This change uses SCHED_CPUFREQ_IOWAIT flag to boost HWP performance.
Since SCHED_CPUFREQ_IOWAIT flag is set frequently, we don't start
boosting steps unless we see two consecutive flags in two ticks. This
avoids boosting due to IO because of regular system activities.

To avoid synchronization issues, the actual processing of the flag is
done on the local CPU callback.
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Added two utility functions to HWP boost up gradually and boost down to
the default cached HWP request values.

Boost up:
Boost up updates HWP request minimum value in steps. This minimum value
can reach upto at HWP request maximum values depends on how frequently,
this boost up function is called. At max, boost up will take three steps
to reach the maximum, depending on the current HWP request levels and HWP
capabilities. For example, if the current settings are:
If P0 (Turbo max) = P1 (Guaranteed max) = min
        No boost at all.
If P0 (Turbo max) > P1 (Guaranteed max) = min
        Should result in one level boost only for P0.
If P0 (Turbo max) = P1 (Guaranteed max) > min
        Should result in two level boost:
                (min + p1)/2 and P1.
If P0 (Turbo max) > P1 (Guaranteed max) > min
        Should result in three level boost:
                (min + p1)/2, P1 and P0.
We don't set any level between P0 and P1 as there is no guarantee that
they will be honored.

Boost down:
After the system is idle for hold time of 3ms, the HWP request is reset
to the default value from HWP init or user modified one via sysfs.

Caching of HWP Request and Capabilities
Store the HWP request value last set using MSR_HWP_REQUEST and read
MSR_HWP_CAPABILITIES. This avoid reading of MSRs in the boost utility
functions.

These boost utility functions calculated limits are based on the latest
HWP request value, which can be modified by setpolicy() callback. So if
user space modifies the minimum perf value, that will be accounted for
every time the boost up is called. There will be case when there can be
contention with the user modified minimum perf, in that case user value
will gain precedence. For example just before HWP_REQUEST MSR is updated
from setpolicy() callback, the boost up function is called via scheduler
tick callback. Here the cached MSR value is already the latest and limits
are updated based on the latest user limits, but on return the MSR write
callback called from setpolicy() callback will update the HWP_REQUEST
value. This will be used till next time the boost up function is called.

In addition add a variable to control HWP dynamic boosting. When HWP
dynamic boost is active then set the HWP specific update util hook. The
contents in the utility hooks will be filled in the subsequent patches.
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The ti_cpufreq_probe() function uses regular kzalloc to allocate
the ti_cpufreq_data structure and kfree for freeing this memory
on failures. Simplify this code by using the devres managed
API.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 05829d94 (cpufreq: ti-cpufreq: kfree opp_data when
failure) has fixed a memory leak in the failure path, however
the patch returned a positive value on get_cpu_device() failure
instead of the previous negative value. Fix this incorrect error
return value properly.

Fixes: 05829d94 (cpufreq: ti-cpufreq: kfree opp_data when failure)
Cc: 4.14+ <stable@vger.kernel.org> # v4.14+
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The acpi_cpufreq_fast_switch() function is local to the source and
does not need to be in global scope, so make it static.

Cleans up sparse warning:
drivers/cpufreq/acpi-cpufreq.c:468:14: warning: symbol
'acpi_cpufreq_fast_switch' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Building the kryo cpufreq driver while QCOM_SMEM is a loadable module
results in a link error:

drivers/cpufreq/qcom-cpufreq-kryo.o: In function `qcom_cpufreq_kryo_probe':
qcom-cpufreq-kryo.c:(.text+0xbc): undefined reference to `qcom_smem_get'

The problem is that Kconfig ignores interprets the dependency as met
when the dependent symbol is a 'bool' one. By making it 'tristate',
it will be forced to be a module here, which builds successfully.

Fixes: 46e2856b (cpufreq: Add Kryo CPU scaling driver)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull power management updates from Rafael Wysocki:
 "These include a significant update of the generic power domains
  (genpd) and Operating Performance Points (OPP) frameworks, mostly
  related to the introduction of power domain performance levels,
  cpufreq updates (new driver for Qualcomm Kryo processors, updates of
  the existing drivers, some core fixes, schedutil governor
  improvements), PCI power management fixes, ACPI workaround for
  EC-based wakeup events handling on resume from suspend-to-idle, and
  major updates of the turbostat and pm-graph utilities.

  Specifics:

   - Introduce power domain performance levels into the the generic
     power domains (genpd) and Operating Performance Points (OPP)
     frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter).

   - Fix two issues in the runtime PM framework related to the
     initialization and removal of devices using device links (Ulf
     Hansson).

   - Clean up the initialization of drivers for devices in PM domains
     (Ulf Hansson, Geert Uytterhoeven).

   - Fix a cpufreq core issue related to the policy sysfs interface
     causing CPU online to fail for CPUs sharing one cpufreq policy in
     some situations (Tao Wang).

   - Make it possible to use platform-specific suspend/resume hooks in
     the cpufreq-dt driver and make the Armada 37xx DVFS use that
     feature (Viresh Kumar, Miquel Raynal).

   - Optimize policy transition notifications in cpufreq (Viresh Kumar).

   - Improve the iowait boost mechanism in the schedutil cpufreq
     governor (Patrick Bellasi).

   - Improve the handling of deferred frequency updates in the schedutil
     cpufreq governor (Joel Fernandes, Dietmar Eggemann, Rafael Wysocki,
     Viresh Kumar).

   - Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin).

   - Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry
     Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman, Viresh
     Kumar).

   - Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag set
     and update stale comments in the PCI core PM code (Rafael Wysocki).

