- 05 Dec, 2019 11 commits
-
-
Julian Wiedmann authored
Depending on a packet's type, the RX path needs to access fields in the packet headers and thus requires a minimum packet length. Enforce this length when building the skb. On the other hand a single runt packet is no reason to drop the whole RX buffer. So just skip it, and continue processing on the next packet. Fixes: 4a71df50 ("qeth: new qeth device driver") Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mian Yousaf Kaukab authored
Since commit 2b3e88ea ("net: phy: improve phy state checking") phy_start_aneg() expects phy state to be >= PHY_UP. Call phy_start() before calling phy_start_aneg() during probe so that autonegotiation is initiated. As phy_start() takes care of calling phy_start_aneg(), drop the explicit call to phy_start_aneg(). Network fails without this patch on Octeon TX. Fixes: 2b3e88ea ("net: phy: improve phy state checking") Signed-off-by:
Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Taehee Yoo authored
hsr_dev_xmit() calls hsr_port_get_hsr() to find master node and that would return NULL if master node is not existing in the list. But hsr_dev_xmit() doesn't check return pointer so a NULL dereference could occur. Test commands: ip netns add nst ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link set veth1 netns nst ip link set veth3 netns nst ip link set veth0 up ip link set veth2 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec nst ip link set veth1 up ip netns exec nst ip link set veth3 up ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3 ip netns exec nst ip a a 192.168.100.2/24 dev hsr1 ip netns exec nst ip link set hsr1 up hping3 192.168.100.2 -2 --flood & modprobe -rv hsr Splat looks like: [ 217.351122][ T1635] kasan: CONFIG_KASAN_INLINE enabled [ 217.352969][ T1635] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 217.354297][ T1635] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 217.355507][ T1635] CPU: 1 PID: 1635 Comm: hping3 Not tainted 5.4.0+ #192 [ 217.356472][ T1635] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 217.357804][ T1635] RIP: 0010:hsr_dev_xmit+0x34/0x90 [hsr] [ 217.373010][ T1635] Code: 48 8d be 00 0c 00 00 be 04 00 00 00 48 83 ec 08 e8 21 be ff ff 48 8d 78 10 48 ba 00 b [ 217.376919][ T1635] RSP: 0018:ffff8880cd8af058 EFLAGS: 00010202 [ 217.377571][ T1635] RAX: 0000000000000000 RBX: ffff8880acde6840 RCX: 0000000000000002 [ 217.379465][ T1635] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: 0000000000000010 [ 217.380274][ T1635] RBP: ffff8880acde6840 R08: ffffed101b440d5d R09: 0000000000000001 [ 217.381078][ T1635] R10: 0000000000000001 R11: ffffed101b440d5c R12: ffff8880bffcc000 [ 217.382023][ T1635] R13: ffff8880bffcc088 R14: 0000000000000000 R15: ffff8880ca675c00 [ 217.383094][ T1635] FS: 00007f060d9d1740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 217.384289][ T1635] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 217.385009][ T1635] CR2: 00007faf15381dd0 CR3: 00000000d523c001 CR4: 00000000000606e0 [ 217.385940][ T1635] Call Trace: [ 217.386544][ T1635] dev_hard_start_xmit+0x160/0x740 [ 217.387114][ T1635] __dev_queue_xmit+0x1961/0x2e10 [ 217.388118][ T1635] ? check_object+0xaf/0x260 [ 217.391466][ T1635] ? __alloc_skb+0xb9/0x500 [ 217.392017][ T1635] ? init_object+0x6b/0x80 [ 217.392629][ T1635] ? netdev_core_pick_tx+0x2e0/0x2e0 [ 217.393175][ T1635] ? __alloc_skb+0xb9/0x500 [ 217.393727][ T1635] ? rcu_read_lock_sched_held+0x90/0xc0 [ 217.394331][ T1635] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 217.395013][ T1635] ? kasan_unpoison_shadow+0x30/0x40 [ 217.395668][ T1635] ? __kasan_kmalloc.constprop.4+0xa0/0xd0 [ 217.396280][ T1635] ? __kmalloc_node_track_caller+0x3a8/0x3f0 [ 217.399007][ T1635] ? __kasan_kmalloc.constprop.4+0xa0/0xd0 [ 217.400093][ T1635] ? __kmalloc_reserve.isra.46+0x2e/0xb0 [ 217.401118][ T1635] ? memset+0x1f/0x40 [ 217.402529][ T1635] ? __alloc_skb+0x317/0x500 [ 217.404915][ T1635] ? arp_xmit+0xca/0x2c0 [ ... ] Fixes: 311633b6 ("hsr: switch ->dellink() to ->ndo_uninit()") Acked-by:Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Martin Varghese authored
The skb_mpls_push was not updating ethertype of an ethernet packet if the packet was originally received from a non ARPHRD_ETHER device. In the below OVS data path flow, since the device corresponding to port 7 is an l3 device (ARPHRD_NONE) the skb_mpls_push function does not update the ethertype of the packet even though the previous push_eth action had added an ethernet header to the packet. recirc_id(0),in_port(7),eth_type(0x0800),ipv4(tos=0/0xfc,ttl=64,frag=no), actions:push_eth(src=00:00:00:00:00:00,dst=00:00:00:00:00:00), push_mpls(label=13,tc=0,ttl=64,bos=1,eth_type=0x8847),4 Fixes: 8822e270 ("net: core: move push MPLS functionality from OvS to core helper") Signed-off-by:
