- 20 Jan, 2020 40 commits
-
-
Qu Wenruo authored
ROOT_ITEM key check itself is not as simple as single line check, and will be reused for both ROOT_ITEM and DIR_ITEM/DIR_INDEX location key check, so refactor such check into check_root_key(). Also since we are here, fix a comment error about ROOT_ITEM offset, which is transid of snapshot creation, not some "older kernel behavior". Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Qu Wenruo authored
Inode key check is not as easy as several lines, and it will be called in more than one location (INODE_ITEM check and DIR_ITEM/DIR_INDEX/XATTR_ITEM location key check). So here refactor such check into check_inode_key(). And add extra checks for XATTR_ITEM. Reviewed-by:
-
Qu Wenruo authored
The @fs_info parameter can be extracted from extent_buffer structure, and there are already some wrappers getting rid of the @fs_info parameter. Reviewed-by:
-
Qu Wenruo authored
Inspired by btrfs-progs github issue #208, where chunk item in chunk tree has invalid num_stripes (0). Although that can already be caught by current btrfs_check_chunk_valid(), that function doesn't really check item size as it needs to handle chunk item in super block sys_chunk_array(). This patch will add two extra checks for chunk items in chunk tree: - Basic chunk item size If the item is smaller than btrfs_chunk (which already contains one stripe), exit right now as reading num_stripes may even go beyond eb boundary. - Item size check against num_stripes If item size doesn't match with calculated chunk size, then either the item size or the num_stripes is corrupted. Error out anyway. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
zhengbin authored
Fixes coccicheck warning: fs/btrfs/print-tree.c:320:3-4: Unneeded semicolon Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
-
Omar Sandoval authored
This hasn't been used since it was first introduced in commit b4bd745d ("btrfs: Introduce find_free_extent_ctl structure for later rework"). Passing that to btrfs_add_reserved_bytes in find_free_extent is not strictly necessary and using the local ram_bytes instead seems cleaner. Signed-off-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
-
Omar Sandoval authored
Commit 7087a9d8 ("btrfs: Remove extent_io_ops::writepage_end_io_hook") left this logic in a confusing state. Simplify it. Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Omar Sandoval authored
We only pass this as 1 from __extent_writepage_io(). The parameter basically means "pretend I didn't pass in a page". This is silly since we can simply not pass in the page. Get rid of the parameter from btrfs_get_extent(), and since it's used as a get_extent_t callback, remove it from get_extent_t and btree_get_extent(), neither of which need it. While we're here, let's document btrfs_get_extent(). Signed-off-by:
-
Omar Sandoval authored
In __extent_writepage_io(), we check whether i_size <= page_offset(page). Note that if i_size < page_offset(page), then i_size >> PAGE_SHIFT < page->index. If i_size == page_offset(page), then i_size >> PAGE_SHIFT == page->index && offset_in_page(i_size) == 0. __extent_writepage() already has a check for these cases that returns without calling __extent_writepage_io(): end_index = i_size >> PAGE_SHIFT pg_offset = offset_in_page(i_size); if (page->index > end_index || (page->index == end_index && !pg_offset)) { page->mapping->a_ops->invalidatepage(page, 0, PAGE_SIZE); unlock_page(page); return 0; } Get rid of the one in __extent_writepage_io(), which was obsoleted in 211c17f5 ("Fix corners in writepage and btrfs_truncate_page"). Signed-off-by: -
Omar Sandoval authored
Since 40f76580 ("Btrfs: split up __extent_writepage to lower stack usage"), done_unlocked is simply a return 0. Get rid of it. Mid-statement block returns don seem to make the code less readable here. Reviewed-by:
-
Omar Sandoval authored
We're initializing pg_offset to 0, setting it immediately, then reassigning it to 0 again after. The former became unnecessary in 211c17f5 ("Fix corners in writepage and btrfs_truncate_page"). The latter is a leftover that should've been removed in 40f76580 ("Btrfs: split up __extent_writepage to lower stack usage"). Remove both. Reviewed-by:
-
Omar Sandoval authored
ordered->start, ordered->len, and ordered->disk_len correspond to fi->disk_bytenr, fi->num_bytes, and fi->disk_num_bytes, respectively. It's confusing to translate between the two naming schemes. Since a btrfs_ordered_extent is basically a pending btrfs_file_extent_item, let's make the former use the naming from the latter. Note that I didn't touch the names in tracepoints just in case there are scripts depending on the current naming. Reviewed-by:
-
Omar Sandoval authored