   - Work around an issue related to the handling of EC-based wakeup
     events in the ACPI PM core during resume from suspend-to-idle if
     the EC has been put into the low-power mode (Rafael Wysocki).

   - Improve the handling of wakeup source objects in the PM core (Doug
     Berger, Mahendran Ganesh, Rafael Wysocki).

   - Update the driver core to prevent deferred probe from breaking
     suspend/resume ordering (Feng Kan).

   - Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael
     Wysocki).

   - Make the core suspend/resume code and cpufreq support the RT patch
     (Sebastian Andrzej Siewior, Thomas Gleixner).

   - Consolidate the PM QoS handling in cpuidle governors (Rafael
     Wysocki).

   - Fix a possible crash in the hibernation core (Tetsuo Handa).

   - Update the rockchip-io Adaptive Voltage Scaling (AVS) driver (David
     Wu).

   - Update the turbostat utility (fixes, cleanups, new CPU IDs, new
     command line options, built-in "Low Power Idle" counters support,
     new POLL and POLL% columns) and add an entry for it to MAINTAINERS
     (Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner,
     Prarit Bhargava, Srinivas Pandruvada).

   - Update the pm-graph to version 5.1 (Todd Brandt).

   - Update the intel_pstate_tracer utility (Doug Smythies)"

* tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (128 commits)
  tools/power turbostat: update version number
  tools/power turbostat: Add Node in output
  tools/power turbostat: add node information into turbostat calculations
  tools/power turbostat: remove num_ from cpu_topology struct
  tools/power turbostat: rename num_cores_per_pkg to num_cores_per_node
  tools/power turbostat: track thread ID in cpu_topology
  tools/power turbostat: Calculate additional node information for a package
  tools/power turbostat: Fix node and siblings lookup data
  tools/power turbostat: set max_num_cpus equal to the cpumask length
  tools/power turbostat: if --num_iterations, print for specific number of iterations
  tools/power turbostat: Add Cannon Lake support
  tools/power turbostat: delete duplicate #defines
  x86: msr-index.h: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
  tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
  tools/power turbostat: add POLL and POLL% column
  tools/power turbostat: Fix --hide Pk%pc10
  tools/power turbostat: Build-in "Low Power Idle" counters support
  tools/power turbostat: Don't make man pages executable
  tools/power turbostat: remove blank lines
  tools/power turbostat: a small C-states dump readability immprovement
  ...

Pull block fixes from Jens Axboe:
 "This just contains the dm kzalloc fix that was discussed, and a fix
  that I queued up yesterday for a case where blk-mq doesn't honor the
  stop bit appropriately"

* tag 'for-linus-20180605' of git://git.kernel.dk/linux-block:
  dm: Use kzalloc for all structs with embedded biosets/mempools
  blk-mq: return when hctx is stopped in blk_mq_run_work_fn

Merge faddr2line updates from Josh Poimboeuf:

 - revert faddr2line's default output to its original non-code-listing
   output, and make the code listing an optional feature

 - give faddr2line a real maintainer, so get_maintainer.pl will actually
   CC me on future patches

* emailed patches from Josh Poimboeuf <jpoimboe@redhat.com>:
  MAINTAINERS: add Josh Poimboeuf as faddr2line maintainer
  scripts/faddr2line: make the new code listing format optional

... so I finally get credit for my greatest accomplishment.

And, less importantly, so get_maintainer.pl will actually CC me on
future patches.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 6870c016 ("scripts/faddr2line: show the code context")
radically altered the output format of the faddr2line tool.  And while
the new list output format might have merit it broke my vim usage and
was hard to read.

Make the new format optional; using a '--list' argument and attempt to
make the output slightly easier to read by adding a little whitespace to
separate the different files and explicitly mark the line in question.

Cc: Changbin Du <changbin.du@intel.com>
Fixes: 6870c016 ("scripts/faddr2line: show the code context")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mempool_init()/bioset_init() require that the mempools/biosets be zeroed
first; they probably should not _require_ this, but not allocating those
structs with kzalloc is a fairly nonsensical thing to do (calling
mempool_exit()/bioset_exit() on an uninitialized mempool/bioset is legal
and safe, but only works if said memory was zeroed.)
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull x86 hyperv updates from Thomas Gleixner:
 "A set of commits to enable APIC enlightenment when running as a guest
  on Microsoft HyperV.

  This accelerates the APIC access with paravirtualization techniques,
  which are called enlightenments on Hyper-V"

* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/Hyper-V/hv_apic: Build the Hyper-V APIC conditionally
  x86/Hyper-V/hv_apic: Include asm/apic.h
  X86/Hyper-V: Consolidate the allocation of the hypercall input page
  X86/Hyper-V: Consolidate code for converting cpumask to vpset
  X86/Hyper-V: Enhanced IPI enlightenment
  X86/Hyper-V: Enable IPI enlightenments
  X86/Hyper-V: Enlighten APIC access

Pull x86 cache resource controller updates from Thomas Gleixner:
 "An update for the Intel Resource Director Technolgy (RDT) which adds a
  feedback driven software controller to runtime adjust the bandwidth
  allocation MSRs.

  This makes the allocations more accurate and allows to use bandwidth
  values in understandable units (MB/s) instead of using percentage
  based allocations as the original, still available, interface.