Martin Varghese <martin.varghese@nokia.com> Signed-off-by:
-
Alexandru Ardelean authored
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_secs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd27 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
-
Russell King authored
The referenced commit below allowed more than one hwmon device to be created per SFP, which is definitely not what we want. Avoid this by only creating the hwmon device just as we transition to WAITDEV state. Fixes: 139d3a21 ("net: sfp: allow modules with slow diagnostics to probe") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King authored
When unbinding, we don't correctly tear down the module state, leaving (for example) the hwmon registration behind. Ensure everything is properly removed by sending a remove event at unbind. Fixes: 6b0da5c9 ("net: sfp: track upstream's attachment state in state machine") Signed-off-by:
-
Shannon Nelson authored
If the user has specified their own RSS hash key, don't lose it across queue resets such as DOWN/UP, MTU change, and number of channels change. This is fixed by moving the key initialization to a little earlier in the lif creation. Also, let's clean up the RSS config a little better on the way down by setting it all to 0. Fixes: aa319881 ("ionic: Add RSS support") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Jonathan Lemon authored
A lockdep splat was observed when trying to remove an xdp memory model from the table since the mutex was obtained when trying to remove the entry, but not before the table walk started: Fix the splat by obtaining the lock before starting the table walk. Fixes: c3f812ce ("page_pool: do not release pool until inflight == 0.") Reported-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Tested-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
-
Aaron Conole authored
The act_ct TC module shares a common conntrack and NAT infrastructure exposed via netfilter. It's possible that a packet needs both SNAT and DNAT manipulation, due to e.g. tuple collision. Netfilter can support this because it runs through the NAT table twice - once on ingress and again after egress. The act_ct action doesn't have such capability. Like netfilter hook infrastructure, we should run through NAT twice to keep the symmetry. Fixes: b57dc7c1 ("net/sched: Introduce action ct") Signed-off-by:
Aaron Conole <aconole@redhat.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Aaron Conole authored
The openvswitch module shares a common conntrack and NAT infrastructure exposed via netfilter. It's possible that a packet needs both SNAT and DNAT manipulation, due to e.g. tuple collision. Netfilter can support this because it runs through the NAT table twice - once on ingress and again after egress. The openvswitch module doesn't have such capability. Like netfilter hook infrastructure, we should run through NAT twice to keep the symmetry. Fixes: 05752523 ("openvswitch: Interface with NAT.") Signed-off-by:
-
- 04 Dec, 2019 3 commits
-
-
David S. Miller authored
Sabrina Dubroca says: ==================== net: convert ipv6_stub to ip6_dst_lookup_flow Xiumei Mu reported a bug in a VXLAN over IPsec setup: IPv6 | ESP | VXLAN Using this setup, packets go out unencrypted, because VXLAN over IPv6 gets its route from ipv6_stub->ipv6_dst_lookup (in vxlan6_get_route), which doesn't perform an XFRM lookup. This patchset first makes ip6_dst_lookup_flow suitable for some existing users of ipv6_stub->ipv6_dst_lookup by adding a 'net' argument, then converts all those users. ==================== Signed-off-by: -
Sabrina Dubroca authored
ipv6_stub uses the ip6_dst_lookup function to allow other modules to perform IPv6 lookups. However, this function skips the XFRM layer entirely. All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the ip_route_output_key and ip_route_output helpers) for their IPv4 lookups, which calls xfrm_lookup_route(). This patch fixes this inconsistent behavior by switching the stub to ip6_dst_lookup_flow, which also calls xfrm_lookup_route(). This requires some changes in all the callers, as these two functions take different arguments and have different return types. Fixes: 5f81bd2e ("ipv6: export a stub for IPv6 symbols used by vxlan") Reported-by:
Xiumei Mu <xmu@redhat.com> Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Sabrina Dubroca authored
This will be used in the conversion of ipv6_stub to ip6_dst_lookup_flow, as some modules currently pass a net argument without a socket to ip6_dst_lookup. This is equivalent to commit 343d60aa ("ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argument"). Signed-off-by:
-
- 03 Dec, 2019 14 commits
-
-
Yoshiki Komachi authored
The recent commit 5c72299f ("net: sched: cls_flower: Classify packets using port ranges") had added filtering based on port ranges to tc flower. However the commit missed necessary changes in hw-offload code, so the feature gave rise to generating incorrect offloaded flow keys in NIC. One more detailed example is below: $ tc qdisc add dev eth0 ingress $ tc filter add dev eth0 ingress protocol ip flower ip_proto tcp \ dst_port 100-200 action drop With the setup above, an exact match filter with dst_port == 0 will be installed in NIC by hw-offload. IOW, the NIC will have a rule which is equivalent to the following one. $ tc qdisc add dev eth0 ingress $ tc filter add dev eth0 ingress protocol ip flower ip_proto tcp \ dst_port 0 action drop The behavior was caused by the flow dissector which extracts packet data into the flow key in the tc flower. More specifically, regardless of exact match or specified port ranges, fl_init_dissector() set the FLOW_DISSECTOR_KEY_PORTS flag in struct flow_dissector to extract port numbers from skb in skb_flow_dissect() called by fl_classify(). Note that device drivers received the same struct flow_dissector object as used in skb_flow_dissect(). Thus, offloaded drivers could not identify which of these is used because the FLOW_DISSECTOR_KEY_PORTS flag was set to struct flow_dissector in either case. This patch adds the new FLOW_DISSECTOR_KEY_PORTS_RANGE flag and the new tp_range field in struct fl_flow_key to recognize which filters are applied to offloaded drivers. At this point, when filters based on port ranges passed to drivers, drivers return the EOPNOTSUPP error because they do not support the feature (the newly created FLOW_DISSECTOR_KEY_PORTS_RANGE flag). Fixes: 5c72299f ("net: sched: cls_flower: Classify packets using port ranges") Signed-off-by:
Yoshiki Komachi <komachi.yoshiki@gmail.com> Signed-off-by:
-
Dust Li authored
sch->q.len hasn't been set if the subqueue is a NOLOCK qdisc in mq_dump() and mqprio_dump(). Fixes: ce679e8d ("net: sched: add support for TCQ_F_NOLOCK subqueues to sch_mqprio") Signed-off-by:
Dust Li <dust.li@linux.alibaba.com> Signed-off-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
-
Eric Dumazet authored
It appears linux-4.14 stable needs a backport of commit 88f8598d ("tcp: exit if nothing to retransmit on RTO timeout") Since tcp_rtx_queue_empty() is not in pre 4.15 kernels, let's refactor tcp_retransmit_timer() to only use tcp_rtx_queue_head() I will provide to stable teams the squashed patches. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Vladimir Oltean authored
Currently a switch driver deinit frees the regmaps, but the PTP clock is still out there, available to user space via /dev/ptpN. Any PTP operation is a ticking time bomb, since it will attempt to use the freed regmaps and thus trigger kernel panics: [ 4.291746] fsl_enetc 0000:00:00.2 eth1: error -22 setting up slave phy [ 4.291871] mscc_felix 0000:00:00.5: Failed to register DSA switch: -22 [ 4.308666] mscc_felix: probe of 0000:00:00.5 failed with error -22 [ 6.358270] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088 [ 6.367090] Mem abort info: [ 6.369888] ESR = 0x96000046 [ 6.369891] EC = 0x25: DABT (current EL), IL = 32 bits [ 6.369892] SET = 0, FnV = 0 [ 6.369894] EA = 0, S1PTW = 0 [ 6.369895] Data abort info: [ 6.369897] ISV = 0, ISS = 0x00000046 [ 6.369899] CM = 0, WnR = 1 [ 6.369902] user pgtable: 4k pages, 48-bit VAs, pgdp=00000020d58c7000 [ 6.369904] [0000000000000088] pgd=00000020d5912003, pud=00000020d5915003, pmd=0000000000000000 [ 6.369914] Internal error: Oops: 96000046 [#1] PREEMPT SMP [ 6.420443] Modules linked in: [ 6.423506] CPU: 1 PID: 262 Comm: phc_ctl Not tainted 5.4.0-03625-gb7b2a5dadd7f #204 [ 6.431273] Hardware name: LS1028A RDB Board (DT) [ 6.435989] pstate: 40000085 (nZcv daIf -PAN -UAO) [ 6.440802] pc : css_release+0x24/0x58 [ 6.444561] lr : regmap_read+0x40/0x78 [ 6.448316] sp : ffff800010513cc0 [ 6.451636] x29: ffff800010513cc0 x28: ffff002055873040 [ 6.456963] x27: 0000000000000000 x26: 0000000000000000 [ 6.462289] x25: 0000000000000000 x24: 0000000000000000 [ 6.467617] x23: 0000000000000000 x22: 0000000000000080 [ 6.472944] x21: ffff800010513d44 x20: 0000000000000080 [ 6.478270] x19: 0000000000000000 x18: 0000000000000000 [ 6.483596] x17: 0000000000000000 x16: 0000000000000000 [ 6.488921] x15: 0000000000000000 x14: 0000000000000000 [ 6.494247] x13: 0000000000000000 x12: 0000000000000000 [ 6.499573] x11: 0000000000000000 x10: 0000000000000000 [ 6.504899] x9 : 0000000000000000 x8 : 0000000000000000 [ 6.510225] x7 : 0000000000000000 x6 : ffff800010513cf0 [ 6.515550] x5 : 0000000000000000 x4 : 0000000fffffffe0 [ 6.520876] x3 : 0000000000000088 x2 : ffff800010513d44 [ 6.526202] x1 : ffffcada668ea000 x0 : ffffcada64d8b0c0 [ 6.531528] Call trace: [ 6.533977] css_release+0x24/0x58 [ 6.537385] regmap_read+0x40/0x78 [ 6.540795] __ocelot_read_ix+0x6c/0xa0 [ 6.544641] ocelot_ptp_gettime64+0x4c/0x110 [ 6.548921] ptp_clock_gettime+0x4c/0x58 [ 6.552853] pc_clock_gettime+0x5c/0xa8 [ 6.556699] __arm64_sys_clock_gettime+0x68/0xc8 [ 6.561331] el0_svc_common.constprop.2+0x7c/0x178 [ 6.566133] el0_svc_handler+0x34/0xa0 [ 6.569891] el0_sync_handler+0x114/0x1d0 [ 6.573908] el0_sync+0x140/0x180 [ 6.577232] Code: d503201f b00119a1 91022263 b27b7be4 (f9004663) [ 6.583349] ---[ end trace d196b9b14cdae2da ]--- [ 6.587977] Kernel panic - not syncing: Fatal exception [ 6.593216] SMP: stopping secondary CPUs [ 6.597151] Kernel Offset: 0x4ada54400000 from 0xffff800010000000 [ 6.603261] PHYS_OFFSET: 0xffffd0a7c0000000 [ 6.607454] CPU features: 0x10002,21806008 [ 6.611558] Memory Limit: none And now that ocelot->ptp_clock is checked at exit, prevent a potential error where ptp_clock_register returned a pointer-encoded error, which we are keeping in the ocelot private data structure. So now, ocelot->ptp_clock is now either NULL or a valid pointer. Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support") Cc: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Danit Goldberg authored
In addition to filling the node_guid and port_guid attributes, there is a need to populate VF index too, otherwise users of netlink interface will see same VF index for all VFs. Fixes: 30aad417 ("net/core: Add support for getting VF GUIDs") Signed-off-by:
Danit Goldberg <danitg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Nikolay Aleksandrov authored
We have an interesting memory leak in the bridge when it is being unregistered and is a slave to a master device which would change the mac of its slaves on unregister (e.g. bond, team). This is a very unusual setup but we do end up leaking 1 fdb entry because dev_set_mac_address() would cause the bridge to insert the new mac address into its table after all fdbs are flushed, i.e. after dellink() on the bridge has finished and we call NETDEV_UNREGISTER the bond/team would release it and will call dev_set_mac_address() to restore its original address and that in turn will add an fdb in the bridge. One fix is to check for the bridge dev's reg_state in its ndo_set_mac_address callback and return an error if the bridge is not in NETREG_REGISTERED. Easy steps to reproduce: 1. add bond in mode != A/B 2. add any slave to the bond 3. add bridge dev as a slave to the bond 4. destroy the bridge device Trace: unreferenced object 0xffff888035c4d080 (size 128): comm "ip", pid 4068, jiffies 4296209429 (age 1413.753s) hex dump (first 32 bytes): 41 1d c9 36 80 88 ff ff 00 00 00 00 00 00 00 00 A..6............ d2 19 c9 5e 3f d7 00 00 00 00 00 00 00 00 00 00 ...^?........... backtrace: [<00000000ddb525dc>] kmem_cache_alloc+0x155/0x26f [<00000000633ff1e0>] fdb_create+0x21/0x486 [bridge] [<0000000092b17e9c>] fdb_insert+0x91/0xdc [bridge] [<00000000f2a0f0ff>] br_fdb_change_mac_address+0xb3/0x175 [bridge] [<000000001de02dbd>] br_stp_change_bridge_id+0xf/0xff [bridge] [<00000000ac0e32b1>] br_set_mac_address+0x76/0x99 [bridge] [<000000006846a77f>] dev_set_mac_address+0x63/0x9b [<00000000d30738fc>] __bond_release_one+0x3f6/0x455 [bonding] [<00000000fc7ec01d>] bond_netdev_event+0x2f2/0x400 [bonding] [<00000000305d7795>] notifier_call_chain+0x38/0x56 [<0000000028885d4a>] call_netdevice_notifiers+0x1e/0x23 [<000000008279477b>] rollback_registered_many+0x353/0x6a4 [<0000000018ef753a>] unregister_netdevice_many+0x17/0x6f [<00000000ba854b7a>] rtnl_delete_link+0x3c/0x43 [<00000000adf8618d>] rtnl_dellink+0x1dc/0x20a [<000000009b6395fd>] rtnetlink_rcv_msg+0x23d/0x268 Fixes: 43598813 ("bridge: add local MAC address to forwarding table (v2)") Reported-by: syzbot+2add91c08eb181fea1bf@syzkaller.appspotmail.com Signed-off-by:Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Dan Carpenter authored