Snapshot-aware defrag has been disabled since commit 8101c8db ("Btrfs: disable snapshot aware defrag for now") almost 6 years ago. Let's remove the dead code. If someone is up to the task of bringing it back, they can dig it up from git. This is logically a revert of commit 38c227d8 ("Btrfs: snapshot-aware defrag") except that now we have to clear the EXTENT_DEFRAG bit to avoid need_force_cow() returning true forever. The reasons to disable were caused by runtime problems (like long stalls or memory consumption) on heavily referenced extents (eg. thousands of snapshots). There were attempts to fix that but never finished. Current defrag breaks the extent references and some users prefer that behaviour over the one implemented by snapshot aware (ie. keeping links for defragmentation). To enable both usecases we'd need to extend defrag ioctl but let's do that properly from scratch. Reviewed-by:
-
Omar Sandoval authored
We can encode this in the offset parameter: -1 means use the page offsets, anything else is a valid offset. Signed-off-by:
-
Omar Sandoval authored
Currently, we have two wrappers for __btrfs_lookup_bio_sums(): btrfs_lookup_bio_sums_dio(), which is used for direct I/O, and btrfs_lookup_bio_sums(), which is used everywhere else. The only difference is that the _dio variant looks up csums starting at the given offset instead of using the page index, which isn't actually direct I/O-specific. Let's clean up the signature and return value of __btrfs_lookup_bio_sums(), rename it to btrfs_lookup_bio_sums(), and get rid of the trivial helpers. Reviewed-by:
-
Johannes Thumshirn authored
When closing a device, btrfs_close_one_device() first allocates a new device, copies the device to close's name, replaces it in the dev_list with the copy and then finally frees it. This involves two memory allocation, which can potentially fail. As this code path is tricky to unwind, the allocation failures where handled by BUG_ON()s. But this copying isn't strictly needed, all that is needed is resetting the device in question to it's state it had after the allocation. Signed-off-by:
-
Johannes Thumshirn authored
In btrfs_close_one_device we're decrementing the number of open devices before we're calling btrfs_close_bdev(). As there is no intermediate exit between these points in this function it is technically OK to do so, but it makes the code a bit harder to understand. Move both operations closer together and move the decrement step after btrfs_close_bdev(). Reviewed-by:
-
Omar Sandoval authored
When you snapshot a subvolume containing a subvolume, you get a placeholder directory where the subvolume would be. These directories have their own btrfs_dir_ro_inode_operations. Al pointed out [1] that these directories can use simple_lookup() instead of btrfs_lookup(), as they are always empty. Furthermore, they can use the default generic_permission() instead of btrfs_permission(); the additional checks in the latter don't matter because we can't write to the directory anyways. Finally, they can use the default generic_update_time() instead of btrfs_update_time(), as the inode doesn't exist on disk and doesn't need any special handling. All together, this means that we can get rid of btrfs_dir_ro_inode_operations and use simple_dir_inode_operations instead. 1: https://lore.kernel.org/linux-btrfs/20190929052934.GY26530@ZenIV.linux.org.uk/ Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by:
-
Johannes Thumshirn authored
We have a user report, that cppcheck is complaining about a possible NULL-pointer dereference in btrfs_destroy_dev_replace_tgtdev(). We're first dereferencing the 'tgtdev' variable and the later check for the validity of the pointer with a WARN_ON(!tgtdev); But all callers of btrfs_destroy_dev_replace_tgtdev() either explicitly check if 'tgtdev' is non-NULL or directly allocate 'tgtdev', so the WARN_ON() is impossible to hit. Just remove it to silence the checker's complains. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205003Signed-off-by:
Johannes Thumshirn <jth@kernel.org> Reviewed-by:
-
Johannes Thumshirn authored
btrfsic_process_superblock() BUG_ON()s if 'state' is NULL. But this can never happen as the only caller from btrfsic_process_superblock() is btrfsic_mount() which allocates 'state' some lines above calling btrfsic_process_superblock() and checks for the allocation to succeed. Let's just remove the impossible to hit BUG_ON(). Signed-off-by:
-
Johannes Thumshirn authored
A user reports a possible NULL-pointer dereference in btrfsic_process_superblock(). We are assigning state->fs_info to a local fs_info variable and afterwards checking for the presence of state. While we would BUG_ON() a NULL state anyways, we can also just remove the local fs_info copy, as fs_info is only used once as the first argument for btrfs_num_copies(). There we can just pass in state->fs_info as well. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205003Signed-off-by:
-
Josef Bacik authored