  The software controller can be enabled with a new mount option for the
  resctrl filesystem"

* 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel_rdt/mba_sc: Feedback loop to dynamically update mem bandwidth
  x86/intel_rdt/mba_sc: Prepare for feedback loop
  x86/intel_rdt/mba_sc: Add schemata support
  x86/intel_rdt/mba_sc: Add initialization support
  x86/intel_rdt/mba_sc: Enable/disable MBA software controller
  x86/intel_rdt/mba_sc: Documentation for MBA software controller(mba_sc)

Pull time/Y2038 updates from Thomas Gleixner:

 - Consolidate SySV IPC UAPI headers

 - Convert SySV IPC to the new COMPAT_32BIT_TIME mechanism

 - Cleanup the core interfaces and standardize on the ktime_get_* naming
   convention.

 - Convert the X86 platform ops to timespec64

 - Remove the ugly temporary timespec64 hack

* 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  x86: Convert x86_platform_ops to timespec64
  timekeeping: Add more coarse clocktai/boottime interfaces
  timekeeping: Add ktime_get_coarse_with_offset
  timekeeping: Standardize on ktime_get_*() naming
  timekeeping: Clean up ktime_get_real_ts64
  timekeeping: Remove timespec64 hack
  y2038: ipc: Redirect ipc(SEMTIMEDOP, ...) to compat_ksys_semtimedop
  y2038: ipc: Enable COMPAT_32BIT_TIME
  y2038: ipc: Use __kernel_timespec
  y2038: ipc: Report long times to user space
  y2038: ipc: Use ktime_get_real_seconds consistently
  y2038: xtensa: Extend sysvipc data structures
  y2038: powerpc: Extend sysvipc data structures
  y2038: sparc: Extend sysvipc data structures
  y2038: parisc: Extend sysvipc data structures
  y2038: mips: Extend sysvipc data structures
  y2038: arm64: Extend sysvipc compat data structures
  y2038: s390: Remove unneeded ipc uapi header files
  y2038: ia64: Remove unneeded ipc uapi header files
  y2038: alpha: Remove unneeded ipc uapi header files
  ...

Pull timers and timekeeping updates from Thomas Gleixner:

 - Core infrastucture work for Y2038 to address the COMPAT interfaces:

     + Add a new Y2038 safe __kernel_timespec and use it in the core
       code

     + Introduce config switches which allow to control the various
       compat mechanisms

     + Use the new config switch in the posix timer code to control the
       32bit compat syscall implementation.

 - Prevent bogus selection of CPU local clocksources which causes an
   endless reselection loop

 - Remove the extra kthread in the clocksource code which has no value
   and just adds another level of indirection

 - The usual bunch of trivial updates, cleanups and fixlets all over the
   place

 - More SPDX conversions

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  clocksource/drivers/mxs_timer: Switch to SPDX identifier
  clocksource/drivers/timer-imx-tpm: Switch to SPDX identifier
  clocksource/drivers/timer-imx-gpt: Switch to SPDX identifier
  clocksource/drivers/timer-imx-gpt: Remove outdated file path
  clocksource/drivers/arc_timer: Add comments about locking while read GFRC
  clocksource/drivers/mips-gic-timer: Add pr_fmt and reword pr_* messages
  clocksource/drivers/sprd: Fix Kconfig dependency
  clocksource: Move inline keyword to the beginning of function declarations
  timer_list: Remove unused function pointer typedef
  timers: Adjust a kernel-doc comment
  tick: Prefer a lower rating device only if it's CPU local device
  clocksource: Remove kthread
  time: Change nanosleep to safe __kernel_* types
  time: Change types to new y2038 safe __kernel_* types
  time: Fix get_timespec64() for y2038 safe compat interfaces
  time: Add new y2038 safe __kernel_timespec
  posix-timers: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME
  time: Introduce CONFIG_COMPAT_32BIT_TIME
  time: Introduce CONFIG_64BIT_TIME in architectures
  compat: Enable compat_get/put_timespec64 always
  ...

Pull x86 RAS updates from Thomas Gleixner:

 - Fix a stack out of bounds write in the MCE error injection code.

 - Avoid IPIs during CPU hotplug to read the MCx_MISC block address from
   a remote CPU. That's fragile and pointless because the block
   addresses are the same on all CPUs. So they can be read once and
   local.

 - Add support for MCE broadcasting on newer VIA Centaur CPUs.

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/MCE/AMD: Read MCx_MISC block addresses on any CPU
  x86/MCE: Fix stack out-of-bounds write in mce-inject.c: Flags_read()
  x86/MCE: Enable MCE broadcasting on new Centaur CPUs

Pull irq updates from Thomas Gleixner:

 - Consolidation of softirq pending:

   The softirq mask and its accessors/mutators have many implementations
   scattered around many architectures. Most do the same things
   consisting in a field in a per-cpu struct (often irq_cpustat_t)
   accessed through per-cpu ops. We can provide instead a generic
   efficient version that most of them can use. In fact s390 is the only
   exception because the field is stored in lowcore.

 - Support for level!?! triggered MSI (ARM)

   Over the past couple of years, we've seen some SoCs coming up with
   ways of signalling level interrupts using a new flavor of MSIs, where
   the MSI controller uses two distinct messages: one that raises a
   virtual line, and one that lowers it. The target MSI controller is in
   charge of maintaining the state of the line.

   This allows for a much simplified HW signal routing (no need to have
   hundreds of discrete lines to signal level interrupts if you already
   have a memory bus), but results in a departure from the current idea
   the kernel has of MSIs.