We have to free "dev->name_node" on this error path. Fixes: ff927412 ("net: introduce name_node struct to be used in hashlist") Reported-by: syzbot+6e13e65ffbaa33757bcb@syzkaller.appspotmail.com Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.5-20191203' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-12-03 this is a pull request of 6 patches for net/master. The first two patches are against the MAINTAINERS file and adds Appana Durga Kedareswara rao as maintainer for the xilinx-can driver and Sriram Dash for the m_can (mmio) driver. The next patch is by Jouni Hogander and fixes a use-after-free in the slcan driver. Johan Hovold's patch for the ucan driver fixes the non-atomic allocation in the completion handler. The last two patches target the xilinx-can driver. The first one is by Venkatesh Yadav Abbarapu and skips the error message on deferred probe, the second one is by Srinivas Neeli and fixes the usage of the skb after can_put_echo_skb(). ==================== Signed-off-by:
-
Srinivas Neeli authored
As per linux can framework, driver not allowed to touch the skb memory after can_put_echo_skb() call. This patch fixes the same. https://www.spinics.net/lists/linux-can/msg02199.htmlSigned-off-by:
Srinivas Neeli <srinivas.neeli@xilinx.com> Reviewed-by:
Appana Durga Kedareswara Rao <appana.durga.rao@xilinx.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Venkatesh Yadav Abbarapu authored
When the CAN bus clock is provided from the clock wizard, clock wizard driver may not be available when can driver probes resulting to the error message "bus clock not found error". As this error message is not very useful to the end user, skip printing in the case of deferred probe. Signed-off-by:
Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com> Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Reviewed-by:
-
Johan Hovold authored
USB completion handlers are called in atomic context and must specifically not allocate memory using GFP_KERNEL. Fixes: 9f2d3eae ("can: ucan: add driver for Theobroma Systems UCAN devices") Cc: stable <stable@vger.kernel.org> # 4.19 Cc: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Cc: Martin Elshuber <martin.elshuber@theobroma-systems.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jouni Hogander authored
Slcan_open doesn't clean-up device which registration failed from the slcan_devs device list. On next open this list is iterated and freed device is accessed. Fix this by calling slc_free_netdev in error path. Driver/net/can/slcan.c is derived from slip.c. Use-after-free error was identified in slip_open by syzboz. Same bug is in slcan.c. Here is the trace from the Syzbot slip report: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:634 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 sl_sync drivers/net/slip/slip.c:725 [inline] slip_open+0xecd/0x11b7 drivers/net/slip/slip.c:801 tty_ldisc_open.isra.0+0xa3/0x110 drivers/tty/tty_ldisc.c:469 tty_set_ldisc+0x30e/0x6b0 drivers/tty/tty_ldisc.c:596 tiocsetd drivers/tty/tty_io.c:2334 [inline] tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2594 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xdb6/0x13e0 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: ed50e160 ("slcan: Fix memory leak in error path") Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: David Miller <davem@davemloft.net> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
Jouni Hogander <jouni.hogander@unikie.com> Cc: linux-stable <stable@vger.kernel.org> # >= v5.4 Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Sriram Dash authored
Since we are actively working on MMIO MCAN device driver, as discussed with Marc, I am adding myself as a maintainer. Signed-off-by:
Sriram Dash <sriram.dash@samsung.com> Signed-off-by:
-
Appana Durga Kedareswara rao authored
Added entry for xilinx CAN driver. Signed-off-by:
-
- 02 Dec, 2019 12 commits
-
-
Martin Varghese authored
