- 30 Mar, 2009 40 commits
-
-
Martin Fuzzey authored
Call pwc_construct before trying to talk to device to obtain vc interface so that LED and power setup works the first time the video device is opened. Signed-off-by:
Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Robert Millan authored
My BTTV_BOARD_CONCEPTRONIC_CTVFMI2 card wasn't auto-detected, here's a patch that adds its PCI id. lspci -nnv output: 05:06.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11) 05:06.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11) Press <break> within 3 seconds if this is wrong. Signed-off-by: -
Jean Delvare authored
When unloading the cx8800 driver I sometimes get a general protection fault. Analysis revealed a race in cx88_ir_stop(). It can be solved by using a delayed work instead of a timer for infrared input polling. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Jean Delvare authored
The removal of the timer which polls the infrared input is racy. Replacing the timer with a delayed work solves the problem. Signed-off-by:
-
Jean Delvare authored
The removal of the timer which polls the infrared input is racy. Replacing the timer with a delayed work solves the problem. Signed-off-by:
-
Jean Delvare authored
The removal of the timer which polls the infrared input is racy. Replacing the timer with a delayed work solves the problem. Signed-off-by:
-
Trent Piepho authored
It reduces the size of the driver over all, and the function names in strings need to be manually kept up to date while __func__ doesn't. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Trent Piepho authored
Many functions had a struct file pointer argument, but all they wants is the struct zoran_fh pointer from the file's private data. Since every caller of those functions already has the zoran_fh, just pass the that instead. This saves a dereference in each function change. While I'm at it, change the code formatting of affected functions to be kernel standard style. Signed-off-by:
-
Jean Delvare authored
kmalloc() can fail for large video buffers. By default the kernel complains loudly about allocation failures, but we don't want to frighten the user, so ask kmalloc() to keep quiet on such failures. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Jean Delvare authored
The lock_norm module parameter doesn't look terribly useful. If you don't want to change the norm, just don't change it. As a matter of fact, no other v4l driver has such a parameter. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Trent Piepho authored
The zoran driver had two kinds of buffer descriptors, one for jpg buffers and one for raw buffers. They were mostly the same with only a couple Signed-off-by: -
Michael Krufky authored
Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
replace occurances of "HVR1150" with "HVR1120" - this was a typo. Signed-off-by:
-
Hans Verkuil authored
There are no drivers left that call msp3400 with V4L1 commands. Remove it from this driver. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
The code to optimize the usercopy only checked the ioctl NR field. However, this code is also called for non-V4L2 ioctls (either private or ioctls from linux/dvb/audio.h and linux/dvb/video.h for decoder drivers like ivtv). If such an ioctl has the same NR as a V4L2 ioctl, then disaster strikes. Modified the code to check on the full command ID. Thanks to Martin Dauskardt for tracing the ivtv breakage to this particular change. Signed-off-by:
-
Hans Verkuil authored
This driver isn't used in any legacy mode, so no need for v4l2-i2c-drv-legacy.h. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
As announced VIDIOC_G_CHIP_IDENT_OLD is now removed for 2.6.30. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
changeset 04934e44e3784a1b969582e2d59afcec278470c6 removed the last implementation that were still using the V4L1 obsoleted header. Now, video_decoder.h is not used anymore by any driver. Let's remove it and all references for it in Kernel. Signed-off-by: -
Michael Krufky authored
There was never any build-time dependency of the dib0700 usb module on the dib0070 tuner module. Now that the build-time dependencies of dib0700 on dib3000mc, dib7000p and dib7000m have been removed in the previous changesets, we can enable DVB_FE_CUSTOMISE for these modules under config DVB_USB_DIB0700 Signed-off-by:
-
Michael Krufky authored
This function prototype is defined but the function itself does not exist. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
af9013 is not a development tool. It is, instead, a DVB-T module. Signed-off-by: -
Hans Verkuil authored
It's much nicer if the log message tells you which io ports are possible, rather than having to run modinfo or look it up in the source or manual. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