 - Support for Meson-AXG GPIO irqchip

 - Large stm32 irqchip rework (suspend/resume, hierarchical domains)

 - More SPDX conversions

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  ARM: dts: stm32: Add exti support to stm32mp157 pinctrl
  ARM: dts: stm32: Add exti support for stm32mp157c
  pinctrl/stm32: Add irq_eoi for stm32gpio irqchip
  irqchip/stm32: Add suspend/resume support for hierarchy domain
  irqchip/stm32: Add stm32mp1 support with hierarchy domain
  irqchip/stm32: Prepare common functions
  irqchip/stm32: Add host and driver data structures
  irqchip/stm32: Add suspend support
  irqchip/stm32: Add falling pending register support
  irqchip/stm32: Checkpatch fix
  irqchip/stm32: Optimizes and cleans up stm32-exti irq_domain
  irqchip/meson-gpio: Add support for Meson-AXG SoCs
  dt-bindings: interrupt-controller: New binding for Meson-AXG SoC
  dt-bindings: interrupt-controller: Fix the double quotes
  softirq/s390: Move default mutators of overwritten softirq mask to s390
  softirq/x86: Switch to generic local_softirq_pending() implementation
  softirq/sparc: Switch to generic local_softirq_pending() implementation
  softirq/powerpc: Switch to generic local_softirq_pending() implementation
  softirq/parisc: Switch to generic local_softirq_pending() implementation
  softirq/ia64: Switch to generic local_softirq_pending() implementation
  ...

Pull x86 dax updates from Ingo Molnar:
 "This contains x86 memcpy_mcsafe() fault handling improvements the
  nvdimm tree would like to make more use of"

* 'x86-dax-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm/memcpy_mcsafe: Define copy_to_iter_mcsafe()
  x86/asm/memcpy_mcsafe: Add write-protection-fault handling
  x86/asm/memcpy_mcsafe: Return bytes remaining
  x86/asm/memcpy_mcsafe: Add labels for __memcpy_mcsafe() write fault handling
  x86/asm/memcpy_mcsafe: Remove loop unrolling

Pull x86 debug updates from Ingo Molnar:
 "This contains the x86 oops code printing reorganization and cleanups
  from Borislav Betkov, with a particular focus in enhancing opcode
  dumping all around"

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/dumpstack: Explain the reasoning for the prologue and buffer size
  x86/dumpstack: Save first regs set for the executive summary
  x86/dumpstack: Add a show_ip() function
  x86/fault: Dump user opcode bytes on fatal faults
  x86/dumpstack: Add loglevel argument to show_opcodes()
  x86/dumpstack: Improve opcodes dumping in the code section
  x86/dumpstack: Carve out code-dumping into a function
  x86/dumpstack: Unexport oops_begin()
  x86/dumpstack: Remove code_bytes

Pull x86 cleanups from Ingo Molnar:
 "Misc cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apm: Fix spelling mistake: "caculate" -> "calculate"
  x86/mtrr: Rename main.c to mtrr.c and remove duplicate prefixes
  x86: Remove pr_fmt duplicate logging prefixes
  x86/early-quirks: Rename duplicate define of dev_err
  x86/bpf: Clean up non-standard comments, to make the code more readable

Pull x86 build updates from Ingo Molnar:
 "A handful of build system (Makefile, linker script) cleanups by
  Masahiro Yamada"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build/vdso: Put generated linker scripts to $(obj)/
  x86/build/vdso: Remove unnecessary export in Makefile
  x86/build/vdso: Remove unused $(vobjs-nox32) in Makefile
  x86/build: Remove no-op macro VMLINUX_SYMBOL()

Pull x86 asm updates from Ingo Molnar:

 - better support (non-atomic) 64-bit readq()/writeq() variants (Andy
   Shevchenko)

 - __clear_user() micro-optimization (Alexey Dobriyan)

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/io: Define readq()/writeq() to use 64-bit type
  x86/asm/64: Micro-optimize __clear_user() - Use immediate constants

Pull x86 boot updates from Ingo Molnar:

 - Centaur CPU updates (David Wang)

 - AMD and other CPU topology enumeration improvements and fixes
   (Borislav Petkov, Thomas Gleixner, Suravee Suthikulpanit)

 - Continued 5-level paging work (Kirill A. Shutemov)

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Mark __pgtable_l5_enabled __initdata
  x86/mm: Mark p4d_offset() __always_inline
  x86/mm: Introduce the 'no5lvl' kernel parameter
  x86/mm: Stop pretending pgtable_l5_enabled is a variable
  x86/mm: Unify pgtable_l5_enabled usage in early boot code
  x86/boot/compressed/64: Fix trampoline page table address calculation
  x86/CPU: Move x86_cpuinfo::x86_max_cores assignment to detect_num_cpu_cores()
  x86/Centaur: Report correct CPU/cache topology
  x86/CPU: Move cpu_detect_cache_sizes() into init_intel_cacheinfo()
  x86/CPU: Make intel_num_cpu_cores() generic
  x86/CPU: Move cpu local function declarations to local header
  x86/CPU/AMD: Derive CPU topology from CPUID function 0xB when available
  x86/CPU: Modify detect_extended_topology() to return result
  x86/CPU/AMD: Calculate last level cache ID from number of sharing threads
  x86/CPU: Rename intel_cacheinfo.c to cacheinfo.c
  perf/events/amd/uncore: Fix amd_uncore_llc ID to use pre-defined cpu_llc_id
  x86/CPU/AMD: Have smp_num_siblings and cpu_llc_id always be present
  x86/Centaur: Initialize supported CPU features properly

Pull scheduler updates from Ingo Molnar:

 - power-aware scheduling improvements (Patrick Bellasi)

 - NUMA balancing improvements (Mel Gorman)

 - vCPU scheduling fixes (Rohit Jain)