The skb_mpls_pop was not updating ethertype of an ethernet packet if the packet was originally received from a non ARPHRD_ETHER device. In the below OVS data path flow, since the device corresponding to port 7 is an l3 device (ARPHRD_NONE) the skb_mpls_pop function does not update the ethertype of the packet even though the previous push_eth action had added an ethernet header to the packet. recirc_id(0),in_port(7),eth_type(0x8847), mpls(label=12/0xfffff,tc=0/0,ttl=0/0x0,bos=1/1), actions:push_eth(src=00:00:00:00:00:00,dst=00:00:00:00:00:00), pop_mpls(eth_type=0x800),4 Fixes: ed246cee ("net: core: move pop MPLS functionality from OvS to core helper") Signed-off-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Victorien Molle authored
This field has never been checked since introduction in mainline kernel Signed-off-by:
Victorien Molle <victorien.molle@wifirst.fr> Signed-off-by:
Florent Fourcot <florent.fourcot@wifirst.fr> Fixes: 2db6dc26 "sch_cake: Make gso-splitting configurable from userspace" Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2019-12-02 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 6 day(s) which contain a total of 10 files changed, 60 insertions(+), 51 deletions(-). The main changes are: 1) Fix vmlinux BTF generation for binutils pre v2.25, from Stanislav Fomichev. 2) Fix libbpf global variable relocation to take symbol's st_value offset into account, from Andrii Nakryiko. 3) Fix libbpf build on powerpc where check_abi target fails due to different readelf output format, from Aurelien Jarno. 4) Don't set BPF insns RO for the case when they are JITed in order to avoid fragmenting the direct map, from Daniel Borkmann. 5) Fix static checker warning in btf_distill_func_proto() as well as a build error due to empty enum when BPF is compiled out, from Alexei Starovoitov. 6) Fix up generation of bpf_helper_defs.h for perf, from Arnaldo Carvalho de Melo. ==================== Signed-off-by: -
Aurelien Jarno authored
On powerpc with recent versions of binutils, readelf outputs an extra field when dumping the symbols of an object file. For example: 35: 0000000000000838 96 FUNC LOCAL DEFAULT [<localentry>: 8] 1 btf_is_struct The extra "[<localentry>: 8]" prevents the GLOBAL_SYM_COUNT variable to be computed correctly and causes the check_abi target to fail. Fix that by looking for the symbol name in the last field instead of the 8th one. This way it should also cope with future extra fields. Signed-off-by:Aurelien Jarno <aurelien@aurel32.net> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/bpf/20191201195728.4161537-1-aurelien@aurel32.net
-
Linus Torvalds authored
Merge updates from Andrew Morton: "Incoming: - a small number of updates to scripts/, ocfs2 and fs/buffer.c - most of MM I still have quite a lot of material (mostly not MM) staged after linux-next due to -next dependencies. I'll send those across next week as the preprequisites get merged up" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits) mm/page_io.c: annotate refault stalls from swap_readpage mm/Kconfig: fix trivial help text punctuation mm/Kconfig: fix indentation mm/memory_hotplug.c: remove __online_page_set_limits() mm: fix typos in comments when calling __SetPageUptodate() mm: fix struct member name in function comments mm/shmem.c: cast the type of unmap_start to u64 mm: shmem: use proper gfp flags for shmem_writepage() mm/shmem.c: make array 'values' static const, makes object smaller userfaultfd: require CAP_SYS_PTRACE for UFFD_FEATURE_EVENT_FORK fs/userfaultfd.c: wp: clear VM_UFFD_MISSING or VM_UFFD_WP during userfaultfd_register() userfaultfd: wrap the common dst_vma check into an inlined function userfaultfd: remove unnecessary WARN_ON() in __mcopy_atomic_hugetlb() userfaultfd: use vma_pagesize for all huge page size calculation mm/madvise.c: use PAGE_ALIGN[ED] for range checking mm/madvise.c: replace with page_size() in madvise_inject_error() mm/mmap.c: make vma_merge() comment more easy to understand mm/hwpoison-inject: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops autonuma: reduce cache footprint when scanning page tables autonuma: fix watermark checking in migrate_balanced_pgdat() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix several scatter gather list issues in kTLS code, from Jakub Kicinski. 2) macb driver device remove has to kill the hresp_err_tasklet. From Chuhong Yuan. 3) Several memory leak and reference count bug fixes in tipc, from Tung Nguyen. 4) Fix mlx5 build error w/o ipv6, from Yue Haibing. 5) Fix jumbo frame and other regressions in r8169, from Heiner Kallweit. 