This is a relic from a time before we had a proper reservation mechanism and you could end up with really full chunks at chunk allocation time. This doesn't make sense anymore, so just kill it. Reviewed-by:
-
Josef Bacik authored
We have the space_info, we can just check its flags to see if it's the system chunk space info. Reviewed-by:
-
Nikolay Borisov authored
It's a simple wrapper over btrfs_panic and is called only once. Just open code it. Signed-off-by:
-
Qu Wenruo authored
There are two relocation stages but both print the same message. Add the description of the stage. This can help debugging or provides informative message to users. BTRFS info (device dm-5): balance: start -d -m -s BTRFS info (device dm-5): relocating block group 30408704 flags metadata|dup BTRFS info (device dm-5): found 2 extents, stage: move data extents BTRFS info (device dm-5): relocating block group 22020096 flags system|dup BTRFS info (device dm-5): found 1 extents, stage: move data extents BTRFS info (device dm-5): relocating block group 13631488 flags data BTRFS info (device dm-5): found 1 extents, stage: move data extents BTRFS info (device dm-5): found 1 extents, stage: update data pointers BTRFS info (device dm-5): balance: ended with status: 0 Signed-off-by:
-
Yunfeng Ye authored
The condition '!ret2' is always true. commit 717beb96 ("Btrfs: fix regression in btrfs_page_mkwrite() from vm_fault_t conversion") left behind the check after moving this code out of the goto, so remove the unused condition check. Reviewed-by:
Yunfeng Ye <yeyunfeng@huawei.com> Reviewed-by:
-
Nikolay Borisov authored
level <0 and level >= BTRFS_MAX_LEVEL are already performed upon extent buffer read by tree checker in btrfs_check_node. go. As far as 'level <= 0' we are guaranteed that level is '> 0' because the value of level _before_ reading 'next' is larger than 1 (otherwise we wouldn't have executed that code at all) this in turn guarantees that 'level' after btrfs_read_buffer is 'level - 1' since we verify this invariant in: btrfs_read_buffer btree_read_extent_buffer_pages btrfs_verify_level_key This guarantees that level can never be '<= 0' so the warn on is never triggered. Signed-off-by: -
Nikolay Borisov authored
The log_root passed to walk_log_tree is guaranteed to have its root_key.objectid always be BTRFS_TREE_LOG_OBJECTID. This is by merit that all log roots of an ordinary root are allocated in alloc_log_tree which hard-codes objectid to be BTRFS_TREE_LOG_OBJECTID. In case walk_log_tree is called for a log tree found by btrfs_read_fs_root in btrfs_recover_log_trees, that function already ensures found_key.objectid is BTRFS_TREE_LOG_OBJECTID. No functional changes. Signed-off-by:
-
Nikolay Borisov authored
__btrfs_free_reserved_extent now performs the actions of btrfs_free_and_pin_reserved_extent. But this name is a bit of a misnomer, since the extent is not really freed but just pinned. Reflect this in the new name. No semantics changes. Signed-off-by:
-
Nikolay Borisov authored
__btrfs_free_reserved_extent performs 2 entirely different operations depending on whether its 'pin' argument is true or false. This patch lifts the 2nd case (pin is false) into it's sole caller btrfs_free_reserved_extent. No semantics changes. Signed-off-by:
-
Nikolay Borisov authored
All callers of btrfs_free_reserved_extent (respectively __btrfs_free_reserved_extent with in set to 0) pass in extents which have only been reserved but not yet written to. Namely, * in cow_file_range that function is called only if create_io_em fails or btrfs_add_ordered_extent fail, both of which happen _before_ any IO is submitted to the newly reserved range * in submit_compressed_extents the code flow is similar - out_free_reserve can be called only before btrfs_submit_compressed_write which is where any writes to the range could occur * btrfs_new_extent_direct also calls btrfs_free_reserved_extent only if extent_map fails, before any IO is issued * __btrfs_prealloc_file_range also calls btrfs_free_reserved_extent in case insertion of the metadata fails * btrfs_alloc_tree_block again can only be called in case in-memory operations fail, before any IO is submitted * btrfs_finish_ordered_io - this is the only caller where discarding the extent could have a material effect, since it can be called for an extent which was partially written. With this change the submission of discards is optimised since discards are now not being created for extents which are known to not have been touched on disk. Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Marcos Paulo de Souza authored
[PROBLEM] qgroup create/remove code is currently returning EINVAL when the user tries to create a qgroup on a subvolume without quota enabled. EINVAL is already being used for too many error scenarios so that is hard to depict what is the problem. [FIX] Currently scrub and balance code return -ENOTCONN when the user tries to cancel/pause and no scrub or balance is currently running for the desired subvolume. Do the same here by returning -ENOTCONN when a user tries to create/delete/assing/list a qgroup on a subvolume without quota enabled. Reviewed-by:
Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by:
-
Marcos Paulo de Souza authored
Remove some variables that are set only to be checked later, and never used. Reviewed-by:
-
Anand Jain authored
Merge btrfs_sysfs_add_fsid() and btrfs_sysfs_add_devices_kobj() functions as these two are small and they are called one after the other. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Anand Jain authored
btrfs_sysfs_add_device() creates the directory /sys/fs/btrfs/UUID/devices but its function name is misleading. Rename it to btrfs_sysfs_add_devices_kobj() instead. No functional changes. Signed-off-by:
-
Anand Jain authored
Commit 24bd69cb ("Btrfs: sysfs: add support to add parent for fsid") added parent argument in preparation to show the seed fsid under the sprout fsid as in the patch [1] in the mailing list. [1] Btrfs: sysfs: support seed devices in the sysfs layout But later this idea was superseded by another idea to rename the fsid as in the commit f93c3997 ("btrfs: factor out sysfs code for updating sprout fsid"). So we don't need parent argument anymore. Signed-off-by:
-
Anand Jain authored
The struct member btrfs_device::device_dir_kobj holds the kobj of the sysfs directory /sys/fs/btrfs/UUID/devices, so rename it from device_dir_kobj to devices_kobj. No functional changes. Signed-off-by:
-
David Sterba authored
Make the number of copies explicit even for entries that use the default 0 value for consistency. Signed-off-by: -
David Sterba authored
The table is already used for ncopies, replace open coding of stripes with the raid_attr value. Signed-off-by: -
Filipe Manana authored
When using the NO_HOLES feature, if we punch a hole into a file and then fsync it, there are cases where a subsequent fsync will miss the fact that a hole was punched, resulting in the holes not existing after replaying the log tree. Essentially these cases all imply that, tree-log.c:copy_items(), is not invoked for the leafs that delimit holes, because nothing changed those leafs in the current transaction. And it's precisely copy_items() where we currenly detect and log holes, which works as long as the holes are between file extent items in the input leaf or between the beginning of input leaf and the previous leaf or between the last item in the leaf and the next leaf. First example where we miss a hole: *) The extent items of the inode span multiple leafs; *) The punched hole covers a range that affects only the extent items of the first leaf; *) The fsync operation is done in full mode (BTRFS_INODE_NEEDS_FULL_SYNC is set in the inode's runtime flags). That results in the hole not existing after replaying the log tree. For example, if the fs/subvolume tree has the following layout for a particular inode: Leaf N, generation 10: [ ... INODE_ITEM INODE_REF EXTENT_ITEM (0 64K) EXTENT_ITEM (64K 128K) ] Leaf N + 1, generation 10: [ EXTENT_ITEM (128K 64K) ... ] If at transaction 11 we punch a hole coverting the range [0, 128K[, we end up dropping the two extent items from leaf N, but we don't touch the other leaf, so we end up in the following state: Leaf N, generation 11: [ ... INODE_ITEM INODE_REF ] Leaf N + 1, generation 10: [ EXTENT_ITEM (128K 64K) ... ] A full fsync after punching the hole will only process leaf N because it was modified in the current transaction, but not leaf N + 1, since it was not modified in the current transaction (generation 10 and not 11). As a result the fsync will not log any holes, because it didn't process any leaf with extent items. Second example where we will miss a hole: *) An inode as its items spanning 5 (or more) leafs; *) A hole is punched and it covers only the extents items of the 3rd leaf. This resulsts in deleting the entire leaf and not touching any of the other leafs. So the only leaf that is modified in the current transaction, when punching the hole, is the first leaf, which contains the inode item. During the full fsync, the only leaf that is passed to copy_items() is that first leaf, and that's not enough for the hole detection code in copy_items() to determine there's a hole between the last file extent item in the 2nd leaf and the first file extent item in the 3rd leaf (which was the 4th leaf before punching the hole). Fix this by scanning all leafs and punch holes as necessary when doing a full fsync (less common than a non-full fsync) when the NO_HOLES feature is enabled. The lack of explicit file extent items to mark holes makes it necessary to scan existing extents to determine if holes exist. A test case for fstests follows soon. Fixes: 16e7549f ("Btrfs: incompatible format change to remove hole extents") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