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Update util_est before updating schedutil
  sched/cpufreq: Modify aggregate utilization to always include blocked FAIR utilization
  sched/deadline/Documentation: Add overrun signal and GRUB-PA documentation
  sched/core: Distinguish between idle_cpu() calls based on desired effect, introduce available_idle_cpu()
  sched/wait: Include <linux/wait.h> in <linux/swait.h>
  sched/numa: Stagger NUMA balancing scan periods for new threads
  sched/core: Don't schedule threads on pre-empted vCPUs
  sched/fair: Avoid calling sync_entity_load_avg() unnecessarily
  sched/fair: Rearrange select_task_rq_fair() to optimize it

Pull perf updates from Ingo Molnar:
 "Kernel side changes:

   - x86 Intel uncore driver cleanups and enhancements (Kan Liang)

   - group scheduling and other fixes (Song Liu

   - store frame pointer in the sample traces for better profiling
     (Alexey Budankov)

   - compat fixes/enhancements (Eugene Syromiatnikov)

  Tooling side changes, which you can build and install in a single step
  via:

      make -C tools/perf clean install

  perf annotate:

   - Support 'perf annotate --group' for non-explicit recorded event
     "groups", showing multiple columns, one for each event, just like
     when dealing with explicit event groups (those enclosed with {})
     (Jin Yao)

   - Record min/max LBR cycles (>= Skylake) and add 'perf annotate' TUI
     hotkey to show it (c) (Jin Yao)

  perf bpf:

   - Add infrastructure to help in writing eBPF C programs to be used
     with '-e name.c' type events in tools such as 'record' and 'trace',
     with headers for common constructs and an examples directory that
     will get populated as we add more such helpers and the 'perf bpf'
     (Arnaldo Carvalho de Melo)

  perf stat:

   - Display time in precision based on std deviation (Jiri Olsa)

   - Add --table option to display time of each run (Jiri Olsa)

   - Display length strings of each run for --table option (Jiri Olsa)

  perf buildid-cache:

   - Add --list and --purge-all options (Ravi Bangoria)

  perf test:

   - Let 'perf test list' display subtests (Hendrik Brueckner)

  perf pti:

   - Create extra kernel maps to help in decoding samples in x86 PTI
     entry trampolines (Adrian Hunter)

   - Copy x86 PTI entry trampoline sections in the kcore copy used for
     annotation and intel_pt CPU traces decoding (Adrian Hunter)

  ... and a lot of other fixes, enhancements and cleanups I did not
  list, see the shortlog and git log for details"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
  perf/x86/intel/uncore: Clean up client IMC uncore
  perf/x86/intel/uncore: Expose uncore_pmu_event*() functions
  perf/x86/intel/uncore: Support IIO free-running counters on SKX
  perf/x86/intel/uncore: Add infrastructure for free running counters
  perf/x86/intel/uncore: Add new data structures for free running counters
  perf/x86/intel/uncore: Correct fixed counter index check in generic code
  perf/x86/intel/uncore: Correct fixed counter index check for NHM
  perf/x86/intel/uncore: Introduce customized event_read() for client IMC uncore
  perf/x86: Store user space frame-pointer value on a sample
  perf/core: Wire up compat PERF_EVENT_IOC_QUERY_BPF, PERF_EVENT_IOC_MODIFY_ATTRIBUTES
  perf/core: Fix bad use of igrab()
  perf/core: Fix group scheduling with mixed hw and sw events
  perf kcore_copy: Amend the offset of sections that remap kernel text
  perf kcore_copy: Copy x86 PTI entry trampoline sections
  perf kcore_copy: Get rid of kernel_map
  perf kcore_copy: Iterate phdrs
  perf kcore_copy: Layout sections
  perf kcore_copy: Calculate offset from phnum
  perf kcore_copy: Keep a count of phdrs
  perf kcore_copy: Keep phdr data in a list
  ...

Pull perf tooling fixes from Ingo Molnar:
 "Leftover perf tooling fixes from the v4.17 cycle: they sync up updated
  ABI headers with their tooling versions"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools intel-pt-decoder: Update insn.h from the kernel sources
  tools headers: Sync x86 cpufeatures.h with the kernel sources
  tools headers: Synchronize prctl.h ABI header
  perf trace beauty prctl: Default header_dir to cwd to work without parms

Pull locking updates from Ingo Molnar:

 - Lots of tidying up changes all across the map for Linux's formal
   memory/locking-model tooling, by Alan Stern, Akira Yokosawa, Andrea
   Parri, Paul E. McKenney and SeongJae Park.

   Notable changes beyond an overall update in the tooling itself is the
   tidying up of spin_is_locked() semantics, which spills over into the
   kernel proper as well.

 - qspinlock improvements: the locking algorithm now guarantees forward
   progress whereas the previous implementation in mainline could starve
   threads indefinitely in cmpxchg() loops. Also other related cleanups
   to the qspinlock code (Will Deacon)

 - misc smaller improvements, cleanups and fixes all across the locking
   subsystem

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
  locking/rwsem: Simplify the is-owner-spinnable checks
  tools/memory-model: Add reference for 'Simplifying ARM concurrency'
  tools/memory-model: Update ASPLOS information
  MAINTAINERS, tools/memory-model: Update e-mail address for Andrea Parri
  tools/memory-model: Fix coding style in 'lock.cat'
  tools/memory-model: Remove out-of-date comments and code from lock.cat
  tools/memory-model: Improve mixed-access checking in lock.cat
  tools/memory-model: Improve comments in lock.cat
  tools/memory-model: Remove duplicated code from lock.cat
  tools/memory-model: Flag "cumulativity" and "propagation" tests
  tools/memory-model: Add model support for spin_is_locked()
  tools/memory-model: Add scripts to test memory model
  tools/memory-model: Fix coding style in 'linux-kernel.def'
  tools/memory-model: Model 'smp_store_mb()'
  tools/memory-order: Update the cheat-sheet to show that smp_mb__after_atomic() orders later RMW operations
  tools/memory-order: Improve key for SELF and SV
  tools/memory-model: Fix cheat sheet typo
  tools/memory-model: Update required version of herdtools7
  tools/memory-model: Redefine rb in terms of rcu-fence
  tools/memory-model: Rename link and rcu-path to rcu-link and rb
  ...