6) Undo some BUG_ON()'s and replace them with WARN_ON_ONCE and proper error propagation/handling. From Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (24 commits) openvswitch: remove another BUG_ON() openvswitch: drop unneeded BUG_ON() in ovs_flow_cmd_build_info() net: phy: realtek: fix using paged operations with RTL8105e / RTL8208 r8169: fix resume on cable plug-in r8169: fix jumbo configuration for RTL8168evl net: emulex: benet: indent a Kconfig depends continuation line selftests: forwarding: fix race between packet receive and tc check net: sched: fix `tc -s class show` no bstats on class with nolock subqueues net: ethernet: ti: ale: ensure vlan/mdb deleted when no members net/mlx5e: Fix build error without IPV6 selftests: pmtu: use -oneline for ip route list cache tipc: fix duplicate SYN messages under link congestion tipc: fix wrong timeout input for tipc_wait_for_cond() tipc: fix wrong socket reference counter after tipc_sk_timeout() returns tipc: fix potential memory leak in __tipc_sendmsg() net: macb: add missed tasklet_kill selftests: bpf: correct perror strings selftests: bpf: test_sockmap: handle file creation failures gracefully net/tls: use sg_next() to walk sg entries net/tls: remove the dead inplace_crypto code ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Various fixes: - Fix the PAT performance regression that downgraded write-combining device memory regions to uncached. - There's been a number of bugs in 32-bit double fault handling - hopefully all fixed now. - Fix an LDT crash - Fix an FPU over-optimization that broke with GCC9 code optimizations. - Misc cleanups" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/pat: Fix off-by-one bugs in interval tree search x86/ioperm: Save an indentation level in tss_update_io_bitmap() x86/fpu: Don't cache access to fpu_fpregs_owner_ctx x86/entry/32: Remove unused 'restore_all_notrace' local label x86/ptrace: Document FSBASE and GSBASE ABI oddities x86/ptrace: Remove set_segment_reg() implementations for current x86/traps: die() instead of panicking on a double fault x86/doublefault/32: Rewrite the x86_32 #DF handler and unify with 64-bit x86/doublefault/32: Move #DF stack and TSS to cpu_entry_area x86/doublefault/32: Rename doublefault.c to doublefault_32.c x86/traps: Disentangle the 32-bit and 64-bit doublefault code lkdtm: Add a DOUBLE_FAULT crash type on x86 selftests/x86/single_step_syscall: Check SYSENTER directly x86/mm/32: Sync only to VMALLOC_END in vmalloc_sync_all() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: - Make /sys/devices/cpu/rdpmc based RDPMC enforcement more instantaneous - decoder: Update the Intel opcode map - Various tooling fixes, including a few late optimizations and cleanups. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) perf script: Fix invalid LBR/binary mismatch error perf script: Fix brstackinsn for AUXTRACE perf affinity: Add infrastructure to save/restore affinity perf pmu: Use file system cache to optimize sysfs access perf regs: Make perf_reg_name() return "unknown" instead of NULL perf diff: Use llabs() with 64-bit values perf diff: Use llabs() with 64-bit values perf/x86: Implement immediate enforcement of /sys/devices/cpu/rdpmc value of 0 perf tools: Allow to link with libbpf dynamicaly perf tests: Rename tests/map_groups.c to tests/maps.c perf tests: Rename thread-mg-share to thread-maps-share perf maps: Rename map_groups.h to maps.h perf maps: Rename 'mg' variables to 'maps' perf map_symbol: Rename ms->mg to ms->maps perf addr_location: Rename al->mg to al->maps perf thread: Rename thread->mg to thread->maps perf maps: Merge 'struct maps' with 'struct map_groups' x86/insn: perf tools: Add some more instructions to the new instructions test x86/insn: Add some more Intel instructions to the opcode map perf map: Remove unused functions ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: - updates to Ilitech driver to support ILI2117 - face lift of st1232 driver to support MT-B protocol - a new driver for i.MX system controller keys - mpr121 driver now supports polling mode - various input drivers have been switched away from input_polled_dev to use polled mode of regular input devices - other assorted cleanups and fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (70 commits) Input: synaptics-rmi4 - fix various V4L2 compliance problems in F54 Input: synaptics - switch another X1 Carbon 6 to RMI/SMbus Input: fix Kconfig indentation Input: imx_sc_key - correct SCU message structure to avoid stack corruption Input: ili210x - optionally show calibrate sysfs attribute Input: ili210x - add resolution to chip