Specifically, there isnew R_ER code differences for command and data FISes. Changes are as follows: 1) 0x16 now additionally indicates an R_ERR received for a COMMAND FIS being sent to a SATA target. 0x16 for SSP still indicates a NAK received for a COMMAND frame. Fix is to retry TC to be compliant with SATA spec or ensure proper error handling of return value (not spec compliant I don't believe). 2) 0x1B was previously called DONE_BREAK_RCVD for STP and DONE_LL_ABORT_ERR for SSP. Now it is universally called DONE_LL_ABORT_ERR. This is purely a superficial change. 3) 0x32 is no longer a reserved code. Now it indicates DONE_CMD_SDMA_ERR for STP/SSP. There was a fatal error on the SDMA for a command IU (includes Raw frames). Consider retry, but at a minimum gracefully fail the request. 4) 0x33 is no longer a reserved code. Now it indicates DONE_CMD_LL_ABORT_ERR for SSP. There was a break receivd during transmission of a command IU. Consider retry, but at a minimum gracefully fail the request. Signed-off-by: Tomasz Chudy <Tomasz.Chudy@intel.com> Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Use the dynamic revision detection code in scic_sds_phy_link_layer_initialization() and apply some coding style fixups (long deref chains). The compile time max link rate setting is removed in favor of honoring the user-parameter max. Reported-by: Krzysztof Wierzbicki <Krzysztof.Wierzbicki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jacek Danecki authored
Add support for the following parameters in SCIC: /** * This field specifies the NOTIFY (ENABLE SPIN UP) primitive * insertion frequency for this phy index. */ u32 notify_enable_spin_up_insertion_frequency; /** * This method specifies the number of transmitted DWORDs within which * to transmit a single ALIGN primitive. This value applies regardless * of what type of device is attached or connection state. A value of * 0 indicates that no ALIGN primitives will be inserted. */ u16 align_insertion_frequency; /** * This method specifies the number of transmitted DWORDs within which * to transmit 2 ALIGN primitives. This applies for SAS connections * only. A minimum value of 3 is required for this field. */ u16 in_connection_align_insertion_frequency; Signed-off-by: Krzysztof Wierzbicki <Krzysztof.Wierzbicki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Henryk Dembkowski authored
At init and RNC resume we need to touch every phy in a port to be sure we have initialized STP properties in the case where port_index != phy_index. Also add some missing __iomem annotations. Signed-off-by: Henryk Dembkowski <henryk.dembkowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Tomasz Chudy authored
The default should be 5us. The hardware encodes it in 256ns increments, so the value should be 20 to approximate a 5us timeout. Signed-off-by: Tomasz Chudy <Tomasz.Chudy@intel.com> Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
c99 the struct initializers: 1/ allows grep to consistently show method name associations. The naming is mostly consistent (except when it isn't) so this guarantees coverage of present and future exception cases. 2/ let's the compiler guarantee that the state table array entry correlates with an actual state name and detect accidental reordering or deletion of states. / allows default handler's to be identified easily Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dave Jiang authored
Moved the firmware loading from per adapter to per PCI device. This should prevent firmware from being loaded twice becuase of 2 SCU controller per PCI device. We do have to do it per PCI device because request_firmware() requires a struct device passed in. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Havard Skinnemoen authored
The proc_name field in struct scsi_host_template is exported through sysfs and allows userspace tools to identify the driver behind a particular SCSI host controller. Initialize this field so that userspace tools can easily identify isci host controllers through sysfs. Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Edmund Nadolski authored
This removes scic_controller_get_handler_methods and its associated unused code. Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> [djbw: kill off the legacy handler, now that we have basic error isr support] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Some of the chain walks to get back to our dev are invalid. isci_remote_device_change_state: delete rather than adding conditional deref chain walking isci_request_change_state: fix, it was being called too early isci_request_ssp_io_request_get_lun: fix compile breakage hidden by ifdef DEBUG Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Inform libsas of the linkrate of direct attached links. Reported-by: Haavard Skinnemoen <hskinnemoen@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Add basic support for handling/reporting error interrupts. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Edmund Nadolski authored
Polling the event queue during scan is an unneeded holdover from the original driver. Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> [djbw: ensure we flush all port events and domain discovery] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
The lldd actively disallows requests in the "starting" state. Retrying or holding off commands in this state is sub-optimal: 1/ it adds another state check to the fast path 2/ retrying can cause libsas to give up However, isci's ->lldd_dev_found() routine already waits for controller start to complete before allowing further progress. Checking the "starting" state in isci_task_execute_task and the isr is redundant and misleading. Clean this up and introduce a controller-wide event queue to start reeling in "completion" proliferation in the driver. The "stopping" state cleanups are in a similar vein, rely on the the isr and other paths being precluded from occurring rather than implementing state checking logic. Reported-by: Christoph Hellwig <hch@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
The indirection is unecessary and broken in the current case that assigns the handlers based on a not up-to-date pdev->msix_enabled value. Route the handlers directly to the requisite core routines. Todo: hook up error interrupt handling Reported-by: Jeff Garzik <jeff@garzik.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
This will be replaced by state machine tracepoints and should have been a part of the logger removal. Ran across scic_sds_port_decrement_request_count() which is an ugly macro which silently hides accounting errors. Turn it into a WARN_ONCE to see if it ever triggers. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Callbacks are already type unsafe, obfuscating things further by casting the callback routine is less safe because now function argument number changes will not be caught by the compiler. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Henryk Dembkowski authored
Change names from upper to low letters Signed-off-by: Henryk Dembkowski <henryk.dembkowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Remove duplicated license and header file includes that were leftover from commit 4c1db2d0 "isci: consolidate core" (in the isci.git historical branch). Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Henryk Dembkowski authored
scic_sds_stp_remote_device_ready_substate_handler_table[] scic_sds_smp_remote_device_ready_substate_handler_table[] c99 the struct initializers: 1/ allows grep to consistently show method name associations. The naming is mostly consistent (except when it isn't) so this guarantees coverage of present and future exception cases. 2/ let's the compiler guarantee that the state table array entry correlates with an actual state name and detect accidental reordering or deletion of states. 3/ allows default handler's to be identified easily Signed-off-by: Henryk Dembkowski <henryk.dembkowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Henryk Dembkowski authored
Change names from upper to low letters Signed-off-by: Henryk Dembkowski <henryk.dembkowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Henryk Dembkowski authored
c99 the struct initializers (scic_sds_remote_device_state_handler_table[]): 1/ allows grep to consistently show method name associations. The naming is mostly consistent (except when it isn't) so this guarantees coverage of present and future exception cases. 2/ let's the compiler guarantee that the state table array entry correlates with an actual state name and detect accidental reordering or deletion of states. 3/ allows default handler's to be identified easily Change names from upper to low letters Cleanup empty lines Signed-off-by: Henryk Dembkowski <henryk.dembkowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dave Jiang authored
We no longer use the loglevel parameter. Remove. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Edmund Nadolski authored
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> [rebased after killing SCI_IO_REQUEST_DATA_DIRECTION] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-