Pull EFI updates from Ingo Molnar:

 - decode x86 CPER data (Yazen Ghannam)

 - ignore unrealistically large option ROMs (Hans de Goede)

 - initialize UEFI secure boot state during Xen dom0 boot (Daniel Kiper)

 - additional minor tweaks and fixes.

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/capsule-loader: Don't output reset log when reset flags are not set
  efi/x86: Ignore unrealistically large option ROMs
  efi/x86: Fold __setup_efi_pci32() and __setup_efi_pci64() into one function
  efi: Align efi_pci_io_protocol typedefs to type naming convention
  efi/libstub/tpm: Make function efi_retrieve_tpm2_eventlog_1_2() static
  efi: Decode IA32/X64 Context Info structure
  efi: Decode IA32/X64 MS Check structure
  efi: Decode additional IA32/X64 Bus Check fields
  efi: Decode IA32/X64 Cache, TLB, and Bus Check structures
  efi: Decode UEFI-defined IA32/X64 Error Structure GUIDs
  efi: Decode IA32/X64 Processor Error Info Structure
  efi: Decode IA32/X64 Processor Error Section
  efi: Fix IA32/X64 Processor Error Record definition
  efi/cper: Remove the INDENT_SP silliness
  x86/xen/efi: Initialize UEFI secure boot state during dom0 boot

Pull RCU updates from Ingo Molnar:

 - updates to the handling of expedited grace periods

 - updates to reduce lock contention in the rcu_node combining tree

   [ These are in preparation for the consolidation of RCU-bh,
     RCU-preempt, and RCU-sched into a single flavor, which was
     requested by Linus in response to a security flaw whose root cause
     included confusion between the multiple flavors of RCU ]

 - torture-test updates that save their users some time and effort

 - miscellaneous fixes

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  rcu/x86: Provide early rcu_cpu_starting() callback
  torture: Make kvm-find-errors.sh find build warnings
  rcutorture: Abbreviate kvm.sh summary lines
  rcutorture: Print end-of-test state in kvm.sh summary
  rcutorture: Print end-of-test state
  torture: Fold parse-torture.sh into parse-console.sh
  torture: Add a script to edit output from failed runs
  rcu: Update list of rcu_future_grace_period() trace events
  rcu: Drop early GP request check from rcu_gp_kthread()
  rcu: Simplify and inline cpu_needs_another_gp()
  rcu: The rcu_gp_cleanup() function does not need cpu_needs_another_gp()
  rcu: Make rcu_start_this_gp() check for out-of-range requests
  rcu: Add funnel locking to rcu_start_this_gp()
  rcu: Make rcu_start_future_gp() caller select grace period
  rcu: Inline rcu_start_gp_advanced() into rcu_start_future_gp()
  rcu: Clear request other than RCU_GP_FLAG_INIT at GP end
  rcu: Cleanup, don't put ->completed into an int
  rcu: Switch __rcu_process_callbacks() to rcu_accelerate_cbs()
  rcu: Avoid __call_rcu_core() root rcu_node ->lock acquisition
  rcu: Make rcu_migrate_callbacks wake GP kthread when needed
  ...

Pull m68k updates from Geert Uytterhoeven:

 - a few time-related fixes:
     - off-by-one calendar month on some classes of machines
     - Y2038 preparation

 - build fix for ndelay() being called with a 64-bit type

 - revive 64-bit get_user(), which is used by some Android code

 - defconfig updates

 - fix for a long-standing fatal bug in iounmap() on '020/030, which was
   actually fixed in 2.4.23, but never in 2.5.x and later

 - default DMA mask to avoid warning splats

 - minor fixes and cleanups

* tag 'm68k-for-v4.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Set default dma mask for platform devices
  m68k/mm: Adjust VM area to be unmapped by gap size for __iounmap()
  m68k/defconfig: Update defconfigs for v4.17-rc3
  m68k/uaccess: Revive 64-bit get_user()
  m68k: Implement ndelay() as an inline function to force type checking/casting
  zorro: Add a blank line after declarations
  m68k: Use read_persistent_clock64() consistently
  m68k: Fix off-by-one calendar month
  m68k: Fix style, spelling, and grammar in siginfo_build_tests()
  m68k/mac: Fix SWIM memory resource end address

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull siginfo updates from Eric Biederman:
 "This set of changes close the known issues with setting si_code to an
  invalid value, and with not fully initializing struct siginfo. There
  remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64
  and x86 to get the code that generates siginfo into a simpler and more
  maintainable state. Most of that work involves refactoring the signal
  handling code and thus careful code review.

  Also not included is the work to shrink the in kernel version of
  struct siginfo. That depends on getting the number of places that
  directly manipulate struct siginfo under control, as it requires the
  introduction of struct kernel_siginfo for the in kernel things.