operations structure Input: ili210x - do not retrieve/print chip firmware version Input: mms114 - use device_get_match_data Input: ili210x - remove unneeded suspend and resume handlers Input: ili210x - do not unconditionally mark touchscreen as wakeup source Input: ili210x - define and use chip operations structure Input: ili210x - do not set parent device explicitly Input: ili210x - handle errors from input_mt_init_slots() Input: ili210x - switch to using threaded IRQ Input: ili210x - add ILI2117 support dt-bindings: input: touchscreen: ad7879: generic node names in example Input: ar1021 - fix typo in preprocessor macro name Input: synaptics-rmi4 - simplify data read in rmi_f54_work Input: kxtj9 - switch to using polled mode of input devices Input: kxtj9 - switch to using managed resources ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm updates from Dan Williams: "The highlight this cycle is continuing integration fixes for PowerPC and some resulting optimizations. Summary: - Updates to better support vmalloc space restrictions on PowerPC platforms. - Cleanups to move common sysfs attributes to core 'struct device_type' objects. - Export the 'target_node' attribute (the effective numa node if pmem is marked online) for regions and namespaces. - Miscellaneous fixups and optimizations" * tag 'libnvdimm-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits) MAINTAINERS: Remove Keith from NVDIMM maintainers libnvdimm: Export the target_node attribute for regions and namespaces dax: Add numa_node to the default device-dax attributes libnvdimm: Simplify root read-only definition for the 'resource' attribute dax: Simplify root read-only definition for the 'resource' attribute dax: Create a dax device_type libnvdimm: Move nvdimm_bus_attribute_group to device_type libnvdimm: Move nvdimm_attribute_group to device_type libnvdimm: Move nd_mapping_attribute_group to device_type libnvdimm: Move nd_region_attribute_group to device_type libnvdimm: Move nd_numa_attribute_group to device_type libnvdimm: Move nd_device_attribute_group to device_type libnvdimm: Move region attribute group definition libnvdimm: Move attribute groups to device type libnvdimm: Remove prototypes for nonexistent functions libnvdimm/btt: fix variable 'rc' set but not used libnvdimm/pmem: Delete include of nd-core.h libnvdimm/namespace: Differentiate between probe mapping and runtime mapping libnvdimm/pfn_dev: Don't clear device memmap area during generic namespace probe libnvdimm: Trivial comment fix ... -
git://git.linaro.org/landing-teams/working/fujitsu/integrationLinus Torvalds authored
Pull mailbox updates from Jassi Brar: - omap : misc - catch error returned from pm_runtime_put_sync - hisi : misc - drop .owner from platform_driver - stm : change how wakeup is handled - imx : fix - bailout on error and nuke correct irq - imx : add support for imx7ulp platform * tag 'mailbox-v5.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: imx: add support for imx v1 mu dt-bindings: mailbox: imx-mu: add imx7ulp MU support mailbox: imx: Clear the right interrupts at shutdown mailbox: imx: Fix Tx doorbell shutdown path mailbox: stm32-ipcc: Update wakeup management mailbox: no need to set .owner platform_driver_register mailbox/omap: Handle if CONFIG_PM is disabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteprocLinus Torvalds authored
Pull hwspinlock updates from Bjorn Andersson: "This contains a number of cleanups to the core and several drivers, in particular removing the requirement for drivers to implement pm_runtime. It also udpates the location of the git tree in MAINTAINERS" * tag 'hwlock-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: hwspinlock: u8500_hsem: Remove redundant PM runtime implementation hwspinlock: sprd: Remove redundant PM runtime implementation hwspinlock: Let the PM runtime can be optional hwspinlock: Remove BUG_ON() from the hwspinlock core hwspinlock: sprd: Use devm_hwspin_lock_register() to register hwlock controller hwspinlock: sprd: Use devm_add_action_or_reset() for calls to clk_disable_unprepare() hwspinlock: sprd: Check the return value of clk_prepare_enable() hwspinlock: sprd: Change to use devm_platform_ioremap_resource() hwspinlock: u8500_hsem: Use devm_hwspin_lock_register() to register hwlock controller hwspinlock: u8500_hsem: Use devm_kzalloc() to allocate memory hwspinlock: u8500_hsem: Change to use devm_platform_ioremap_resource() MAINTAINERS: hwspinlock: update git tree location
-