  Overall this set of changes looks like it is making good progress, and
  with a little luck I will be wrapping up the siginfo work next
  development cycle"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
  signal/sh: Stop gcc warning about an impossible case in do_divide_error
  signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions
  signal/um: More carefully relay signals in relay_signal.
  signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR}
  signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code
  signal/signalfd: Add support for SIGSYS
  signal/signalfd: Remove __put_user from signalfd_copyinfo
  signal/xtensa: Use force_sig_fault where appropriate
  signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
  signal/um: Use force_sig_fault where appropriate
  signal/sparc: Use force_sig_fault where appropriate
  signal/sparc: Use send_sig_fault where appropriate
  signal/sh: Use force_sig_fault where appropriate
  signal/s390: Use force_sig_fault where appropriate
  signal/riscv: Replace do_trap_siginfo with force_sig_fault
  signal/riscv: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_mceerr where appropriate
  signal/openrisc: Use force_sig_fault where appropriate
  signal/nios2: Use force_sig_fault where appropriate
  ...

Merge branch 'userns-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull userns updates from Eric Biederman:
 "This is the last couple of vfs bits to enable root in a user namespace
  to mount and manipulate a filesystem with backing store (AKA not a
  virtual filesystem like proc, but a filesystem where the unprivileged
  user controls the content). The target filesystem for this work is
  fuse, and Miklos should be sending you the pull request for the fuse
  bits this merge window.

  The two key patches are "evm: Don't update hmacs in user ns mounts"
  and "vfs: Don't allow changing the link count of an inode with an
  invalid uid or gid". Those close small gaps in the vfs that would be a
  problem if an unprivileged fuse filesystem is mounted.

  The rest of the changes are things that are now safe to allow a root
  user in a user namespace to do with a filesystem they have mounted.
  The most interesting development is that remount is now safe"

* 'userns-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  fs: Allow CAP_SYS_ADMIN in s_user_ns to freeze and thaw filesystems
  capabilities: Allow privileged user in s_user_ns to set security.* xattrs
  fs: Allow superblock owner to access do_remount_sb()
  fs: Allow superblock owner to replace invalid owners of inodes
  vfs: Allow userns root to call mknod on owned filesystems.
  vfs: Don't allow changing the link count of an inode with an invalid uid or gid
  evm: Don't update hmacs in user ns mounts

Pull cifs updates from Steve French:

 - smb3 fixes for stable

 - addition of ftrace hooks for cifs.ko

 - improvements in compounding and smbdirect (rdma)

* tag '4.18-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (38 commits)
  CIFS: Add support for direct pages in wdata
  CIFS: Use offset when reading pages
  CIFS: Add support for direct pages in rdata
  cifs: update multiplex loop to handle compounded responses
  cifs: remove header_preamble_size where it is always 0
  cifs: remove struct smb2_hdr
  CIFS: 511c54a2 adds a check for session expiry, status STATUS_NETWORK_SESSION_EXPIRED, however the server can also respond with STATUS_USER_SESSION_DELETED in cases where the session has been idle for some time and the server reaps the session to recover resources.
  cifs: change smb2_get_data_area_len to take a smb2_sync_hdr as argument
  cifs: update smb2_calc_size to use smb2_sync_hdr instead of smb2_hdr
  cifs: remove struct smb2_oplock_break_rsp
  cifs: remove rfc1002 header from all SMB2 response structures
  smb3: on reconnect set PreviousSessionId field
  smb3: Add posix create context for smb3.11 posix mounts
  smb3: add tracepoints for smb2/smb3 open
  cifs: add debug output to show nocase mount option
  smb3: add define for id for posix create context and corresponding struct
  cifs: update smb2_check_message to handle PDUs without a 4 byte length header
  smb3: allow "posix" mount option to enable new SMB311 protocol extensions
  smb3: add support for posix negotiate context
  cifs: allow disabling less secure legacy dialects
  ...

Pull gfs2 updates from Bob Peterson:
 "We've got nine more patches for this merge window.

   - remove sd_jheightsize to greatly simplify some code (Andreas
     Gruenbacher)

   - fix some comments (Andreas)

   - fix a glock recursion bug when allocation errors occur (Andreas)

   - improve the hole_size function so it returns the entire hole rather
     than figuring it out piecemeal (Andreas)

   - clean up gfs2_stuffed_write_end to remove a lot of redundancy
     (Andreas)

   - clarify code with regard to the way ordered writes are processed
     (Andreas)

   - a bunch of improvements and cleanups of the iomap code to pave the
     way for iomap writes, which is a future patch set (Andreas)

   - fix a bug where block reservations can run off the end of a bitmap
     (Bob Peterson)

   - add Andreas to the MAINTAINERS file (Bob Peterson)"

* tag 'gfs2-4.18.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  MAINTAINERS: Add Andreas Gruenbacher as a maintainer for gfs2
  gfs2: Iomap cleanups and improvements
  gfs2: Remove ordered write mode handling from gfs2_trans_add_data
  gfs2: gfs2_stuffed_write_end cleanup
  gfs2: hole_size improvement
  GFS2: gfs2_free_extlen can return an extent that is too long
  GFS2: Fix allocation error bug with recursive rgrp glocking
  gfs2: Update find_metapath comment
  gfs2: Remove sdp->sd_jheightsize

Pull dlm updates from David Teigland:
 "These three commits fix and clean up the flags dlm was using on its
  SCTP sockets. This improves performance and fixes some bad connection
  delays"

* tag 'dlm-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: remove O_NONBLOCK flag in sctp_connect_to_sock
  dlm: make sctp_connect_to_sock() return in specified time
  dlm: fix a clerical error when set SCTP_NODELAY

Pull btrfs updates from David Sterba:
 "User visible features:

   - added support for the ioctl FS_IOC_FSGETXATTR, per-inode flags,
     successor of GET/SETFLAGS; now supports only existing flags:
     append, immutable, noatime, nodump, sync

   - 3 new unprivileged ioctls to allow users to enumerate subvolumes

   - dedupe syscall implementation does not restrict the range to 16MiB,
     though it still splits the whole range to 16MiB chunks

   - on user demand, rmdir() is able to delete an empty subvolume,
     export the capability in sysfs

   - fix inode number types in tracepoints, other cleanups

   - send: improved speed when dealing with a large removed directory,
     measurements show decrease from 2000 minutes to 2 minutes on a
     directory with 2 million entries

   - pre-commit check of superblock to detect a mysterious in-memory
     corruption

   - log message updates

  Other changes:

   - orphan inode cleanup improved, does no keep long-standing
     reservations that could lead up to early ENOSPC in some cases

   - slight improvement of handling snapshotted NOCOW files by avoiding
     some unnecessary tree searches

   - avoid OOM when dealing with many unmergeable small extents at flush
     time

   - speedup conversion of free space tree representations from/to
     bitmap/tree

   - code refactoring, deletion, cleanups:
      + delayed refs
      + delayed iput
      + redundant argument removals
      + memory barrier cleanups
      + remove a redundant mutex supposedly excluding several ioctls to
        run in parallel

   - new tracepoints for blockgroup manipulation

   - more sanity checks of compressed headers"

* tag 'for-4.18-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (183 commits)
  btrfs: Add unprivileged version of ino_lookup ioctl
  btrfs: Add unprivileged ioctl which returns subvolume's ROOT_REF
  btrfs: Add unprivileged ioctl which returns subvolume information
  Btrfs: clean up error handling in btrfs_truncate()
  btrfs: Factor out write portion of btrfs_get_blocks_direct
  btrfs: Factor out read portion of btrfs_get_blocks_direct
  btrfs: return ENOMEM if path allocation fails in btrfs_cross_ref_exist
  btrfs: raid56: Remove VLA usage
  btrfs: return error value if create_io_em failed in cow_file_range
  btrfs: drop useless member qgroup_reserved of btrfs_pending_snapshot
  btrfs: drop unused parameter qgroup_reserved
  btrfs: balance dirty metadata pages in btrfs_finish_ordered_io
  btrfs: lift some btrfs_cross_ref_exist checks in nocow path
  btrfs: Remove fs_info argument from btrfs_uuid_tree_rem
  btrfs: Remove fs_info argument from btrfs_uuid_tree_add
  Btrfs: remove unused check of skip_locking
  Btrfs: remove always true check in unlock_up
  Btrfs: grab write lock directly if write_lock_level is the max level
  Btrfs: move get root out of btrfs_search_slot to a helper
  Btrfs: use more straightforward extent_buffer_uptodate check
  ...

Pull affs fix from David Sterba:
 "A potential memory leak fix for AFFS"

* tag 'affs-for-4.18-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  affs: fix potential memory leak when parsing option 'prefix'

Pull aio updates from Al Viro:
 "Majority of AIO stuff this cycle. aio-fsync and aio-poll, mostly.

  The only thing I'm holding back for a day or so is Adam's aio ioprio -
  his last-minute fixup is trivial (missing stub in !CONFIG_BLOCK case),
  but let it sit in -next for decency sake..."

* 'work.aio-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  aio: sanitize the limit checking in io_submit(2)
  aio: fold do_io_submit() into callers
  aio: shift copyin of iocb into io_submit_one()
  aio_read_events_ring(): make a bit more readable
  aio: all callers of aio_{read,write,fsync,poll} treat 0 and -EIOCBQUEUED the same way
  aio: take list removal to (some) callers of aio_complete()
  aio: add missing break for the IOCB_CMD_FDSYNC case
  random: convert to ->poll_mask
  timerfd: convert to ->poll_mask
  eventfd: switch to ->poll_mask
  pipe: convert to ->poll_mask
  crypto: af_alg: convert to ->poll_mask
  net/rxrpc: convert to ->poll_mask
  net/iucv: convert to ->poll_mask
  net/phonet: convert to ->poll_mask
  net/nfc: convert to ->poll_mask
  net/caif: convert to ->poll_mask
  net/bluetooth: convert to ->poll_mask
  net/sctp: convert to ->poll_mask
  net/tipc: convert to ->poll_mask
  ...

Pull dcache lookup cleanups from Al Viro:
 "Cleaning ->lookup() instances up - mostly d_splice_alias() conversions"

* 'work.lookup' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (29 commits)
  switch the rest of procfs lookups to d_splice_alias()
  procfs: switch instantiate_t to d_splice_alias()
  don't bother with tid_fd_revalidate() in lookups
  proc_lookupfd_common(): don't bother with instantiate unless the file is open
  procfs: get rid of ancient BS in pid_revalidate() uses
  cifs_lookup(): switch to d_splice_alias()
  cifs_lookup(): cifs_get_inode_...() never returns 0 with *inode left NULL
  9p: unify paths in v9fs_vfs_lookup()
  ncp_lookup(): use d_splice_alias()
  hfsplus: switch to d_splice_alias()
  hfs: don't allow mounting over .../rsrc
  hfs: use d_splice_alias()
  omfs_lookup(): report IO errors, use d_splice_alias()
  orangefs_lookup: simplify
  openpromfs: switch to d_splice_alias()
  xfs_vn_lookup: simplify a bit
  adfs_lookup: do not fail with ENOENT on negatives, use d_splice_alias()
  adfs_lookup_byname: .. *is* taken care of in fs/namei.c
  romfs_lookup: switch to d_splice_alias()
  qnx6_lookup: switch to d_splice_alias()
  ...